Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Manufacturing processes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29
All sourcesNASA NTRSDOE OSTI
NASA NTRS1988

Fatigue failure of regenerator screens in a high frequency Stirling engine

Failure of Stirling Space Power Demonstrator Engine (SPDE) regenerator screens was investigated. After several hours of operation the SPDE was shut down for inspection and on removing the regenator screens, debris of unknown origin was discovered along with considerable cracking of the screens in localized areas. Metallurgical analysis of the debris determined it to be cracked-off-deformed pieces of the 41 micron thickness Type 304 stainless steel wire screen. Scanning electron microscopy of the cracked screens revealed failures occurring at wire crossovers and fatigue striations on the fracture surface of the wires. Thus, the screen failure can be characterized as a fatigue failure of the wires. The crossovers were determined to contain 30 percent reduction in wire thickness and a highly worked microstructure occurring from the manufacturing process of the wire screens. Later it was found that reduction in wire thickness occurred because the screen fabricator had subjected it to a light cold-roll process after weaving. Installation of this screen left a clearance in the regenerator allowing the screens to move. The combined effects of the reduction in wire thickness, stress concentration (caused by screen movement), and highly worked microstructure at the wire crossovers led to the fatigue failure of the screens.

Hull, David R.↗
NASA NTRS1986

Assessment of commercially available and experimental hydrogen electrodes

NASA Lewis Research Center is currently involved in advanced cell component development for nickel-hydrogen cells and batteries. Long life, high energy density, improved performance and reliability are required for energy storage systems in future space missions. Commercially available as well as experimental hydrogen electrodes were assessed and compared to the state-of-the-art hydrogen electrode that is currently being used in nickel-hydrogen batteries. These electrodes were evaluated by scanning electron microscopy and standard electrochemical polarization measurements. Production variables such as Teflon content and platinum catalyst loading were considered in order to assess various hydrogen electrodes with regard to the different electrode manufacturing processes.

Charleston, Jo Ann↗
NASA NTRS1987

Flight problem evaluation for Space Shuttle Orbiter

The flight problems experienced with the reusable Space Shuttle Orbiter have decreased during subsequent flights of each vehicle. By comparison to first flights of previous vehicles, the problems encountered on the initial flight of each new vehicle entering the fleet decreased. This improvement in turn has reduced the turnaround time between flights significantly and thus greatly enhanced the increased Space Shuttle launch frequency. The reusable manned space vehicle concept necessitated the development of a flight problem recognition and resolution system which would enable a thorough and timely vehicle turnaround flow. Flight evaluation, testing, and repair of manned spacecraft to enhance reliability and to ensure mission success is a unique activity. Real-time recognition of the flight problem, prompt isolation of the cause, and timely implementation of the corrective action are the keys to maintaining an operational fleet. Examples of flight problems that have been encountered as well as the corrective actions implemented during the first 24 Space Shuttle missions are presented. The corrective actions taken to preclude problem recurrence include modifications of hardware designs, manufacturing processes, flight software, test methods, and operational procedures.

Mechelay, Joseph E.↗
NASA NTRS1988

Redundant manipulators for momentum compensation in a micro-gravity environment

This paper is concerned with the implementation and assessment of joint motion management strategies for kinematically redundant robotic manipulators operating in the micro-gravity environment of Space Station. These robots must be capable of conducting experiments and manufacturing processes without disturbing the micro-gravity environment through base reactions/motions. The redundant degrees of freedom of the manipulator permit the inverse kinematic problem to be solved simultaneously with the minimization of a cost function. The cost function in this case is the weighted sum of the squares of the base forces and moments and is minimized over discrete time segments. The Generalized Inverse Method and Rayleigh Ritz technique are used to solve the combined optimization/inverse kinematics problem. Numerical examples include various robotic configurations and degrees of manipulator redundancy.

Quinn, R. D.↗
NASA NTRS1988

A mathematical theory of learning control for linear discrete multivariable systems

When tracking control systems are used in repetitive operations such as robots in various manufacturing processes, the controller will make the same errors repeatedly. Here consideration is given to learning controllers that look at the tracking errors in each repetition of the process and adjust the control to decrease these errors in the next repetition. A general formalism is developed for learning control of discrete-time (time-varying or time-invariant) linear multivariable systems. Methods of specifying a desired trajectory (such that the trajectory can actually be performed by the discrete system) are discussed, and learning controllers are developed. Stability criteria are obtained which are relatively easy to use to insure convergence of the learning process, and proper gain settings are discussed in light of measurement noise and system uncertainties.

Phan, Minh↗
NASA NTRS1989

Mandrels For Microtextured Small-Vessel Implants

Research shows artificial blood-vessel and heart-valve implants made more compatible with their biological environments by use of regularly microtextured surfaces. In new manufacturing process, ion beam etches patterned array of small pillars on mandrel used to mold tubular plastic implant. Pillars create tiny regularly spaced holes in inner surface of tube. Holes expected to provide sites for attachment of healthy lining. Polytetrafluoroethylene (PTFE) used as mandrel material because it can be etched by ion beam.

Deininger, William D.↗
NASA NTRS1988

Requirements and test results for the qualification of thermal control coatings

Paint type coatings are often used as engineering materials in critical satellite temperature control applications. The functional features of coatings used for temperature control purposes must remain stable throughout the satellite manufacturing process and the satellite mission. The selection of a particular coating depends on matching coating characteristics to mission requirements. The use of paint coatings on satellites, although having an extensive history, requires that the paint be qualified to each application on an individual basis. Thus, the qualification process through testing serves to ensure that paint coatings as engineering materials will fulfill design requirements.

Brzuskiewicz, J. E.↗
NASA NTRS1989

The use of COSMIC NASTRAN in an integrated conceptual design environment

Changes in both software and hardware are rapidly bringing conceptual engineering tools like finite element analysis into mainstream mechanical design. Systems that integrate all phases of the manufacturing process provide the most cost benefits. The application of programming concepts like object oriented programming allow for the encapsulation of intelligent data within the design geometry. This combined with declining cost in per seat hardware bring new alternatives to the user.

White, Gil↗
NASA NTRS1988

Robots for manipulation in a micro-gravity environment

This paper is concerned with the development of control strategies and mechanisms for robots operating in the micro-gravity environment of Space Station. These robots must be capable of conducting experiments and manufacturing processes without disturbing the micro-gravity environment through base reactions/motions. Approaches discussed for controlling the robot base reactions/motions include strategies making use of manipulators with redundant degrees of freedon, actuators at the robot base, and a redundant (balancing) arm. Two degree-of-freedom, traction-drive joints are discussed as well as the conceptual design for a traction-driven manipulator.

Quinn, R. D.↗
NASA NTRS1988

Fabrication of MgF2 and LiF windows for the Hubble Space Telescope Imaging Spectrograph

Two prototype test windows (MgF2 and LiF) to be used on the 75-mm UV MAMA detector tubes for the Hubble Space Telescope Imaging Spectrograph are described. The spatial and optical constraints of this instrument dictate that the thickness of the window materials be no greater than 2-3 mm to achieve a minimum 50-percent transmission at hydrogen Lyman alpha (121.6 nm), and that the window must be domed to minimize optical aberrations and provide structural strength. The detector window has an input diameter of about 100 mm with a radius-of-curvature of 70 mm. The manufacturing processes involved in the fabrication of these windows is discussed, as well as test programs (optical and structural) to be performed at Goddard Space Flight Center.

Gormley, Daphne↗
NASA NTRS1989

Design and testing of thermal-expansion-molded graphite-epoxy hat-stiffened sandwich panels

Minimum weight configurations for two types of graphite-epoxy hat-stiffened compression-loaded panels fabricated by the thermal-expansion-molding (TEM) manufacturing process were evaluated analytically and experimentally for designs with load index Nx/L values ranging from 100 to 800. The two types of panels contain graphite-epoxy face sheets with a foam core and hat stiffeners which are either open or filled with foam. Constraints on the extensional and shear stiffnesses are imposed on the design so that the panels will satisfy typical constraints for aircraft wing structures. Optimal structurally efficient TEM panels are compared to commercially available aluminum aircraft structures. Predicted load-strain relationships agree well with experimental results. Significant impact damage to the unstiffened face sheet and foam core does not noticeably reduce the load carrying ability of the panels, but damage to the stiffened face sheet reduces the failure load by 20 percent compared to unimpacted panels.

Jegley, Dawn C.↗
NASA NTRS1989

Composite laminate free-edge reinforcement with U-shaped caps. I - Stress analysis. II - Theoretical-experimental correlation

The present generalized plane-strain FEM analysis for the prediction of interlaminar normal stress reduction when a U-shaped cap is bonded to the edge of a composite laminate gives attention to the highly variable transverse stresses near the free edge, cap length and thickness, and a gap under the cap due to the manufacturing process. The load-transfer mechanism between cap and laminate is found to be strain-compatibility, rather than shear lag. In the second part of this work, the three-dimensional composite material failure criteria are used in a progressive laminate failure analysis to predict failure loads of laminates with different edge-cap designs; symmetric 11-layer graphite-epoxy laminates with a one-layer cap of kevlar-epoxy are shown to carry 130-140 percent greater loading than uncapped laminates, under static tensile and tension-tension fatigue loading.

Howard, W. E.↗
NASA NTRS1989

New results concerning the use of kinematically redundant manipulators in microgravity environments

This paper is concerned with the development of control strategies for kinematically redundant manipulators to be used in Space Station laboratories. These robots must be able to conduct experiments and manufacturing processes without disturbing the microgravity environment, and thus their dynamic base reactions/motions must be nearly eliminated. Redundant degrees of freedom permit the inverse kinematics problem to be solved in conjuction with the minimization of a cost function defined as a weighted sum of the base reactions. It is shown that the weights in the cost function should be used as an additional set of parameters in the minimization problem. The actual performance of the local optimal trajectory approach is demonstrated to be not as good as was previously reported.

Quinn, R. D.↗
NASA NTRS1989

Computerized inspection of gear tooth surfaces

An approach is proposed that uses coordinate measurements of the real surface of spiral bevel gears to determine the actual machine tool setting applied during the gear manufacturing process. The deviations of the real surface from the theoretical one are also determined. Adjustments are then applied by machine tool corrections to minimize these surface deviations. This is accomplished by representing the real surface analytically in the same Gaussian coordinates as the theoretical surface.

Litvin, Faydor L.↗
NASA NTRS1989

Strut-node joint conjugates for the assembly of semi-permanent or reusable truss structures

When strut and node components are used for truss construction an assembly problem occurs if a strut must be fitted between nodes whose separation distance is either closer or farther than the design intended. This condition is the result of normal dimensional variations that occur in any manufacturing process. In such circumstances two actions would permit continued assembly: change the effective strut length, and move the nodes. Assuming continued assembly is the most attractive alternative, attention is focused on accomplishing these actions as part of the assembly process.

Brewer, W. V.↗
NASA NTRS1990

A model of filament-wound thin cylinders

A model was developed for simulating he manufacturing process of filament-wound cylinders made of a thermoset matrix composite. The model relates the process variables (winding speed, fiber tension, applied temperature) to the parameters characterizing the composite cylinder and the mandrel. The model is applicable to cylinders for which the diameter is large compared to the wall thickness. The model was implemented by a user-friendly computer code suitable for generating numerical results.

Calius, Emilio P.↗
NASA NTRS1989

A rationale for atmospheric monitoring on Space Station Freedom

The atmosphere monitoring needs for the Space Station Freedom are identified by examining the monitoring requirements for supplied breathing air in confined spaces, as in the case of submarines and the Shuttle. Some other factors influencing the monitoring requirements for Space Station Freedom are also identified. These include: the experience of past missions and ground based tests; the proposed experimental and manufacturing processes and their hazards; and limitations of the life support systems.

Casserly, Dennis M.↗
NASA NTRS1989

Photovoltaic array environmental protection program

During the photovoltaic array environmental protection program, a coating material, application technique, and design approach intended to protect flexible solar array blankets during a nominal fifteen-year operating lifetime were developed. Numerous thin-film coatings for protecting the Kapton polyimide material used in the construction of the Space Station Freedom flexible solar array blanket were evaluated. The critical solar array design features and protection measures are discussed with special emphasis on the effects of solar array fabrication and flexible printed circuit manufacturing processes on coating durability. The results of the mechanical and environmental test evaluation, including oxygen plasma, neutral oxygen beam, and UV/charged-particle combined exposure, are discussed. These results led to the selection of a silicon dioxide thin-film coating to protect the solar array blanket from the low-earth-orbit atomic oxygen environment.

Bilger, Kevin M.↗