Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “IRIDIUM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29

Long-Term Clinical and Cosmetic Outcomes After Breast Conservation Treatment for Women With Early-Stage Breast Carcinoma According to the Type of Breast Boost

Purpose: The present study was performed to compare outcomes after breast conservation treatment with iridium-192 implant boost vs. electron boost. Methods and Materials: From 1977 to 1983, 141 patients were treated with whole breast radiotherapy followed by iridium-192 boost after breast-conserving surgery. They were matched 1:1 to patients treated with electron boost. Outcome measures included survival, local recurrence, cosmesis, and complications. Results: Median follow-up was 16.7 and 12.6 years for the implant vs. electron groups (p < 0.001). Rates of local recurrence, freedom from distant metastases, and overall survival at 10/20 years did not differ between the groups, nor did patterns of first failure. Patients in the electron group were more likely to have excellent/good cosmesis than those in the implant group 1 year after radiotherapy (p = 0.014); this trend continued through 10 years but did not reach statistical significance at years 5/10. Complication rates were similar, although patients receiving electron boost seemed less likely to develop breast fibrosis than did those receiving implant boost (23/141 vs. 58/141, respectively, incidence rate ratio 0.7, p = 0.17). Conclusions: Twenty-year data demonstrate no difference in rates of local recurrence, freedom from distant metastases, overall survival, or patterns of failure between groups treated with these two well-described radiotherapy boost techniques. Better cosmesis was observed in the electron group 1 year after radiotherapy, with a trend continuing for 10 years. The incidence of complications was similar between the groups, with a trend toward increased fibrosis in patients receiving implant boost.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Structural and physical properties of 1:2 B-site-ordered perovskite Ba{sub 3}CaIr{sub 2}O{sub 9}

The high-pressure phase of iridium-based compound Ba{sub 3}CaIr{sub 2}O{sub 9} was synthesized using high-pressure sintering. Being different from the distorted hexagonal BaTiO{sub 3} structure of the ambient Ba{sub 3}CaIr{sub 2}O{sub 9}, the high-pressure phase crystals into the 1:2 B-site-ordered perovskite structure with the space group P-3m1 (Z=1). Through fitting the X-ray powder diffraction (XRD) data with Rietveld analysis, in which the obtained R{sub p}, R{sub wp}, and R{sub exp} factors are 7.49%, 11.4%, and 4.82%, respectively, the lattice parameters are a=5.8296(1) A and c=7.1659(2) A. The atomic coordinates and the main interatomic distances and bond angles were also obtained. The relationship of electrical resistivity versus temperature shows that the high-pressure phase of Ba{sub 3}CaIr{sub 2}O{sub 9} is a semiconductor in the temperature range of 5-300 K. The measurement of temperature dependence of magnetic susceptibility indicates that it is paramagnetic. - Graphical Abstract: The high-pressure form of iridium-based perovskite Ba{sub 3}CaIr{sub 2}O{sub 9} crystals into the 1:2 B-site-ordered perovskite-type structure, with the ordered arrangement of Ca and Ir ions in B-site.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Magnetic and electrical properties of quadruple perovskites with 12 layer structures Ba{sub 4}LnM{sub 3}O{sub 12} (Ln=rare earths; M=Ru, Ir): The role of metal-metal bonding in perovskite-related oxides

Structures and magnetic and electrical properties of quadruple perovskites containing rare earths Ba{sub 4}LnM{sub 3}O{sub 12} (Ln=rare earths; M=Ru, Ir) were investigated. They crystallize in the 12L-perovskite-type structure. Three MO{sub 6} octahedra are connected to each other by face-sharing and form a M{sub 3}O{sub 12} trimer. The M{sub 3}O{sub 12} trimers and LnO{sub 6} octahedra are alternately linked by corner-sharing, forming the perovskite-type structure with 12 layers. For Ln=Ce, Pr, and Tb, both the Ln and M ions are in the tetravalent state (Ba{sub 4}Ln{sup 4+}M{sup 4+}{sub 3}O{sub 12}), and for other Ln ions, Ln ions are in the trivalent state and the mean oxidation state of M ions is +4.33 (Ba{sub 4}Ln{sup 3+}M{sup 4.33+}{sub 3}O{sub 12}). All the Ba{sub 4}Ln{sup 3+}Ru{sup 4.33+}{sub 3}O{sub 12} compounds show magnetic ordering at low temperatures, while any of the corresponding iridium-containing compounds Ba{sub 4}Ln{sup 3+}Ir{sup 4.33+}{sub 3}O{sub 12} is paramagnetic down to 1.8 K. Ba{sub 4}Ce{sup 4+}Ir{sup 4+}{sub 3}O{sub 12} orders antiferromagnetically at 10.5 K, while the corresponding ruthenium-containing compound Ba{sub 4}Ce{sup 4+}Ru{sup 4+}{sub 3}O{sub 12} is paramagnetic. These magnetic results were well understood by the magnetic behavior of M{sub 3}O{sub 12}. The effective magnetic moments and the entropy change for the magnetic ordering show that the trimers Ru{sup 4.33+}{sub 3}O{sub 12} and Ir{sup 4+}{sub 3}O{sub 12} have the S=1/2 ground state, and in other cases there is no magnetic contribution from the trimers Ru{sup 4+}{sub 3}O{sub 12} or Ir{sup 4.33+}{sub 3}O{sub 12}. Measurements of the electrical resistivity of Ba{sub 4}LnM{sub 3}O{sub 12} and its analysis show that these compounds demonstrate two-dimensional Mott-variable range hopping behavior. - Graphical abstract: Structures and magnetic and electrical properties of quadruple perovskites containing rare earths Ba{sub 4}LnM{sub 3}O{sub 12} (Ln=rare earths; M = Ru, Ir) were investigated. They crystallize in the 12L-perovskite-type structure. All the Ba{sub 4}Ln{sup 3+}Ru{sup 4.33+}{sub 3}O{sub 12} compounds show magnetic ordering at low temperatures, while any of the corresponding iridium-containing compounds Ba{sub 4}Ln{sup 3+}Ir{sup 4.33+}{sub 3}O{sub 12} is paramagnetic down to 1.8 K. Ba{sub 4}Ce{sup 4+}Ir{sup 4+}{sub 3}O{sub 12} orders antiferromagnetically at 10.5 K, while the corresponding ruthenium-containing compound Ba{sub 4}Ce{sup 4+}Ru{sup 4+}{sub 3}O{sub 12} is paramagnetic. These magnetic results were well understood by the magnetic behavior of M{sub 3}O{sub 12}. The electrical resistivity measurements show that these compounds demonstrate two-dimensional Mott-variable range hopping behavior.

36 MATERIALS SCIENCE↗

Kinetics, stoichiometry, morphology, and current drive capabilities of Ir-based silicides

A detailed study of the formation of iridium silicide obtained by ultrahigh vacuum annealing and atmospheric rapid thermal processing is proposed using x-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM), and electrical characterizations. Using XPS analysis, the stoichiometry of each silicide phase (IrSi, IrSi{sub 1.6}) is identified. A model based on the variation of the measured intensity of the Ir 4f spectra is used to obtain the kinetic coefficients of reaction of Ir silicidation (E{sub A}=2.48 eV, D{sub 0}=9 cm{sup 2}/s). TEM cross sections indicate that the roughness of the silicide/silicon interface increases with temperature. Lastly, electrical characteristics are used to identify the optimum annealing temperature to obtain an iridium silicide contact with the lowest Schottky barrier height to holes.

36 MATERIALS SCIENCE↗

Perovskite-Type Solid Solution Nano-Electrocatalysts Enable Simultaneously Enhanced Activity and Stability for Oxygen Evolution

A trade-off between catalytic activity and structural stability generally exists in oxygen evolution electrocatalysis, especially in acidic environment. This dilemma limits the development of higher-performance electrocatalysts that are required by next-generation electrochemical technologies. In this work it is demonstrated that the inverse catalytic activity–structural stability relation can be broken by alloying catalytically inert strontium zirconate with the other catalytically active perovskite, strontium iridate. This strategy results in an alloyed perovskite electrocatalyst with simultaneously improved iridium mass activity and structural stability, by about five times, for the oxygen evolution reaction under acidic conditions. The experimental and theoretical results suggest that the alloying strategy generates multiple positive effects, mainly including the reduction of catalyst size, the decrease of catalyst covalency, and the weakening of surface oxygen-binding ability. The synergistic optimization of bulk and surface properties, as a result, enhances the intrinsic activity and availability of surface iridium sites, whilst significantly inhibiting the surface cation corrosion during electrocatalysis.

36 MATERIALS SCIENCE↗

Stochastic generation of electrolyzer anode catalyst layers

Here, we introduce a stochastic methodology to reproduce the complex pore structure observed in commercial iridium catalyst layers. This method preserves the α pore (pores smaller than 250 nm) and β pore (pores greater than or equal to 250 nm) regions of the catalyst layer. The morphology of the generated materials was validated by comparing the pore size distributions of generated materials against those obtained from commercial materials imaged using x-ray nano computed tomography. We further demonstrate that the pore size distributions of the generated materials are statistically indistinguishable from the imaged catalyst layers, indicating that the stochastic methodology is capable of accurately reproducing catalyst layer morphology. Pore network modelling was conducted on the generated catalyst materials to simulate single-phase permeability, electrical conductivity, and ionic conductivity, and these properties were found to be within experimentally measured ranges for electrolyzer catalyst layers. Additionally, simulations were performed on the generated materials with varying ionomer and iridium catalyst loadings. As the ionomer loading is added, proton conductivity increases exponentially, which demonstrates the importance of optimizing ionomer loading, considering that these effects will be exacerbated in the hydration and temperature conditions of operating electrolyzers. The stochastic material generation method presented in this work is a powerful tool for the development of novel low loading catalyst layers, where the effect of various structural parameters on electrolyzer performance characteristics can be explored.

36 MATERIALS SCIENCE↗

Patient-Specific Monte Carlo-Based Dose-Kernel Approach for Inverse Planning in Afterloading Brachytherapy

Purpose: Brachytherapy planning software relies on the Task Group report 43 dosimetry formalism. This formalism, based on a water approximation, neglects various heterogeneous materials present during treatment. Various studies have suggested that these heterogeneities should be taken into account to improve the treatment quality. The present study sought to demonstrate the feasibility of incorporating Monte Carlo (MC) dosimetry within an inverse planning algorithm to improve the dose conformity and increase the treatment quality. Methods and Materials: The method was based on precalculated dose kernels in full patient geometries, representing the dose distribution of a brachytherapy source at a single dwell position using MC simulations and the Geant4 toolkit. These dose kernels are used by the inverse planning by simulated annealing tool to produce a fast MC-based plan. A test was performed for an interstitial brachytherapy breast treatment using two different high-dose-rate brachytherapy sources: the microSelectron iridium-192 source and the electronic brachytherapy source Axxent operating at 50 kVp. Results: A research version of the inverse planning by simulated annealing algorithm was combined with MC to provide a method to fully account for the heterogeneities in dose optimization, using the MC method. The effect of the water approximation was found to depend on photon energy, with greater dose attenuation for the lower energies of the Axxent source compared with iridium-192. For the latter, an underdosage of 5.1% for the dose received by 90% of the clinical target volume was found. Conclusion: A new method to optimize afterloading brachytherapy plans that uses MC dosimetric information was developed. Including computed tomography-based information in MC dosimetry in the inverse planning process was shown to take into account the full range of scatter and heterogeneity conditions. This led to significant dose differences compared with the Task Group report 43 approach for the Axxent source.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Metal-rich phosphides RE{sub 5}Ir{sub 19}P{sub 12} with Sc{sub 5}Co{sub 19}P{sub 12} type structure

The iridium-rich phosphides RE{sub 5}Ir{sub 19}P{sub 12} (RE=Sc, Y, La-Nd, Sm-Lu) with Sc{sub 5}Co{sub 19}P{sub 12} type structure, space group P62-bar m were synthesized by solid state reactions of the elements in tantalum crucibles. Well shaped single crystals were obtained in bismuth fluxes. All phosphides were characterized on the basis of X-ray powder data. The structures of RE{sub 5}Ir{sub 19}P{sub 12} with RE=Sc, La, Ce, Dy, Er, Tm, and Yb were refined from single crystal diffractometer data. The complex structure of these phosphides can be described by an intergrowth of simpler ThCr{sub 2}Si{sub 2} and SrPtSb related slabs. Striking structural motifs of the RE{sub 5}Ir{sub 19}P{sub 12} structures are slightly distorted tricapped trigonal prisms of the metal atoms around the phosphorus atoms. The iridium and phosphorus atoms build up three-dimensional [Ir{sub 19}P{sub 12}] polyanionic networks (230-286 pm Ir-P and 282-296 pm Ir-Ir in La{sub 5}Ir{sub 19}P{sub 12}) which leave cavities of coordination numbers 16 and 15 for the rare earth atoms. - Graphical Abstract: The intergrowth structure La{sub 5}Ir{sub 19}P{sub 12}. Highlights: > Metal flux syntheses of intermetallic compounds. > Synthesis and structure of new phosphides RE{sub 5}Ir{sub 19}P{sub 12}. > Crystal chemistry of metal-rich phosphides. > Description of the RE{sub 5}Ir{sub 19}P{sub 12} structure as an intergrowth variant.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Supported Oxygen Evolution Catalysts by Design: Toward Lower Precious Metal Loading and Improved Conductivity in Proton Exchange Membrane Water Electrolyzers

Reducing the precious metal content of water oxidation catalysts for proton-exchange-membrane water electrolyzers remains a critical barrier to their large-scale deployment. Herein, we present an engineered architecture for supported iridium catalysts, which enables decreased precious metal content and improved activity and conductivity. The improvement in performance at lower precious metal loading is realized by the deposition of a conformal layer of platinum nanoparticles on titanium dioxide (TiO 2 ) using a facile photoreduction method to prepare conductive layer coated supports (CCSs). Platinum nanoparticles are homogeneously dispersed on TiO 2 , and the conductivity of the subsequent catalysts with 39 wt % precious group metal loadings is significantly higher than the commercial 75 wt % loaded IrO 2 -TiO 2 catalysts. The conformal conductive layer also maintains an enhanced conductivity and electrochemical activity upon thermal annealing when compared to catalysts without the conductive layer and nonconformal heterogeneous conductive layer. The iridium mass activity from half-cell studies shows a 141% improvement for CCS supported catalysts at 42% lower loadings compared to the commercial catalysts. The conductive layer also improves the single cell electrolyzer performance at a similar catalyst loading in comparison to a commercial state-of-the-art catalyst. Here, we correlate the physical properties of the engineered catalysts with their electrochemical performance in electrolyzers to understand structure-activity relationships, and we anticipate further performance improvements upon synthesis and materials optimizations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Atomic Layer Deposition of Ir−Pt Alloy Films;

Atomic layer deposition (ALD) was used to prepare thin-film mixtures of iridium and platinum. By controlling the ratio between the iridium(III) acetylacetonate/oxygen cycles for Ir ALD and the (trimethyl)methylcyclopentadienyl platinum(IV)/oxygen cycles for Pt ALD, the Ir/Pt ratio in the films could be controlled precisely. We first examined the growth mechanisms for the pure Ir and Pt ALD films, as well as the mixed-metal Ir-Pt ALD films, using in situ quartz crystal microbalance and quadrupole mass spectrometer measurements. These studies revealed that the nucleation and growth of each of the noble metals proceeds smoothly, with negligible perturbation caused by the presence of the other metal. As a consequence of this mutual compatibility, the composition, as well as the growth per cycle for the Ir-Pt films, followed rule-of-mixtures formulas that were based on the ratio of the metal ALD cycles and the growth rates of pure Ir and Pt ALD. X-ray diffraction (XRD) measurements revealed that the films deposit as single-phase alloys in which the lattice parameter varies linearly with the composition. Similar to the pure noble-metal films, the Ir-Pt alloy films grow conformally on high-aspect-ratio trenches. This capability should open up new opportunities in microelectronics, catalysis, and other applications.

36 MATERIALS SCIENCE↗

Near-coincident K-line and K-edge energies as ionization diagnostics for some high atomic number plasmas

For some high atomic number atoms, the energy of the K-edge is tens of eVs higher than the K-line energy of another atom, so that a few eV increase in the line's energy results in a decreasing transmission of the x-ray through a filter of the matching material. The transmission of cold iridium's Asymptotically-Equal-To 63.287 keV K{alpha}{sub 2} line through a lutetium filter is 7% lower when emitted by ionized iridium, consistent with an energy increase of {Delta}{epsilon} Asymptotically-Equal-To 10{+-}1 eV associated with the ionization. Likewise, the transmission of the K{beta}{sub 1} line of ytterbium through a near-coincident K-edge filter changes depending on plasma parameters that should affect the ionization. Systematic exploration of filter-line pairs like these could become a unique tool for diagnostics of suitable high energy density plasmas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Distinguishing triplet energy transfer and trap-assisted recombination in multi-color organic light-emitting diode with an ultrathin phosphorescent emissive layer

An ultrathin layer of deep-red phosphorescent emitter tris(1-phenylisoquinoline) iridium (III) (Ir(piq){sub 3}) is inserted within different positions of the electron blocking layer fac-tris (1-phenylpyrazolato-N,C{sup 2′})-iridium(III) (Ir(ppz){sub 3}) to distinguish the contribution of the emission from the triplet exciton energy transfer/diffusion from the adjacent blue phosphorescent emitter and the trap-assisted recombination from the narrow band-gap emitter itself. The charge trapping effect of the narrow band-gap deep-red emitter which forms a quantum-well-like structure also plays a role in shaping the electroluminescent characteristics of multi-color organic light-emitting diodes. By accurately controlling the position of the ultrathin sensing layer, it is considerably easy to balance the white emission which is quite challenging for full-color devices with multiple emission zones. There is nearly no energy transfer detectable if 7 nm thick Ir(ppz){sub 3} is inserted between the blue phosphorescent emitter and the ultrathin red emitter.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Low loss factor Co{sub 2}Z ferrite composites with equivalent permittivity and permeability for ultra-high frequency applications

Ferrite composites of nominal composition Ba{sub 3}Co{sub 2+x}Ir{sub x}Fe{sub 24−2x}O{sub 41} were studied in order to achieve low magnetic and dielectric losses and equivalent permittivity and permeability over a frequency range of 0.3–1 GHz. Crystallographic structure was characterized by X-ray diffraction, which revealed a Z-type phase accompanied by increasing amounts of Y-type phase as the iridium amount was increased. The measured microwave dielectric and magnetic properties showed that the loss tan δ{sub ε} and loss tan δ{sub μ} decreased by 80% and 90% at 0.8 GHz with the addition of iridium of x = 0.12 and 0.15, respectively. An effective medium approximation was adopted to analyze the composite ferrites having mixed phase structures. Moreover, adding Bi{sub 2}O{sub 3} enabled equivalent values of real permittivity and real permeability over the studied frequency range. The resultant data give rise to low loss factors, i.e., tan δ{sub ε}/ε′ = 0.008 and tan δ{sub μ}/μ′ = 0.037 at 0.8 GHz, while characteristic impedance was the same as that of free space.

36 MATERIALS SCIENCE↗

Mesoporous organosilica nanotubes containing a chelating ligand in their walls

We report the synthesis of organosilica nanotubes containing 2,2′-bipyridine chelating ligands within their walls, employing a single-micelle-templating method. These nanotubes have an average pore diameter of 7.8 nm and lengths of several hundred nanometers. UV-vis absorption spectra and scanning transmission electron microscopy observations of immobilized nanotubes with an iridium complex on the bipyridine ligands showed that the 2,2′-bipyridine groups were homogeneously distributed in the benzene-silica walls. The iridium complex, thus, immobilized on the nanotubes exhibited efficient catalytic activity for water oxidation using Ce{sup 4+}, due to the ready access of reactants to the active sites in the nanotubes.

36 MATERIALS SCIENCE↗

Time-resolved pump and probe x-ray absorption fine structure spectroscopy at beamline P11 at PETRA III

We report about the development and implementation of a new setup for time-resolved X-ray absorption fine structure spectroscopy at beamline P11 utilizing the outstanding source properties of the low-emittance PETRA III synchrotron storage ring in Hamburg. Using a high intensity micrometer-sized X-ray beam in combination with two positional feedback systems, measurements were performed on the transition metal complex fac-Tris[2-phenylpyridinato-C2,N]iridium(III) also referred to as fac-Ir(ppy){sub 3}. This compound is a representative of the phosphorescent iridium(III) complexes, which play an important role in organic light emitting diode (OLED) technology. The experiment could directly prove the anticipated photoinduced charge transfer reaction. Our results further reveal that the temporal resolution of the experiment is limited by the PETRA III X-ray bunch length of ∼103 ps full width at half maximum (FWHM).

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Hydrogen passivation of calcium and magnesium doped β-Ga 2 O 3

Calcium and magnesium doped beta-phase gallium oxide (β-Ga 2 O 3 ) single crystals were Czochralski grown in an iridium crucible and subsequently annealed in hydrogen at ~800° C. IR spectroscopy was used to investigate the roles of Mg and Ca dopants as well as H and Ir impurities. An IR peak at 3492 cm -1 was previously assigned to an O-H bond-stretching mode of a MgH complex in hydrogen-annealed Ga 2 O 3 :Mg and an IR peak at 3541 cm -1 is tentatively assigned to a similar mode in a CaH complex for H annealed Ga 2 O 3 :Ca. An IR peak at 5148 cm -1 is attributed to the presence of Ir 4+ when magnesium is present. Excitation with several different wavelengths used to confirm the position of the Ir level within the band gap. Our results suggest that isolated substitutional Ca dopants are less effective as deep acceptors than Mg. Polarization dependence of the iridium IR spectra is also discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Annual technical progress report of radioisotope power systems materials production and technology program tasks for october 1, 2010 through september 30, 2011

The Office of Space and Defense Power Systems of the Department of Energy (DOE) provides Radioisotope Power Systems (RPS) for applications where conventional power systems are not feasible. For example, radioisotope thermoelectric generators were supplied by the DOE to the National Aeronautics and Space Administration (NASA) for deep space missions including the Cassini Mission launched in October of 1997 to study the planet Saturn. For the Cassini Mission, the Oak Ridge National Laboratory (ORNL) produced carbon-bonded carbon fiber (CBCF) insulator sets, iridium alloy blanks and foil, and clad vent sets (CVS) used in the generators. These components were also produced for the Pluto New Horizons and Mars Science Lab missions launched in January 2006 and November 2011respectively. The ORNL has been involved in developing materials and technology and producing components for the DOE for nearly four decades. This report reflects program guidance from the Office of RPS for fiscal year (FY) 2011. Production activities for prime quality (prime) CBCF insulator sets, iridium alloy blanks and foil, and CVS are summarized in this report. Technology activities are also reported that were conducted to improve the manufacturing processes, characterize materials, or to develop information for new RPS. Work has also been initiated to establish fabrication capabilities for the Light Weight Radioisotope Heater Units.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Development of a low-power, low-cost front end electronics module for large scale distributed neutrino detectors

A number of concepts have been presented for distributed neutrino detectors formed of large numbers of autonomous detectors. Examples include the Antarctic Ross Ice Shelf Antenna Neutrino Array (ARIANNA) [Barwick 2006], as well as proposed radio extensions to the IceCube detector at South Pole Station such as AURA and IceRay. [Besson 2008]. We have focused on key enabling technical developments required by this class of experiments. The radio Cherenkov signal, generated by the Askaryan mechanism [Askaryan 1962, 1965], is impulsive and coherent up to above 1 GHz. In the frequency domain, the impulsive character of the emission results in simultaneous increase of the power detected in multiple frequency bands. This multiband triggering approach has proven fruitful, especially as anthropogenic interference often results from narrowband communications signals. A typical distributed experiment of this type consists of a station responsible for the readout of a cluster of antennas either near the surface of the ice or deployed in boreholes. Each antenna is instrumented with a broadband low-noise amplifier, followed by an array of filters to facilitate multi-band coincidence trigger schemes at the antenna level. The power in each band is detected at the output of each band filter, using either square-law diode detectors or log-power detectors developed for the cellular telephone market. The use of multiple antennas per station allows a local coincidence among antennas to be used as the next stage of the trigger. Station triggers can then be combined into an array trigger by comparing timestamps of triggers among stations and identifying space-time clusters of station triggers. Data from each station is buffered and can be requested from the individual stations when a multi-station coincidence occurs. This approach has been successfully used in distributed experiments such as the Pierre Auger Observatory. [Abraham et al. 2004] We identified the filters as being especially critical. The frequency range of interest, {approx}200 MHz to {approx}1.2 GHz, is a transitional region where the lumped circuit element approach taken at low frequencies begins to reach limitations due to component tolerances, component losses, and parasitic effects. Active circuits can help to mitigate against these effects at the cost of added power consumption that becomes prohibitive for distributed experiments across the band of interest. At higher frequency microstrip, stripline, and other microwave techniques come to the fore. We have developed designs and design tools for passive filters extending the high frequency techniques to the frequency range of interest. Microstrip and stripline techniques are not usually attractive here because of the large physical dimensions of the resulting circuits, but in this application the tradeoff of size against power consumption favors this choice. These techniques are also intrinsically low-cost, as the filter is built into the circuit boards and the cost of components and their assembly onto the board is avoided. The basic element of the filter tree is an impedance matched wideband diplexer. This consists of a pair of low pass and high pass filters with a shared cutoff frequency and complementary frequency responses. These are designing the lowpass filter as a high order LC filter, which can be implemented as a series of transmission line segments of varying width. This can be transformed in to a CL high pass filter with a complementary frequency response. When the two filters are coupled to a common input, the input impedances of the networks add in parallel to give a constant input impedance as a function of frequency, with power flowing into one leg or the other of the filter pair. These filters can be cascaded to divide the band into the frequency ranges of interest; the broadband impedance matching at the inputs makes coupling of successive stages straightforward. These circuits can be produced in quantity at low cost using standard PCB fabrication techniques. We have determined that to achieve best performance the circuits should be built on a low loss-tangent RF substrate. We are working in cooperation with our colleagues in condensed matter who also have a need for this capability to purchase the equipment for in-house fabrication of prototype quantities of these circuits. We plan to continue the work on these filtersusing internal funds, and produce and characterize the performance of prototypes. We also participated in deployment of a prototype detector station near McMurdo Station, Antarctica in collaboration with colleagues at UCLA and UC-Irvine. The prototype station includes a single-board computer, GPS receiver, ADC board, and Iridium satellite modem powered by an omnidirectional solar array. We operated this station in the austral summer of 2006-2007, and used the Iridium SMS mode to transmit the status of the station until the end of the daylight season.

47 OTHER INSTRUMENTATION↗