Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MITIGATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29
All sourcesNASA NTRSDOE OSTI
NASA NTRS1991

Significant reduction in arc frequency biased solar cells: Observations, diagnostics, and mitigation technique(s)

A variety of experiments were performed which identify key factors contributing to the arcing of negatively biased high voltage solar cells. These efforts have led to reduction of greater than a factor of 100 in the arc frequency of a single cell following proper remediation procedures. Experiments naturally lead to and focussed on the adhesive/encapsulant that is used to bond the protective cover slip to the solar cell. An image-intensified charge coupled device (CCD) camera system recorded UV emission from arc events which occurred exclusively along the interfacial edge between the cover slip and the solar cell. Microscopic inspection of this interfacial region showed a bead of encapsulant along this entire edge. Elimination of this encapsulant bead reduced the arc frequency by two orders of magnitude. Water contamination was also identified as a key contributor which enhances arcing of the encapsulant bead along the solar cell edge. Spectrally resolved measurements of the observable UV light shows a feature assignable to OH(A-X) electronic emission, which is common for water contaminated discharges. Experiments in which the solar cell temperature was raised to 85 C showed a reduced arcing frequency, suggesting desorption of H2O. Exposing the solar cell to water vapor was shown to increase the arcing frequency. Clean dry gases such as O2, N2, and Ar show no enhancement of the arcing rate. Elimination of the exposed encapsulant eliminates any measurable sensitivity to H2O vapor.

Upschulte, B. L.↗
NASA NTRS1990

Large space systems in global change mitigation

The monitoring from space of such processes as the greenhouse effect and depletion of the ozone layer is discussed, as well as possibilities for active intervention in them, using space systems. Possibilities include the use of the Solar Power Satellite to reduce dependence on the burning of fossil fuels, dispersal of materials to neutralize chemicals responsible for ozone depletion, and measures to reduce the impact of local disasters, both natural and man-made.

Jenkins, Lyle M.↗
NASA NTRS1991

The application of differential roughness to mitigate friction and wear

By definition, differential roughness occurs where the surface roughness of one region is distinctly different from that of an adjacent region. Differential roughness may occur on a sliding surface when the structure of an area of the surface is modified relative to the original material. Differential roughness may be used to effect a film thickness change so as to cause hydrodynamic or hydrostatic lubrication effects just as if the surfaces were machined. The advantage of differential roughness is that the effective offset of film thickness continues to exist even if there is gross wear. One can effect film thickness changes which are smaller than can be made directly. Furthermore, asperity tip load support is the same over both the high roughness and small roughness regions. The potential uses for differential roughness are seals, bearings, and pumps. Some examples are presented.

Lebeck, Alan O.↗
NASA NTRS1991

Techniques for debris mitigation

Techniques for space debris abatement and removal are discussed. Characteristics of the total debris population and the low Earth orbit population are illustrated. Self disposal options that utilize propulsion maneuvers and drag augmentation devices are described. The active retrieval and disposition of large debris objects by collection with a maneuverable space vehicle are discussed. The removal of small debris by using a solar reflector to melt particles or by destruction with high energy laser devices is discussed.

Loftus, Joseph P., Jr.↗
NASA NTRS1990

Mobile satellite services for public safety, disaster mitigation and disaster medicine

Between 1967 and 1987 nearly three million lives were lost and property damage of $25 to $100 billion resulted form natural disasters that adversely affected more than 829 million people. The social and economic impacts have been staggering and are expected to grow more serious as a result of changing demographic factors. The role that the Mobile Satellite Service can play in the International Decade is discussed. MSS was not available for disaster relief operations during the recent Loma Prieta/San Francisco earthquake. However, the results of a review of the performance of seven other communication services with respect to public sector operations during and shortly after the earthquake are described. The services surveyed were: public and private telephone, mobile radio telephone, noncellular mobile radio, broadcast media, CB radio, ham radio, and government and nongovernment satellite systems. The application of MSS to disaster medicine, particularly with respect to the Armenian earthquake is also discussed.

Freibaum, Jerry↗
NASA NTRS1991

Countermeasures for mitigating the effects of global environment changes

Environmental countermeasures for preventing the negative effects of global climate change and ozone depletion are discussed with special emphasis on the possibilities of space-based actions. Among the programs addressed are the Mission to Planet Earth, the Solar Power Satellite (and linkage to the Space Exploration Initiative), and proposed projects such as a lunar-based power generator that utilizes He-3 as a fusion fuel when combined with deuterium. The concept of regional working groups is proposed for initiating the programs for effective countermeasures.

Jenkins, Lyle M.↗
NASA NTRS1993

EOS instrument jitter assessment and mitigation

Instrument-induced pointing stability and jitter are significant design drivers for the Earth Observing System (EOS) AM spacecraft. Techniques for determining the rigid and flexible body pointing jitter contributions have been developed and applied to the EOS AM spacecraft. The contribution of each instrument on itself, on the spacecraft and on other instruments is addressed. Rigid body effects are separated from flexible body effects to allow focus on the localized vibrational jitter.

Ram, M.↗
NASA NTRS1992

Mitigation of adverse environmental effects on lunar-based astronomical instruments

The galactic cosmic-ray flux incident on the moon was examined for its potential adverse impact on the performance of the large lunar telescope (LLT) proposed as a part of NASA's Space Exploration Initiative (SEI). Noise produced by the cosmic-ray flux in the charge coupled devices to be used as the primary photodetector in the telescope was estimated. It was calculated that approximately 2.5 m of regolith would provide the shielding necessary to reduce the noise to an acceptable level. Dust is an omnipresent environmental concern for any human-assisted or robotic scientific instruments deployed on the moon. The degree to which dust poses an operational risk to the telescope was examined. Three potential methods for reducing this risk were identified: locating scientific instruments at remote locations; utilizing a prepared, dust-free site for all rocket activities; and covering the optics during high-risk times.

Johnson, Charles L.↗
NASA NTRS1992

Mental rotation - A key to mitigation of motion sickness in the virtual environments?

If mental rotation is important for the reduction of motion sickness and complement performance in virtual environments (VEs), the use of the Howard (1982) mental rotation test battery may identify individuals with lower susceptibility to VE-induced motion sickness and therefore a greater probability of success as VE operators. An apparatus and its associated procedures are currently under development for astronaut microgravity training aimed at reducing motion sickness; it is hypothesized that this system may be of significance to VE testing and training.

Parker, Donald E.↗
NASA NTRS1994

Mitigation of adverse environmental effects on lunar-based astronomical instruments

The galactic cosmic-ray flux incident on the Moon was examined for its potential adverse impact on the performance of the large lunar telescope (LLT) proposed as a part of NASA's Space Exploration Initiative (SEI). Noise produced by the cosmic-ray flux in the charge coupled devices (CCD's) to be used as the primary photodetector in the telescope was estimated. It was calculated that approximately 2.5 m of regolith would provide the shielding necessary to reduce the noise to an acceptable level. Dust is an omnipresent environmental concern for any human-assisted or robotic scientific instruments deployed on the Moon. The degree to which dust poses an operational risk to the telescope was examined. Three potential methods for reducing this risk were identified: locating scientific instruments at remote locations; utilizing a prepared, dust-free site for all rocket activities; and covering the optics during high-risk times.

Johnson, Les↗
NASA NTRS1992

Orbital debris minimization and mitigation techniques

Man's activity in space has generated significant amounts of debris that remain in orbit for periods of sufficient duration to become a hazard to future space activities. Upper stages and spacecraft that have ended their functional life are the largest objects. In the past, additional debris has been generated by inadvertent explosions of upper stages and spacecraft, by intentional explosions for military reasons, and possibly by a few breakups resulting from collisions. In the future, debris can be generated by collisions among spacecraft as the number of orbital objects continues to grow at rates greater than natural forces remove them from orbit. There are design and operations practices that can minimize the inadvertent generation of debris. There are other design and operations options for removing objects from space at the end of their useful service so they are not available as a source for the generation of future debris. Those studies are the primary concern of this paper. The most economic removal of objects is achieved when those objects have the capability to execute the necessary maneuvers with their own systems and resources. The most costly option is to have some other system remove the spacecraft after it has become a derelict. Numerous options are being studied to develop systems and techniques that can remove spacecraft from useful orbits at the end of their useful life and do so for the least mass penalty and economic cost.

Loftus, Joseph P., Jr.↗
NASA NTRS1996

The search for materials to mitigate spacecraft charging

As spacecraft orbit the earth, they encounter a variety of particles and radiation. Charged particles are common enough that a spacecraft can collect substantial charges on its surfaces. If these charges are not bled off, they can accumulate until electrostatic discharges occur between a charged surface and some lower-potential location on the craft. Electrostatic discharge (ESD) is the suspected culprit in a number of spacecraft failures. Silverized Teflon film has become the standard heat-reflecting outer layer of spacecraft because of its flexibility, chemical inertness, and low volatiles content. However, as spacecraft are designed to operate in orbits with greater probability of accumulating enough ions and electrons to create ESD, the Teflon-based thermal control blankets are becoming a liability. Unless stringent (and sometimes burdensome) shielding measures are taken, ESD can upset delicate electronic systems by upsetting or destroying components, interfering with radio signals, garbling internal instructions, and so on. As orbits become higher and more eccentric, as electronics become more sensitive, and as fault-free operation becomes more crucial, it is becoming necessary to find a replacement for silver/Teflon that has comparable strength, flexibility and chemical inertness, as well as a much lower potential for ESD. This is a report of the steps taken toward the goal of selecting a replacement for silver/Teflon during the Summer of 1995. It is a condensation of a much larger report available on request from the author. Three tasks were undertaken. Task 1 was to specify desirable properties for thermal control blankets. The second task was to collect data on materials properties from the literature and organize into a format useful for identifying candidate materials. The third task was to identify candidate materials and begin testing.

Losure, Nancy S.↗
NASA NTRS2000

Mitigating Adverse Effects of a Human Mission On Possible Martian Indigenous Ecosystems

Although human beings are, by most standards, the most capable agents to search for and detect extraterrestrial life, we are also potentially the most harmful. While there has been substantial work regarding forward contamination with respect to robotic missions, the issue of potential adverse effects on possible indigenous Martian ecosystems, such as biological contamination, due to a human mission has remained relatively unexplored and may require our attention now as this presentation will try to demonstrate by exploring some of the relevant scientific questions, mission planning challenges, and policy issues. An informal, high-level mission planning decision tree will be discussed and is included as the next page of this abstract. Some of the questions to be considered are: To what extent could contamination due to a human presence compromise possible indigenous life forms? To what extent can we control contamination? For example, will it be local or global? What are the criteria for assessing the biological status of Mars, both regionally and globally? For example, can we adequately extrapolate from a few strategic missions such as sample return missions? What should our policies be regarding our mission planning and possible interaction with what are likely to be microbial forms of extraterrestrial life? Central to the science and mission planning issues is the role and applicability of terrestrial analogs, such as Lake Vostok for assessing drilling issues, and modeling techniques. Central to many of the policy aspects are scientific value, international law, public concern, and ethics. Exploring this overall issue responsibly requires an examination of all these aspects and how they interrelate.

Lupisella, Mark L.↗
NASA NTRS2000

Integrated Orbiter/International Space Station Air Quality Analysis for Post-Mission 2A.1 Risk Mitigation

Even under the assumption that all Orbiter and ISS elements would be operating as designed, condensation control and crewmember comfort were paramount issues preceding each of the ISS Missions 2A and 2A.1. However, crewmember discomfort during Mission 2A.1, in addition to evidence provided by flight data and observations, suggested that countermeasures would be necessary for future flights where the Orbiter provides primary control. A review of Space Shuttle Program (SSP) and International Space Station Program (ISSP) assumptions and analytical methods that describe ECLS transport phenomena was accomplished in order to ensure the veracity of future analyses. Subsequently, various analyses and interpretations of Mission 2A.1 flight data provided the necessary information to help understand the probable causes of the flight environment. With cooperation between the SSP and ISSP, countermeasures were devised for Mission 2A.2 that would likely improve the delivery of conditioned air by the Orbiter to the ISS as well as within the ISS elements.

RISK MANAGEMENT↗
NASA NTRS2002

Space Radiation Cancer Risk Projections for Exploration Missions: Uncertainty Reduction and Mitigation

In this paper we discuss expected lifetime excess cancer risks for astronauts returning from exploration class missions. For the first time we make a quantitative assessment of uncertainties in cancer risk projections for space radiation exposures. Late effects from the high charge and energy (HZE) ions present in the galactic cosmic rays including cancer and the poorly understood risks to the central nervous system constitute the major risks. Methods used to project risk in low Earth orbit are seen as highly uncertain for projecting risks on exploration missions because of the limited radiobiology data available for estimating HZE ion risks. Cancer risk projections are described as a product of many biological and physical factors, each of which has a differential range of uncertainty due to lack of data and knowledge. Monte-Carlo sampling from subjective error distributions represents the lack of knowledge in each factor to quantify risk projection overall uncertainty. Cancer risk analysis is applied to several exploration mission scenarios. At solar minimum, the number of days in space where career risk of less than the limiting 3% excess cancer mortality can be assured at a 95% confidence level is found to be only of the order of 100 days.

Cucinotta, Francis↗
NASA NTRS2003

Models Required to Mitigate Impacts of Space Weather on Space Systems

This viewgraph presentation attempts to develop a model of factors which need to be considered in the design and construction of spacecraft to lessen the effects of space weather on these vehicles. Topics considered include: space environments and effects, radiation environments and effects, space weather drivers, space weather models, climate models, solar proton activity and mission design for the GOES mission. The authors conclude that space environment models need to address issues from mission planning through operations and a program to develop and validate authoritative space environment models for application to spacecraft design does not exist at this time.

Barth, Janet L.↗
NASA NTRS2003

Orbital Debris Mitigation at GSFC

Contents include the following: SNOE and HST orbital debris analysis. Missions in development-design for demise effort. Applied engineering and technology directorate other on-going efforts.

San, Josephine↗
NASA NTRS2004

Designing to Mitigate Food Growing Failures in Space

Future space life support systems may use crop plants to grow most of the crew s food. A harvest failure can reduce the food available for future consumption. If the previously stored food is insufficient to reach the next harvest, the crew may go hungry. This paper considers how the overall food supply system should be modified to cope with food production failures. The food supply concept for a mission will use grown food, or stored food, cIr both. The optimum food supply mix depends on the costs and failure probabilities of stored and grown food. A simple food system model assumes that either we obtain the nominal harvest or a failure occurs and no food is harvested. Given the probability that any particular harvest fails, it is easy to compute the expected number of failures and the total food shortfall over a mission. If some food is grown and the probability of harvest failure is high, a non-redundant system has an unacceptable likelihood that the crew will have no food for a full harvest period. Food supply reliability must be increased either by supplying more food initially or by increasing food production capacity. We can obtain a very reliable food supply even when the harvest failure rate is high. If the cost of growing food is much less than the cost of providing stored food, it is better to provide redundant food growing capacity than to increase initial storage. A more realistic biomass production failure model allows the harvest amount or time to vary around the nominal values, using stochastic modeling with repeated Monte Carlo simulation, but such failures have minor impact compared to a complete harvest failure.

Jones, Harry↗