Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “LEAD”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Techno-Economic Analysis of Gas-Liquid Contactors for Tritium Extraction from Lead-Lithium

To enable a sustainable fuel cycle, any deuterium-tritium fusion reactor must breed its tritium fuel onsite. Lead-lithium (PbLi), a eutectic metal, is a leading liquid breeder material for tritium generation. One challenge with PbLi blanket technology is the extraction of tritium from the molten eutectic. Three technologies are the focus of worldwide research: the vacuum permeator, the vacuum sieve tray, and the gas-liquid contactor (GLC). The present work offers a methodology for designing, sizing, optimizing, and costing a trickle-bed GLC. Here, we analyzed tritium extraction from PbLi using MELODIE experimental data by applying traditional packed bed mass transfer efficiency models along with supplementary models, like film theory. Our analysis revealed that traditional packed bed mass transfer efficiency models do not fit the MELODIE loop experimental data. Moreover, uncertainty in PbLi solubility resulted in a 325-fold increase in required gas flow rates when comparing identical packing heights. The film theory liquid mass transfer coefficient, Delt-Olujic wettability model, and Reiter tritium solubility values fit the MELODIE data best and were used both in the design and to conduct the economic analysis. Techno-economic analysis of the GLC was performed to evaluate three design sizes, all achieving a minimum extraction efficiency of 90 [%] for a total tritium extraction of 31 [kg/yr].

Fusion Fuel Cycle↗
DOE OSTI2024

Tunneling magnetoresistance in MgO tunnel junctions with Fe-based leads in empirically corrected density functional theory

The minority-spin Fe/MgO interface states are at the Fermi level in density functional theory (DFT), but experimental evidence and GW calculations place them slightly higher in energy. This small shift can strongly influence tunneling magnetoresistance (TMR) in junctions with a thin MgO barrier and its dependence on the concentration of Co in the electrodes. Here, in this study, an empirical potential correction to DFT is introduced to shift the interface states up to match the tunnel spectroscopy data. With this shift, TMR in Fe/MgO/Fe junctions exceeds 800% and 3000% at 3 and 4 monolayers (ML) of MgO, respectively. We further consider the effect of alloying of the Fe electrodes with up to 30% Co or 10% V, treating them in the coherent potential approximation (CPA). Alloying with Co broadens the interface states and brings a large incoherent minority-spin spectral weight to the Fermi level. Alloying with V brings the minority-spin resonant states close to the Fermi level. However, in both cases the minority-spin spectral weight at the Fermi level resides primarily at the periphery of the Brillouin zone, which is favorable for spin filtering. Using convolutions of k II -resolved barrier densities of states calculated in CPA, it is found that TMR is strongly reduced by alloying with Co or V but still remains above 500% at 4 ML of MgO up to 30% of Co or 5% V. At 5 ML, the TMR increases above 1000% in all systems considered. However, while TMR declines sharply with increasing bias up to 0.2 eV in the tunnel junctions with pure Fe leads, it remains almost constant up to 0.5 eV if leads are alloyed with Co.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2021

Structural Stability of Tin-Lead Halide Perovskite Solar Cells

One of the key features that makes halide perovskite solar cells such an attractive and intensely researched photovoltaic (PV) technology, is the tunability of the bandgap of these halide perovskite materials [1], [2]. Shortly after it was established that the bandgap could be increased to 1.7-1.8 eV, investigations into the application for silicon based tandem solar cells launched. Within a few years, conversion efficiencies of up to 28 % have been reported [3]. Concurrently, the interest in commercial application of this technology emerged and have rapidly increased. Whereas there are advantages to piggy backing on an established PV technology such as silicon, efforts to develop all-perovskite tandem solar cells are of considerable interest. Partly substituting the metal cation in the ABX3 perovskite enables the low bandgap absorbers required for an all-perovskite tandem solar cell. One common approach is to partially substitute the lead with tin, however these materials often suffered from poor stability. Therefore the development of an efficient, stable mixed tin-lead perovskite is key to enabling all-perovskite tandem solar cells.

degradation↗
DOE OSTI2023

Fast Neutron Evaluations for Advanced Lead Systems [Slides]

This presentation touches on fast neutron evaluations for advanced lead systems. This lecture covers project goals to evaluate lead (Pb) isotopes with a focus on improving predictive capabilities of fast systems. Additionally, the project sets out to benchmark available critical and shielding experiments with sensitivity to Pb and utilize RPI Quasi-Differential Scattering experiment for scattering reactions. This project will perform Resolved Resonance Region (RRR) and fast region evaluations for natural Pb isotopes with differential data on EXchange FORmat for experimental numerical nuclear reaction data (EXFOR) and ultimately will submit evaluations to the ENDF/B-VIII.1 library.

07 ISOTOPE AND RADIATION SOURCES↗
DOE OSTI2023

From Hydrometeor Size Distribution Measurements to Projections of Wind Turbine Blade Leading-Edge Erosion

Wind turbine blade leading-edge erosion (LEE) is a cause of increased operation and maintenance costs and decreased annual energy production. Thus, detailed, site-specific quantification of likely erosion conditions are critically needed to inform wind plant owner/operator decisions regarding mitigation strategies. Estimating the damage potential at a wind plant site requires accurate measurement of precipitation intensity, phase, droplet size distributions, wind speeds and their joint statistics. The current work quantifies the effect of disdrometer type on the characterization of LEE potential at a site in the US Southern Great Plains. using observations from three co-located disdrometers (an optical, an impact and a video disdrometer), along with hub-height wind-speed observations from a Doppler lidar and two LEE models: a kinetic energy model and the Springer model. Estimates of total kinetic energy of hydrometeor impacts over the four-year study period vary by as much as 38%, and coating lifetime derived from accumulated distance-to-failure estimates from the Springer model differ by an even greater amount, depending on disdrometer type. Damage potential at this site is concentrated in time, with 50% of impact kinetic energy occurring in 6–12 h per year, depending on which set of disdrometer observations is used. Rotor-speed curtailment during the most erosive 0.1–0.2% of 10 min periods is found to increase blade lifetimes and lead to the lowest levelized cost of energy.

17 WIND ENERGY↗
DOE OSTI2020

Kentucky: Using LEAD Tool Data to Fund Energy Efficiency Programs

The Kentucky Office of Energy Policy (OEP) applied the U.S. Department of Energy’s (DOE’s) web-based Low-Income Energy Affordability Data (LEAD) Tool to identify areas of their state with energy affordability needs. Kentucky OEP staff used the LEAD Tool to identify counties in Kentucky with the highest energy burden, which is the percentage of household income spent on energy. With this knowledge, Kentucky OEP staff allocated funds to relevant nonprofit organizations that provide home repairs, weatherization upgrades, and other solutions in areas where these services have the highest potential energy saving benefits and can reduce energy burden.

Low-Income Energy Affordability Data Tool, LEAD To↗
DOE OSTI2023

Low-Income Energy Affordability Data (LEAD) Tool

The Low-income Energy Affordability Data (LEAD) tool was created to provide data, such as energy burden, to stakeholders to make data driven decisions. The LEAD Tool provides a starting point for local governments, NGOs, companies, etc. to find areas with higher energy burden and cost to inform decisions about funding distribution and program qualifications. This presentation was given to energy efficiency and conservation block grant program applicants to explain how this tool can help them develop their energy efficiency and conservation strategy.

ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2025

Pressure‐Induced Structural and Optoelectronic Modulations in 2D Dion‐Jacobson Hybrid Lead Iodide Perovskites With a Rigid Spacer

2D hybrid organic-inorganic perovskites (HOIPs) are known for their superior chemical and thermal stability over 3D variants, positioning them as promising materials for advanced optoelectronic applications. Applying external high pressure is an effective strategy to modify their structures and tune their optoelectronic properties. This study examines the high-pressure behavior of a Dion-Jacobson type 2D HOIP, DPDAPbI 4 , which incorporates the rigid organic spacer N,N-dimethylphenylene-p-diammonium (DPDA). Utilizing photoluminescence, UV–visible absorption, vibrational spectroscopy, and in situ synchrotron powder X-ray diffraction, an isostructural phase transition is identified near 1.5 GPa, marked by a notable shift in photoluminescence intensity linked to free exciton emission. Synchrotron X-ray diffraction reveals significant anisotropic compression along the c-axis, while structural analysis indicates the rare phenomenon of reduced lead-iodide octahedral distortion below 2 GPa, contrasting with the increased octahedral distortion reported in most previous studies on lead-based 2D HOIPs. Density functional theory calculations elucidate the structural origins and mechanisms driving the pressure-induced phase transition and optoelectronic tuning. These findings underscore the critical interplay between rigid organic spacers and inorganic octahedra in modulating high-pressure optoelectronic properties, offering valuable insights for designing future 2D HOIPs with tailored functionalities.

14 SOLAR ENERGY↗
DOE OSTI2022

Cesium Lead Halide Perovskite Nanocrystals Assembled in Metal–Organic Frameworks for Stable Blue Light Emitting Diodes

All inorganic cesium lead trihalide nanocrystals are promising light emitters for bright light emitting diodes (LEDs). Here we demonstrate CsPb(BrCl) 1.5 nanocrystals in metal-organic frameworks (MOF) thin films to achieve bright and stable blue LEDs. The lead metal nodes in the MOF thin film react with Cs-halide salts, resulting in 10~20 nm nanocrystals. This is revealed by X-ray scattering and transmission electron microscopy. Employing the CsPbX 3 - MOF thin films as emission layers, bright deep blue and sky-blue LEDs are demonstrated that emit at 452 nm and 476 nm respectively. The maximum external quantum efficiencies of these devices are 0.72% for deep blue LEDs and 5.6% for sky blue LEDs. More importantly, the device can maintain 50% of its original electroluminescence (T 50 ) for 2.23 hours when driving at 4.2V. Detailed optical spectroscopy and time-of-flight secondary ion mass spectroscopy suggest that the ion migration can be suppressed that maintains the emission brightness and spectra. Our study provides a new route for fabricating stable blue light emitting diodes with all-inorganic perovskite nanocrystals.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2023

Synthesis and Characterization of a New Ferroelectric with Low Lead Content, a High Curie Temperature, and a High Piezoelectric Response

Abstract A new solid solution (1− x )Bi(Fe 2/8 Ti 3/8 Mg 3/8 )O 3 –( x )PbTiO 3 (BFTM‐PT) is synthesized and the electromechanical properties are measured. This system is defined as a low‐lead material with ferroelectric/piezoelectric behavior and a morphotropic phase boundary (MPB) that leads to enhanced properties. The MPB is located between x = 0.30 and 0.35 and coincides with a structural phase transition and a sharp increase in the piezoelectric response. The system demonstrates ferroelectric hysteresis where x = 0.325 displays the best properties with a maximum polarization of 39 µC cm −2 and a remnant polarization of 26 µC cm −2 . The range of compositions has high Curie temperature ( T c ), ranging from 625–650 °C. Materials with a T c above 400 °C typically have a low d 33 of <50 pC N −1 at room temperature. However, BFTM‐PT has a higher d 33 that most other compositions with a T c in this range, with the highest being 145 pC N −1 for x = 0.375. The d 33 drops off above 100 °C, but doping studies can be done in the future to stabilize the piezoelectric response at higher temperatures. These outstanding properties open the possibility of new transducer applications, in particular ones requiring high temperature and high power.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Light–Induced Frenkel Defect Pair Formation Can Lead to Phase–Segregation of Otherwise Miscible Halide Perovskite Alloys

Alloys of ABX 3 halide perovskites (HP) exhibit unique phase behavior compared to traditional III-V and II-VI semiconductor alloys used in solar cells. While the latter typically have good mutual miscibility when their mixed components are size matched, and phase-segregate when size mismatched, HP alloys show good miscibility in the dark but can phase-segregate under light. Quantum mechanical calculations described herein reveal light-induced defect formation and migration hold the key. Specifically, the interaction between a halogen vacancy V X with halogen interstitial X i forming together a Frenkel-pair defect emerges as the enabler for phase-segregation in HP alloys. At a threshold bromine composition in the Br-I alloys, the photogenerated holes in the valence band localize, creating thereby a doubly-charged iodine Frenkel-pair (V I + I i ) 2+ . Faster migration of iodine over bromine interstitial into the vacant iodine V I site leads to the formation of iodine-rich and iodine-depleted regions, establishing phase-segregation. Removal of the mobile defects–the agent of segregation–by dark thermal annealing, supplies the opposing force, leading to reversal of phase-segregation. Furthermore, this atomistic understanding can enable some control of the phase-segregation by selecting substituting elements on the B site–such as replacing some Pb by Sn–that are unable to form stable Frenkel defects.

14 SOLAR ENERGY↗
DOE OSTI2025

Computational and Experimental Investigation of Chiral and Achiral Two‐Dimensional Organic Lead Bromide Perovskites: Octahedral Distortions and Electronic and Optical Properties

A computational investigation is presented, in conjunction with synthesis and experimental characterization, into the structural, electronic, and optical properties of layered two-dimensional organic lead bromide perovskites. Materials based on the chiral (R/S)-4-fluoro-α-methylbenzylammonium (R/S-FMBA), which have been shown to lead to bright room-temperature circularly polarized luminescence, are contrasted with the similar achiral 4-fluorobenzylammonium (FBA). Using density functional theory (DFT) with van der Waals (vdW) corrections, relaxed structures (compared with X-ray diffraction, XRD) and optical absorption spectra (compared with experiments) are studied, as well as band structure and orbital character of transitions. A Python code is developed and provided to calculate octahedral distortions and compare DFT and XRD results, finding that vdW corrections are important for accuracy and that DFT overestimates octahedral tilt angles. (FMBA) 2 PbBr 4 shows among the largest tilt angle differences (often termed Δ β ) reported, 14°–15°, indicating strong inversion symmetry-breaking, which enables its chiral emission. A large resulting Dresselhaus spin-splitting effect is found. The lowest-energy optical transitions involve the perovskite only and are polarized within the layer. This work furthers understanding of structure-property relations with applications to optoelectronics and spintronics.

UV/vis spectroscopy↗
DOE OSTI2024

High‐throughput combinatorial approach expedites the synthesis of a lead‐free relaxor ferroelectric system

Abstract Developing novel lead‐free ferroelectric materials is crucial for next‐generation microelectronic technologies that are energy efficient and environment friendly. However, materials discovery and property optimization are typically time‐consuming due to the limited throughput of traditional synthesis methods. In this work, we use a high‐throughput combinatorial synthesis approach to fabricate lead‐free ferroelectric superlattices and solid solutions of (Ba 0.7 Ca 0.3 )TiO 3 (BCT) and Ba(Zr 0.2 Ti 0.8 )O 3 (BZT) phases with continuous variation of composition and layer thickness. High‐resolution x‐ray diffraction (XRD) and analytical scanning transmission electron microscopy (STEM) demonstrate high film quality and well‐controlled compositional gradients. Ferroelectric and dielectric property measurements identify the “optimal property point” achieved at the composition of 48BZT–52BCT. Displacement vector maps reveal that ferroelectric domain sizes are tunable by varying {BCT–BZT} N superlattice geometry. This high‐throughput synthesis approach can be applied to many other material systems to expedite new materials discovery and properties optimization, allowing for the exploration of a large area of phase space within a single growth. image

36 MATERIALS SCIENCE↗
DOE OSTI2025

Strontium‐Enriched Barite for Enhanced PbSO 4 Nucleation in Lead‐Acid Batteries

Abstract Barite (BaSO 4 ) crystals are an important additive in lead acid batteries due to their ability to promote the controlled nucleation and growth of anglesite (PbSO 4 ) during battery cycling. This is due to BaSO 4 ’s isostructural match with PbSO 4 , which facilitates epitaxial nucleation. However, BaSO 4 ’s efficacy as a nucleation promoter is limited by lattice mismatches between the two phases of 1–5%. Here, strontium‐enriched barite, (Ba,Sr)SO 4 , is synthesized to produce a nucleating promoter that displays an improved lattice match with PbSO 4 . Nucleation of PbSO 4 from Pb‐rich sulfuric acid solutions on strontium‐free and strontium‐enriched barite (up to 17 mol% Sr) is investigated using in‐situ atomic force microscopy and optical microscopy. At low strontium concentrations, PbSO 4 forms by the Stranski–Krastanov growth pathway (monolayer + island formation), with most nucleation occurring on edges and surface defects. At higher concentrations, the layer‐by‐layer growth mechanism known as Frank van‐der‐Merwe growth is observed, which allows for facile growth of continuous PbSO 4 films across the BaSO 4 surface. These films are successfully re‐dissolved on exposure to Pb‐free sulfuric acid. The results show that strontium incorporation fundamentally alters the mechanism of PbSO 4 nucleation on BaSO 4 , and thus provides a potential avenue for creating improved nucleation promoters in lead‐acid batteries.

Campbell, Colin T. [Pacific Northwest National Lab↗
DOE OSTI2022

Computational Methodology to Simulate Pyrometallurgical Processes in a Secondary Lead Furnace

Pyrometallurgical recovery of nonferrous metals involves a combination of thermally intensive transformations during exothermic gas-phase reactions, endothermic decomposition of solid charge, and melting of simpler solids. In the recovery of secondary lead, simultaneous thermal effects in a reverberatory-style furnace cause a melt pool to accumulate at the bottom, with lighter solids (slag) floating above and gaseous products from decomposition of the charge diffusing through the gas–slag interface. Species from oxy-fuel combustion of natural gas, species profiles from smelting reactions, and the formation of a melt pool consisting primarily of lead are simulated via a time-averaged formulation. Predictions of outflow are compared with preset inflow profiles to ensure conservation of mass. Thermal profiles for solid, liquid, and gas phases are presented by species. A novel method is implemented to model the latent heat of fusion using a heterogeneous chemical reaction. The simulation is conducted in Simcenter STAR-CCM+ v. 16.02.009-R8.

Rao, Vivek↗