Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MINERALIZATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29

Radiocarbon analysis as a method for verifying atmospheric CO 2 uptake during carbon mineralization

Sequestration of atmospheric CO 2 is required to constrain the warming of Earth’s climate. Carbon mineralization refers to the precipitation of carbonate minerals by reaction of CO 2 and Mg- and Ca-rich rocks; if the source of the CO 2 is atmospheric and the precipitated carbonate is protected from subsequent dissolution, this process at sufficient scale may be able to reliably draw down atmospheric greenhouse gas levels. Such reactions occur passively in ultramafic settings and previous work has demonstrated that they actively draw down local CO 2 (g) concentrations. However, a method for unambiguously attributing the sequestered carbon solid product to atmospheric sources is still lacking. Here, we test if radiocarbon can be used to verify that the carbon being incorporated into carbonate minerals during carbon mineralization is atmospheric in origin. Additionally, samples from recently exposed ultramafic sites are analyzed and the results demonstrate the utility of this technique for verifying true atmospheric carbon reduction.

58 GEOSCIENCES↗

Pressurized in situ X-ray diffraction insights into super/subcritical carbonation reaction pathways of steelmaking slags and constituent silicate minerals

This study explores mineral carbonation of industrial stainless steelmaking slags and relevant synthetic constituent minerals via in situ pressurized X-ray diffraction, to clarify carbonation reaction pathways and efficiency for carbon storage and waste valorization. The primary mineral phases of Argon Oxygen Decarburization (AOD) and Continuous Casting (CC) slags, namely, åkermanite, bredigite, cuspidine, merwinite, and β- and γ-C 2 S, were reacted in a custom-built beryllium-capped XRD reactor filled with either water-saturated (wet) subcritical CO 2 (g), or wet supercritical CO 2(SC) , in a series of carbonation experiments. Formation of calcite and aragonite was observed for most Ca-bearing minerals, transient precipitation of metastable vaterite was observed, while carbonation of AOD and CC slags in CO 2(SC) resulted in hydrated crystalline calcium carbonates and indirect evidence of amorphous carbonate. Overall, results obtained suggest that low-pressure subcritical carbonation routes are attractive for standalone slag carbonation processes, while high-pressure supercritical carbonation routes are amiable to symbiotic integration with CO 2(SC) -generating green technologies.

42 ENGINEERING↗

Parts-Per-Million Carbonate Mineral Quantification with Thermogravimetric Analysis–Mass Spectrometry

Mitigating the deleterious effects of climate change requires the development and implementation of carbon capture and storage technologies. To expand the monitoring, verification, and reporting (MRV) capabilities of geologic carbon mineralization projects, we developed a thermogravimetric analysis–mass spectrometry (TGA–MS) methodology to enable quantification of <100 ppm calcite (CaCO 3 ) in complex samples. We extended TGA–MS calcite calibration curves to enable a higher measurement resolution and lower limits of quantification for evolved CO 2 from a calcite–corundum mixture. We demonstrated <100 ppm carbonate mineral quantification with TGA–MS for the first time, an outcome applicable across earth, environmental, and materials science fields. We applied this carbonate quantification method to a suite of Columbia River Basalt Group (CRBG) well cuttings recovered in 2009 from Pacific Northwest National Laboratory’s Wallula #1 Well. Our execution of this new combined calcite and calcite–corundum calibration curve TGA–MS method on our CRBG sample suite indicated average carbonate contents of 0.050 wt % in flow interiors (caprocks) and 0.400 wt % in interflow zones (reservoirs) in the upper 1250 m of the Wallula #1 Well. Finally, by advancing our knowledge of continental flood basalt-hosted carbonates in the mafic subsurface and reaching new TGA–MS quantification limits for carbonate minerals, we expand MRV capabilities and support the commercial-scale deployment of carbon mineralization projects in the Pacific Northwest United States and beyond.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Probing Carbon Mineralization Mechanisms in Pore and Bulk Fluids by Harnessing Architected Calcium Silicates

The ability to synthesize materials with well-controlled pore structures gives us unprecedented control over probing fluid interactions with reactive interfaces and advancing calibrated insights into coupled chemo-morphological interactions. One of the primary challenges in developing crystalline silicate materials lies in achieving ordered pore structures. Existing approaches of producing amorphous mesoporous metal silicates via sol–gel methods and heat-treatment of these materials to produce crystalline phases cause the pore structures in the amorphous phases to collapse. To overcome this challenge, carbon coating of amorphous mesoporous calcium silicate particles is carried out to retain the pore structure, while the material is heated to produce crystalline calcium silicate with calcium sulfate inclusions. The pore diameter in these materials is about 3.9 nm, with a surface area and a pore volume of 28.75 m 2 /g and 0.092 cm 2 /g, respectively. The mechanisms of carbon mineralization are investigated by reacting architected calcium silicate with 1 M Na 2 CO 3 and monitoring the evolution in the structural phases using operando wide-angle X-ray scattering (WAXS) measurements. Formation of stable calcium carbonate polymorph or calcite and metastable calcium carbonate polymorph or vaterite in pore and bulk fluids, respectively, resulting from the reaction between Na 2 CO 3 and CaSiO 3 , are noted. The mechanisms associated with carbon mineralization are delineated using ReaxFF molecular dynamics (MD) simulations. The surface dissolution reaction is initiated by 2H + ions that replace a Ca 2+ ion in the Ca–silicate matrix. Ca 2+ ions in the solution initially react with water to form calcium hydroxide and eventually form calcium (bi)carbonate. A slow and gradual increase in the formation of sodium silicate in the solution resulting from the reactions of silicic acid or the silicon dioxide reaction with sodium hydroxide is noted. When carbon mineralization occurs in environments bearing interfacial fluids, calcite is the dominant calcium carbonate polymorph, as determined using experiments with pore fluids and molecular-scale simulations. In conclusion, these studies provide fundamental insights into the mechanisms underlying the carbon mineralization of calcium silicate informed by experiments and molecular-scale simulations.

Calcium↗

Exotic Carbonate Mineralization Recovered from a Deep Basalt Carbon Storage Demonstration

Mitigating climate change require transformational advances for carbon dioxide removal, including geologic carbon sequestration in reactive subsurface environments. The Wallula Basalt Carbon Storage Pilot Project demonstrated that CO 2 injected into >800 m deep Columbia River Basalt Group flow top reservoirs mineralizes on month-year timescales. Herein, we present new optical petrography, micro-computed X-ray tomography, and electron microscopy results sidewall cores collected two years after CO 2 injection. As no other anthropogenic carbonates from geologic carbon storage field studies have been recovered, this world-unique sample suite provides unparalleled insight for subsurface carbon mineralization products and paragenesis. Chemically-zoned nodules with Ca/Mn-rich cores and Fe-dominant outer rims are prominent examples of the neoformed carbonate assemblages with ankerite-siderite compositions and exotic divalent cation correlations. Further, paragenetic insights for the timing of aragonite, silica, and fibrous zeolites are clarified based on mineral texture and spatial relationships, along with time-resolved downhole fluid sampling. Collectively, these results clarify the mineralogy, chemistry, and paragenesis of carbon mineralization, providing insight into the ultimate fate and transport of CO 2 in reactive mafic-ultramafic reservoirs

54 ENVIRONMENTAL SCIENCES↗

Coke gasification: the influence and behavior of inherent catalytic mineral matter

Gasification of coke contributes to its degradation in the blast furnace. In this study, the effect of gasification on the inherent catalytic minerals in cokes and their reciprocal influence on gasification are investigated. The catalytic mineral phases identified in the cokes used in this study were metallic iron, iron sulfides, and iron oxides. Metallic iron and pyrrhotite were rapidly oxidized during gasification to iron oxide. The catalysts had a strong influence on the apparent rates at the initial stages of reaction. As gasification proceeds, their effect on the reaction rate diminishes as a result of reducing the surface contact between catalyst and carbon matrix because of carbon consumption around the catalyst particles; with extended burnout the reactivity of the coke becomes increasingly dependent on surface area. The reaction rate in the initial stages was also influenced by the particle size of the catalytic minerals; for a given catalytic iron level, the cokes whose catalytic minerals were more finely dispersed had a higher apparent reaction rate than cokes containing larger catalytic particles. Iron, sodium, and potassium in the amorphous phase did not appear to affect the reaction rate. 40 refs., 16 figs., 6 tabs.

01 COAL, LIGNITE, AND PEAT↗

Inhibition Effect of Secondary Phosphate Mineral Precipitation on Uranium Release from Contaminated Sediments

The inhibitory effect of phosphate mineral precipitation on uranium release was evaluated using a U(VI)-contaminated sediment collected from the US Department of Energy (DOE) Hanford site. The sediment contained U(VI) that was associated with diffusion-limited intragrain regions within its mm-size granitic lithic fragments. The sediment was first treated to promote phosphate mineral precipitation in batch suspensions spiked with 1 and 50 mM aqueous phosphate, and calcium in a stoichiometric ratio of mineral hydroxyapatite. The phosphate-treated sediment was then leached to solubilize contaminant U(VI) in a column system using a synthetic groundwater that contained chemical components representative of Hanford groundwater. Phosphate treatment significantly decreased the extent of U(VI) release from the sediment. Within the experimental duration of about 200 pore volumes, the effluent U(VI) concentrations were consistently lower by over one and two orders of magnitude after the sediment was treated with 1 and 50 mM of phosphate, respectively. Measurements of solid phase U(VI) using various spectroscopes and chemical extraction of the sediment collectively indicated that the inhibition of U(VI) release from the sediment was caused by: 1) U(VI) adsorption to the secondary phosphate precipitates and 2) the transformation of initially present U(VI) mineral phases to less soluble forms.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Pore‐Scale Modeling of Reactive Transport with Coupled Mineral Dissolution and Precipitation

Abstract We present a new pore‐scale model for multicomponent advective‐diffusive transport with coupled mineral dissolution and precipitation. Both dissolution and precipitation are captured simultaneously by introducing a phase transformation vector field representing the direction and magnitude of the overall phase change. An effective viscosity model is adopted in simulating fluid flow during mineral dissolution‐precipitation that can accurately capture the velocity field without introducing any empirical parameters. The proposed approach is validated against analytical solutions and interface tracking simulations in simplified structures. After validation, the proposed approach is employed in modeling realistic rocks where mineral dissolution and precipitation are dominant at different locations. We have identified three regimes for mineral dissolution‐precipitation coupling: (a) compact dissolution‐precipitation where dissolution is dominant near the inlet and precipitation is dominant near the outlet, (b) wormhole dissolution with clustered precipitation where dissolution generates wormholes in the main flow paths and precipitation clogs the secondary flow paths, and (c) dissolution dominant where all solid grains are gradually dissolved. In the three regimes, the proposed approach provides reliable porosity‐permeability relationships that cannot be described well by traditional macroscale models. We find that the permeability can increase while the overall porosity decreases when the main flow paths are expanded by dissolution and adjacent pore spaces are clogged by precipitation.

58 GEOSCIENCES↗

Integrated low carbon H 2 conversion with in situ carbon mineralization from aqueous biomass oxygenate precursors by tuning reactive multiphase chemical interactions

Meeting our rising demand for clean energy carriers such as H 2 from renewable biomass resources is challenged by the co-emission of CO 2 and CH 4 . To address this challenge, we design novel reactive separation pathways that integrate multiphase chemical reactions by harnessing Ca and Mg bearing minerals as a sorbent to capture CO 2 released during the hydrothermal deconstruction of aqueous biomass oxygenates to produce H 2 and solid carbonates via low temperature aqueous phase reforming and thermodynamically downhill carbon mineralization. Earth abundant catalysts such as Ni/Al 2 O 3 are effective in producing H 2 yields as high as 79% and 74% using ethylene glycol and methanol in the presence of Ca(OH) 2 as an alkaline sorbent, without contaminating or deactivating the catalyst. H 2 yields with in situ carbon mineralization using a Ni or Pt/Al 2 O 3 catalyst are enhanced based on the following order of reactivity: acetate < glycerol < methanol < formate < ethylene glycol. These studies demonstrate that the multiphase chemical interactions can be successfully tuned to enhance H 2 yields through the selective cleavage of C–C bonds using Ni/Al 2 O 3 catalysts to deconstruct biomass oxygenates for producing H 2 and CO 2 , and in situ carbon mineralization by harnessing abundant alkaline materials, as demonstrated using ladle slag. This approach unlocks new scientific possibilities for harnessing multiple emissions including abundant organic-rich wastewater streams and alkaline industrial residues to co-produce low carbon H 2 and carbonate-bearing materials for use in construction by using renewable solar thermal energy resources.

09 BIOMASS FUELS↗

Structure and chemical characteristics of natural mineral deposit Terbunskaya (Lipetsk region, Russia)

New knowledge about the mineralogical features Terbunsky mineral. Investigated 5 fractions isolated from the incision (2-2,5 m). Terbunskaya deposit belongs to minerals Santonian age. Scanning electron microscopy and energy dispersive analysis of fractions isolated studied in detail. In the coarse fractions found ancient organic remains of algae and micro-organisms that have been sedimented together with the mineral component during geological periods. The share of organic inclusions does not exceed 1.5%. Chemical composition confirms the presence of silicon and carbonate organisms. Advantageously proportion of minerals having a layered structure with a plurality of micro and nano pore size 600 - 80-nm and an average chemical composition (wt%): Na (0,64), Mg (0,54), Al (13.48), Si (27 57), K (2.39) Ca (0.75)

58 GEOSCIENCES↗

Evolutionary selection of enzymatically synthesized semiconductors from biomimetic mineralization vesicles

The way nature evolves and sculpts materials using proteins inspires new approaches to materials engineering but is still not completely understood. Here, we present a cell-free synthetic biological platform to advance studies of biologically synthesized solid-state materials. This platform is capable of simultaneously exerting many of the hierarchical levels of control found in natural biomineralization, including genetic, chemical, spatial, structural, and morphological control, while supporting the evolutionary selection of new mineralizing proteins and the corresponding genetically encoded materials that they produce. DNA-directed protein expression and enzymatic mineralization occur on polystyrene microbeads in water-in-oil emulsions, yielding synthetic surrogates of biomineralizing cells that are then screened by flow sorting, with light-scattering signals used to sort the resulting mineralized composites differentially. We demonstrate the utility of this platform by evolutionarily selecting newly identified silicateins, biomineralizing enzymes previously identified from the silica skeleton of a marine sponge, for enzyme variants capable of synthesizing silicon dioxide (silica) or titanium dioxide (titania) composites. Mineral composites of intermediate strength are preferentially selected to remain intact for identification during cell sorting, and then to collapse postsorting to expose the encoding genes for enzymatic DNA amplification. Some of the newly selected silicatein variants catalyze the formation of crystalline silicates, whereas the parent silicateins lack this ability. The demonstrated bioengineered route to previously undescribed materials introduces in vitro enzyme selection as a viable strategy for mimicking genetic evolution of materials as it occurs in nature.

59 BASIC BIOLOGICAL SCIENCES↗

Freeze-induced crystallization: An overlooked pathway for mineral genesis in natural waters

Natural ice plays salient roles in making the Earth habitable and sustainable. Previously overlooked, its role in chemical processes is now of emerging interest, particularly due to the freeze concentration effect, which can substantially promote chemical reactions during ice formation. We demonstrate here that ice formation can serve as a dynamic and unique pathway for mineral genesis. Freezing solutions containing dissolved manganese and carbonates produced rhodochrosite (Mn II CO 3 ) even under slightly undersaturated conditions. At room temperature, by contrast, this occurred when the solution saturation level was increased by ca. 30,000 times. The cryogenic rhodochrosite formed spherical aggregates of nano-polycrystallites, distinctly different from the cubic monocrystalline particles observed at room temperature. The distinct feature likely resulted from the combined effects of the intensified supersaturation induced by the freeze concentration effect and the low temperatures within liquid-like layers, conditions that make liquid-like layers an exceptional environment for mineral genesis, unlike typical natural water systems. The cryogenic rhodochrosite formation was successfully demonstrated using in situ, real-time X-ray absorption spectroscopy (XAS), enabling direct observation of freeze-induced solid formation. In conclusion, our findings reveal that freeze-induced crystallization may be an active mineralization pathway, potentially influencing elemental cycles within the cryosphere and contributing to minerals with distinguishing properties and reactivities in the environment.

Earth, Atmospheric, and Planetary Sciences↗

New Data on Isomorphism in Eudialyte-Group Minerals. I. Crystal Structure of Titanium-Rich Eudialyte from the Kovdor Alkaline Massif

An abnormally titanium-rich mineral of the eudialyte group was studied by IR spectroscopy and X-ray diffraction. The trigonal unit cell parameters are a = 14.165(1) Å, c = 30.600(5) Å, V = 5317.23(4) Å{sup 3}, sp. gr. R3m. The crystal structure was refined to R = 0.034 with anisotropic displacement parameters using 2530 reflections with F > 3σ(F). The idealized formula of the mineral (Z = 3) is Na{sub 8}(H{sub 3}O){sub 5}(K,Ce,Sr){sub 2}Ca{sub 6}Zr{sub 2}Ti{sub 1.2}(Fe,Mn){sub 0.6}Si{sub 26}O{sub 72}(OH){sub 2}Cl · 4H{sub 2}O. At the ratio Zr: Ti ~ 2: 1, titanium atoms lie in four sites and are not predominant in any of them. Another distinguishing feature of the mineral is the structural separation of chemical elements, such that K, Sr, and Ce cations and H{sub 3}O groups are randomly distributed between four split sites to form polyhedra with different volumes. The isomorphism of Zr and Ti in eudialyte-group minerals is discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Bioinspired mineralizing microenvironments generated by liquid-liquid phase coexistence

Biominerals such as bones, teeth and shells exhibit improved mechanical properties and intricate morphologies not seen in nonbiologically-produced minerals of ostensibly the same composition. These remarkable properties of biogenic minerals are thought to arise due to precise local control over the mineral deposition process, including organic and inorganic inclusions. Understanding how Biology controls the local reaction environment during formation of these materials to control their composition, structure, and properties is a grand challenge that promises to enable new routes to high-performance materials. This project developed multi-compartment bioinspired microreactors as artificial mineralizing vesicles, and used them to understand and control formation of inorganic/organic composite solid materials. A major emphasis was on developing all-aqueous emulsions in which each droplet was a structured microreactor with two or more adjacent phases. This approach provided local control over reaction environment including availability of inclusions such as polypeptides and metal ions, while being sufficiently simple to produce large populations of essentially identical multiphase reactor droplets simultaneously within a batch. Organic/inorganic composite materials could be produced with very high organic content that stabilized the inorganic portions as amorphous materials (e.g., amorphous calcium carbonate) by preventing the typical conversion to more thermodynamically crystalline forms (e.g., calcite). These stabilized amorphous composites could be stored indefinitely and converted to crystalline forms later by removal of the organic inclusions via, for example, heating. Compositional gradients in the organic and inorganic components were embedded during synthesis due to the evolution of the reaction microenvironment, and despite the complexity of this process it occurred similarly across the population of reactive droplets and was hence encoded into the population of resulting composite particles. The approach developed here allows pre-structuring of reactive microenvironments to control the spatiotemporal reaction environment, which is an important step towards rational design and on-demand production of complex functional materials with desired composition, optical properties, and mechanical response.

36 MATERIALS SCIENCE↗

Effects of Mineral Impurities and Heat on Uranium(VI) Sorption onto Bentonite (Final Report)

Most nuclear waste disposal options include compacted bentonite, consisting of montmorillonite clay, as part of a barrier system to minimize contaminant mobility. Uranium (U) is the primary element in spent nuclear fuel, and from an environmental perspective, a potential contaminant of water resources. Furthermore, uranium may control nuclear fuel degradation rates and the consequent release of other radioactive contaminants based on its diffusive transport away from waste canisters. Uranium sorption onto clay and other mineral surfaces is expected to limit U(VI) mobility in these systems. However, at this point a prediction of U(VI) sorption and transport behavior in performance assessment (PA) models is complicated by a series of factors, such as: (1) the presence of various U(VI) solution species with different charges and sorption characteristics; (2) the complex microstructure of montmorillonite clay resulting in two types of clay porosities and multiple sorption sites; (3) the largely unknown effects of bentonite mineral impurities on pore water chemistry, U(VI) sorption and diffusion behavior; and (4) the potential impacts of heat, generated by the decay of spent fuel, on mineralogical and microstructural transformations, and any subsequent effects on radionuclide sorption and mobility. In this project, we investigated the effects of calcite impurities on U(VI) sorption and diffusion onto montmorillonite before and after mineral exposure to heat. Overall, our main goals were to: 1. Gain a mechanistic understanding of the effects of calcite impurities on U(VI) sorption and diffusion in montmorillonite/bentonite at variable chemical conditions, and before and after mineral exposure to heat; and to 2. Work towards the development of new surface complexation and diffusion models to predict U(VI) sorption and mobility in montmorillonite/bentonite while accounting for the impacts of calcite impurities and heat. In order to achieve these goals, we pursued the following research objectives and tasks: 1. Characterize the effects of calcite impurities on U(VI) sorption onto Na-montmorillonite, and evaluate if and how these effects change due to solids’ exposure to heat (Task 1). 2. Characterize U(VI) surface speciation in solid samples from Task 1, with a particular focus on U(VI) precipitates and co-precipitates (Task 2). 3. Test the relevance of observed changes in U(VI) sorption characteristics for U(VI) diffusive transport behavior in bentonite barriers (Task 3). 4. Evaluate the exclusion of anionic U(VI) solution complexes from clay nanopores (Task 4). 5. Building on Tasks 1-4, start the development of new surface complexation and reactive transport models that can simulate and predict U(VI) sorption and diffusion in complex bentonite systems (Task 5). A detailed description of all tasks, and their specific results and conclusions is provided in this report.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Iron transformation pathways and redox micro-environments in seafloor sulfide-mineral deposits: Spatially resolved Fe XAS and δ 57/54 Fe observations

Hydrothermal sulfide chimneys located along the global system of oceanic spreading centers are habitats for microbial life during active venting. Hydrothermally extinct, or inactive, sulfide deposits also host microbial communities at globally distributed sites. The main goal of this study is to describe Fe transformation pathways, through precipitation and oxidation-reduction (redox) reactions, and examine transformation products for signatures of biological activity using Fe mineralogy and stable isotope approaches. The study includes active and inactive sulfides from the East Pacific Rise 9°50'N vent field. First, the mineralogy of Fe(III)-bearing precipitates is investigated using microprobe X-ray absorption spectroscopy (μXAS) and X-ray diffraction (μXRD). Second, laser-ablation (LA) and micro-drilling (MD) are used to obtain spatially-resolved Fe stable isotope analysis by multicollector-inductively coupled plasma-mass spectrometry (MC-ICP-MS). Eight Fe-bearing minerals representing three mineralogical classes are present in the samples: oxyhydroxides, secondary phyllosilicates, and sulfides. For Fe oxyhydroxides within chimney walls and layers of Si-rich material, enrichments in both heavy and light Fe isotopes relative to pyrite are observed, yielding a range of δ 57 Fe values up to 6‰. Overall, several pathways for Fe transformation are observed. Pathway 1 is characterized by precipitation of primary sulfide minerals from Fe(II)aq-rich fluids in zones of mixing between vent fluids and seawater. Pathway 2 is also consistent with zones of mixing but involves precipitation of sulfide minerals from Fe(II)aq generated by Fe(III) reduction. Pathway 3 is direct oxidation of Fe(II) aq from hydrothermal fluids to form Fe(III) precipitates. Finally, Pathway 4 involves oxidative alteration of pre-existing sulfide minerals to form Fe(III). The Fe mineralogy and isotope data do not support or refute a unique biological role in sulfide alteration. The findings reveal a dynamic range of Fe transformation pathways consistent with a continuum of micro-environments having variable redox conditions. Lastly, these micro-environments likely support redox cycling of Fe and S and are consistent with culture-dependent and -independent assessments of microbial physiology and genetic diversity of hydrothermal sulfide deposits.

mineral alteration↗

Global changes in mineral transporters in tetraploid switchgrasses ( Panicum virgatum L.)

Switchgrass (Panicum virgatum L) is perennial, C4 grass with great potential as a biofuel crop. An in-depth understanding of the mechanisms that control mineral uptake, distribution and remobilization will benefit sustainable production. Nutrients are mobilized from aerial portions to below-ground crowns and rhizomes as a natural accompaniment to above-ground senescence post seed-set. Mineral uptake and remobilization is dependent on transporters, however, little if any information is available about the specific transporters that are needed and how their relative expression changes over a growing season. Using well-defined classes of mineral transporters, we identified 520 genes belonging to 40 different transporter classes in the tetraploid switchgrass genome. Expression patterns were determined for many of these genes using publically available transcriptomic datasets obtained from both greenhouse and field grown plants. Certain transporters showed strong temporal patterns of expression in distinct developmental stages of the plant. Gene-expression was verified for selected transporters using qRT-PCR. By and large these analyses confirmed the developmental stage-specific expression of these genes. Mineral analyses indicated that K, Fe, Mg, Co, and As had a similar pattern of accumulation with apparent limited remobilization at the end of the growing season. These initial analyses will serve as a foundation for more detailed examination of the nutrient biology of switchgrass.

switchgrass↗

Pore-Scale Modeling of Mineral Growth and Nucleation in Reactive Flow

A fundamental understanding of mineral precipitation kinetics relies largely on microscopic observations of the dynamics of mineral surfaces exposed to supersaturated solutions. Deconvolution of tightly bound transport, surface reaction, and crystal nucleation phenomena still remains one of the main challenges. Particularly, the influence of these processes on texture and morphology of mineral precipitate remains unclear. This study presents a coupling of pore-scale reactive transport modeling with the Arbitrary Lagrangian-Eulerian approach for tracking evolution of explicit solid interface during mineral precipitation. It incorporates a heterogeneous nucleation mechanism according to Classical Nucleation Theory which can be turned “on” or “off.” This approach allows us to demonstrate the role of nucleation on precipitate texture with a focus at micrometer scale. In this work precipitate formation is modeled on a 10 micrometer radius particle in reactive flow. The evolution of explicit interface accounts for the surface curvature which is crucial at this scale in the regime of emerging instabilities. The results illustrate how the surface reaction and reactive fluid flow affect the shape of precipitate on a solid particle. It is shown that nucleation promotes the formation of irregularly shaped precipitate and diminishes the effect of the flow on the asymmetry of precipitation around the particle. The observed differences in precipitate structure are expected to be an important benchmark for reaction-driven precipitation in natural environments.

58 GEOSCIENCES↗