Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “LINE WIDTHS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29
All sourcesNASA NTRSDOE OSTI
NASA NTRS1996

Chip-on-Board Technology 1996 Year-end Report (Design, Manufacturing, and Reliability Study)

The major impetus for flight qualifying Chip-On-Board (COB) packaging technology is the shift in emphasis for space missions to smaller, better, and cheaper spacecraft and satellites resulting from the NASA New Millenium initiative and similar requirements in DoD-sponsored programs. The most important benefit that can potentially be derived from miniaturizing spacecraft and satellites is the significant cost saving realizable if a smaller launch vehicle may be employed. Besides the program cost saving, there are several other advantages to building COB-based space hardware. First, once a well-controlled process is established, COB can be low cost compared to standard Multi-Chip Module (MCM) technology. This cost competitiveness is regarded as a result of the generally greater availability and lower cost of Known Good Die (KGD). Coupled with the elimination of the first level of packaging (chip package), compact, high-density circuit boards can be realized with Printed Wiring Boards (PWB) that can now be made with ever-decreasing feature size in line width and via hole. Since the COB packaging technique in this study is based mainly on populating bare dice on a suitable multi-layer laminate substrate which is not hermetically sealed, die coating for protection from the environment is required. In recent years, significant improvements have been made in die coating materials which further enhance the appeal of COB. Hysol epoxies, silicone, parylene and silicon nitride are desirable because of their compatible Thermal Coefficient of Expansion (TCE) and good moisture resistant capability. These die coating materials have all been used in the space and other industries with varying degrees of success. COB technology, specifically siliconnitride coated hardware, has been flown by Lockheed on the Polar satellite. In addition, DARPA has invested a substantial amount of resources on MCM and COB-related activities recently. With COB on the verge of becoming a dominant player in DoD programs, DARPA is increasing its support of the availability of KGDs which will help decrease their cost. Aside from the various major developments and trends in the space and defense industries that are favorable to the acceptance and widespread use of'COB packaging technology, implementing COB can be appealing in other aspects. Since the interconnection interface is usually the weak link in a system, the overall circuit or system reliability may actually be improved because of the elimination of a level of interconnect/packaging at the chip. With COB, mixing packaging technologies is possible. Because some devices are only available in commercial plastic packages, populating a multi-layer laminate substrate with both bare dice and plastic-package parts is inevitable. Another attractive feature of COB is that re-workability is possible if die coating is applied only on the die top. This method allows local replacement of individual dice that were found to be defective instead of replacing an entire board. In terms of thermal management, unpackaged devices offer a shorter thermal resistance path than their packaged counterparts thereby improving thermal sinking and heat removal from the parts.

Le, Binh Q.↗
NASA NTRS1998

Recent Advances in Visualizing 3D Flow with LIC

Line Integral Convolution (LIC), introduced by Cabral and Leedom in 1993, is an elegant and versatile technique for representing directional information via patterns of correlation in a texture. Although most commonly used to depict 2D flow, or flow over a surface in 3D, LIC methods can equivalently be used to portray 3D flow through a volume. However, the popularity of LIC as a device for illustrating 3D flow has historically been limited both by the computational expense of generating and rendering such a 3D texture and by the difficulties inherent in clearly and effectively conveying the directional information embodied in the volumetric output textures that are produced. In an earlier paper, we briefly discussed some of the factors that may underlie the perceptual difficulties that we can encounter with dense 3D displays and outlined several strategies for more effectively visualizing 3D flow with volume LIC. In this article, we review in more detail techniques for selectively emphasizing critical regions of interest in a flow and for facilitating the accurate perception of the 3D depth and orientation of overlapping streamlines, and we demonstrate new methods for efficiently incorporating an indication of orientation into a flow representation and for conveying additional information about related scalar quantities such as temperature or vorticity over a flow via subtle, continuous line width and color variations.

Interrante, Victoria↗
NASA NTRS1996

An Acoustic Charge Transport Imager for High Definition Television Applications: Low-Voltage SAW Amplifiers on Multilayer GaAs/ZnO Substrates

This thesis addresses the acoustoelectric issues concerning the amplification of surface acoustic waves (SAWs) and the reflection of SAWs from slanted reflector gratings on GaAs, with application to a novel acoustic charge transport (ACT) device architecture. First a simple model of the SAWAMP was developed, which was subsequently used to define the epitaxially grown material structure necessary to provide simultaneously high resistance and high electron mobility. In addition, a segmented SAWAMP structure was explored with line widths on the order of an acoustic wavelength. This resulted in the demonstration of SAWAMPS with an order of magnitude less voltage and power requirements than previously reported devices. A two-dimensional model was developed to explain the performance of devices with charge confinement layers less then 0.5 mm, which was experimentally verified. This model was extended to predict a greatly increased gain from the addition of a ZnO overlay. These overlays were experimentally attempted, but no working devices were reported due to process incompatibilities. In addition to the SAWAMP research, the reflection of SAWs from slanted gratings on GaAs was also studied and experimentally determined reflection coefficients for both 45 deg grooves and Al stripes on GaAs have been reported for the first time. The SAWAMp and reflector gratings were combined to investigate the integrated ring oscillator for application to the proposed ACT device and design parameters for this device have been provided.

Hunt, W. D.↗
NASA NTRS1997

Determination of 3D coronal structures from UVCS/SOHO synoptic observations

Daily coronal synoptic observations with the ultraviolet coronagraph spectrometer (UVCS) on SOHO are used to create Carrington maps of line of sight intensities and spectral line widths for H I Lyman alpha and the O 6 1032/1037 doublet. These 2D maps can then be used as inputs to a tomographic inversion routine to produce 3D models of the corona out to the 2.5 solar radius in the polar regions (3.0 solar radius in equatorial regions). The initial results for the determination of O(5+) outflow velocities as a function of heliographic latitude is presented.

Strachan, L.↗
NASA NTRS1998

Characterization of Thin Film Microstrip Lines on Polyimide

This paper presents an in depth characterization of thin film microstrip (TFMS) lines fabricated on Dupont PI-2611 polyimide. Measured attenuation and effective dielectric constant is presented for TFMS lines with thicknesses from 2.45-7.4 microns and line widths from 5-34.4 microns over the frequency range of 1-110 GHz. The attenuation is separated into conductor and dielectric losses to determine the loss tangent of Dupont PI-2611 polyimide over the microwave frequency range. In addition, the measured characteristics are compared to closed form equations for a and eff from the literature. Based on the comparisons, recommendations for the best dosed form design equations for TFMS are made.

Ponchak, George E.↗
NASA NTRS2000

Evanescent Microwave Probes Using Coplanar Waveguide and Stripline for Super-Resolution Imaging of Materials

An evanescent field microwave imaging probe based on half-wavelength, microwave transmission line resonators is described. Optimization of the probe tip design, the coupling gap, and the data analysis has resulted in images of metal lines on semiconductor substrates with 2.6 microns spatial resolution and a minimum detectable line width of 0.4 microns at 1 GHz.

Ponchak, G. E.↗
NASA NTRS2000

Sub-Optical Lithography With Nanometer Definition Masks

Nanometer feature size lithography represents a major paradigm shift for the electronics and micro-electro-mechanical industries. In this paper, we discuss the capacity of dynamic focused reactive ion beam (FIB) etching systems to undertake direct and highly anisotropic erosion of thick evaporated gold coatings on boron-doped silicon X-ray mask membranes. FIB offers a new level of flexibility in micro fabrication, allowing for fast fabrication of X-ray masks, where pattern definition and surface alteration are combined in the same step which eliminates the whole lithographic process, in particular resist, resist development, electro-deposition and resist removal. Focused ion beam diameters as small as 7 nm can be obtained enabling fabrication well into the sub-20 nm regime. In preliminary demonstrations of this X-ray mask fabrication technique 22 nm width lines were milled directly through 0.9 microns of gold and a miniature mass spectrometer pattern was milled through over 0.5 microns of gold. Also presented are the results of the shadow printing, using the large depth of field of synchrotron high energy parallel X-ray beam, of these and other sub-optical defined patterns in photoresist conformally coated over surfaces of extreme topographical variation. Assuming that electronic circuits and/or micro devices scale proportionally, the surface area of devices processed with X-ray lithography and 20 nm critical dimension X-ray masks would be 0.5% that of contemporary devices (350 nm CD). The 20 CD mask fabrication represents an initial effort - a further factor of three reduction is anticipated which represents a further order-of-magnitude reduction in die area.

Hartley, Frank T.↗
NASA NTRS2000

Little Homunculus with in the Homunculus of Eta Carinae

The famous HST/WFPC2 images of Eta Carinae provide a two-dimensional projection of the bipolar nebula that is really a three-dimensional structure. Much is hidden in subtle, projected details that a velocity-tuned instrument can pull apart. We have used the HST/STIS with a 52" x 0.1" aperture and with about 5000 spectral resolving power to examine the kinetic information contained within emission/absorption features. By velocity tuning, we can translate this information into spatial structures. The spectroscopic datasets have been transformed to a set of images, spaced at half instrumental line width steps, 15 - 20 km/s , and with a spatial resolution of 0.1 x 0.1 arcsec near Balmer beta and 0.25 x 0.1 arcsec near Balmer alpha. We examined these narrow-band images and individual spectra to characterize the nature of an internal nebula (formerly known as the Integral nebula). The shape of this nebulosity is an bipolar nebula, deeply embedded within the Homunculus, the well-known bipolar nebula surrounding Eta Carinae. The internal nebula is shaped nearly identically to the Homunculus. It is best described as a "little Homunculus within the Homunculus". Indeed, it is reminiscent of the Russian dolls, known as Matryoshka dolls, that successively nest within each larger doll. For that reason, we call this internal nebula the Matryoshka nebula. This was performed as one of the STIS GTO key projects and was funded by the HST project. Observations were done through the STScI.

Ishibashi, Kazunori↗
NASA NTRS2001

Sunlit Io Atmospheric [O I] 6300 A and the Plasma Torus

A large database of sunlit Io [O I] 6300A emission, acquired over the period 1990-1999, with extensive coverage of Io orbital phase angle phi and System III longitude lambda(sub III), exhibits significant long-term and short-term variations in [O I] 6300A emission intensities. The long-term average intensity shows a clear dependence on lambda(sub III), which establishes conclusively that the emission is produced by the interaction between Io's atmosphere and the plasma torus. Two prominent average intensity maxima, 70 deg to 90 deg wide, are centered at lambda(sub III) about 130deg. and about 295 deg. A comparison of data from October 1998 with a three-dimensional plasma torus model, based upon electron impact excitation of atomic oxygen, suggests a basis for study of the torus interaction with Io's atmosphere. The observed short-term, erratic [O I] 6300A intensity variations fluctuate approximately 20% to 50% on time scale of tens of minutes with less frequent fluctuations of a factor of about 2. The most likely candidate to produce these fluctuations is a time-variable energy flux of field-aligned nonthermal electrons identified recently in Galileo PLS data. If true, the short-term [O I] intensity fluctuations may be related to variable field-aligned currents driven by inward and outward torus plasma transport and/or transient high-latitude, field-aligned potential drops. A correlation between the intensity and emission line width indicates molecular dissociation may contribute significantly to the [O I] 6300A emission. The nonthermal electron energy flux may produce O(1-D) by electron impact dissociation of SO2 and SO, with the excess energy going into excitation of O and its kinetic energy. The [O I] 6300A emission database establishes Io as a valuable probe of the torus, responding to local conditions at Io's position.

Oliversen, Ronald J.↗
NASA NTRS1994

The FU Orionis Outburst as a Thermal Disk Accretion Event: Detailed Calculations and Comparison to Observations

FU Orionis outbursts are temporary large increases in luminosity: x (40 - 250) thought to occur repeatedly in all low mass young stellar systems. We discuss detailed calculations of viscous accretion disks suggesting that FU Ori events signify the existence of a protostellar disk transporting mass at a rate of (1 - 10) x 10(exp 6) solar mass / yr, in agreement with theoretical and observational estimates of molecular cloud core collapse rates. Accretion through the inner edge of disks subject to outburst is self-regulated through the thermal ionization instability such that long periods (approx. 1000 yrs) of low mass flux: (1 - 10) x 10(exp -5) solar mass / yr, are punctuated by short periods (approx. 100 yrs) of high mass flux: (1-10) x 10(exp -5) solar mass / yr. The unstable region of the disk extends radially only to a distance of approx. = 1/4 AU. Beyond this region matter is transported stably at the infall rate. In systems for which M(sum *) = 1 solar mass with an inner disk edge of 3 solar radius, the critical rate for outbursts is 5 x 10(exp -7) solar mass / yr independent of the magnitude of the viscous ce parameter consistent with estimates of boundary layer mass flux in T Tauri stars. We use timescales of observed outbursts to constrain the magnitude of the alpha parameter to be 10(exp -4) where hydrogen is neutral and 10(exp -3) where ionized. Light curves of V1515 Cyg, FU Ori, and V1057 Cya are reproduced; the latter two require application of a small perturbation in surface density to produce observed rapid rise times. Detailed reply is made to objections to the accretion disk model for outbursts. Comparison to observations are made of time dependent spectral energy distributions, colors, and line-width velocity evolution.

Bell, K. R.↗
NASA NTRS1994

The FU Orionis Outburst as a Thermal Disk Accretion Event: Detailed Calculations and Comparison to Observations

FU Orionis outbursts are temporary large increases in luminosity: x(40-250) thought to occur repeatedly in all low mass young stellar systems. We discuss detailed calculations of viscous accretion disks suggesting that FU Ori events signify the existence of a protostellar disk transporting mass at a rate of (1-10) x 10(exp -6) Solar Mass/yr, in agreement with theoretical and observational estimates of molecular cloud core collapse rates. Accretion through the inner edge of disks subject to outburst is self-regulated through the thermal ionization instability such that long periods (approximately 1000 yrs) of low mass flux: (1-10) x 10(exp -8) Solar Mass/yr, are punctuated by short periods (approximately 100 yrs) of high mass flux: (1-10) x 10(exp -5) Solar Mass/yr. The unstable region of the disk extends radially only to a distance of approximately 1/4 AU. Beyond this region matter is transported stably at the infall rate. In systems for which M = 1 Solar Mass, with an inner disk edge of 3 Solar Radius, the critical rate for outbursts is 5 x 10(exp -7) Solar Mass/yr independent of the magnitude of the viscous alpha parameter consistent with estimates of boundary layer mass flux in T Tauri stars. We use timescales of observed outbursts to constrain the magnitude of the alpha parameter to be 10(exp -4) where hydrogen is neutral and 10(exp -3) where ionized. Light curves of V1515 Cyg, FU Ori, and V1057 Cyg are reproduced; the latter two require application of a small perturbation in surface density to produce observed rapid rise times. Detailed reply is made to objections to the accretion disk model for outbursts. Comparison to observations are made of time dependent spectral energy distributions, colors, and line-width velocity evolution.

Bell, K. R.↗
NASA NTRS1995

The No Vibrational Fundamental Band: Temperature Dependence of N2-Broadening Coefficients

Rovibrational spectra of the vibrational fundamental of nitric oxide have been recorded under N2-broadening conditions at 0.0056 cm(exp-1) resolution using the Solar McMath FTS at the Kitt Peak National Observatory. The temperature range for the experiments was 296 K to 183 K. The 30 cm absorption cell used for the measurements is cooled with a helium compressor and can operate at temperatures down to 60 K; vibration isolation of the cell allows its use with high performance Fourier Transform Spectrometers. From these spectra, N2-broadened line widths have been determined thru m = 16.5. Qualitative as well as quantitative discrepancies are observed between our experimental determinations of the temperature dependence of the broadening and theoretical calculations.

Spencer, M. N.↗
NASA NTRS1998

Vibrational Spectrum of (CO)2 on Cu(100): Quantum Calculations with 18 Coupled Mode

We report calculations of the vibrational frequencies of CO dimer on Cu(100) using recently developed vibrational self-consistent field code. Eighteen modes are treated explicitly within three modes coupling representation. Nine symmetry distinct doublets are observed and the corresponding frequencies are computed. The thermally broadened spectrum of the CO-stretch fundamental is calculated at various temperatures. Both the temperature and coverage dependence of both the average CO-stretch frequency and the corresponding line-width are consistent with experimentally observed trends. The document contains no classified information International clearance is needed.

Dzegilenko, Fedor↗
NASA NTRS1998

The Impact of FU Orionis Outbursts and the Solar Nebula

Protostellar systems are variable on many timescales. One of the most dramatic forms of variability known to occur in low mass stellar systems is the FU Orionis outburst (Herbig 1977). Throughout a typical outburst lasting several decades, system luminosities may be a hundred times what is typical of the quiesent state. FU Orionis outburst events are thought to have significant impact on the thermal structure of the protosolar nebula; their existence has been used to explain features in the meteoritic record from thermally induced homogenization to the formation of chondrules. Until recently, the magnitude of the likely effect from such outbursts has been largely speculative due to the lack of a detailed understanding of the outburst mechanism. Recent numerical models (Bell\& Lin 1994) have demonstrated the viability of the observational hypothesis (Hartmann\& Kenyon 1985) that the radiation observed during outburst is emitted by a luminous circumstellar disk transporting mass at a thousand times the quiesent rate. Light curves and color and line width evolution observed in FU Orionis systems are naturally explained by time dependent outbursting model disks (Bell et al. 1995). The radial temperature structure and shape of the disk during outburst derived from these models may be used to calculate the outburst's expected impact on primitive material at various radii throughout the disk. In this review, we will begin by discussing what is known about the FU Orionis outburst phenomenon from recent observations and theory including statistically deduced outburst timescales and observed peak temperatures. Unless covered by another author, we will discuss the evidence which suggests that outburst radiation is emitted by a circumstellar disk rather than by the star and will briefly review the thermal instability as a mechanism for outburst. We will then report on recent work which investigates the likely heating of solar nebula material due to FU Orionis outbursts including the following effects: (1) heating of the planet forming region by direct radiation from the hot inner nebula; (2) heating by the diffuse radiation field of a coccooning envelope; and (3) time-dependent penetration of the increased luminosity from the above sources into the optically thick nebula. Some of this work is currently in progress. The potential effects on condensation and migration in the nebula and the thermal processing of solids will be evaluated.

Bell, Robbins↗
NASA NTRS2002

Effective Frequency Technique

An effective monochromatic frequency technique is described to represent the effects of finite spectral bandwidth for active and passive measurements centered on an absorption line, a trough region, or a slowly varying spectral feature. For Gaussian and rectangular laser line shapes, the effective frequency is shown to have a simple form which depends only on the instrumental line shape and bandwidth and not on the absorption line profile. The technique yields accuracies better than 0.1% for bandwidths less than 0.2 times the atmospheric line width.

Kirk, C. Laurence↗
NASA NTRS2004

Further Progress in Noise Source Identification in High Speed Jets via Causality Principle

To locate noise sources in high-speed jets, the sound pressure fluctuations p/, measured at far field locations, were correlated with each of density p, axial velocity u, radial velocity v, puu and pvv fluctuations measured from various points in fully expanded, unheated plumes of Mach number 0.95, 1.4 and 1.8. The velocity and density fluctuations were measured simultaneously using a recently developed, non-intrusive, point measurement technique based on molecular Rayleigh scattering (Seasholtz, Panda, and Elam, AIAA Paper 2002-0827). The technique uses a continuous wave, narrow line-width laser, Fabry-Perot interferometer and photon counting electronics. The far field sound pressure fluctuations at 30 to the jet axis provided the highest correlation coefficients with all flow variables. The correlation coefficients decreased sharply with increased microphone polar angle, and beyond about 60 all correlation mostly fell below the experimental noise floor. Among all correlations < puu; p/> showed the highest values. Interestingly, , in all respects, were very similar to . The and correlations with 90deg microphone fell below the noise floor. By moving the laser probe at various locations in the jet it was found that the strongest noise source lies downstream of the end of the potential core and extends many diameters beyond. Correlation measurement from the lip shear layer showed a Mach number dependency. While significant correlations were measured in Mach 1.8 jet, values were mostly below the noise floor for subsonic Mach 0.95 jet. Various additional analyses showed that fluctuations from large organized structures mostly contributed to the measured correlation, while that from small scale structures fell below the noise floor.

Panda, J.↗
NASA NTRS2005

Going to the Bottom of the Explosion that Formed Cas A

The purpose of this INTEGRAL AO 1 proposal was to observe the gamma-ray lines at 1157 keV, as well as 68 keV and 78 keV of the (44)Ti decay chain from the youngest known galactic supernova remnant Cas A. The radioactive decay of (44)Ti in Cas A was first detected by COMPTEL in the 1157 keV line and later confirmed in the lower energy lines using BeppoSAX data. Despite the second confirming measurement, the flux value still has a considerable error, due to a low signal over background ratio and the poor definition of the continuum background in the range of 70 - 100 keV above the line energies. In addition to improving this flux measurement, INTEGRAL has the unique capability, in principle, to measure the line width of the emission. This type of measurement can further constrain supernova explosion models. Unfortunately, the INTEGRAL instrumental background, especially in the SPI spectrometer, turned out to be significantly higher than estimated at the time of proposal submission before launch. This, and to a smaller extent the reduced effective exposure time of about 1.5 Ms compared to requested 2.5 Ms, has precluded us from reaching the sensitivity necessary for this measurement. Studies of the background variability with the goal of improving background modeling are ongoing, and additional 2.5 Ms observing time has just been approved for the next observing cycle.

Oberlack, Uwe↗