Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MICROWAVES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29

High power microwave source with a three dimensional printed metamaterial slow-wave structure

For over the last decade, the concept of metamaterials has led to new approaches for considering the interaction of radiation with complex structures. However, practical manifestations of such a device operating at high power densities have proven difficult to achieve due to the resonant nature of metamaterials and the resultant high electric fields, which place severe constraints on manufacturing the slow wave structures. In this paper, we describe the first experimental manifestation of a high power microwave device utilizing a metallic slow wave structure (metamaterial-like) fabricated using additive manufacturing. The feasibility of utilizing additive manufacturing as a technique for building these relatively complicated structures has thus been demonstrated. The MW class microwave source operates in the C-band and shows frequency tunablility with electron beam voltage. The basic electromagnetic characteristics of this device, the construction using additive manufacturing, and the basic performance as a microwave oscillator are considered. Due to the tunable nature of the device, it shows promise not only as an oscillator but also as a microwave amplifier. Therefore, the dispersive characteristics and a discussion of the anticipated gain is included as it relates to an amplifier configuration.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Development of a microwave-assisted downdraft moving-bed gasifier for continuous processing of lignite and biomass chars

This research illustrates a microwave-assisted downdraft moving-bed gasifier for the first time. Such design enables continuous solid gasification process. An adjustable auger was applied to control the solid removal rate and the gas-solid interaction time. Both lignite and biomass chars were investigated to determine the capability of the current system for low-tar feedstocks with different densities. Here, the presented reactor design was able to operate continuously for 3 hours and 20 minutes under 700 ℃ and atmospheric pressure, with air as the gasifying agent. For yellow pine char, the processing rate could reach 34.1 grams per hour with decent syngas production. The downdraft moving-bed design shows better cold gas and syngas production efficiencies compared to the common fixed-bed design, due to controllable residence time and more homogeneous microwave heating. The limitations of the current design and the direction of novel microwave-assisted chemical reactor design were discussed. This novel reactor design provides a way to improve the efficiency of microwave-assisted gasification process and shows its potential to be incorporated into other established chemical reaction processes as a modular add-on.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

MICROWAVE BURSTS WITH FINE STRUCTURES IN THE DECAY PHASE OF A SOLAR FLARE

This paper presents the microwave bursts with fine structures (FSs) at 1.10-1.34 GHz in the decay phase of a solar flare observed by the Chinese Solar Broadband Radio Spectrometer in Huairou, which show a peak-to-peak correlation with 25-50 keV hard X-ray (HXR) bursts observed by RHESSI. In the microwave spectra, we have identified stripe-like bursts such as lace bursts, fiber structures, zebra patterns (ZPs), and quasi-periodic pulsations. We also have detected short narrowband bursts such as dots, type III, and spikes. The lace bursts had rarely been reported, but in this event they are observed to occur frequently in the decay phase of the flare. The similarity between 25 and 50 keV HXR light curve and microwave time profiles at 1.10-1.34 GHz suggests that these microwave FSs are related to the properties of electron acceleration. The electron velocity inferred from the frequency drift rates in short narrowband bursts is in the range of 0.13c-0.53c and the corresponding energy is about 10-85 keV, which is close to the energy of HXR-emitting electrons. From the Alfven soliton model of fiber structures, the double plasma resonance model of ZPs, and the Bernstein model of the lace bursts, we derived a similar magnetic field strength in the range of 60-70 G. Additionally, the physical conditions of the source regions such as height, width, and velocity are estimated.

79 ASTRONOMY AND ASTROPHYSICS↗

Self-Generation of Chaotic Microwave Signal in Spin Wave Optoelectronic Generator

Abstract—The self-generation of a chaotic microwave signal in a spin-wave optoelectronic generator has been experimentally investigated for the first time. The generator was a ring circuit, in the microwave path of which there was a spin-wave delay line on the film of an yttrium iron garnet (YIG) and a microwave amplifier. The optical path contained a fiber optic delay line. The nonlinear element of the generator was a film of YIG, which worked under the conditions of four-wave parametric interaction of spin waves. It has been shown that it is possible to generate monochromatic, periodic, quasi-periodic, and chaotic microwave signals by controlling the gain coefficient of the ring. The parameters characterizing the chaotic signal that are generated by the ring have been determined.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Double-coronal X-Ray and Microwave Sources Associated with a Magnetic Breakout Solar Eruption

Double-coronal hard X-ray (HXR) sources are believed to be critical observational evidence of bi-directional energy release through magnetic reconnection in large-scale current sheets in solar flares. Here, we present a study on double-coronal sources observed in both HXR and microwave regimes, revealing new characteristics distinct from earlier reports. This event is associated with a footpoint-occulted X1.3-class flare (2014 April 25, starting at 00:17 UT) and a coronal mass ejection that were likely triggered by the magnetic breakout process, with the lower source extending upward from the top of the partially occulted flare loops and the upper source co-incident with rapidly squeezing-in side lobes (at a speed of ∼250 km s{sup −1} on both sides). The upper source can be identified at energies as high as 70–100 keV. The X-ray upper source is characterized by flux curves that differ from those of the lower source, a weak energy dependence of projected centroid altitude above 20 keV, a shorter duration, and an HXR photon spectrum slightly harder than those of the lower source. In addition, the microwave emission at 34 GHz also exhibits a similar double-source structure and the microwave spectra at both sources are in line with gyrosynchrotron emission given by non-thermal energetic electrons. These observations, especially the co-incidence of the very-fast squeezing-in motion of side lobes and the upper source, indicate that the upper source is associated with (and possibly caused by) this fast motion of arcades. This sheds new light on the origin of the corona double-source structure observed in both HXRs and microwaves.

79 ASTRONOMY AND ASTROPHYSICS↗

Technology Development for a Hyperspectral Microwave Atmospheric Sounder (HyMAS)

The Hyperspectral Microwave Atmospheric Sounder (HyMAS) is being developed at Lincoln Laboratories and accommodated by the Goddard Space Flight Center for a flight opportunity on a NASA research aircraft. The term hyperspectral microwave is used to indicate an all-weather sounding instrument that performs equivalent to hyperspectral infrared sounders in clear air with vertical resolution of approximately 1 km. Deploying the HyMAS equipped scanhead with the existing Conical Scanning Microwave Imaging Radiometer (CoSMIR) shortens the path to a flight demonstration. Hyperspectral microwave is achieved through the use of independent RF antennas that sample the volume of the Earths atmosphere through various levels of frequencies, thereby producing a set of dense, spaced vertical weighting functions.

sounding↗

Development of a Permanent-Magnet Microwave Ion Source for a Sealed-Tube Neutron Generator

A microwave ion source has been designed and constructed for use with a sealed-tube, high-yield neutron generator. When operated with a tritium-deuterium gas mixture the generator will be capable of producing 5*1011 n/s in non-proliferation applications. Microwave ion sources are well suited for such a device because they can produce high extracted beam currents with a high atomic fraction at low gas pressures of 0.2-0.3 Pa required for sealed tube operation. The magnetic field strength for achieving electron cyclotron resonance (ECR) condition, 87.5 mT at 2.45 GHz microwave frequency, was generated and shaped with permanent magnets surrounding the plasma chamber and a ferromagnetic plasma electrode. This approach resulted in a compact ion source that matches the neutron generator requirements. The needed proton-equivalent extracted beam current density of 40 mA/cm^2 was obtained at moderate microwave power levels of 400 W. Results on magnetic field design, pressure dependency and atomic fraction measured for different wall materials are presented.

43 PARTICLE ACCELERATORS↗

Tunable Microwave Conductance of Nanodomains in Ferroelectric PbZr 0.2 Ti 0.8 O 3 Thin Film

Ferroelectric materials exhibit spontaneous polarization that can be switched by electric field. Beyond traditional applications as nonvolatile capacitive elements, the interplay between polarization and electronic transport in ferroelectric thin films has enabled a path to neuromorphic device applications involving resistive switching. A fundamental challenge, however, is that finite electronic conductivity may introduce considerable power dissipation and perhaps destabilize ferroelectricity itself. In this work, tunable microwave frequency electronic response of domain walls injected into ferroelectric lead zirconate titanate (PbZr 0.2 Ti 0.8 O 3 ) on the level of a single nanodomain is revealed. Tunable microwave response is detected through first-order reversal curve spectroscopy combined with scanning microwave impedance microscopy measurements taken near 3 GHz. Contributions of film interfaces to the measured AC conduction through subtractive milling, where the film exhibited improved conduction properties after removal of surface layers, are investigated. Using statistical analysis and finite element modeling, we inferred that the mechanism of tunable microwave conductance is the variable area of the domain wall in the switching volume. These observations open the possibilities for ferroelectric memristors or volatile resistive switches, localized to several tens of nanometers and operating according to well-defined dynamics under an applied field.

36 MATERIALS SCIENCE↗

Microwave Multiplexing on the Keck Array

In this paper, we describe an on-sky demonstration of a microwave-multiplexing readout system in one of the receivers of the Keck Array, a polarimetry experiment observing the cosmic microwave background at the South Pole. During the austral summer of 2018–2019, we replaced the time-division multiplexing readout system with microwave-multiplexing components including superconducting microwave resonators coupled to radio frequency superconducting quantum interference devices at the sub-Kelvin focal plane, coaxial-cable plumbing and amplification between room temperature and the cold stages, and a SLAC Microresonator Radio Frequency system for the warm electronics. In the range 5–6 GHz, a single coaxial cable reads out 528 channels. The readout system is coupled to transition-edge sensors, which are in turn coupled to 150-GHz slot-dipole phased-array antennas. Observations began in April 2019, and we report here on an initial characterization of the system performance.

79 ASTRONOMY AND ASTROPHYSICS↗

Structural, Magnetic, and Dielectric Properties of Conventional- and Microwave-Sintered Ni{sub 0.6}Zn{sub 0.4−x}Cu{sub x}Fe{sub 2}O{sub 4}

In the present work, structural, magnetic, and dielectric properties of conventional- and microwave-sintered Ni{sub 0.6}Zn{sub 0.4-x}Cu{sub x}Fe{sub 2}O{sub 4} (x = 0.0 to 0.4 in steps of 0.1) are studied. X-ray diffraction measurements confirm the formation of a single spinel phase. Crystallite size estimated from Scherrer’s method found between 30–41 nm and 36–28.5 nm in conventional- and microwave-sintered samples respectively. The lattice constant decreases with Cu substitution, suggesting the incorporation of Cu into the spinel lattice. SEM images reveal that microwave sintering results in larger grains with intragranular pores. Saturation magnetization was found to decrease with Cu content. Cation distribution estimated from the magnetization data supports the observed changes in magnetic parameters. A significant influence on microstructure and cation redistribution on dielectric properties are observed for microwave-sintered samples.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Entanglement concentration and purification of two-mode squeezed microwave photons in circuit QED

We present a theoretical proposal for a physical implementation of entanglement concentration and purification protocols for two-mode squeezed microwave photons in circuit quantum electrodynamics (QED). First, we give the description of the cross-Kerr effect induced between two resonators in circuit QED. Then we use the cross-Kerr media to design the effective quantum nondemolition (QND) measurement on microwave-photon number. By using the QND measurement, the parties in quantum communication can accomplish the entanglement concentration and purification of nonlocal two-mode squeezed microwave photons. We discuss the feasibility of our schemes by giving the detailed parameters which can be realized with current experimental technology. Our work can improve some practical applications in continuous-variable microwave-based quantum information processing.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Kinetic study of Ni-M/CNT catalyst in methane decomposition under microwave irradiation

Methane catalytic decomposition has been studied with catalysts that can attenuate the energy of electromagnetic waves to heat and drive the reaction. Herein, we report, for the first time, a comprehensive kinetic study of Ni-M (M=Pd, Cu, or Fe)-CNT catalysts under microwave irradiation. These binary metal alloy nanoparticles have been synthesized on multiwalled carbon nanotube support with solvothermal process. These catalysts showed incredible performance for both absorbing microwave energy and catalyzing the reaction to form carbon nanotubes and hydrogen. Ni-M-CNT has a reaction order of 0.74. 10Ni-1 Pd-CNT, 10Ni-1Cu-CNT, and 10Ni-1Fe-CNT have activation energies at 87, 75, and 69 kJ/mol. The investigation was carried out in a differential reactor. The results indicated that 10Ni-1Fe-CNT had the lowest activation energy due to the increase in microwave susceptibility. Here, this work pioneered the microwave catalytic methane decomposition field as well as paving the way for future electrification of CO x -free hydrogen production.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Oxidative ethane dehydrogenation under thermal vs. microwave heating over Ga/ZSM-5 and GaPt/ZSM-5

Conventional thermal heating versus microwave heating for the oxidative dehydrogenation of ethane with CO 2 as the oxidative co-reactant over 2%Ga/ZSM-5 and 1.5%Ga0.5%Pt/ZSM-5. The Ga/ZSM-5 and GaPt/ZSM-5 had a similar ethane conversion under microwave heating at 450 °C, compared to the thermally heated catalyst at 650 °C. The bimetallic GaPt/ZSM-5 performed better than the Ga/ZSM-5. Both the GaPtMWFB-450 °C and GaMWFB-450 °C resulted in a lower production rate to carbon monoxide and water than the TFB-650 °C, suggesting that the microwave heating is less favorable to the water gas shift reaction. In this study, microwave heating increased the catalytic conversion of ethane and selectivity to ethylene.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Microwave-driven synthesis and modification of nanocarbons and hybrids in liquid and solid phases

Over the past 20 years, nanocarbons have become more significant as nanostructured fillers in composites and, more recently, as functional elements in a brand-new class of hybrid materials. Microwave-assisted synthesis and processing is a burgeoning subject matter in materials research with significant strides in the realm of nanocarbon during the last decade. Here, the review examines recent approaches to producing various nanocarbons using microwaves as energy sources, the characterization of such materials for various applications, and their results. The underlying factors supporting the increased performance of such materials or their composites are analyzed and reaction mechanisms are presented wherever necessary. In particular, the recently developed and verified approaches to produce porous carbon materials, CNTs and fibers, carbon nanospheres, carbon dots, CQDs, reduced graphene oxide, nanocarbon hybrid materials, and the purification and modification of CNTs are discussed. The reduction of graphene oxide and the preparation of graphene derivative hybrids using solid-state and liquid-state routes such as polyopl, mixed solvents, ionic liquids, and microwave-assisted hydrothermal/solvothermal methods are analyzed in detail. In addition, the principles of microwave heating in liquid and solid states, the use of metals particles as arcing agents or catalysts, and carbonaceous materials as internal or external susceptors during synthesis and modifications are presented in detail.

25 ENERGY STORAGE↗

Perovskite design principles for efficient microwave dry reforming with noble metal free catalysts

Microwave absorbing catalysts have the potential to electrify high-temperature thermal reactions such as the dry reforming of methane process (DRM: CO 2 + CH 4 → 2CO + 2 H 2 ). However, microwave catalysts present unique challenges due to their dual requirements of maintaining microwave absorption in both oxidative and reductive environments and stability across a range of temperatures in inherently non-isothermal reactors. Here, catalyst candidates from the La 0.8 Sr 0.2 CoO 3 -La 0.8 Sr 0.2 NiO 3 -La 0.8 Sr 0.2 MnO 3 perovskite systems were screened (28 total) to identify promising microwave catalysts free of noble metals for dry reforming methane. The best performing candidates met two main criteria. First, they occurred at crystal phase boundaries, giving rise to a pseudocubic perovskite structure. The combined use of Goldschmidt tolerance factor and octahedral tolerance factors appeared to be suitable for predicting pseudocubic perovskites. Second, they provided a balance of reducible metal sites with an irreducible metal oxide support. The best performing catalyst was found to exsolve Ni-Co alloy particles as active sites for the DRM reaction which offered superior resistance to coking for excellent reforming efficiency and stability.

42 ENGINEERING↗

Flash microwave synthesis and sintering of nanosized La{sub 0.75}Sr{sub 0.25}Cr{sub 0.93}Ru{sub 0.07}o{sub 3-{delta}} for fuel cell application

Perovskite-oxide nanocrystals of La{sub 0.75}Sr{sub 0.25}Cr{sub 0.93}Ru{sub 0.07}O{sub 3-{delta}} with a mean size around 10 nm were prepared by microwave flash synthesis. This reaction was performed in alcoholic solution using metallic salts, sodium ethoxide and microwave autoclave. The obtained powder was characterised after purification by energy dispersive X-ray analysis (EDX), X-ray powder diffraction (XRD), BET adsorption technique, photon correlation spectroscopy (PCS) and transmission electron microscopy (TEM). The results show that integrated perovskite-type phase and uniform particle size were obtained in the microwave treated samples. At last the synthesised powder was directly used in a sintering process. A porous solid, in accordance with the expected applications, was then obtained at low sintering temperature (1000 deg. C) without use of pore forming agent. - Graphical abstract: TEM photograph of La{sub 0.75}Sr{sub 0.25}Cr{sub 0.93}Ru{sub 0.07}O{sub 3-{delta}} obtained by microwave flash synthesis. This picture confirms the nanometric size of the ceramic particles.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Microwave absorption properties and infrared emissivities of ordered mesoporous C-TiO{sub 2} nanocomposites with crystalline framework

Ordered mesoporous C-TiO{sub 2} nanocomposites with crystalline framework were prepared by the evaporation-induced triconstituent co-assembly method. The products were characterized by XRD, TEM, N{sub 2} adsorption-desorption and TG. Their microwave absorption properties were investigated by mixing the product and epoxy resin. It is found that the peak with minimum reflection loss value moves to lower frequencies and the ordered mesoporous C-TiO{sub 2} nanocomposite possesses an excellent microwave absorbing property with the maximum reflection loss of -25.4 dB and the bandwidth lower than -10 dB is 6.6 GHz. The attenuation of microwave can be attributed to dielectric loss and their absorption mechanism is discussed in detail. The mesoporous C-TiO{sub 2} nanocomposites also exhibit a lower infrared emissivity in the wavelength from 8 to 14 {mu}m than that of TiO{sub 2}-free powder. -- Graphical abstract: Ordered mesoporous C-TiO{sub 2} nanocomposite with crystalline framework possess excellent microwave absorbing properties with the maximum reflection loss of -25.4 dB and the bandwidth lower than -10 dB is 6.6 GHz. Display Omitted

36 MATERIALS SCIENCE↗

Microwave-assisted hydrothermally grown epitaxial ZnO films on Left-Pointing-Angle-Bracket 1 1 1 Right-Pointing-Angle-Bracket MgAl{sub 2}O{sub 4} substrate

In this report, epitaxial ZnO films were grown on Left-Pointing-Angle-Bracket 1 1 1 Right-Pointing-Angle-Bracket MgAl{sub 2}O{sub 4} single crystal substrates using Microwave Assisted Hydrothermal (MAH) method with microwave radiation heating (2.45 GHz) at 90 Degree-Sign C in a short time (within 15 min). Scanning electron microscopy confirms that these films possess smooth surface morphology with fully coalesced grains. In addition, photoluminescence (PL) measurements exhibit strong ultraviolet emission at room temperature, indicating potential applications for short-wave light-emitting photonic devices. The PL properties were improved by a thermal annealing process without generating structural defects. Hall measurements after thermal treatment show the carrier concentration to be of the order of 10{sup 19} cm{sup -3} which is comparable to those grown by conventional solution methods. The MAH method will offer a rapid route to synthesize epitaxial ZnO films with good optical and electrical properties for various applications. - Graphical abstract: FESEM images showing the morphology and cross sectional view of ZnO films grown using microwave assisted hydrothermal method at 90 Degree-Sign C for 30 min. Highlights: Black-Right-Pointing-Pointer Microwave Assisted Hydrothermal (MAH) method was introduced to synthesize epitaxial ZnO films. Black-Right-Pointing-Pointer The films possess smooth surface morphology, fully coalesced grains with high optical properties. Black-Right-Pointing-Pointer It exhibit good electrical properties (carrier concentration 10{sup 19} cm{sup -3}, mobility 19 cm{sup 2}/Vs).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗