Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “NATURAL”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29

Purification and preparation of graphite oxide from natural graphite

Graphite oxide has attracted much interest as a possible route for preparation of natural graphite in the large-scale production and manipulation of graphene as a material with extraordinary electronic properties. Graphite oxide was prepared by modified Hummers method from purified natural graphite sample from West Kalimantan. We demonstrated that natural graphite is well-purified by acid leaching method. The purified graphite was proceed for intercalating process by modifying Hummers method. The modification is on the reaction time and temperature of the intercalation process. The materials used in the intercalating process are H{sub 2}SO{sub 4} and KMNO{sub 4}. The purified natural graphite is analyzed by carbon content based on Loss on Ignition test. The thermo gravimetricanalysis and the Fouriertransform infrared spectroscopy are performed to investigate the oxidation results of the obtained GO which is indicated by the existence of functional groups. In addition, the X-ray diffraction and energy dispersive X-ray spectroscopy are also applied to characterize respectively for the crystal structure and elemental analysis. The results confirmed that natural graphite samples with 68% carbon content was purified into 97.68 % carbon content. While the intercalation process formed a formation of functional groups in the obtained GO. The results show that the temperature and reaction times have improved the efficiency of the oxidation process. It is concluded that these method could be considered as an important route for large-scale production of graphene.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Linear-scaling quadruple excitations in local pair natural orbital coupled-cluster theory

Here, we present a fast, asymptotically linear-scaling implementation of the perturbative quadruples energy correction in coupled-cluster theory using local natural orbitals. Our work follows the domain-based local pair natural orbital (DLPNO) approach previously applied to lower levels of excitations in coupled-cluster theory. Our DLPNO-CCSDT(Q) algorithm uses converged doubles and triples amplitudes from a preceding DLPNO-CCSDT computation to compute the quadruples amplitude and energy in the quadruples natural orbital (QNO) basis. We demonstrate the compactness of the QNO space, showing that more than 95% of the (Q) correction can be recovered using relatively loose natural orbital cutoffs, compared to the tighter cutoffs used in pair and triples natural orbitals at lower levels of coupled-cluster theory. We also highlight the accuracy of our algorithm in the computation of relative energies, which yields deviations of sub-kJ mol −1 in relative energy compared to the canonical CCSDT(Q). Timings are conducted on a series of growing linear alkanes (up to 10 carbons and 608 basis functions) and water clusters (up to 49 water molecules and 2842 basis functions) to establish the asymptotic linear-scaling of our DLPNO-(Q) algorithm.

Auxiliary functions↗

ON THE FORCE-FREE NATURE OF PHOTOSPHERIC SUNSPOT MAGNETIC FIELDS AS OBSERVED FROM HINODE (SOT/SP)

A magnetic field is force-free if there is no interaction between it and the plasma in the surrounding atmosphere, i.e., electric currents are aligned with the magnetic field, giving rise to zero Lorentz force. The computation of various magnetic parameters, such as magnetic energy (using the virial theorem), gradient of twist of sunspot magnetic fields (computed from the force-free parameter {alpha}), and any kind of extrapolation, heavily hinges on the force-free approximation of the photospheric sunspot magnetic fields. Thus, it is of vital importance to inspect the force-free behavior of sunspot magnetic fields. The force-free nature of sunspot magnetic fields has been examined earlier by some researchers, ending with incoherent results. Accurate photospheric vector field measurements with high spatial resolution are required to inspect the force-free nature of sunspots. For this purpose, we use several vector magnetograms of high spatial resolution obtained from the Solar Optical Telescope/Spectro-Polarimeter on board Hinode. Both the necessary and sufficient conditions for force-free nature are examined by checking the global and local nature of equilibrium magnetic forces over sunspots. We find that sunspot magnetic fields are not very far from the force-free configuration, although they are not completely force-free on the photosphere. The umbral and inner penumbral fields are more force-free than the middle and outer penumbral fields. During their evolution, sunspot magnetic fields are found to maintain their proximity to force-free field behavior. Although a dependence of net Lorentz force components is seen on the evolutionary stages of the sunspots, we do not find a systematic relationship between the nature of sunspot magnetic fields and the associated flare activity. Further, we examine whether the fields at the photosphere follow linear or nonlinear force-free conditions. After examining this in various complex and simple sunspots, we conclude that, in either case, photospheric sunspot magnetic fields are closer to satisfying the nonlinear force-free field approximation.

79 ASTRONOMY AND ASTROPHYSICS↗

Natural orbitals for the ab initio no-core configuration interaction approach

Ab initio no-core configuration interaction (NCCI) calculations for the nuclear many-body problem have traditionally relied upon an antisymmetrized product (Slater determinant) basis built from harmonic oscillator orbitals. The accuracy of such calculations is limited by the finite dimensions which are computationally feasible for the truncated many-body space. We therefore seek to improve the accuracy obtained for a given basis size by optimizing the choice of single-particle orbitals. Natural orbitals, which diagonalize the one-body density matrix, provide a basis which maximizes the occupation of low-lying orbitals, thus accelerating convergence in a configuration-interaction basis, while also possibly providing physical insight into the single-particle structure of the many-body wave function. We describe the implementation of natural orbitals in the NCCI framework and examine the nature of the natural orbitals thus obtained, the properties of the resulting many-body wave functions, and the convergence of observables. After taking 3 He as an illustrative testbed, we explore aspects of NCCI calculations with natural orbitals for the ground state of the p-shell neutron halo nucleus 6 He .

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Natural anomaly mediation from the landscape with implications for LHC SUSY searches

Supersymmetric models with the anomaly-mediated supersymmetry (SUSY) breaking (AMSB) form for soft SUSY breaking terms arise in two different settings: (1) extra-dimensional models where SUSY breaking occurs in a sequestered sector, and (2) 4 − d models with dynamical SUSY breaking in a hidden sector where scalars gain masses of order the gravitino mass m 3 / 2 , but gaugino masses and trilinear soft terms are assumed to be of the AMSB form. Both models run into serious conflicts with (1) LHC sparticle and Higgs mass constraints, (2) constraints from winolike weakly interacting massive particle dark matter searches, and (3) bounds from naturalness. These conflicts may be avoided by introducing minor changes to the underlying phenomenological models consisting of nonuniversal bulk scalar Higgs masses and A terms, providing a setting for natural anomaly mediation (nAMSB). In nAMSB, the wino is still expected to be the lightest of the gauginos, but the Higgsinos are expected to be the lightest electroweakinos (EWinos) in accord with naturalness. We examine what sorts of spectra are expected to emerge when nAMSB arises from a string landscape setting: While model 2 can only be natural for a Higgs mass m h ≲ 123 GeV , model 1 can accommodate naturalness along with m h ∼ 125 GeV while still respecting LHC bounds on sparticle masses. We explore the LHC phenomenology of nAMSB models where we find that for Higgsino pair production, typically larger dilepton mass gaps arise from the soft dilepton-plus-jets signature than in models with gaugino mass unification. For wino-pair production, the higher m 3 / 2 portion of nAMSB parameter space is excluded by recent LHC bounds from gaugino pair production searches. We characterize the dominant LHC signatures arising from the remaining lower m 3 / 2 ∼ 90 – 200 TeV range of parameter space, which should be fully testable at high-luminosity LHC via EWino pair production searches. Published by the American Physical Society 2024

Astronomy & Astrophysics↗

Harvesting biofuel grasslands has mixed effects on natural enemy communities and no effects on biocontrol services

Summary Perennial bioenergy systems, such as switchgrass and restored prairies, are alternatives to commonly used annual monocultures such as maize. Perennial systems require lower chemical input, provide greater ecosystem services such as carbon storage, greenhouse gas mitigation and support greater biodiversity of beneficial insects. However, biomass harvest will be necessary in managing these perennial systems for bioenergy production, and it is unclear how repeated harvesting might affect ecosystem services. In this study, we examined how repeated production‐scale harvesting of diverse perennial grasslands influences vegetation structure, natural enemy communities (arthropod predators and parasitoids), and natural biocontrol services in two states (Wisconsin and Michigan, USA) over multiple years. We found that repeated biomass harvest reduced litter biomass and increased bare ground cover. Some natural enemy groups, such as ground‐dwelling arthropods, decreased in abundance with harvest, whereas others such as foliar‐dwelling arthropods increased in abundance. The disparity in responses is likely due to how different taxonomic groups utilize vegetation and differences in dispersal abilities. At the community level, biomass harvest altered community composition, increased total arthropod abundance and decreased evenness but did not influence species richness, diversity or biocontrol services. Harvest effects varied with time, diminishing in strength both within the season (for total abundance and evenness), across seasons (for evenness) or were consistent throughout the duration of the study (for community composition). Greater functional redundancy and compensatory responses of the different taxonomic groups may have buffered against the potentially negative effects of harvest on biocontrol services. Synthesis and applications . Our results show that in the short‐term, repeated harvesting of perennial grasslands (when insect activity is low) consistently altered vegetation structure but had mixed effects on natural enemy communities and no discernible effects on biocontrol services. However, the long‐term effects of repeated harvesting on vegetation structure, natural enemies and other arthropod‐derived ecosystem services such as pollination and decomposition remain largely unknown.

Kim, Tania N.↗

Development and Evaluation of a Mobile Plant to Prepare Natural Gas for Use in Foam Fracturing Treatments

Hydraulic fracturing treatments are used to produce oil and gas reserves that would otherwise not be accessible using traditional production techniques. Fracturing treatments require a significant amount of water, which has an associated environmental impact. In recent work funded by the Department of Energy (DOE), an alternative fracturing process has been investigated that uses natural gas as the primary fracturing fluid. In the investigated method, a high-pressure foam of natural gas and water is used for fracturing, a method than could reduce water usage by as much as 80% (by volume). A significant portion of the work focused on identifying and optimizing a mobile processing facility that can be used to pressurize natural gas sourced from adjacent wells or nearby gas processing plants. This paper discusses some of the evaluated processes capable of producing a high-pressure (10,000 psia) flow of natural gas from a low-pressure source (500 psia). The processes include five refrigeration cycles producing liquefied natural gas as well as a cycle that directly compresses the gas. The identified processes are compared based on their specific energy as calculated from a thermodynamic analysis. Additionally, the processes are compared based on the estimated equipment footprint and the process safety. Details of the thermodynamic analyses used to compare the cycles are provided. This paper also discusses the current state of the art of foam fracturing methods and reviews the advantages of these techniques.

Beck, Griffin↗

Type IV-like pili facilitate transformation in naturally competent archaea

Naturally competent organisms are capable of DNA uptake directly from the environment through the process of transformation. Despite the importance of transformation to microbial evolution, DNA uptake remains poorly characterized outside the bacterial domain. Here, we identify the pilus as a necessary component of the transformation machinery in archaea. We describe two naturally competent organisms: Methanococcus maripaludis and Methanoculleus thermophilus. In M. maripaludis, replicative vectors were transferred with an average efficiency of 2.4 x 10 3 transformants μg -1 DNA. In M. thermophilus, integrative vectors were transferred with an average efficiency of 2.7 x 10 3 transformants μg -1 DNA. Additionally, natural transformation of M. thermophilus could be used to introduce chromosomal mutations. To our knowledge, this is the first demonstration of a method to introduce targeted mutations in a member of the order Methanomicrobiales. For both organisms, mutants lacking structural components of the type IV-like pilus filament were defective for DNA uptake, demonstrating the importance of pili for natural transformation. Interestingly, competence could be induced in a non-competent strain of M. maripaludis by expressing pilin genes from a replicative vector. Furthermore, these results expand the known natural competence pili to include examples from the archaeal domain and highlight the importance of pili for DNA uptake in diverse microbial organisms.

59 BASIC BIOLOGICAL SCIENCES↗

Is natural higgsino-only dark matter excluded?

The requirement of electroweak naturalness in supersymmetric (SUSY) models of particle physics necessitates light higgsinos not too far from the weak scale characterized by m(weak)~ m(W,Z,h)~100 GeV. On the other hand, LHC Higgs mass measurements and sparticle mass limits point to a SUSY breaking scale in the multi-TeV regime. Under such conditions, the lightest SUSY particle is expected to be a mainly higgsino-like neutralino with non-negligible gaugino components (required by naturalness). The computed thermal WIMP abundance in natural SUSY models is then found to be typically a factor 5-20 below its measured value. To gain concordance with observations, either an additional DM particle (the axion is a well-motivated possibility) must be present or additional non-thermal mechanisms must augment the neutralino abundance. We compare present direct and indirect WIMP detection limits to three natural SUSY models based on gravity-, anomaly- and mirage-mediation. We show that the case of natural higgsino-only dark matter where non-thermal production mechanisms augment its relic density, is essentially excluded by a combination of direct detection constraints from PandaX-II, LUX and Xenon-1t experiments, and by bounds from Fermi-LAT/MAGIC observations of gamma rays from dwarf spheroidal galaxies.

79 ASTRONOMY AND ASTROPHYSICS↗

Cost and Performance Baseline for Fossil Energy Plants Volume 3: Low Rank Coal and Natural Gas to Electricity

This report presents an independent assessment of the cost and performance of select fossil energy power systems—pulverized coal (PC), circulating fluidized bed (CFB), and natural gas combined cycle (NGCC) plants—using a systematic, transparent technical and economic approach. This is Volume 3 of a five-volume series, which comprise the following reports: Volume 1: Bituminous Coal and Natural Gas to Electricity; Volume 2: Coal to Synthetic Natural Gas and Ammonia (Various Coal Ranks); Volume 3: Low Rank Coal and Natural Gas to Electricity; Volume 4: Bituminous Coal to Liquid Fuels; and Volume 5: Natural Gas Electricity Generating Units for Flexible Operation. The cost and performance of fossil fuel-based generation technologies represented in this report (and the series at large) are important inputs to assessments and determinations of technology combinations to be utilized to meet the projected demands of future power markets. In addition to informing technology comparisons, the reference plant configurations found in this report provide perspective for regulators and policy makers. From a research and development perspective, this report is used to assess goals and metrics and to provide a consistent basis for comparing developing technologies.

20 FOSSIL-FUELED POWER PLANTS↗

End-Use Savings Shapes Measure Documentation: Boiler Replacement with Air-Source Heat Pump Boiler and Natural Gas Boiler Backup

Building on the successfully completed effort to calibrate and validate the U.S. Department of Energy's ResStock (™) and ComStock (™) models over the past three years, the objective of this work is to produce national data sets that empower analysts working for federal, state, utility, city, and manufacturer stakeholders to answer a broad range of analysis questions. The goal of this work is to develop energy efficiency, electrification, and demand flexibility end-use load shapes (electricity, gas, propane, or fuel oil) that cover a majority of the high-impact, market-ready (or nearly market-ready) measures. "Measures" refers to energy efficiency variables that can be applied to buildings during modeling. An end-use savings shape is the difference in energy consumption between a baseline building and a building with an energy efficiency, electrification, or demand flexibility measure applied. It results in a time-series profile that is broken down by end use and fuel (electricity or on-site gas, propane, or fuel oil use) at each timestep. ComStock is a highly granular, bottom-up model that uses multiple data sources, statistical sampling methods, and advanced building energy simulations to estimate the annual subhourly energy consumption of the commercial building stock across the United States. The baseline model intends to represent the U.S. commercial building stock as it existed in 2018. The methodology and results of the baseline model are discussed in the final technical report of the End-Use Load Profiles project. This documentation focuses on a single end-use savings shape measure - boiler replacement with air-source heat pump boiler with natural gas boiler backup. This measure replaces natural gas boilers for HVAC application by air-source heat pump boilers when applicable and use natural gas boiler backup when the heat pump boiler could not operate due to outdoor air conditions which are below its cutoff temperature. This measure helps to quantify the decarbonization as well as the energy savings potential from the replacement. The measure resulted higher savings in natural gas consumption compared to the increase in electricity consumption, with a ratio of 3. The total natural gas energy consumption was reduced by 41%, whereas the total electricity consumption was increased by 5.3%.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

A synthetic ecology perspective: How well does behavior of model organisms in the laboratory predict microbial activities in natural habitats?

In this perspective article, we question how well model organisms, the ones that are easy to cultivate in the laboratory and that show robust growth and biomass accumulation, reflect the dynamics and interactions of microbial communities observed in nature. Today's -omics toolbox allows assessing the genomic potential of microbes in natural environments in a high-throughput fashion and at a strain-level resolution. However, understanding of the details of microbial activities and of the mechanistic bases of community function still requires experimental validation in simplified and fully controlled systems such as synthetic communities. We have studied methane utilization in Lake Washington sediment for a few decades and have identified a number of species genetically equipped for this activity. We have also identified cooccurring satellite species that appear to form functional communities together with the methanotrophs. Here, we compare experimental findings from manipulation of natural communities involved in metabolism of methane in this niche with findings from manipulation of synthetic communities assembled in the laboratory of species originating from the same study site, from very simple (two-species) to rather complex (50-species) synthetic communities. We observe some common trends in community dynamics between the two types of communities, toward representation of specific functional guilds. However, we also identify strong discrepancies between the dominant methane oxidizers in synthetic communities compared to natural communities, under similar incubation conditions. Furthermore, these findings highlight the challenges that exist in using the synthetic community approach to modeling dynamics and species interactions in natural communities.

59 BASIC BIOLOGICAL SCIENCES↗

Polymeric Membranes for H2S and CO2 Removal from Natural Gas for Hydrogen Production: A Review

Natural gas, an important source of hydrogen, is expected to be crucial in the transition to a hydrogen-based economy. The landscape of the gas processing industry is set to change in the near future with the development of highly acidic sour gas wells. Natural gas purification constitutes a major share of the gas separation membrane market, and the shift to low-quality sour gas wells has been mirrored in the trends of membrane material research. Purification also constitutes the major portion of the cost of natural gas, posing implications for the cost of hydrogen production. This review provides an update on the current state of research regarding polymeric membranes for H2S removal, along with CO2 separation, from natural gas that is used for hydrogen production via steam methane reforming. The challenges of adapting polymeric membranes to ternary H2S/CO2/CH4 separations are discussed in detail. Key polymeric materials are highlighted, and the prospects for their application in H2S removal from natural gas are evaluated. Finally, the growing interest in H2 production from H2S is discussed. Advances in the membrane industry and the emergence of new membrane materials may significantly improve the commercial viability of such processes.

Rao, Shraavya↗

Optimizing Deep Learning Models for Climate-Related Natural Disaster Detection from UAV Images and Remote Sensing Data

This research study utilized artificial intelligence (AI) to detect natural disasters from aerial images. Flooding and desertification were two natural disasters taken into consideration. The Climate Change Dataset was created by compiling various open-access data sources. This dataset contains 6334 aerial images from UAV (unmanned aerial vehicles) images and satellite images. The Climate Change Dataset was then used to train Deep Learning (DL) models to identify natural disasters. Four different Machine Learning (ML) models were used: convolutional neural network (CNN), DenseNet201, VGG16, and ResNet50. These ML models were trained on our Climate Change Dataset so that their performance could be compared. DenseNet201 was chosen for optimization. All four ML models performed well. DenseNet201 and ResNet50 achieved the highest testing accuracies of 99.37% and 99.21%, respectively. This research project demonstrates the potential of AI to address environmental challenges, such as climate change-related natural disasters. This study’s approach is novel by creating a new dataset, optimizing an ML model, cross-validating, and presenting desertification as one of our natural disasters for DL detection. Three categories were used (Flooded, Desert, Neither). Our study relates to AI for Climate Change and Environmental Sustainability. Drone emergency response would be a practical application for our research project.

AI↗

Data from: Harvesting biofuel grasslands has mixed effects on natural enemy communities and no effects on biocontrol services

1.Perennial bioenergy systems, such as switchgrass and restored prairies, are alternatives to commonly used annual monocultures such as maize. Perennial systems require lower chemical input, provide greater ecosystem services such as carbon storage, greenhouse gas mitigation, and support greater biodiversity of beneficial insects. However, biomass harvest will be necessary in managing these perennial systems for bioenergy production, and it is unclear how repeated harvesting might affect ecosystem services. 2.In this study, we examined how repeated production-scale harvesting of diverse perennial grasslands influences vegetation structure, natural enemy communities (arthropod predators and parasitoids), and natural biocontrol services in two states (Wisconsin and Michigan, USA) over multiple years. 3.We found that repeated biomass harvest reduced litter biomass and increased bare ground cover. Some natural enemy groups, such as ground-dwelling arthropods, decreased in abundance with harvest whereas others, such as foliar-dwelling arthropods increased in abundance. The disparity in responses is likely due to how different taxonomic groups utilize vegetation and differences in dispersal abilities. 4.At the community level, biomass harvest altered community composition, increased total arthropod abundance, and decreased evenness but did not influence species richness, diversity, or biocontrol services. Harvest effects varied with time, diminishing in strength both within the season (for total abundance and evenness), across seasons (for evenness), or were consistent throughout the duration of the study (for community composition). Greater functional redundancy and compensatory responses of the different taxonomic groups may have buffered against the potentially negative effects of harvest on biocontrol services. 5.Synthesis and applications. Our results show that in the short-term, repeated harvesting of perennial grasslands (when insect activity is low) consistently altered vegetation structure but had mixed effects on natural enemy communities and no discernable effects on biocontrol services. However, the long-term effects of repeated harvesting on vegetation structure, natural enemies, and other arthropod-derived ecosystem services such as pollination and decomposition remain largely unknown.

09 BIOMASS FUELS↗

The application of forest classification from Landsat data as a basis for natural hydrocarbon emission estimation and photochemical oxidant model simulations in southeastern Virginia

The possible contribution by natural hydrocarbon emissions to the total ozone budget recorded in the Tidewater region of southeastern Virginia during the height of the summer period was examined. Natural sources investigated were limited to the primary HC emitters and most prevalent natural vegetation, the forests. Three types and their areal coverage were determined for Region VI of the Virginia State Air Pollution Control Board using remotely sensed data from Landsat, a NASA experimental earth resources satellite. Emission factors appropriate to the specific types (coniferous 0.24 x 10 to the 13th, mixed 0.63 x 10 to the 13th, deciduous 1.92 x 10 to the 13th, microgram/h), derived from contemporary procedures, were applied to produce an overall regional emission rate of 2.79 x 10 to the 13th microgram/h for natural non-methane hydrocarbons (NMHC). This rate was used with estimates of the anthropogenic NO(x) and NMHC loading, as input into a photochemical box model. Additional HC loading on the order of that estimated to be produced by the natural forest communities was required in order to reach certain measured summer peak ozone levels as the computer simulation was unable to account for the measured episodic levels on the basis of the anthropogenic inventory alone.

Salop, J.↗

An experimental and theoretical study of the ice accretion process during artificial and natural icing conditions

Real-time measurements of ice growth during artificial and natural icing conditions were conducted using an ultrasonic pulse-echo technique. This technique allows ice thickness to be measured with an accuracy of + or - 0.5 mm; in addition, the ultrasonic signal characteristics may be used to detect the presence of liquid on the ice surface and hence discern wet and dry ice growth behavior. Ice growth was measured on the stagnation line of a cylinder exposed to artificial icing conditions in the NASA Lewis Icing Research Tunnel (IRT), and similarly for a cylinder exposed in flight to natural icing conditions. Ice thickness was observed to increase approximately linearly with exposure time during the initial icing period. The ice accretion rate was found to vary with cloud temperature during wet ice growth, and liquid runback from the stagnation region was inferred. A steady-state energy balance model for the icing surface was used to compare heat transfer characteristics for IRT and natural icing conditions. Ultrasonic measurements of wet and dry ice growth observed in the IRT and in flight were compared with icing regimes predicted by a series of heat transfer coefficients. The heat transfer magnitude was generally inferred to be higher for the IRT than for the natural icing conditions encountered in flight. An apparent variation in the heat transfer magnitude was also observed for flights conducted through different natural icing-cloud formations.

Kirby, Mark S.↗

An experimental study of natural and forced modes in an axisymmetric jet

The experiment consisted of two parts. The first part was an effort to study naturally occurring instability modes in the axisymmetric shear layer of a high Reynolds number turbulent jet. Untripped (transitional) and tripped (turbulent) nozzle exit conditions, both with 0.1 percent core turbulence, were studied. For the turbulent nozzle exit boundary layer case, the core turbulence, was varied systematically from 0.1 to 5 percent of the jet exit velocity. The region up to the end of the potential core was dominated by the axisymmetric mode. The azimuthal modes grew rapidly but dominated only downstream of the potential core region. For the jet excited by natural disturbances, the energy content of the higher order modes (m is less than 1) was significantly lower than that of the axisymmetric and m = +/-1 modes. The initial boundary layer had a profound effect on the natural jet evolution and its excitability. The shorter potential core allowed the jet in the transitional case to support helical disturbances closer the nozzle exit than the turbulent case. The natural jet evolution was found to remain unaffected for varying initial core turbulence over the range of 0.15 to 5 percent of the jet velocity. Target modes for efficient excitation of the jet were determined from the results of the naturally occurring jet instability mode experiments. The second part of this work describes an effort to control the axisymmetric shear layer by artificially exciting target modes. Under optimum conditions, two-frequency excitation is indeed more effective than single frequency plane wave excitation as far as jet mixing is concerned. At high amplitudes of fundamental and subharmonic forcing, the subharmonic augmentation and the axial location of the peak were independent of the initial phase difference. Two-frequency excitation also has its limitations, since axisymmetric waves are damped beyond the potential core. Higher spreading rates are obtained when multi-modal forcing is applied.

Raman, Ganesh↗