Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Molten”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

High Temperature Ternary Chloride Molten Salt Pump

A ternary chloride (MgCl2-NaCl-KCl) molten salt pump has been developed to operate up to 720°C. The design is the result of a thermal, structural and material study of critical components. The vertical overhung pump incorporates first of a kind salt-wetted hydrodynamic bearings. Several bearing material pairings were tested which include: colmonoy grades, stellite grades, and a novel NiWC-based alloy (i.e. HybrimetTM NiWC3b) used as a High Velocity Oxygen Fuel (HVOF) coating. The coating withstands the corrosion effects of the molten salt, and is also used to protect a 316L stainless steel pump reservoir. The pump bowl assembly components are made of Inconel 625. A Nitrogen flushed carbon ring seal is used to keep salt vapors from interacting with external ambient air. Preliminary testing shows a promising pump design for use in the Concentrating Solar Power Gen 3 systems and sets the ground for further development of the HybrimetTM NiWC3b as a competitive alternative to available superalloys.

Handy-Cardenas, Lewis (ORCID:0009000744006972)↗
DOE OSTI2026

Technoeconomic Analysis Round Robin of a Retrofit of the Ivanpah Concentrating Solar Plant with a Molten-Salt System with Thermal Energy Storage

While the fidelity of technoeconomic analysis (TEA) models for concentrating solar thermal systems has improved in recent years, there is a lack of consensus on the specific inputs used to forecast performance of a newly built tower system due to a lack of validations and post-mortems available to the public. This effort is a joint initiative between multiple international organizations to validate and compare their TEA models. The specific case study is a proposed retrofit of one unit of the Ivanpah Solar Energy Generating System to include molten-salt storage, replacing the steam generation system with a molten-salt receiver, salt-to-steam heat exchanger train, and new balance of plant while keeping the existing steam turbine, solar field, and interconnection in place, using plant data for calibration. This manuscript discusses several of the agreed-upon assumptions for this study as well as a preliminary analysis from prior work that motivates the study.

14 SOLAR ENERGY↗
DOE OSTI2020

Actinide and rare earth drawdown system for molten salt recycle

A method for recycling molten salt from electrorefining processes, the method having the steps of collecting actinide metal using a first plurality of cathodes from an electrolyte bath, collecting rare earths metal using a second plurality of cathodes from the electrolyte bath, inserting the collected actinide metal and uranium into the bath, and chlorinating the inserted actinide metal and uranium. Also provided is a system for recycling molten salt, the system having a vessel adapted to receive and heat electrolyte salt, a first plurality of cathodes adapted to be removably inserted into the vessel, a second plurality of cathodes adapted to be removably inserted into the vessel, an anode positioned within the vessel so as to be coaxially aligned with the vessel, and a vehicle for inserting uranium into the salt.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2020

Safeguards Technical Objectives for Thorium Molten Salt Reactor Fuel Cycles

China, Denmark, France, India, Indonesia, the United Kingdom, and the United States, among others, are exploring commercial thorium fuel cycles for domestic power production and/or international export. For any thorium fuel cycle facilities built and/or operated in a non-nuclear weapon State with a comprehensive safeguards agreement, those facilities and any associated nuclear material would be subject to international nuclear safeguards by the International Atomic Energy Agency (IAEA). Thorium fuel cycle facilities offered for the application of safeguards under a voluntary offer agreement by a nuclear weapon State would also be subject to safeguards, if selected by the IAEA. Compared to uranium/plutonium fuel cycle facilities, thorium fuel cycle facilities are comparatively diverse from an inspection and accounting perspective, differing greatly in material type, form, and design from uranium/plutonium fuel cycle facilities and also from each other. Of these, the most complex thorium fuel cycles – and therefore likely the most challenging to the implementation of international nuclear safeguards – are those that include thorium molten salt reactors. With thorium fuel cycles approaching near-term commercial deployment timelines, it is imperative that the international nuclear safeguards community begins to think about how to adapt existing international nuclear safeguards concepts and approaches to thorium fuel cycles, as well as mitigate any gaps that may exist. This paper focuses on the development of recommended safeguards technical objectives for efficient and effective application of international nuclear safeguards measures (e.g., containment / surveillance, non-destructive assay, destructive assay, environmental sampling) to thorium molten salt reactors.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2022

Production of graphene-structured products from coal using thermal molten salt process

The invention provides a method for the production of graphene-structured products. The method generally comprises contacting at a conversion temperature ranging from about 850° C. to about 1100° C. in an inert atmosphere coal with a molten salt to produce a graphene-structured product. In an alternate embodiment, the method comprises contacting at a conversion temperature ranging from about 850° C. to about 1100° C. in an inert atmosphere coal with a molten salt to produce a graphene-structured product; and, separating a rare earth element from the graphene-structured product.

Shi, Fan↗
DOE OSTI2023

Actinide and rare earth drawdown system for molten salt recycle

A method for recycling molten salt from electrorefining processes, the method having the steps of collecting actinide metal using a first plurality of cathodes from an electrolyte bath, collecting rare earths metal using a second plurality of cathodes from the electrolyte bath, inserting the collected actinide metal and uranium into the bath, and chlorinating the inserted actinide metal and uranium. Also provided is a system for recycling molten salt, the system having a vessel adapted to receive and heat electrolyte salt, a first plurality of cathodes adapted to be removably inserted into the vessel, a second plurality of cathodes adapted to be removably inserted into the vessel, an anode positioned within the vessel so as to be coaxially aligned with the vessel, and a vehicle for inserting uranium into the salt.

Willit, James L.↗
DOE OSTI2023

Traveling Molten Zone Refining Process Development for Innovative Fuel Cycle Solutions

Considering the phase diagrams of metallic spent fuel constituents, the melting and solidifying of spent metallic fuel causes three immiscible layers (actinide-rich, lanthanide-rich, and Group II-rich) and the condensate phase (Group I) to form. We believe this anticipated immiscibility offers an untapped opportunity for innovative fuel cycle solutions. Through the proposed project, we anticipate confirming the expected phase behavior and develop a thermal treatment process to rapidly extract actinides from spent metallic fuels. The prime apparatus for both purposes is a traveling molten zone system with induction heating. We envision that one rapid pass of the molten zone from the bottom to the top of the metallic rod incorporating species of spent metallic fuels should produce the expected immiscible layer formation and provide species partitioning data effectively and cleanly. It will also demonstrate an actinide extraction process by concentrating the impurities at the top segment of the rod and leaving the actinide species behind as the bulk rod. The successful execution of the project will demonstrate proof of concept for a transformative process path for used metal fuels in terms of economics and safeguards.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Coupling coarse mesh CFD with fine mesh CFD for modeling for Molten Salt Reactors in the Virtual Test Bed VTB

The Nuclear Energy Advanced Modeling and Simulation (NEAMS) program aims at developing a simulation tool kit to accelerate the development and deployment of nuclear power technologies. NEAMS multiphysics tools have been designed to provide numerical simulation support for the design and licensing of GEN IV reactors. Pronghorn is NEAMS’s coarse-mesh computational fluid dynamics (CFD) tool, which is designed to run 3D core transients in GEN IV reactors at a reduced computational cost. To increase their accuracy, coarse-mesh CFD simulations require calibrated closure coefficients. One way of computing these coefficients is via the Nek5000, NEAMS’s high-fidelity CFD tool. This article discusses our current research lines in informing Pronghorn closure coefficients via Nek5000 to enable multiphysics simulations of the core cavity of the molten-salt fast reactor. We present an application in which Pronghorn mixing length turbulent viscosity has been calibrated from Nek5000 simulations. The resulting Pronghorn thermal-hydraulics model is then coupled to Griffin, the NEAMS neutron transport solver, to solve for the steady-state configuration of the molten-salt fast reactor.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2024

Online Molten Salt and Gas Monitoring Using Combined Spectroscopic Methods

The nonproliferation of nuclear material and the development of safeguards technologies to sample and analyze fuel salt is a challenge for molten salt reactor (MSR) developers. We seek online monitoring using combined spectroscopic methods of two distinct material phases from MSR’s. Molten salt transformed to aerosol phase allows for Light Induced Breakdown spectroscopy (LIBS) without adverse splashing (ARPA-E). Vaporized used nuclear fuel through chlorine-based volatility (CBV) allows for uranium separation based on boiling point differences

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗
DOE OSTI2026

Impact of Molten Gallium on the Microstructure and Corrosion Behavior of Aluminum and Uranium-Aluminum Alloys for Used Nuclear Fuel Reprocessing

Test reactors around the world utilize highly enriched uranium fuel to achieve high neutron fluxes for materials testing. Once spent, the remaining uranium is a valuable resource for subsequent fuel fabrication. However, some of these test reactor cores consist of curved plate-type fuel elements, fabricated using aluminum alloy 6061 (AA6061) cladding to encapsulate a uranium-aluminum alloy (UAlx) fuel matrix. These assemblies require non-standard reprocessing approaches for uranium recovery, as aluminum dissolves readily in acidic solutions, generating large volumes of waste and complicating downstream chemical separations. In this work, we investigate a novel chemical decladding strategy based on the interaction between AA6061/UAlx and molten gallium (Ga). Ga is known to induce severe degradation of aluminum metal through liquid metal embrittlement (LME), even at relatively low Ga concentrations. By penetrating the aluminum crystal lattice, Ga disrupts grain cohesion and facilitates fracture or dissolution of the aluminum matrix. Thermodynamic analysis of the Al–Ga binary phase diagram suggests that Ga may offer a viable pathway to selectively weaken or dissolve the AA6061 cladding, and potentially the aluminum component of the UAlx fuel matrix within. To this end, parametric experiments were performed at 50 °C and 100 °C across a range of Al–Ga atomic fractions. At lower Al fractions, the AA6061 was completely molten after 2 hours of exposure to the Ga metal. In contrast, samples with higher Al fractions (0.9 Al, 0.1 Ga) contained residual solids after 2 hours, which were characterized by microstructural examination using electron backscatter diffraction (EBSD) and transmission electron microscopy (TEM). These Al-Ga compositions were also evaluated using FactSage thermodynamic modeling to further elucidate the relationship between phase diagram behavior and LME.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2025

Corrosion susceptibility and chromium loss in Austenitic steels and Nickel-based alloys in molten FLiNaK at 700 °C

A comparative study was conducted to evaluate the corrosion susceptibility of 316L, 316H, Ni 200, Inconel 625, and Hastelloy N in molten FLiNaK at 700 °C for 100 h. Top-view and cross-sectional scanning electron microscopy (SEM) imaging, combined with energy-dispersive X-ray spectroscopy (EDS) mapping, was performed to investigate microstructural and compositional changes. SEM images were further processed by introducing a contrast threshold to map cavity distribution. Using EDS mapping, intergranular and intragranular Cr loss were separately characterized. The ranking of mass loss after corrosion, from highest to lowest, is as follows: 316H > 316L > Inconel 625 > Hastelloy N > Ni 200. Cr loss was found to be correlated with Mo concentration, in agreement with many previous studies, with higher Mo content resulting in reduced Cr loss. On the other hand, there is no evidence that the high carbon content in 316H enhances corrosion resistance. The relatively low solubility of carbon in austenite at the testing temperature limits the amount of dissolved carbon. Therefore, the carbon-retarded vacancy diffusion, and consequently the reduced Cr diffusion, were not observed.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2025

Path Toward a Breeding, Proliferation-Resistant, Thermal-Spectrum Molten Salt Reactor

Liquid-fueled, thermal-spectrum molten salt breeder reactors (TS-MSBRs) offer the potential for affordable, safe, inexhaustible energy with minimal potential for nuclear material misuse and without significant actinide waste generation. Realizing the full set of TS-MSBR capabilities is only now becoming possible with the advent of advanced fuel-salt processing techniques, improved materials, and a more detailed understanding of fuel-salt properties. Additionally, modern higher-fidelity modeling and simulation methods enable a more detailed evaluation of TS-MSBR design options. TS-MSBRs, however, remain immature and will require substantial, sustained development resources.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2022

Monitoring Noble Gases (Xe and Kr) and Aerosols (Cs and Rb) in a Molten Salt Reactor Surrogate Off-Gas Stream Using Laser-Induced Breakdown Spectroscopy (LIBS)

In this study with surrogate materials we show that laser-induced breakdown spectroscopy (LIBS) is a robust tool with promising capability toward monitoring gaseous (Xe and Kr) and aerosol (Cs and Rb) species in an off-gas stream from a molten salt reactor (MSR). MSRs will continually evolve fission products into the cover gas flowing across the reactor headspace. The cover gas entrains Xe and Kr gases, along with aerosol particles, before passing into an off-gas treatment system. Univariate models of Xe and Kr peaks showed a strong correlation to concentration indicated by their coefficients of determination of 0.983 and 0.997, respectively. Multivariate models were built for all four analytes using partial least squares regression coupled with preprocessing steps including normalization, trimming, and/or genetic algorithm derived filters. The models were evaluated by predicting the concentrations of the analytes in four validation samples, in which all calibration models were successfully validated at a confidence interval of 99.9%. Finally, pressure controllers were used to regulate the mass flow rate of Kr flowing into the measurement cell in sinusoidal and stepwise waveforms to test the real-time monitoring capabilities of the regression models. Both univariate and partial least squares Kr models were able to successfully quantify the gas concentration in the real-time evaluation. The root mean squared error of prediction (RMSEP) values for these real-time tests were calculated to be 0.051, 0.060, and 0.121 mol% demonstrating the measurement systems’ capability to perform online monitoring with acceptable accuracy.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2023

Concept for an irradiation experiment to test a laser-induced breakdown spectroscopy off-gas sensor for molten salt systems

This paper focuses on laser-induced breakdown spectroscopy (LIBS) as an off-gas sensor and details a conceptual irradiation experiment to evaluate its performance in an environment that is more realistic of an operational molten salt reactor (MSR). MSRs are a promising advanced nuclear design that use high-temperature liquid salts as the coolant, fuel, or a combination of both. They will generate and subsequently evolve fission products into the reactor headspace during operation. These evolved fission products will necessitate an online off-gas system to treat the reactor cover gas before recycling it to the core. Such a system, especially during the early deployment phase, will benefit from online sensors to inform operators of the treatment system’s performance. Optical spectroscopy is well-suited to fit this task as it can be remotely deployed using fiber-optics and can detect most species at high frequencies. LIBS can detect nearly every element on the Periodic Table, stable or radioactive, making it an ideal candidate. The provided conceptual experiment discusses the facility requirements, salt capsule design, and detailed testing campaigns with corresponding simulated LIBS spectra.

47 OTHER INSTRUMENTATION↗