Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “IMPLANTS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29

Diffusion mechanism and the thermal stability of fluorine ions in GaN after ion implantation

The diffusion mechanisms of fluorine ions in GaN are investigated by means of time-of-flight secondary ion mass spectrometry. Instead of incorporating fluorine ions close to the sample surface by fluorine plasma treatment, fluorine ion implantation with an energy of 180 keV is utilized to implant fluorine ions deep into the GaN bulk, preventing the surface effects from affecting the data analysis. It is found that the diffusion of fluorine ions in GaN is a dynamic process featuring an initial out-diffusion followed by in- diffusion and the final stabilization. A vacancy-assisted diffusion model is proposed to account for the experimental observations, which is also consistent with results on molecular dynamic simulation. Fluorine ions tend to occupy Ga vacancies induced by ion implantation and diffuse to vacancy rich regions. The number of continuous vacancy chains can be significantly reduced by a dynamic thermal annealing process. As a result, strong local confinement and stabilization of fluorine ions can be obtained in GaN crystal, suggesting excellent thermal stability of fluorine ions for device applications.

36 MATERIALS SCIENCE↗

Lattice location study of implanted In in Ge

We report on emission channeling experiments to determine the lattice location and the thermal stability of implanted {sup 111}In atoms in Ge. The majority of the In atoms was found on the substitutional site, which is a thermally stable site at least up to 500 deg. C. We also found strong indication that directly after implantation, a fraction of the implanted {sup 111}In atoms occupies the bond-centered (BC) site. This fraction disappears after annealing at 300 deg. C. From comparison with ab initio calculations, electrical studies, and perturbed angular correlation experiments, the In atoms on the BC site can be related to In-vacancy and In-self-interstitial defect complexes. The activation energy for dissociation of this BC related defect was found to be below 1.6 eV.

36 MATERIALS SCIENCE↗

Patterned Exfoliation of GaAs Based on Masked Helium Implantation and Subsequent Rapid Thermal Annealing

A method of patterning single crystal GaAs based on ion implantation induced selective area exfoliation is suggested. Samples were implanted with 200-500 keV helium ions to a fluence range of 2-4x10{sup 16} He{sup +}/cm{sup 2} at room temperature through masks of Ni mesh (40 {mu}m opening) or stainless steel wire (50 {mu}m in diameter), and subsequent rapid thermal annealing at 350-500{open_square} resulted in expulsion of ion beam exposed material. The influences of ion energy, ion fluence, implantation temperature, subsequent annealing conditions (temperature and ramp rate), and mask pattern and its orientation with GaAs lattice on the patterned exfoliation were examined.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Si{sup +} ion implantation for strain relaxation of pseudomorphic Si{sub 1-x}Ge{sub x}/Si(100) heterostructures

A mechanism of strain relief of pseudomorphic Si{sub 1-x}Ge{sub x}/Si(100) heterostructures by Si{sup +} ion implantation and annealing is proposed and analytically modeled. The degree of strain relaxation is presented as a function of Ge content and implantation and annealing parameters. Rutherford backscattering spectrometry/channeling, Raman spectroscopy, and transmission electron microscopy are employed to quantify the efficiency of the relaxation process and to examine the quality of the samples, respectively. The mechanism and the conditions for strain relaxation are discussed in terms of dislocation loop formation in the implanted range with emphasis on loop formation in the compressively strained SiGe layer. The detrimental effect of local amorphization of the SiGe layer on its relaxation and on strain transfer to the Si-cap layer is also addressed.

36 MATERIALS SCIENCE↗

Plasma sheath physics and dose uniformity in enhanced glow discharge plasma immersion ion implantation and deposition

Based on the multiple-grid particle-in-cell code, an advanced simulation model is established to study the sheath physics and dose uniformity along the sample stage in order to provide the theoretical basis for further improvement of enhanced glow discharge plasma immersion ion implantation and deposition. At t=7.0 mus, the expansion of the sheath in the horizontal direction is hindered by the dielectric cage. The electron focusing effect is demonstrated by this model. Most of the ions at the inside wall of the cage are implanted into the edge of the sample stage and a relatively uniform ion fluence distribution with a large peak is observed at the end. Compared to the results obtained from the previous model, a higher implant fluence and larger area of uniformity are disclosed.

36 MATERIALS SCIENCE↗

Compositional and Structural Study of Gd Implanted ZnO Films

We report a compositional and structural study of ZnO films implanted with 30 keV Gd ions. The depth profile of the implanted ions, measured by Rutherford backscattering spectrometry, matches predictions of DYNAMIC-TRIM calculations. However, after annealing at temperatures above 550 deg. C the Gd ions are observed to migrate towards the bulk, and at the same time atomic force microscope images of the film surfaces show significant roughening. Raman spectroscopy shows that the annealed films have a reduced number of crystalline defects. The overall results are useful for developing an implantation-annealing regime to produce well characterized samples to investigate magnetism in the ZnO:Gd system.

36 MATERIALS SCIENCE↗

PbTe and SnTe quantum dot precipitates in a CdTe matrix fabricated by ion implantation

We present rock-salt IV-VI semiconductor quantum dots fabricated by implantation of Pb{sup +}, Te{sup +}, or Sn{sup +} ions into epitaxial zinc-blende CdTe layers. PbTe and SnTe nanoprecipitates of high structural quality are formed after implantation by thermal annealing due to the immiscibility of dot and matrix materials. For samples implanted only with Pb{sup +}, intense continuous-wave photoluminescence peaked at 1.6 mum at 300 K is found. In contrast, for PbTe quantum dots fabricated by coimplantation of Pb{sup +} and Te{sup +}, the 300 K emission peak is observed at 2.9 mum, indicating luminescence from much larger dots.

36 MATERIALS SCIENCE↗

SnO{sub 2} nanoparticles embedded in silica by ion implantation followed by thermal oxidation

Nanoparticles of tin dioxide embedded in silica matrix were synthesized by ion implanting a Sn{sup +} ion beam in a silica slide and by annealing in oxidizing atmosphere at 800 deg. C. A detailed structural and optical characterization was performed by using glancing incidence x-ray diffraction, transmission electron microscopy, optical absorption, and photoluminescence spectroscopies. Metallic tetragonal beta-tin crystalline nanoparticles were formed in the as-implanted sample. The annealing in oxidizing atmosphere promotes the total oxidation of the tin nanoparticles with a preferential migration of the nanoparticles toward the surface of the matrix. A broad blue-violet emission band peaked at 388 nm was observed in the photoluminescence spectra of both the as-implanted and annealed samples, which was attributed to the Sn-related oxygen deficiency center defects and the SnO{sub 2} nanoparticles, respectively.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Caborane beam from ITEP Bernas ion source for semiconductor implanters

A joint research and development of steady state intense boron ion sources for hundreds of electron-volt ion implanters has been in progress for the past 5 years. The difficulties of extraction and transportation of low energy boron beams can be solved by implanting clusters of boron atoms. In Institute for Theoretical and Experimental Physics (ITEP) the Bernas ion source successfully generated the beam of decaborane ions. The carborane (C{sub 2}B{sub 10}H{sub 12}) ion beam is more attractive material due to its better thermal stability. The results of carborane ion beam generation are presented. The result of the beam implantation into the silicon wafer is presented as well.

43 PARTICLE ACCELERATORS↗

Size saturation in low energy ion beam synthesized nanoparticles in silica glass: 50 keV Ag{sup -} ions implantation, a case study

Fluence-dependent formation of Ag nanoparticles (NPs) in silica glass by 50 keV Ag{sup -} ions implantation has been studied. Samples implanted with fluences of 2x10{sup 16} ions cm{sup -2} and above are found to show an absorption band at around 410 nm, corresponding to the surface plasmon resonance (SPR) of the Ag NPs in silica glass. An increase in SPR peak intensity with increase in fluence has been observed up to a fluence of 7x10{sup 16} ions cm{sup -2} (F7), after which the absorption intensity shows a saturation. Simulations of the optical absorption spectra also indicated an increase in the absorption intensity and hence the size of the NPs with increase in fluence up to F7, beyond which NP size is seen to saturate. The saturation of fluence and the SPR intensity (or NP size) have been explained as coming due to a break up of larger Ag NPs formed near the surface by displacement spikes induced by subsequently incident Ag ions against their regrowth from the movement of Ag atoms toward the surface and their sputtering loss. Further, we have compared our observations with the earlier data on saturation of fluence and size of NPs in cases of Au and Zn, and concluded that the saturation of both fluence and NP size are general phenomena for low energy high fluence metal ion implantation.

36 MATERIALS SCIENCE↗

Structural and Optical Properties Studies Of Ar{sup 2+} Ion Implanted Mn Deposited GaAs

Mn thin film deposited GaAs samples were implanted with 250 keV Ar{sup +2} ions for various fluences 5x10{sup 15}, 1x10{sup 16} and 5x10{sup 16} ions cm{sup -2}. Optical and structural properties of the samples have been investigated by using ultraviolet spectroscopy and X-ray diffraction techniques. Optical absorbance of the implanted samples was found to decrease with increase in argon ion fluence. XRD spectra of the samples implanted for ion fluences 5x10{sup 15} and 1x10{sup 16} showed the formation of (GaMn)As at 2{theta} value of 65.34 deg. The XRD spectrum of sample 1x10{sup 16} cm{sup -2} annealed at 450 deg. C showed the formation of magnetic phases.

36 MATERIALS SCIENCE↗

Microwave Annealing of Ion Implanted 4H-SiC

Ultra-fast high-temperature microwave annealing at temperatures as high as 2050 deg. C for 30 s has been performed on phosphorus ion-implanted 4H-SiC for phosphorus doping concentrations in the range 5x10{sup 19} cm{sup -3}-8x10{sup 20} cm{sup -3}. For comparison, inductive heating furnace anneals were performed at 1800 deg. C-1950 deg. C for 5 min. Electrical resistivity of the P{sup +}-implanted samples decreased with increasing annealing temperature reaching a minimum value of 6.8x10{sup -4} {Omega}cm for 2050 deg. C/30 s microwave annealing and a slightly higher value for 1950 deg. C/5 min inductive heating furnace annealing. X-ray rocking curve measurements showed that the microwave annealing not only removed the lattice damage introduced by the ion-implantation process, but also the defects present in the original virgin sample as well.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of Helium implantation on gettering and electrical properties of 4H-SiC epilayers

This paper tests the gettering ability of sites created by He implantation in 4H-SiC while heating the sample or not, and their impact on carrier lifetime. The spatial distribution of implantation-induced defects (cavities, stacking faults and dislocations) is studied by transmission electron microscopy (TEM) and is compared to gold profiles performed by Rutherford Backscattering (RBS) in samples intentionally contaminated with gold. Minority carrier lifetimes are also measured with a specific set-up based on microwave photoconductivity decay ({mu}-PCD). Though gold atoms do not seem to be efficiently trapped by cavities, the presence of dislocations is of major importance to monitor gold diffusion. Indeed, they can double both its level and its diffusion length in the bulk. Gold is assumed to diffuse faster along dislocation cores. Besides, the implantation-related defects are found to improve the carrier lifetime in the material, but the role of He{sup 2+} left in cavities remains to be investigated.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Simultaneous Sterilization With Surface Modification Of Plastic Bottle By Plasma-Based Ion Implantation

Dry sterilization of polymeric material is developed. The technique utilizes the plasma-based ion implantation which is same as for surface modification of polymers. Experimental data for sterilization are obtained by using spores of Bacillus subtilis as samples. On the other hand we previously showed that the surface modification enhanced the gas barrier characteristics of plastic bottles. Comparing the implantation conditions for the sterilization experiment with those for the surface modification, we find that both sterilization and surface modification are simultaneously performed in a certain range of implantation conditions. This implies that the present bottling system for plastic vessels will be simplified and streamlined by excluding the toxic peroxide water that has been used in the traditional sterilization processes.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Characteristics of ZnO Wafers Implanted with 60 keV Sn{sup +} Ions at Room Temperature and at 110 K

ZnO wafers implanted with 60 keV Sn{sup +} ions at room temperature (RT) and at 110 K are investigated by means of X-ray diffraction (XRD) and photoluminescence (PL) techniques. The effect of implantation temperature is evident in the XRD and PL data. A yellow-orange (YO) band near 600 nm appears in the PL spectra of the ZnO wafers implanted to the doses of 4x10{sup 14} and 8x10{sup 14} ions/cm{sup 2} at RT. The intensity of this band increases and the peak position blue-shifts after illumination of the samples with the 325 nm line of a He-Cd laser. The PL data suggests that the CB (conduction band){yields}V{sub O}{sup +} and Zn{sub i}{sup +{yields}}V{sub Zn}{sup -} transitions contribute to the photoemission of the YO band.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Development of Medium Current Ion Implanter ''IMPHEAT'' for SiC

High productivity medium current ion implanter 'IMPHEAT' was developed for a commercial silicon carbide (SiC) device production. The beamline concept of IMPHEAT is the same as Nissin's ion implanter EXCEED 9600A for silicon device manufacturing. To meet the implantation process for SiC device fabrication, a new type ion source that can produce aluminum (Al) ion beam and a high temperature platen have been developed and installed. The maximum beam currents are 1 mA of Al{sup +}, 400 e{mu}A of Al{sup 2+} and 10 e{mu}A of Al{sup 3+}, and the time variation for these beam currents is less than {+-}10% per hour. The high-temperature platen can handle from 2 to 6 inch wafers. The wafer temperature reaches 600 deg. C for a 6 inch wafer and 500 deg. C for smaller size wafers by using the wafer holder. We have carried out the qualification test and the performance was confirmed as enough for commercial production of SiC devices.

43 PARTICLE ACCELERATORS↗

Use of Xenon Difluoride to Clean Hazardous By-Products in Ion Implanter Source Housings, Turbo Pumps, and Fore-Lines

This paper describes the use of xenon difluoride to clean deposits in the source housing, source turbo pump, and source turbo pump fore-line of ion implanters. Xenon difluoride has previously been shown to be effective in increasing the lifetime of the ion source{sup 1,2} and this paper presents an extension of the technology to other areas within the tool. Process by-products that are deposited in the source housing, turbo pump, and turbo pump fore-line can not only pose productivity issues, in the case of coatings on insulators, but can also be flammable and toxic in the case of deposits formed within the turbo pump and fore-line. The results presented in this paper detail the initial successful examples of using xenon difluoride to clean these deposits.ATMI has shown that xenon difluoride is capable of cleaning an insulator in an ion implanter. Typically during use an insulator will become increasingly coated with deposits that could lead to productivity problems. By introducing xenon difluoride into the source housing the insulator residues were effectively cleaned in-situ, thereby extending the maintenance interval and resulting in significant consumable savings.Similar deposits that form in the turbo pump and fore-line could not only lead to production problems due to turbo pump failure or fore-line build-up, but pose significant health risks during the ex-situ cleaning process. Through internal testing ATMI has shown that xenon difluoride is able to clean phosphorus and germanium deposits located within a turbo pump. Additionally, testing has demonstrated that the turbo pump fore-line can be cleaned in-situ without the need to remove these components, thereby virtually eliminating the possibility of fires. The cleaning reaction progress and by-products were monitored using FTIR spectrometry and thermocouples.In order to efficiently clean the source housing, turbo pump, and turbo pump fore-line xenon difluoride delivery must be optimized. This paper also details a hardware concept that maximizes xenon difluoride delivery and allows the clean to be done in a way that is viable for production ion implanters.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Oxygen-Atom Defects In 6H Silicon Carbide Implanted Using 24- MeV O{sup 3+} Ions Measured Using Three-Dimensional Positron Annihilation Spectroscopy System (3DPASS)

Three dimensional electron-positron (e{sup -}-e{sup +}) momentum distributions were measured for single crystal 6H silicon carbide (SiC); both virgin and having implanted oxygen-atom defects. 6H SiC samples were irradiated by 24- MeV O{sup 3+} ions at 20 particle-nanoamps at the Sandia National Laboratory's Ion Beam Facility. O{sup 3+} ions were implanted 10.8 {mu}m deep normal to the (0001) face of one side of the SiC samples. During positron annihilation measurements, the opposite face of the 254.0-{mu}m thick SiC samples was exposed to positrons from a {sup 22}Na source. This technique reduced the influence on the momentum measurements of vacancy-type defects resulting from knock-on damage by the O{sup 3+} ions. A three-dimensional positron annihilation spectroscopy system (3DPASS) was used to measure e{sup -}-e{sup +} momentum distributions for virgin and irradiated 6H SiC crystal both before and following annealing. 3DPASS simultaneously measures coincident Doppler-broadening (DBAR) and angular correlation of annihilation radiation (ACAR) spectra. DBAR ratio plots and 2D ACAR spectra are presented. Changes in the momentum anisotropies relative to crystal orientation observed in 2D ACAR spectra for annealed O-implanted SiC agree with the local structure of defect distortion predicted using Surface Integrated Molecular Orbital/Molecular Mechanics (SIMOMM). Oxygen atoms insert between Si and C atoms increasing their separation by 0.9 A forming a Si-O-C bond angle of {approx}150 deg.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗