Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Mixture separation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29
All sourcesNASA NTRSDOE OSTI
NASA NTRS1986

Theoretical and experimental separation dynamics in capillary zone electrophoresis

The mathematical model of Bier et al. (1983) is used in a computer aided analysis of the conditions in capillary zone electrophoresis (ZE) under which sample zones migrate noninteractively with the carrier electrolyte. The monitoring of sample zones with a capillary analyzer that features both on-line conductivity and UV detection at the end of the separation trough is discussed. Data from a ZE analysis of a 5-component mixture are presented, and it is noted that all five components can be monitored via their conductivity change if enough sample is present. It is suggested from the results that the concentration ratio of background buffer to sample should be a minimum of 100:1 to effectively apply the plate concept to ZE.

Thormann, Wolfgang↗
NASA NTRS1994

Surfactant-based critical phenomena in microgravity

The objective of this research project is to characterize by experiment and theoretically both the kinetics of phase separation and the metastable structures produced during phase separation in a microgravity environment. The particular systems we are currently studying are mixtures of water, nonionic surfactants, and compressible supercritical fluids at temperatures and pressures where the coexisting liquid phases have equal densities (isopycnic phases). In this report, we describe experiments to locate equilibrium isopycnic phases and to determine the 'local' phase behavior and critical phenomena at nearby conditions of temperature, pressure, and composition. In addition, we report the results of preliminary small angle neutron scattering (SANS) experiments to characterize microstructures that exist in these mixtures at different fluid densities.

Kaler, Eric W.↗
NASA NTRS2020

Tensile Creep Behavior of SiC(f)/SiC Ceramic Matrix Minicomposites

Single fiber-tow minicomposites represent the major load-bearing element of woven and laminate ceramic matrix composites (CMCs). To understand the effects of fiber type, fiber content, and matrix cracking on tensile creep in SiCf/SiC CMCs, single-tow SiCf/SiC minicomposites with different fiber types and contents were investigated. The minicomposites studied contained either Hi-Nicalon™ or Hi-Nicalon™ Type S SiC fibers with a boron nitride (BN) interphase and a chemical-vapor-infiltrated-silicon-carbide (CVI-SiC) matrix. Tensile creep was performed at 1200 °C in air. A bottom-up creep modeling approach was applied where creep parameters of the fibers and matrix were obtained separately at 1200 °C. Next, a theoretical model based on the rule of mixtures was derived to model the fiber and matrix creep-time-dependent stress redistribution. Fiber and matrix creep parameters, load transfer model results, and numerical modeling were used to construct a creep strain model to predict creep damage evolution of minicomposites with different fiber types and contents.

SiC/SiC Minicomposites Creep↗
DOE OSTI2024

Succinonitrile-Lithium Salt Complexes as Solid Catholytes for LLZO-Based Solid-State Batteries

The thermal and electrochemical properties of several succinonitrile (SN)-based organic ionic plastic crystals (OIPCs) containing lithium bis(trifluoromethanesulfonyl)imide (LiTFSI), lithium bis(oxalate) borate (LiBOB) or mixtures of the two salts, were investigated with the goal of determining which is most promising for use as a catholyte in solid-state lithium batteries. The best combination of properties for this use was found for the mixture containing 3 mol% LiTFSI and 2 mol% LiBOB in SN. Based on these observations, several solid-state cells containing Al-substituted Li 7 La 3 Zr 2 O 12 separators with composite cathodes consisting of LiNi 0.33 Mn 0.33 Co 0.33 O 2 (NMC111), carbon black, and the succinonitrile-salt mixtures were assembled and cycled at room temperature, without exogenous pressure, using a simple design.

25 ENERGY STORAGE↗
DOE OSTI2021

Fine-tuned thermally cross-linkable 6FDA-based polyimide membranes for aggressive natural gas separation

Glassy 6FDA-based polyimides are attractive membrane materials for many industrially important gas separations; however, plasticization in aggressive natural gas often causes significant loss in CO 2 /CH 4 selectivity. In this study, a family of thermally cross-linkable 6FDA-based polyimides containing carboxyl groups were synthesized and cross-linked as dense films via decarboxylation-induced thermal crosslinking. As well as chemical structure, crosslinking temperatures above and below T g are shown to be synergistic tools. Our results demonstrate that structure evolution during the decarboxylation-induced crosslinking process is affected significantly by the 3,5-diaminobenzoic acid (DABA) content in the polymer backbone. Even for a 50/50 CO 2 /CH 4 binary mixture with feed pressure up to 800 psia, decarboxylation-induced crosslinking provides attractive gas separation performance and plasticization resistance. Combined facile structure tunability, crosslinkability and high asymmetric fiber spinnability make the cross-linkable 6FDA-based polyimides a versatile platform for diverse aggressive natural gas feeds encountered in practice. Finally, our study provides insights into material design of thermally cross-linkable polymer membranes for such a broad spectrum of aggressive gas separations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Screening of metal complexes and organic solvents using the COSMOSAC-LANL model to enhance the energy density in a non-aqueous redox flow cell: an insight into the solubility

In this paper, we have proposed a first-principles methodology to screen transition metal complexes against a particular organic solvent and organic solvents against a particular transition metal complex based on their solubility information without the knowledge of heat of fusion and melting temperature. The energy density of a non-aqueous redox flow cell directly depends on the solubility of the redox active species in the non-aqueous medium. Here, we have used the “COSMOSAC-LANL” activity coefficient model which is based on first-principles COSMO calculations where the microscopic information is passed to the macroscopic world via a dielectric continuum solvation model, followed by a post-statistical thermodynamic treatment of the self-consistent properties of the solute particle to calculate the solubility. To model the activity coefficient at infinite dilution for the binary mixtures, a 3-suffix Margules (3sM) function is introduced for the quantitative estimation of the asymmetric interactions and, for the combinatorial term, the Staverman–Guggenheim (SG) form is used. The new activity coefficient model is separately called the “LANL” activity coefficient model. The metal complex and the organic solvent have been treated as a simple binary mixture. The present model has been applied to a set of 14 different organic solvents and 16 different transition metal complexes. Using the new LANL activity coefficient model in combination with the ADF-COSMOSAC-2013 model, we have shown how one can improve the solubility of a transition metal complex in an organic solvent. We applied our model to screen 84 binary mixtures to predict the compatible pair of redox active species and organic solvent to increase the energy density. The solvation mechanism of the transition metal complexes in the organic solvents was obtained using the new model. The results have been compared with the experimental and theoretical results where they are available.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Scalable slot-die coating of phyllosilicate membranes for selective ion separations

Abstract Two-dimensional (2D) materials have recently drawn attention as candidate materials for molecular-scale membrane separations due to their tunable nanoscale interlayer properties. Phyllosilicates, a broad class of naturally abundant 2D clay minerals, offer significant advantages over synthetic 2D materials, including low cost, stability, and environmental compatibility. While these properties make phyllosilicates attractive for industrial-scale nanofiltration applications, phyllosilicate-based membranes have, to date, only been fabricated at the lab scale via vacuum filtration. Scalable fabrication methods are essential to advance the technical maturity of phyllosilicate membranes and bring these promising materials closer to large-scale adoption. Herein, we have successfully scaled up phyllosilicate (vermiculite) membrane fabrication via slot-die coating and roll-to-roll coating of an ethylenediamine–vermiculite (EDAVM) mixture onto nylon. The coated membranes are 1–2 μm $ \unicode{x03BC} \mathrm{m} $ mu m in thickness and exhibit similar structure and performance to vacuum-filtered EDAVM membranes. The membranes also show selectivity for monovalent ions over multivalent ions in binary salt mixtures. This work represents a major step toward scaling up phyllosilicate membranes for industrial ion separation applications such as resource recovery from water.

Booth, Austin [Princeton University]↗
DOE OSTI2020

Characterization of the ALSEP Process at Equilibrium: Speciation and Stoichiometry of the Extracted Complex

We have determined the identity of the complexes extracted into the ALSEP process solvent from solutions of nitric acid. The ALSEP process is a new solvent extraction separation designed to separate americium and curium from trivalent lanthanides in irradiated nuclear fuel. ALSEP employs a mixture of two extractants, 2-ethylhexyl phosphonic acid mono-2-ethylhexyl ester (HEH[EHP]) and N,N,N',N'-tetra(2-ethylhexyl)diglycolamide (TEHDGA) in n-dodecane, which makes it difficult to ascertain the nature of the extracted metal complexes. It is often asserted that the weak acid extractant HEH[EHP] does not participate in the extracted complex under ALSEP extraction conditions (2–4 M HNO 3 ). However, the analysis of the Am extraction equilibria, Nd absorption spectra, and Eu fluorescence emission spectra of metal-loaded organic phases argues for the participation of HEH[EHP] in the extracted complex despite the high acidity of the aqueous phases. The extracted complex was determined to contain fully protonated molecules of HEH[EHP] with an overall stoichiometry of M(TEHDGA) 2 (HEH[EHP]) 2 ·3NO 3 . Computations also demonstrate that replacing one TEHDGA molecule with one (HEH[EHP]) 2 dimer is likely energetically favorable compared to Eu(TEHDGA) 3 ·3NO 3 , whether the HEH[EHP] dimer is monodentate or bidentate.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS2014

Kinematic Modeling of Separation Compression for Paired Approaches to Closely-Spaced Parallel Runways

In a simultaneous paired approach to closely-spaced parallel runways, a pair of aircraft flies in close proximity on parallel approach paths. The longitudinal separation between the aircraft must be maintained within a range that avoids wake encounters and, if one of the aircraft blunders, avoids collision. To increase operational availability, the approach procedure must accommodate a mixture of aircraft sizes and, consequently, approach speeds. In these procedures, the slower aircraft is placed in the lead position. The faster aircraft maintains separation from the slow aircraft in a dependent operation until final approach and flies independently afterward. Due to the higher approach speed of the fast aircraft, longitudinal separation will decrease during final approach. Therefore, the fast aircraft must position itself before the final approach so that it will remain within the safe range of separation as separation decreases. Given the approach geometry and speed schedule for each aircraft, one can use kinematics to estimate the separation loss between a pair of aircraft. A kinematic model can complement fast-time Monte-Carlo simulations of the approach by enabling a tailored reduction in the variation of starting position for the fast aircraft. One could also implement the kinematic model in ground-based or on-board decision support tools to compute the optimal initial separation for a given pair of aircraft. To better match the auto-coupled flight of real aircraft, the paper derives a kinematic model where the speed schedule is flown using equivalent airspeed. The predicted time of flight using the equivalent airspeed kinematic model compares well against a high-fidelity aircraft simulation performing the same approach. This model also demonstrates a modest increase in the predicted loss of separation when contrasted against a kinematic model that assumes the scheduled speed is true airspeed.

Madden, Michael M.↗
NASA NTRS2018

Solid State Ultracapacitor

An ink of the formula: 60-80% by weight BaTiO3 particles coated with SiO2; 5-50% by weight high dielectric constant glass; 0.1-5% by weight surfactant; 5-25% by weight solvent; and 5-25% weight organic vehicle. Also a method of manufacturing a capacitor comprising the steps of: heating particles of BaTiO3 for a special heating cycle, under a mixture of 70-96% by volume N2 and 4-30% by volume H2 gas; depositing a film of SiO2 over the particles; mechanically separating the particles; incorporating them into the above described ink formulation; depositing the ink on a substrate; and heating at 850-900 C for less than 5 minutes and allowing the ink and substrate to cool to ambient in N2 atmosphere. Also a dielectric made by: heating particles of BaTiO3 for a special heating cycle, under a mixture of 70-96% by volume N2 and 4-30% by volume H2 gas; depositing a film of SiO2 over the particles; mechanically separating the particles; forming them into a layer; and heating at 850-900 C for less than 5 minutes and allowing the layer to cool to ambient in N2 atmosphere.

Rolin, Terry D.↗
NASA NTRS2014

Optical Constants of Mars Candidate Materials used to Model Laboratory Reflectance Spectra of Mixtures

Data obtained at visible and nearinfrared wavelengths by OMEGA on MarsExpress and CRISM on MRO provide definitive evidence for the presence of phyllosilicates and other hydrated phases on Mars. A diverse range of both Fe/Mg-OH and Al- OH-bearing phyllosilicates were identified including the smectites nontronite, saponite, and montmorillonite. To constrain the abundances of these phyllosilicates, spectral analyses of mixtures are needed. We report on our effort to enable the quantitative evaluation of the abundance of hydrated-hydroxylated silicates when they are contained in mixtures. Here we focus on two component mixtures of the hydrated/ hydroxylated silicates, saponite and montmorillonite (Mg- and Al-rich smectites) with each other and with two analogs for other Martian materials; pyroxene (enstatite) and palagonitic soil (an alteration product of basaltic glass, hereafter referred to as palagonite). We prepared three size separates of each end-member for study: 20-45, 63-90, and 125-150 micron. Here we focus upon mixtures of the 63-90 m size fractions.

MarsExpress and CRISM↗
DOE OSTI2025

Selective concentration of multivalent cations via electrodialysis through tandem membranes

Selective electrodialysis is attractive for recovering and recycling valuable ions. However, most studies in this field focus on membranes that are selective for monovalent ions. Multivalent cations preferentially partition into cation-exchange membranes, but low mobilities and concentration polarization limit electrodialysis selectivities for these cations. This work employs electrodialysis through an “in-series” combination of a Nafion membrane and a multilayer polyelectrolyte film (MPF)-coated Nafion membrane to concentrate and isolate La 3+ or Mg 2+ from monovalent ions. The bare Nafion membrane gives a La 3+ /Na + selectivity up to 4 (depending on conditions), which enables concentration of La 3+ with a high current efficiency. The MPF-coated membrane allows selective passage of Na + while rejecting La 3+ to increase the purity of the concentrated multivalent cation. For example, the concentration of La 3+ in the accumulation solution can reach 9 times its original concentration in the feed solution with a purity of 93 mol% (99 wt%) when starting with equimolar mixtures of NaNO 3 and La(NO 3 ) 3 . This study examines how the separation varies with the type of polyelectrolyte, the applied voltage, and the composition of feed, accumulation, and cathode solutions. Here, a high nitric acid concentration (0.5 M) in the cathode compartment allows monovalent anions to pass through the MPF-coated Nafion membrane to maintain the electroneutrality of the accumulation solution. With a low acid concentration (0.04 M) in the cathode chamber, water splitting occurs at the MPF-coated membrane and La(OH) 3 precipitates.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Supramolecular Assembly of One-Dimensional Coordination Polymers for Efficient Separation of Xenon and Krypton

Efficient separation and purification of xenon (Xe) from krypton (Kr) represent an industrially crucial but challenging process. While the adsorption-based separation of these atomic gases represents an energy-efficient process, achieving highly selective adsorbents remains a difficult task. Here, we demonstrate a supramolecular assembly of coordination polymers, termed as M(II)-dhbq (M = Mg, Mn, Co, and Zn; dhbq = 2,5-dihydroxy-1,4-benzoquinone), with high-density open metal sites (5.3 nm –3 ) and optimal pore size (5.5 Å), which are able to selectively capture Xe among other chemically inert gases including Kr, Ar, N 2 , and O 2 . Among M(II)-dhbq materials, Mn-dhbq exhibits the highest Xe uptake capacity of 3.1 mmol/g and a Xe/Kr selectivity of 11.2 at 298 K and 1.0 bar, outperforming many state-of-the-art adsorbents reported so far. Remarkably, the adsorption selectivity of Mn-dhbq for Xe/O 2 , Xe/N 2 , and Xe/Ar at ambient conditions reaches as high as 70.0, 139.3, and 64.0, respectively. Direct breakthrough experiments further confirm that all M(II)-dhbq materials can efficiently discriminate Xe atoms from other inert gases. Furthermore, it is revealed from the density functional theory calculations that the strong affinity between Xe and the coordination polymer is mainly attributed to the polarization by open metal sites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Increased CO 2 /N 2 selectivity of PTMSP by surface crosslinking

The surface crosslinking of poly[1-(trimethylsilyl)-1-propyne] (PTMSP) membranes by dithiothreitol under thiol–ene click reaction conditions has yielded membranes having CO 2 /N 2 selectivities in excess of 30 with CO 2 permeances in excess of 300 GPU (gas permeation units). Here, the simplicity of this surface crosslinking strategy together with these permeation results suggests that PTMSP that is modified in such ways could lead to useful materials for the separation of CO 2 /N 2 from flue gas and for certain other gaseous mixtures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

All-purpose, all-sky photometric redshifts for the Legacy Imaging Surveys Data Release 8

ABSTRACT In this paper, we present photometric redshift (photo-z) estimates for the Dark Energy Spectroscopic Instrument (DESI) Legacy Imaging Surveys, currently the most sensitive optical survey covering the majority of the extragalactic sky. Our photo-z methodology is based on a machine-learning approach, using sparse Gaussian processes augmented with Gaussian mixture models (GMMs) that allow regions of parameter space to be identified and trained separately in a purely data-driven way. The same GMMs are also used to calculate cost-sensitive learning weights that mitigate biases in the spectroscopic training sample. By design, this approach aims to produce reliable and unbiased predictions for all parts of the parameter space present in wide area surveys. Compared to previous literature estimates using the same underlying photometry, our photo-zs are significantly less biased and more accurate at z > 1, with negligible loss in precision or reliability for resolved galaxies at z < 1. Our photo-z estimates offer accurate predictions for rare high-value populations within the parent sample, including optically selected quasars at the highest redshifts (z > 6), as well as X-ray or radio continuum selected populations across a broad range of flux (densities) and redshift. Deriving photo-z estimates for the full Legacy Imaging Surveys Data Release 8, the catalogues provided in this work offer photo-z estimates predicted to be of high quality for ≳9 × 108 galaxies over ${\sim}19\, 400\, \text{deg}^{2}$ and spanning 0 < z ≲ 7, offering one of the most extensive samples of redshift estimates ever produced.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1979

Formulated plastic separators for soluble electrode cells

The fabrication and milling of membranes comprising a hydrochloric acid-insoluble sheet of a mixture of a rubber and a powdered ion transport material are described. The sheet can be present as a coating upon a flexible and porous substrate. These membranes can be used in oxidation-reduction electrical accumulator cells wherein the reduction of one member of a couple is accompanied by the by the oxidation of the other member of the couple on the other side of the cell and this must be accompanied by a change in chloride ion concentration in both sides.

Sheibley, D. W.↗
NASA NTRS1979

High performance N2O4/amine elements blowapart

Hypergolic earth-storable N2O4/Amine propellants are used for a wide range of liquid propulsion system applications. These propellants are highly reactive and can experience reactive stream separation (RSS, i.e., blowapart) which can inhibit intraelement mixing, hence reducing the overall spray mixture ratio and mass distribution, which can result in altered combustion efficiency, gas-side heat transfer coefficient, and stability. An experimental and analytical program was conducted to develop an understanding of the mechanisms controlling RSS. The program and product was development of design criteria for coping with RSS to allow the design of high performing, stable injectors. RSS mechanisms were identified using high speed color photography to observe reactive stream mixing of single element injectors tested with N2O4/MMH, N2O4/A-50, and N2O4/N2H4 propellants. The parametric characterization included modeling of the Space Shuttle Orbital Maneuvering System and Reaction Control System engine injectors.

Source record↗