Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MIXING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29

Little prairie under the panel: testing native pollinator habitat seed mix establishment at three utility-scale solar sites in Minnesota

Abstract As more land is being utilized for large-scale solar energy projects, there are increasing discussions from stakeholders on how to utilize land under solar panels to promote biodiversity. One path is to plant habitat beneficial to pollinators and other insects, but there have been few long-term studies that examine how different vegetation and seed mixes establish underneath solar panels. This study addresses a scientific gap to determine whether native pollinator seed mixes successfully establish over time under solar arrays using a systematic assessment of eight seed mixes planted at three utility-scale solar sites in Minnesota. We assess establishment with a percent native coverage metric, which is an assessment of native species observations compared to total observations during percent cover analyses in our vegetative test plots. The percent native coverage metric allows for a measurement of how the seed mix established and how the seed mix persists over time. The percent native coverage under and in between the solar photovoltaic (PV) arrays rose from 10% after one year of planting to 58% after three years across all sites, while the native coverage of the full sun control area rose from 9.6% to 70% under the same period, showing that native prairie and pollinator plants successfully established under the array, although to a lesser extent than in full sun conditions. Percent native coverage under the PV arrays rose 5- to 8-fold for each of the three sites from over the course of the study, while the coverage of weeds decreased for all three sites over the same period. Percent native coverage varied by seed mix over the project years, but every seed mix experienced a higher percent native coverage year after year under the PV arrays. Our results did not indicate a difference in establishment across placement within the array; the center, west, and east portions of the areas in between panels had similar establishment rates at two out of three sites, indicating that the same seed mix can be applied throughout the array. Out of 101 plant species seeded, we observed the establishment of 68 species in our vegetative test plots, and we detailed the top 20 observed species to inform future seed mix development. Based on these findings, native pollinator vegetation can establish over time at solar arrays, and it can be suitable for creating habitat at utility-scale solar sites.

14 SOLAR ENERGY↗

Mixed meson masses with domain-wall valence and staggered sea fermions

Mixed action lattice calculations allow for an additive lattice-spacing-dependent mass renormalization of mesons composed of one sea and one valence quark, regardless of the type of fermion discretization methods used in the valence and sea sectors. The value of the mass renormalization depends upon the lattice actions used. This mixed meson mass shift is an important lattice artifact to determine for mixed action calculations; because it modifies the pion mass, it plays a central role in the low-energy dynamics of all hadronic correlation functions. We determine the leading order, O(a{sup 2}), and next-to-leading order, O(a{sup 2}m{sub {pi}}{sup 2}), additive mass shift of valence-sea mesons for a mixed lattice action with domain-wall valence fermions and rooted staggered sea fermions, relevant to the majority of current large scale mixed action lattice efforts. We find that, on the asqtad-improved coarse MILC lattices, this additive mass shift is well parametrized in lattice units by {delta}(am){sup 2}=0.034(2)-0.06(2)(am{sub {pi}}){sup 2}, which in physical units, using a=0.125 fm, corresponds to {delta}(m){sup 2}=(291{+-}8 MeV){sup 2}-0.06(2)m{sub {pi}}{sup 2}. In terms of the mixed action effective field theory parameters, the corresponding mass shift is given by a{sup 2}{delta}{sub Mix}=(316{+-}4 MeV){sup 2} at leading order plus next-to-leading order corrections including the necessary chiral logarithms for this mixed action calculation, determined in this work. Within the precision of our calculation, one cannot distinguish between the full next-to-leading order effective field theory analysis of this additive mixed meson mass shift and the parametrization given above.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Unitarity constraints on trimaximal mixing

When the neutrino mass eigenstate {nu}{sub 2} is trimaximally mixed, the mixing matrix is called trimaximal. The middle column of the trimaximal mixing matrix is identical to tribimaximal mixing and the other two columns are subject to unitarity constraints. This corresponds to a mixing matrix with four independent parameters in the most general case. Apart from the two Majorana phases, the mixing matrix has only one free parameter in the CP conserving limit. Trimaximality results in interesting interplay between mixing angles and CP violation. A notion of maximal CP violation naturally emerges here: CP violation is maximal for maximal 2-3 mixing. Similarly, there is a natural constraint on the deviation from maximal 2-3 mixing which takes its maximal value in the CP conserving limit.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Mixing Pathways in Simple Box Models

Abstract Tracer variance budgets can be used to estimate bulk mixing in a control volume. For example, simple, analytical, bulk formulations of salt mixing, defined here as the destruction of salinity variance, can be found for estuaries with a riverine source of freshwater and a two-layer exchange flow at the mouth using salinity as a representative tracer. For a steady case, the bulk salt mixing M can be calculated as , where S in and S out are the representative salinities in the estuarine exchange flow, and Q R and Q in are the river and landward volume fluxes, respectively. The bulk salt mixing M can be considered as the sum of mixing pathways, where each pathway has a mixing of Q (Δ S ) 2 , where Q is the volume transport and Δ S is the salinity difference across the pathway. For the estuary case, one mixing path is associated with the river inflow, and the other is associated with the inflow of salty, oceanic water. This concept of linking mixing to input–output pathways is extended, in simple box models, from estuaries to scenarios with multiple inputs/outputs, as might be found in a complex estuarine/fjord network, in a region on a continental shelf, or any other control volume with multiple exchanges. This approach allows for the estimation of the relative contributions of each input–output pathway to the total mixing within a control volume.

54 ENVIRONMENTAL SCIENCES↗

Density functional theory investigation of the electronic structure and thermoelectric properties of layered MoS{sub 2}, MoSe{sub 2} and their mixed-layer compound

First principles density functional theory calculations were carried out for the 2H-MoQ{sub 2} (Q=S and Se) and their hypothetical mixed-layer compound. Due to the different electronegativities of S and Se atoms on MoQ{sub 2}, the band gap size could be adjusted in mixed-layer compound MoS{sub 2}/MoSe{sub 2}. Also, the indirect band gap in pure MoQ{sub 2} compounds is changed to the pseudo direct band gap in mixed-layer MoS{sub 2}/MoSe{sub 2} which is similar to the monolayer compound. The layer mixing enhances the thermoelectric properties because of the increased density of states around the Fermi level and the decreased band gap size. Therefore, we suggest that this layer mixing approach should be regarded as a useful way to modulate their electronic structures and to improve their thermoelectric properties. -- Graphical abstract: On the basis of density functional calculations we predict that the mixed-layer compounds 2H-MoS{sub 2}/2H-MoSe{sub 2}, in which two different layers 2H-MoS{sub 2} and 2H-MoSe{sub 2}, have enhanced thermoelectric properties because of the increased density of states around the Fermi level and the decreased band gap size. Highlights: • We explored a way of improving TE properties of 2H-MoQ{sub 2} on DFT methods. • The mixed-layer compounds MoS{sub 2}/MoSe{sub 2} have enhanced thermoelectric properties. • This is caused by modulated electronic structure of mixed layer compound. • Layer mixing approach should be regarded as a useful way to improve TE properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Destabilization of binary mixing layer in supercritical conditions

Compressible mixing layer instabilities are of importance to a wide range of environmental and industrial applications. Past studies have focused on either ideal-gas or real-fluid thermodynamic regimes of single-species mixing layers. However, mixing layers of binary mixtures at supercritical conditions, commonly encountered in fuel injection systems, introduce additional complexities due to the added compositional degree-of-freedom. Moreover, the effect of strong variations in thermodynamic response functions across the Widom line on the binary mixing layer stability remains poorly understood. Thus, the objective of this study is to examine the coupling between the hydrodynamic instability and the real-fluid thermodynamics across the Widom line and its effects on the overall binary mixing layer dynamics. To this end, we develop a linear stability analysis of the full binary-species compressible transport equations coupled with the PC-SAFT equation of state. Analysis shows the existence of a novel instability mechanism that arises from juxtapositioning of the Widom-line transition and the hydrodynamic inflection point. This novel thermodynamically induced instability mechanism has the net effect of destabilizing the binary mixing layer at lowering supercritical conditions towards the critical pressure point. This is in contrast to previous stability analyses of supercritical single-species mixing layers, where increasing pressure destabilizes the flow due to its effect on reducing the density stratification. The discovered thermodynamically induced instability mechanism of binary mixing flows highlights the need for an extension of classical instability criteria to incorporate the effect of strong variations in the thermodynamic response functions across the Widom line on mixing layer instability.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Examination of turbulent entrainment-mixing mechanisms using a combined approach

Turbulent entrainment-mixing mechanisms are investigated by applying a combined approach to the aircraft measurements of three drizzling and two nondrizzling stratocumulus clouds collected over the U.S. Department of Energy's Atmospheric Radiation Measurement Southern Great Plains site during the March 2000 cloud Intensive Observation Period. Microphysical analysis shows that the inhomogeneous entrainment-mixing process occurs much more frequently than the homogeneous counterpart, and most cases of the inhomogeneous entrainment-mixing process are close to the extreme scenario, having drastically varying cloud droplet concentration but roughly constant volume-mean radius. It is also found that the inhomogeneous entrainment-mixing process can occur both near the cloud top and in the middle level of a cloud, and in both the nondrizzling clouds and nondrizzling legs in the drizzling clouds. A new dimensionless number, the scale number, is introduced as a dynamical measure for different entrainment-mixing processes, with a larger scale number corresponding to a higher degree of homogeneous entrainment mixing. Further empirical analysis shows that the scale number that separates the homogeneous from the inhomogeneous entrainment-mixing process is around 50, and most legs have smaller scale numbers. Thermodynamic analysis shows that sampling average of filament structures finer than the instrumental spatial resolution also contributes to the dominance of inhomogeneous entrainment-mixing mechanism. The combined microphysical-dynamical-thermodynamic analysis sheds new light on developing parameterization of entrainment-mixing processes and their microphysical and radiative effects in large-scale models.

54 ENVIRONMENTAL SCIENCES↗

Consideration of Initial Cloud Droplet Size Distribution Shapes in Quantifying Different Entrainment-Mixing Mechanisms

Entrainment-mixing process significantly affects cloud micro/macrophysics and the evaluation of aerosol indirect effects. However, it remains an open question as to how to quantify entrainment-mixing mechanism for broad cloud droplet size distributions (CDSDs). Here, CDSDs with different spectral widths are used to initialize the Explicit Mixing Parcel Model to address this problem, and microphysical properties are compared for different CDSD widths. For relatively broad CDSDs, as the number concentration and liquid water content decrease, the volume-mean radius and mean radius increase, which is opposite to the scenario for relatively narrow CDSDs and the homogeneous/inhomogeneous conceptual model. For the relatively broad CDSDs, such relationships could be mistaken as inhomogeneous mixing with subsequent ascent in analysis of the conventional microphysical mixing diagram. This then causes traditional homogenous mixing degrees to be unrealistically negative and not applicable for relatively broad CDSDs. New measures are introduced to explicitly account for the effect of CDSD spectral shapes on quantifying entrainment-mixing mechanism. The new measures yield reasonable ranges of values that conform to the dynamical measures such as the Damköhler and transitional scale numbers, and their temporal variation can be explained physically. This study extends the measures of homogeneous mixing degrees from narrow to broad CDSDs, and sheds new light on the consideration of CDSD shapes in parameterizations of entrainment-mixing mechanism.

54 ENVIRONMENTAL SCIENCES↗

Evolving Interior Mixing Regimes in a Tidal River Plume

Microstructure profiling was utilized to estimate vertical mixing (via vertical turbulent buoyancy flux) during a tidal pulse in the interior Merrimack River plume in calm winds. Multiple stratified shear mixing regimes appear and evolve with time. Initially the plume acts as a nearfield jet, with mixing in the plume (plume layer mixing) and over the plume-ambient interface (nearfield interfacial mixing). As the plume grows, interfacial mixing is suppressed offshore of the nearfield as currents slow, diminishing turbulent exchange between plume and shelf. At the end of ebb, ambient tidal currents reverse direction below plume, initiating another mode of internal, interfacial mixing (coined here as tidal interfacial mixing), allowing exchange between plume and ambient waters offshore. This work highlights previously unreported tidally modulated mixing within the near and midfield of a river plume.

54 ENVIRONMENTAL SCIENCES↗

A Model Intercomparison Study to Investigate Mixing Characteristics in Non‐Precipitating Stratocumulus Clouds

Recent aircraft observations of marine stratocumulus clouds consistently showed that cloud microphysical relationships vary with altitude, indicating inhomogeneous mixing characteristics near cloud top and homogeneous mixing characteristics in mid-levels of clouds. Here, we conduct model intercomparison of an idealized, non-precipitating stratocumulus cloud to evaluate model consistency and examine whether simulations can reproduce the observed mixing characteristics. The results show that eleven large-eddy simulations with various dynamics and microphysics schemes show good agreement on the thermodynamical, microphysical, and dynamical properties of the stratocumulus-topped boundary layer in a steady state. The inter-model spread in steady-state liquid water path is significantly reduced compared to previous model intercomparison studies. This improvement might be due to better models and more consistent initial conditions than those used decades ago. In addition, most simulations, including a low-dimensional simulation, capture inhomogeneous mixing characteristics near the cloud top and homogeneous mixing characteristics inside the cloud. Moreover, simulations using Lagrangian microphysics schemes agree better with the observed mixing characteristics compared with those using the bin microphysics schemes. Since most simulations do not fully resolve the entrainment process, the apparent mixing characteristics arise from the variations in the resolved cloud properties. Our results support the vertical circulation mixing hypothesis, which suggests that homogeneous mixing characteristics in mid-levels of clouds are due to the vertical circulation of entrainment-affected and diluted parcels from the cloud top moved to lower levels.

54 ENVIRONMENTAL SCIENCES↗

Quantification of mixing in vesicle suspensions using numerical simulations in two dimensions

Here, we study mixing in Stokesian vesicle suspensions in two dimensions on a cylindrical Couette apparatus using numerical simulations. The vesicle flow simulation is done using a boundary integral method, and the advection-diffusion equation for the mixing of the solute is solved using a pseudo-spectral scheme. We study the effect of the area fraction, the viscosity contrast between the inside (the vesicles) and the outside (the bulk) fluid, the initial condition of the solute, and the mixing metric. We compare mixing in the suspension with mixing in the Couette apparatus without vesicles. On the one hand, the presence of vesicles in most cases slightly suppresses mixing. This is because the solute can be only diffused across the vesicle interface and not advected. On the other hand, there exist spatial distributions of the solute for which the unperturbed Couette flow completely fails to mix whereas the presence of vesicles enables mixing. Finally, we derive a simple condition that relates the velocity and solute and can be used to characterize the cases in which the presence of vesicles promotes mixing.

42 ENGINEERING↗

Simultaneous diagnosis of radial profiles and mix in NIF ignition-scale implosions via X-ray spectroscopy

In a National Ignition Facility implosion, hydrodynamic instabilities may cause the cold material from the imploding shell to be injected into the hot-spot (hot-spot mix), enhancing the radiative and conductive losses, which in turn may lead to a quenching of the ignition process. The bound-bound features of the spectrum emitted by high-Z ablator dopants that get mixed into the hot-spot have been previously used to infer the total amount of mixed mass; however, the typical errorbars are larger than the maximum tolerable mix. We present in this paper an improved 2D model for mix spectroscopy which can be used to retrieve information on both the amount of mixed mass and the full imploded plasma profile. By performing radiation transfer and simultaneously fitting all of the features exhibited by the spectra, we are able to constrain self-consistently the effect of the opacity of the external layers of the target on the emission, thus improving the accuracy of the inferred mixed mass. The model's predictive capabilities are first validated by fitting simulated spectra arising from fully characterized hydrodynamic simulations, and then, the model is applied to previously published experimental results, providing values of mix mass in agreement with previous estimates. Finally, we show that the new self consistent procedure leads to better constrained estimates of mix and also provides insight into the sensitivity of the hot-spot spectroscopy to the spatial properties of the imploded capsule, such as the in-flight aspect ratio of the cold fuel surrounding the hotspot.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Spin susceptibility, upper critical field, and disorder effect in $j = \frac{3}{2}$ superconductors with singlet–quintet mixing

Recently, a new pairing state with the mixing between the s-wave singlet channel and the isotropic d-wave quintet channel induced by centrosymmetric spin–orbit coupling has been theoretically proposed in the superconducting materials with $j = \frac{3}{2}$ electrons [J. Yu and C.-X. Liu, Phys. Rev. B 98, 104514 (2018)]. In this article, we derive the expressions of the zero-temperature spin susceptibility, the upper critical field close to the zero-field critical temperature T c , and the critical temperature with weak random non-magnetic disorders for the singlet–quintet mixed state based on the Luttinger model. Our study reveals the following features of the singlet–quintet mixing. (1) The zero-temperature spin susceptibility remains zero for the singlet–quintet mixed state if only the centrosymmetric spin–orbit coupling is taken into account and deviates from zero when the non-centrosymmetric spin–orbit coupling is introduced. (2) The singlet–quintet mixing can help enhance the upper critical field roughly because it can increase T c . (3) Although the quintet channel is generally suppressed by the non-magnetic disorder scattering, we find the strong mixing between singlet and quintet channels can help to stabilize the quintet channel. As a result, we still find a sizable quintet component mixed into the singlet channel in the presence of weak random non-magnetic disorders. Our work provides the guidance for future experiments on spin susceptibility and upper critical field of the singlet–quintet mixed superconducting states and illustrates the stability of the singlet–quintet mixing against the weak random non-magnetic disorder.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

An investigation of non-canonical mixing in red giant stars using APOGEE 12 C/ 13 C ratios observed in open cluster stars

Standard stellar evolution theory poorly predicts the surface abundances of chemical species in low-mass, red giant branch (RGB) stars. Observations show an enhancement of p–p chain and CNO cycle products in red giant envelopes, which suggests the existence of non-canonical mixing that brings interior burning products to the surface of these stars. The 12 C/ 13 C ratio is a highly sensitive abundance metric used to probe this mixing. We investigate extra RGB mixing by examining: (1) how 12 C/ 13 C is altered along the RGB, and (2) how 12 C/ 13 C changes for stars of varying age and mass. Our sample consists of 43 red giants, spread over 15 open clusters from the Sloan Digital Sky Survey’s APOGEE DR17, that have reliable 12 C/ 13 C ratios derived from their APOGEE spectra. We vetted these 12 C/ 13 C ratios and compared them as a function of evolution and age/mass to the standard mixing model of stellar evolution, and to a model that includes prescriptions for RGB thermohaline mixing and stellar rotation. We find that the observations deviate from standard mixing models, implying the need for extra mixing. Additionally, some of the abundance patterns depart from the thermohaline model, and it is unclear whether these differences are due to incomplete observations, issues inherent to the model, our assumption of the cause of extra mixing, or any combination of these factors. Nevertheless, the surface abundances across our age/mass range clearly deviate from the standard model, agreeing with the notion of a universal mechanism for RGB extra mixing in low-mass stars.

79 ASTRONOMY AND ASTROPHYSICS↗

Mixed sneutrinos, dark matter, and the CERN LHC

We study the phenomenology of supersymmetric models in which gauge-singlet scalars mix with the minimal supersymmetric standard model (MSSM) sneutrinos through weak-scale A terms. After reviewing the constraints on mixed-sneutrino dark matter from measurements of {omega}{sub CDM} and from direct-detection experiments, we explore mixed-sneutrino signatures relevant to the LHC. For a mixed-sneutrino lightest supersymmetric particle (LSP) and a right-handed slepton next-to-lightest supersymmetric particle (NLSP), decays of the lightest neturalino can produce opposite-sign, same-flavor (OSSF) dileptons with an invariant-mass distribution shifted away from the kinematic end point. This signature is possible for parameters that lead to a cosmologically viable mixed-sneutrino LSP. We also consider signatures that require larger mixing angles than preferred for mixed-sneutrino dark matter, but which are possible regardless of whether a mixed-sneutrino is the LSP. In some parameter regions, the charginos and neutralinos produced in cascades all decay dominantly to the lighter sneutrinos, leading to a kinematic edge in the jet-lepton invariant-mass distribution from the decay chain q-tilde{yields}{chi}{sup -}q{yields}{nu}-tilde*lq, without an OSSF dilepton signature. We explore the possibility of using mass-estimation methods to distinguish this mixed-sneutrino jet-lepton signature from an MSSM one. Finally, we consider signatures associated with Higgs-lepton or Z-lepton production in cascades involving the heavier sneutrinos.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Verifying mixing in dilution tunnels How to ensure cookstove emissions samples are unbiased

A well-mixed diluted sample is essential for unbiased measurement of cookstove emissions. Most cookstove testing labs employ a dilution tunnel, also referred to as a “duct,” to mix clean dilution air with cookstove emissions before sampling. It is important that the emissions be well-mixed and unbiased at the sampling port so that instruments can take representative samples of the emission plume. Some groups have employed mixing baffles to ensure the gaseous and aerosol emissions from cookstoves are well-mixed before reaching the sampling location [2, 4]. The goal of these baffles is to to dilute and mix the emissions stream with the room air entering the fume hood by creating a local zone of high turbulence. However, potential drawbacks of mixing baffles include increased flow resistance (larger blowers needed for the same exhaust flow), nuisance cleaning of baffles as soot collects, and, importantly, the potential for loss of PM2.5 particles on the baffles themselves, thus biasing results. A cookstove emission monitoring system with baffles will collect particles faster than the duct’s walls alone. This is mostly driven by the available surface area for deposition by processes of Brownian diffusion (through the boundary layer) and turbophoresis (i.e. impaction). The greater the surface area available for diffusive and advection-driven deposition to occur, the greater the particle loss will be at the sampling port. As a layer of larger particle “fuzz” builds on the mixing baffles, even greater PM2.5 loss could occur. The micro structure of the deposited aerosol will lead to increased rates of particle loss by interception and a tendency for smaller particles to deposit due to impaction on small features of the micro structure. If the flow stream could be well-mixed without the need for baffles, these drawbacks could be avoided and the cookstove emissions sampling system would be more robust.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Controls on Incomplete Mixing of Injected Raw Water and Brine in Strategic Petroleum Reserve Salt Caverns

Mixing of injected raw (undersaturated) water with brine in Strategic Petroleum Reserve (SPR) salt caverns affects the shape of cavern walls due to leaching. Cavern shape impacts cavern geomechanical stability and available volume for oil storage. Raw water injection occurs during initial solution mining of caverns, remedial leaching of caverns, and oil drawdown. Of interest are factors that control the degree of raw water-brine mixing and thereby the concentration of the aqueous fluid mixture that contacts the salt cavern walls. It is hypothesized that poorly-mixed fresh water could potentially cause undesirable and non-uniform leaching , for example, if buoyant poorly-mixed fresh water collects and preferentially leaches under the oil-brine interface . This report presents current understanding of controls on incomplete-to-complete mixing of raw water and brine, focusing on implications for SPR cavern leaching. In the context of mixing, we review the following: SPR leaching operations; models of leaching; field measurements of leaching and cavern shapes; and previous laboratory experiments of mixing and /or leaching performed at Sandia National Laboratories. We present recent laboratory experiments in 2014-2016 that focused explicitly on understanding controls of poor-to-well mixed conditions. We find that well-mixed conditions are expected for typical operating conditions of the SPR.

04 OIL SHALES AND TAR SANDS↗

Comparing measurements of the mixing layer height to modeled values

The mixing layer height (MLH) is the top layer of turbulent mixing within the lower atmosphere, above the Earth’s surface. Estimates of the mixing layer height allow us to determine the volume available for the dispersion of pollutants throughout the atmosphere. Our goal is to identify the most suitable mixing layer height input for our dispersion modeling tool (AERMOD). For this project we evaluated two different methods of estimating the local mixing layer height. First, we use 3 estimates of the mixing layer height obtained from a ceilometer, each height estimate corresponds to a different gradient in aerosol backscatter which is used as a proxy for mixing layer height identification. Second, we use AERMET, our AERMOD modeling system preprocessor for meteorological data, which estimates the mixing layer height using several equations combined with measured meteorological data. We evaluate the ceilometer and AERMET estimates over a 5-year period (2015-2019) to see how well aligned the estimated mixing layer heights are. Our results suggest that our model, AERMET, is on average, aligned with ceilometer estimates during the daytime hours. However, daily maximum MLH estimates by AERMET occur earlier in the day than those estimated by the ceilometer. We believe that the ceilometer struggles with accurately measuring the MLH during nighttime hours as a result of sensor limitations.

54 ENVIRONMENTAL SCIENCES↗