SEARCH · Engineering Papers

Results for “Microwave”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29

All sources NASA NTRS DOE OSTI

NASA NTRS1990

Connecting forest ecosystem and microwave backscatter models

A procedure is outlined to connect data obtained from active microwave remote sensing systems with forest ecosystem models. The hierarchy of forest ecosystem models is discussed, and the levels at which microwave remote sensing data can be used as inputs are identified. In addition, techniques to utilize forest ecosystem models to assist in the validation of theoretical microwave backscatter models are identified. Several examples to illustrate these connecting processes are presented.

Kasischke, Eric S.↗

NASA NTRS1990

Determination of surface resistance and magnetic penetration depth of superconducting YBa2Cu3O(7-delta) thin films by microwave power transmission measurements

A novel waveguide power transmission measurement technique was developed to extract the complex conductivity of superconducting thin films at microwave frequencies. The microwave conductivity was taken of two laser ablated YBa2Cu3O(7-delta) thin films on LaAlO3 with transition temperatures of approx. 86.3 and 82 K, respectively, in the temperature range 25 to 300 K. From the conductivity values, the penetration depth was found to be approx. 0.54 and 0.43 micron, and the surface resistance (R sub s) to be approx. 24 and 36 micro-Ohms at 36 GHz and 76 K for the two films under consideration. The R sub s values were compared with those obtained from the change in the Q-factor of a 36 GHz Te sub 011-mode (OFHC) copper cavity by replacing one of its end walls with the superconducting sample. This technique allows noninvasive characterization of high transition temperature superconducting thin films at microwave frequencies.

Bhasin, K. B.↗

NASA NTRS1990

On the feasibility of microwave produced Bragg reflector: Examined by the chamber experiment

A set of parallel plasma layers is generated by two intersecting microwave pulses in a chamber containing dry air at a pressure comparable to the upper atmosphere. The dependencies of breakdown conditions on the pressure and pulse length are examined. The results are shown to be consistent with the appearance of tail erosion of microwave pulse caused by air breakdown. A Bragg scattering experiment using the plasma layers as a Bragg reflector is then performed. Both time domain and frequency domain measurements of wave scattering are conducted. The results are found to agree very well with the theory. Moreover, the time domain measurement of wave scattering provides an unambiguous way for determining the temporal evolution of electron density during the first 100 microsec period. A Langmuir double probe is also used to determine the decay rate of electron density during a later time interval (1 to 1.1 ms). The propagation of high power microwave pulses through the air is also studied experimentally. The mechanism responsible for two different degrees of tail erosion were identified. The optimum amplitude of a 1.1 microsec pulse for maximum energy transfer through the air was determined.

Kuo, S. P.↗

NASA NTRS1990

Containerless synthesis of ceramic materials using microwave heating

It was demonstrated that microwave heating technique may be employed for the synthesis of a number of multicomponent ceramic oxide-based materials, e.g., YBa2Cu3O7 and CuFe2O4. A characteristic, and potentially extremely useful, feature of such synthesis is that they occur in significantly less time than that required using conventional furnace-based techniques. However, the information obtained to date is necessarily rather empirical, and systematic investigations of the use of microwave heating for the synthesis of ceramic materials are required. The synthesis of ceramic materials at high temperatures are often affected by unwanted, deleterious reactions of the reactants and/or products with the reaction container. Consequently, it is of interest to investigate the high temperature synthesis of ceramic materials using microwave heating in a containerless environment.

Dunn, B.↗

NASA NTRS1990

A comparison of microwave versus direct solar heating for lunar brick production

Two processing techniques considered suitable for producing bricks from lunar regolith are examined: direct solar heating and microwave heating. An analysis was performed to compare the two processes in terms of the amount of power and time required to fabricate bricks of various sizes. Microwave heating was shown to be significantly faster than solar heating for rapid production of realistic-size bricks. However, the relative simplicity of the solar collector(s) used for the solar furnace compared to the equipment necessary for microwave generation may present an economic tradeoff.

Yankee, S. J.↗

NASA NTRS1990

Long-term microwave power drift of a cesium frequency standard and its effect on output frequency

It has been shown that the long-term frequency stability of a cesium (Cs) frequency standard is affected by variations in the standard's internal microwave power source. Studies were performed on a commercial Cs frequency standard for a period of 20 days, to determine the stability of its microwave power source. The results were then analyzed statistically, and the effects of microwave power drift on the standard's frequency stability were calculated.

Johnson, W. A.↗

NASA NTRS1991

DSS 13 phase 2 pedestal room microwave layout

The design and predicted performance is described of the microwave layout for three band operation of the beam waveguide antenna Deep Space Station 13. Three pedestal room microwave candidate layout designs were produced for simultaneous X/S and X/Ka band operation. One of the three designs was chosen based on given constraints, and for this design the microwave performance was estimated.

Cwik, T.↗

NASA NTRS1989

Attenuation of soil microwave emissivity by corn and soybeans at 1.4 and 5 GHz

Theory and experiments have shown that passive microwave radiometers can be used to measure soil moisture. However, the presence of a vegetative cover alters the measurement that might be obtained under bare conditions. Deterministically accounting for the effect of vegetation and developing algorithms for extracting soil moisture from observations of a vegetable-soil complex present significant obstacles to the practical use of this approach. The presence of a vegetation canopy reduces the sensitivity of passive microwave instruments to soil moisture variations. The reduction in sensitivity, as compared to a bare-soil relationship, increases as microwave frequency increases, implying that the longest wavelength sensors should provide the most information. Sensitivity also decreases as the amount of vegetative wet biomass increases for a given type of vegetation.

Jackson, Thomas J.↗

NASA NTRS1989

Basic properties of developed wind waves and their influence on microwave remote sensing signatures

Error trends in wind speed measurements by satellite scatterometer altimeter and microwave radiometer are shown to be correlated with the degree of wave development. These errors are analyzed theoretically by studying the rms wave slope which, directly or indirectly, affects all microwave signatures. For equilibrium sea state, the influence of spectrum parameters on the wave slope is reviewed. In well-developed seas, the dominant wavelength is shown to have no effect on the slope. Temporal-spatial rates of steep and breaking waves are derived and compared with field observations. The inner scale that determines a rapid falloff of spectral density function at high frequencies is estimated. The dependence of the spectral parameters on wind speed and sea maturity is studied using NOAA buoy observations. It is concluded that the removal of environmental error trends from satellite measurements can be best accomplished by a joint processing of microwave returns from several independent instruments.

Glazman, Roman E.↗

NASA NTRS1990

Global atmospheric temperature monitoring with satellite microwave measurements - Method and results 1979-84

This paper describes a method for determining global atmospheric-temperature anomalies by means of satellite microwave radiometry. It is shown that microwave measurements of molecular oxygen thermal emission by the Microwave Sounding Units (MSUs) flying aboard the NOAA-6 and NOAA-7 can be used to monitor tropospheric temperature anomalies on global basis to a high level of precision. Comparisons between monthly MSU-derived hemispheric temperature anomalies with those computed from surface thermometer data show a very good agreement over the United States, although not for the hemispheres, especially the Southern Hemisphere. In this latter case, the poor agreement is ascribed to weaker thermal coupling between the ocean and the deep troposphere than that over the U.S. Annual anomalies for the hemispheres exhibit better correlations than do monthly anomalies.

Spencer, Roy W.↗

NASA NTRS1990

Estimation of area-averaged rainfall over tropical oceans from microwave radiometry - A single channel approach

This paper presents a new simple retrieval algorithm for estimating area-time averaged rain rates over tropical oceans by using single channel microwave measurements from satellites. The algorithm was tested by using the Nimbus-5 Electrically Scanning Microwave Radiometer and a simple microwave radiative transfer model to retrieve seasonal 5-deg x 5-deg area averaged rainrate over the tropical Atlantic and Pacific from December 1973 to November 1974. The brightness temperatures were collected and analyzed into histograms for each season and in each grid box from December 1973 to November 1974. The histograms suggest a normal distribution of background noise plus a skewed rain distribution at the higher brightness temperatures. By using a statistical estimation procedure based upon normally distributed background noise, the rain distribution was separated from the raw histogram. The radiative transfer model was applied to the rain-only distribution to retrieve area-time averaged rainrates throughout the tropics. Despite limitations of single channel information, the retrieved seasonal rain rates agree well in the open ocean with expectations based upon previous estimates of tropical rainfall over the oceans.

Shin, Kyung-Sup↗

NASA NTRS1991

A comparison of microwave techniques for measuring rainfall

The purpose of this paper is to evaluate within a common framework a large number of techniques for nearly instantaneous microwave measurements of rainfall and to determine the range of rainfall rates best suited to the various techniques and estimators. The physical basis of a technique as transformed by measurement imperfections of real instruments determines the ultimate performance capability of any microwave rain estimator. While many of the defects of the measurement process apply to all techniques, the physics behind each estimator differs. A method is presented for objectively evaluating the physical bases of the techniques and for quantifying estimator performance for perfect instruments. These results are then tempered by standard measurement errors to yield more realistic results. Analysis demonstrates that, in general, the minimization of rainfall estimate errors over a wide range of rainfall rates requires the simultaneous application of more than one microwave rainfall measurement technique.

Jameson, A. R.↗

NASA NTRS1990

Optical control of microwave devices

Theoretical and applications aspects of optoelectronic control for microwave devices are examined in an introduction for graduate engineering students and practicing engineers. The basic features of optical MMICs are reviewed, and chapters are devoted to laser diodes, electrooptic modulators, photodetectors, microwave fiber-optic links, optoelectronic switching and gating, optoelectronic microwave signal generation, an optoelectronic switch matrix, optoelectronic switching and modulation of oscillators, and optoelectronic injection-locking and tuning of oscillators. Extensive diagrams, drawings, and graphs are provided.

Simons, Rainee↗

NASA NTRS1991

Determination of surface resistance and magnetic penetration depth of superconducting YBa2Cu3O(7-delta) thin films by microwave power transmission measurements

A novel waveguide power transmission measurement technique was developed to extract the complex conductivity of superconducting thin films at microwave frequencies. The microwave conductivity was taken of two laser ablated YBa2Cu3O(7-delta) thin films on LaAlO3 with transition temperatures of approximately 86.3 and 82 K, respectively, in the temperature range 25 to 300 K. From the conductivity values, the penetration depth was found to be approximately 0.54 and 0.43 micron, and the surface resistance (R sub s) to be approximately 24 and 36 micro-Ohms at 36 GHz and 76 K for the two films under consideration. The R sub s values were compared with those obtained from the change in the Q-factor of a 36 GHz Te sub 011-mode (OFHC) copper cavity by replacing one of its end walls with the superconducting sample. This technique allows noninvasive characterization of high transition superconducting thin films at microwave frequencies.

Bhasin, K. B.↗

NASA NTRS1991

Synergic inversion technique for active and passive microwave remote sensing of the ocean

A unified approach for combining active and passive microwave measurements for remote sensing applications is described. A synergic inversion technique has been developed and applied to the retrieval of geophysical parameters of the ocean surface and of the atmosphere. It is based on the combination of radiometric and radar measurements at the electromagnetic and cell level and not only on the correction of radar measurements by radiometric measurements, or conversely. Such a combination is performed through a common quantity: the bistatic scattering coefficient of the observed surface. This is used in a direct model to simulate combined measurements from active and passive sensors. It requires a rather complete and accurate calculation of the scattering of microwaves by the rough sea surface. Comparisons with experimental models derived for scatterometers and radar altimeters or with data derived from radiometric measurements show that the results of this unified approach are consistent with those from separate microwave sensors, at least for a foam-free sea surface.

Sobieski, Piotr↗

NASA NTRS1991

Microwave simulations of a tropical rainfall system with a three-dimensional cloud model

A three-dinensional cloud model-microwave radiative transfer model combination is used to study the relations among the precipitation and other microphysical characteristics of a tropical oceanic squall line and the upwelling radiance at pertinent microwave frequencies. Complex brightness temperature-rain rate relations are evident at the full horizontal resolution (1.5 km) of the models, with spatial averaging producing smoother, shifter relations in most cases. Nonprecipitating cloud water is shown to be important in understanding the resulting distribution of brightness temperature. At the mature stage, convective portions of the cloud system are shown to produce different brightness temperature relations than the stratiform portion, primarily related to the distribution of cloud water. The evolution of the convective system from a small convective complex through its mature stage and the beginning of its dissipation also is shown to result in a variation of brightness temperature-rain relations, related to the distribution of cloud water and the evolution of ice in the precipitating system. The results of the study point to the need to take into account the evolution of nonprecipitating cloud water and precipitation-sized ice in the retrieval of rain from passive microwave space observations. This effect is evident for both the life cycle of individual convective elements and the life cycle of the convective system as a whole.

Adler, Robert A.↗

NASA NTRS1991

Optimal spectral windows for microwave diversity imaging

Tomographic microwave diversity imaging is analyzed using linear system theory concepts, and optimal spectral windows for data acquisition are obtained either by considering window position in the spectral domain or by using simulated annealing to find an optimal phase weighting of the object frequency response samples collected over the specified spectral window. This study provides a means of microwave image formation that is applicable under general assumptions. Results of numerical simulations and representative images reconstructed from realistic experimental microwave scattering data are given, demonstrating that the proposed approach is superior to previous image reconstruction methods.

Farhat, Nabil H.↗

NASA NTRS1990

Superconductivity applications for infrared and microwave devices; Proceedings of the Meeting, Orlando, FL, Apr. 19, 20, 1990

Various papers on superconductivity applications for IR and microwave devices are presented. The individual topics addressed include: pulsed laser deposition of Tl-Ca-Ba-Cu-O films, patterning of high-Tc superconducting thin films on Si substrates, IR spectra and the energy gap in thin film YBa2Cu3O(7-delta), high-temperature superconducting thin film microwave circuits, novel filter implementation utilizing HTS materials, high-temperature superconductor antenna investigations, high-Tc superconducting IR detectors, high-Tc superconducting IR detectors from Y-Ba-Cu-O thin films, Y-Ba-Cu0-O thin films as high-speed IR detectors, fabrication of a high-Tc superconducting bolometer, transition-edge microbolometer, photoresponse of YBa2Cu3O(7-delta) granular and epitaxial superconducting thin films, fast IR response of YBCO thin films, kinetic inductance effects in high-Tc microstrip circuits at microwave frequencies.

Bhasin, Kul B.↗