SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Using high resolution and high sensitivity IRAS data at 12 and 25 microns low mass stars were studied which have recently formed in the Ophiuchus, Corona Australis, and IC1396 dark clouds. The successful application of these techniques to the Rho Ophiuchi infrared cluster is briefly described. The status of research performed is also presented.
The study presents high spatial resolution data at 50 and 100 microns for seven young intermediate-mass stars with flat or rising spectral energy distributions. Five stars, namely, LkH-alpha 198, R Mon, CD -42 deg 11721, R CrA, and V645 Cyg, are resolved at 100 microns. The emission comes from spatially extended envelopes, with sizes varying between 0.025 and 0.4 pc. The wavelengths are optically thin at mid-IR and FIR wavelengths but become optically thick in the visual where the extinction amounts to 5-10 mag. In two cases, R CrA and V 645 Cyg, dust density distributions with steep density gradients are obtained, alpha is approximately equal to 2, while for LkH-alpha, R Mon, and CD -42 deg 11721, alpha is approximately equal to 0.5. Model fitting to the spectral energy distributions, combined with the constraints on the size of the emitting regions, indicates that inside the circumstellar envelopes a large fraction of the stellar radiation is already degraded to longer wavelengths.
We present high spatial resolution X-ray observations, photometry and spectroscopy of the two low mass, active stars proposed as optical counterparts to the extreme ultraviolet source 2RE J0241-525 (equal to EUVE J0241-530). It is confirmed that both stars, which are of types dK7e and dM3e and separated by 22 arcsecs, are sources of soft X-ray emission and exhibit substantial chromospheric activity. Radial velocity measurements indicate that the two components are physically associated and most probably single. The projected equatorial velocities are measured as (75 +/- 3) km/s and (11.7 +/- 0.7) km/s for the hotter and cooler components, respectively, and whilst the hotter component has a relatively high photospheric lithium abundance, log N(Li) equal to 1.5 +/- 0.2, we are unable to detect any lithium in the cooler star. Isochrone fitting to this 'mini-cluster' yields an age of (3-70) Myr and a distance of (19-60) pc. An empirical comparison of the lithium abundances with those for similar stars in young clusters and associations narrows this age range to (5-30) Myr and a corresponding distance of (26-50) pc. We conclude that this object is a nearby post T-Tauri system, but we cannot locate any possible birth site. It appears unlikely that the system can have been ejected from a nearby open cluster in a two or three body encounter.
Using micro-machined silicon technology, an ultra-sensitive miniature acce.,rometer can be constructed which meets the requirements for microgravity experiments in the space environment.Such an accelerometer will have a full scale sensitivity of 1C2 g a resolution of lC8 g, low cross axis sensitivity, and low temperature sensitivity. Mass of the device is approximately five grams and its footprint is 2 cm x 2 cm. Innovative features of the accelerometer, which are patented, are: electrostatic caging to withstand handling shock up to 150 g, in-situ calibration, in situ performance characterization, and both static and dynamic compensation. The transducer operates on a force balance principle wherein the displacement of the proof mass is monitored by measuring tunneling electron current flow between a conductive tip, and a fixed platen. The four major parts of the accelerometer are tip die, incorporating the tunneling tip and four field plates for controlling pitch and roll of the proof mass; two proof mass dies, attached to the surrounding frame by sets of four leg" springs; and a force plate die. The four parts are fuse-bonded into a complete assembly. External electrical connections are made at bond pads on the front surface of the force plate die. Materials and processes used in the construction of the transducer are compatible with volume production.
The relatively young technology of NanoSIMS is unlocking an exciting new level of information from organic matter in ancient sediments. We are using this technique to characterize Proterozoic organic material that is clearly biogenic as a guide for interpreting controversial organic structures in either terrestrial or extraterrestrial samples. NanoSIMS is secondary ion mass spectrometry for trace element and isotope analysis at sub-micron resolution. In 2005, Robert et al. [1] combined NanoSIMS element maps with optical microscopic imagery in an effort to develop a new method for assessing biogenicity of Precambrian structures. The ability of NanoSIMS to map simultaneously the distribution of organic elements with a 50 nm spatial resolution provides new biologic markers that could help define the timing of life s development on Earth. The current study corroborates the work of Robert et al. and builds on their study by using NanoSIMS to map C, N (as CN), S, Si and O of both excellently preserved microfossils and less well preserved, non-descript organics in Proterozoic chert from the ca. 0.8 Ga Bitter Springs Formation of Australia.
Modules containing multiple monolithic microwave integrated-circuit (MMIC) chips have been built as prototypes of transmitting/receiving (T/R) modules for millimeter-wavelength radar systems, including phased-array radar systems to be used for diverse purposes that could include guidance and avoidance of hazards for landing spacecraft, imaging systems for detecting hidden weapons, and hazard-avoidance systems for automobiles. Whereas prior landing radar systems have operated at frequencies around 35 GHz, the integrated circuits in this module operate in a frequency band centered at about 150 GHz. The higher frequency (and, hence, shorter wavelength), is expected to make it possible to obtain finer spatial resolution while also using smaller antennas and thereby reducing the sizes and masses of the affected systems.
Using an updated collision model, we conduct a suite of high-resolution N-body integrations to probe the relationship between giant planet mass and terrestrial planet formation and system architecture. We vary the mass of the planets that reside at Jupiter’s and Saturn’s orbit and examine the effects on the interior terrestrial system.We find that massive giant planets are more likely to eject material from the outer edge of the terrestrial disc and produce terrestrial planets that are on smaller, more circular orbits. We do not find a strong correlation between exterior giant planet mass and the number of Earth analogues (analogous in mass and semimajor axis) produced in the system. These results allow us to make predictions on the nature of terrestrial planets orbiting distant Sun-like star systems that harbour giant planet companions on long orbits – systems that will be a priority for NASA’s upcoming Wide-Field Infrared Survey Telescope (WFIRST) mission.
Distinguishing planetary formation and evolution pathways and understanding the origins of volatiles on planetary bodies requires determination of relative abundances and isotope ratios in the noble gases, and also of the isotope ratios in C, H, N, O and S at high precisions. Traditional planetary mass spectrometers uniquely provide excellent survey capability including the noble gas relative abundances and their isotope ratios. However, to distinguish planetary evolution models for the outer planets, stable isotope ratios in C and O require precisions of ∼10 or better, readily achievable with a tunable laser spectrometer (TLS). As demonstrated on the Mars Curiosity rover, and as planned for a now-selected NASA Venus mission, tunable laser spectrometers play a unique role synergistic with the capabilities of planetary mass spectrometers. The TLS technique of recording infrared absorption spectra at ultrahigh resolution (resolving power λ/δλ ∼ 5 million) provides unambiguous detection of a wide variety of gases such as H2O, H2O2, H2CO, HOCl, NO, NO2, HNO3, N2O, O3, CO, CO2, NH3, N2H4, PH3, H2S, SO2, OCS, HCl, HF, O2, HCN, and CH4, C2H2, C2H4, C2H6 at parts-per-billion levels. Through line-depth or line-area ratio comparisons of adjacent spectral lines, planetary TLS instruments can achieve isotope ratio measurements in C, H, N, O, and S molecules at precisions of ∼1–2, including for the triple isotope components of O and S. Expected performance of TLS instruments for Venus, Saturn, Enceladus and Uranus will be described as constrained by actual measurements reported at Mars on the Curiosity rover.
Mesoscale periodic structures observed in solar wind plasma serve as an important diagnostic tool for constraining the processes that govern the formation of the solar wind. These structures have been observed in situ and in remote data as fluctuations in proton and electron density. However, only two events of this type have been reported regarding the elemental and ionic composition. Composition measurements are especially important in gaining an understanding of the origin of the solar wind as the composition is frozen into the plasma at the Sun and does not evolve as it advects through the heliosphere. Here, we present the analysis of four events containing mesoscale periodic solar wind structure during which the Iron and Magnesium number density data, measured by the Solar Wind Ion Composition Spectrometer (SWICS)on board the Advanced Composition Explorer spacecraft, are validated at statistically significant count levels. We use a spectral analysis method specifically designed to extract periodic signals from astrophysical time series and apply it to the SWICS 12-minute native resolution dataset. We find variations in the relative abundance of elements with low first ionization potential, mass dependencies, and charge state during time intervals in which mesoscale periodic structures are observed. These variations are linked to temporal or spatial variations in solar source regions and put constraints on the solar wind formation mechanisms that produce them. Techniques presented here are relevant for future, higher-resolution studies of data from new instruments such as Solar Orbiter’s Heavy Ion Sensor.
In situ analysis of rock chemistry is a fundamental tool for exploration of planets. To meet this need, a high-spatial-resolution micro x-ray fluorescence (Micro-XRF) instrument was developed that is capable of determining the elemental composition of rocks (elements Na U) with 100 microns spatial resolution, thus providing insight to the composition of features as small as sand grains and individual laminae. The resulting excitation beam is of sufficient intensity that high signal-to-noise punctual spectra are acquired in seconds to a few minutes using an Amptek Silicon Drift Detector (SDD). The instrument features a tightly focused x-ray tube and HVPS developed by Moxtek that provides up to 200 micro-A at 10 to 50 keV, with a custom polycapillary optic developed by XOS Inc. and integrated into a breadboard Micro-XRF (see figure). The total mass of the complete breadboard instrument is 2.76 kg, including mounting hardware, mounting plate, camera, laser, etc. A flight version of this instrument would require less than 5W nominal power and 1.5 kg mass. The instrument includes an Amptek SDD that draws 2.5 W and has a resolution of 135 to 155 eV FWHM at 5.9 keV. It weighs 180 g, including the preamplifier, digital pulse processor, multichannel analyzer, detector and preamp power supplies, and packaging. Rock samples are positioned relative to the instrument by a three-axis arm whose position is controlled by closed-loop translators (mimicking the robotic arm of a rover). The distance from the source to the detector is calculated from the position of a focused laser beam on the sample as imaged by the camera. The instrument enables quick scans of major elements in only 1 second, and rapid acquisition (30 s) of data with excellent signal-to-noise and energy resolution for trace element analysis
The GRACE mission has been in orbit now for three years and now regularly produces snapshots of the Earth s gravity field on a monthly basis. The convenient standard approach has been to perform global solutions in spherical harmonics. Alternative local representations of mass variations using mascons show great promise and offer advantages in terms of computational efficiency, minimization of problems due to aliasing, and increased temporal resolution. In this paper, we discuss the results of processing the GRACE KBRR data from March 2003 through August 2005 to produce solutions for GRACE mass variations over mid-latitude and equatorial regions, such as South America, India and the United States, and over the polar regions (Antarctica and Greenland), with a focus on the methodology. We describe in particular mascon solutions developed on regular 4 degree x 4 degree grids, and those tailored specifically to drainage basins over these regions.
In order to overcome spatial resolution limitations associated with physical sensor limitations when using smallsats and cubesats, we utilize an image processing technology referred to as Super-Resolution (SR). In general, software approaches are increasingly considered in connection with smaller satellites for which size, mass and power constraints limit the sensor capabilities. Being able to perform hardware vs. software trades might enable more capabilities for a lower cost. This paper describes recent experiments conducted to optimize the spatial enhancement of acquired observations using multiple sub-pixel shifted low resolution image.
In order to overcome spatial resolution limitations associated with physical sensor limitations when using smallsats and cubesats, we utilize an image processing technology referred to as Super-Resolution (SR). In general, software approaches are increasingly considered in connection with smaller satellites for which size, mass and power constraints limit the sensor capabilities. Being able to perform hardware vs. software trades might enable more capabilities for a lower cost. This paper describes recent experiments conducted to optimize the spatial enhancement of acquired observations using multiple sub-pixel shifted low resolution image.
UV spectra of K-M giant and supergiant stars and of carbon stars have been acquired with the Goddard High Resolution Spectrograph (GHRS) on the Hubble Space Telescope (HST). These spectra have been used to measure chromospheric flow and turbulent velocities, study the acceleration of their stellar winds, acquire constraints on their outer atmospheric structure, and enable estimates of their mass-loss rates. Results from our observations of the giant stars Gamma Dra (K5 III hybrid), Alpha Tau (K5 III), Gamma Cru (M3.4 III), Mu Gem (M3 IIIab), and 30 Her (MG III), the supergiants Alpha Ori (M2 Iab) and Lambda Vel (K5 Ib), and the carbon stars TX Psc (NO; C6,2) and TW Hor (NO; C7,2) will be summarized and compared. The high resolution and wavelength accuracy of these data have allowed the direct measurement of the acceleration of the stellar winds in the chromospheres of several of these stars (from initial velocities of 3-9 km/s to upper velocities of 15-25 km/s) and of the chromospheric macroturbulence (-25-35 km/s). The high signal-to-noise and large dynamic range of these spectra have allowed the detection and identification of numerous new emission features, including weak C IV emission indicative of hot transition-region plasma in the non-coronal giant Alpha Tau, many new fluorescent lines of Fe II, and the first detection of fluorescent molecular hydrogen emission and of Ca II recombination lines in the UV spectrum of a giant star. The UV spectrum of two carbon stars have been studied with unprecedented resolution and reveal extraordinarily complicated Mg II lines nearly smothered by circumstellar absorptions. Finally, comparison of synthetic UV emission line profiles computed with the Lamers et al. (1987) Sobolev with Exact Integration (SEI) code with observations of chromospheric emission lines overlain with wind absorption features provides estimates of the mass-loss rates for four of these stars.
We construct long-term time series of Greenland and Antarctic ice sheet mass change from satellite gravity measurements. A statistical reconstruction approach is developed based on a principal component analysis (PCA) to combine high-resolution spatial modes from the Gravity Recovery and Climate Experiment (GRACE) mission with the gravity information from conventional satellite tracking data. Uncertainties of this reconstruction are rigorously assessed; they include temporal limitations for short GRACE measurements, spatial limitations for the low-resolution conventional tracking data measurements, and limitations of the estimated statistical relationships between low- and high-degree potential coefficients reflected in the PCA modes. Trends of mass variations in Greenland and Antarctica are assessed against a number of previous studies. The resulting time series for Greenland show a higher rate of mass loss than other methods before 2000, while the Antarctic ice sheet appears heavily influenced by interannual variations.
This study investigated a novel mission architecture for high-resolution gravity science on small Solar System bodies. The “Gravity Poppers” mission concept consists of a swarm of small, minimalistic probes that would be deployed from a mother spacecraft to the surface of a small body and which would periodically and randomly hop around the surface. By tracking the ballistic sub-orbital trajectories of this hopping swarm, a very high-resolution gravity field can be measured, which can then be used to answer a number of scientific questions of interest regarding the interior mass distribution of the body.
Numerical experiments to assess the impact of incorporating temperature data from the VISSR Atmospheric Sounder (VAS) using the assimilation technique developed by Gal-Chen (1986) modified for use in the Mesoscale Atmospheric Simulation System (MASS) model were conducted. The scheme is designed to utilize the high temporal and horizontal resolution of satellite retrievals while maintaining the fine vertical structure generated by the model. This is accomplished by adjusting the model lapse rates to reflect thicknesses retrieved from VAS and applying a three-dimensional variational that preserves the distribution of the geopotential fields in the model. A nudging technique whereby the model temperature fields are gradually adjusted toward the updated temperature fields during model integration is also tested. An adiabatic version of MASS is used in all experiments to better isolate mass-momentum imbalances. The method has a sustained impact over an 18 hr model simulation.
We report Keck Observatory high-resolution echelle spectra of lithium at 670.8 nm in two of the lowest luminosity brown dwarf candidates in the Pleiades. These objects have estimated masses of 0.055 to 0.059 solar mass from their location on a color-magnitude diagram relative to theoretical isochrones. Stellar interior models predict that Li has not burned in them. However, we find no evidence of the Li line, at limits 100 to 1000 times below the initial abundance. This indicates that Li has in fact been depleted, presumably by nuclear processing as occurs in Pleiades stars. Interior models suggest that such large Li depletion occurs only for objects with M greater than 0.09 solar mass at the age of the Pleiades. Thus, it is unlikely that the candidates are brown dwarfs. The brown dwarf candidates present a conflict: either they have masses greater than suggested from their placement on the H-R diagram, or they do have the very low suggested masses but are nonetheless capable of destroying Li, in only 70 Myr. Until this dilemma is resolved, the photometric identification of brown dwarfs will remain difficult. Resolution may reside in higher T(sub eff) derived from optical and IR colors or in lower T(sub eff) in the interior models.