Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ILs”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Performance Assessment of a Dual-purpose HP-TES for a Typical Year Comparing Different Climate Zones

Complete electrification of heating and cooling systems in the United States would overload the existing electrical grid. To this end, recent research efforts have focused on energy storage as one way to reduce ever-increasing peak electricity demands. One such technology is heat pump integrated thermal-energy storage (HP-TES) systems, which can enable load-shifting and reduce demand during peak hours. In this work, a Modelica model of a 4-Ton, dual-mode (heating and cooling) HP-TES system using a room-temperature phase-change material (PCM) integrated through a secondary hydronic loop was developed and simulated for a typical meteorological year in Riverside, CA (ASHRAE Climate Zone 2B), and Chicago, IL (ASHRAE Climate Zone 5A), for a DOE small office prototype building. The COP improvement and demand reduction were analyzed during the time-of-use peak hours along with the required recharge cycle energy demand. A typical summer in Riverside, CA resulted in model-predicted peak COP increases of 50 – 100% compared to the baseline heat pump, especially at higher outdoor temperatures, coupled with maximum peak energy reductions of 22%. During shoulder and winter season simulations, heating energy savings were higher as outdoor temperatures dropped below the PCM phase change temperature. For Chicago, IL, backup heating was necessary to meet the required system capacity for very cold ambient conditions, resulting in winter peak energy savings between 16 – 60% when accounting for backup heating requirements. The recharge energy was found to be mostly below the baseline HP energy during the peak. With improved component selections and controls, the recharge energy may be reduced. The outcomes from the simulations can provide first-order estimates for potential peak energy savings, challenges, and required controls in any location before conducting any field testing.

25 ENERGY STORAGE↗
DOE OSTI2024

Method of adjusting the pH of a pretreatment solution using carbon dioxide useful for integrating saccharification and fermentation of a biomass

The present invention provides for a method of fermenting or saccharifying a biomass comprising: (a) (i) contacting a biomass comprising a polysaccharide, and an ionic liquid (IL) to form a first solution, or (ii) providing the first solution comprising the biomass and the IL, (b) contacting the first solution and carbon dioxide such that the first solution results in a lower pH, (c) introducing (i) an enzyme capable of enzymatically to breakdown at least one bond in the polysaccharide or a breakdown product of the polysaccharide, and/or (ii) a microorganism that capable of producing the enzyme and/or fermenting the polysaccharide or a breakdown product of the polysaccharide, such that the polysaccharide is at least partially broken down and the first solution is transformed into a second solution.

Sun, Jian↗
DOE OSTI2026

Unlocking plant-microbial interactions in deep Mollisols in the Midwestern US: Linking depth gradients in roots, microbial activity, and soil carbon in agroecosystems

Deep-rooted plants may build soil carbon (C) stocks, but most research has focused on shallow soils, leaving gaps in our understanding of how shifts in the balance between decomposition and C inputs drive soil C accumulation with depth. Thus, our objectives were to: (1) link depth gradients in root biomass with microbial activity and soil C stocks down to 1 m, and (2) examine the potential of simple C inputs to prime soil C across depths. To this end, we dug 5 quantitative soil pits in Argiudolls under mature perennial miscanthus plots in the SoyFACE Farm (Champaign-Urbana, IL). We added 13 C labeled glucose to our soils to determine the fate of simple C inputs with depth. We found that fine root biomass, total soil C, mineral-associated organic C (MAOC), particulate organic C (POC), and microbial activity (as measured by potential enzyme activity) declined with depth. POC declined more rapidly than MAOC, resulting in an increase in the ratio of MAOC-to-POC. Root biomass, enzyme activity (either acid phosphatase or n-acetyl-glucosaminadase) activity, and microbial respiration explained 74% and 38% of the variability in soil total C and MAOC, respectively, while POC was dependent on root biomass and microbial respiration (47%). Although the incorporation of simple 13 C inputs into MAOC was similar across depths, these inputs led to greater net MAOC losses in shallow soils than in deeper soils between 50 and 100 cm. The divergent impact of simple C inputs across depths may suggest that MAOC in shallow soils is more susceptible to priming losses, while C inputs into deep soils may instead be more persistent. Collectively, our results suggest that depth gradients in soil C stocks represents a balance between inputs, decomposition, and microbial necromass production and that increases in root C inputs by deep-rooted plants may have the potential to build stable MAOC.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2025

Soil fertility management for sustainable Miscanthus × giganteus production: Increased tiller weight from nitrogen management explains yield gains in aged miscanthus

Aging-related yield decline in Miscanthus × giganteus (miscanthus) remains a major constraint to sustainable biomass production. This study evaluated how nitrogen (N) management and soil fertility influence yield-component traits and productivity in aging miscanthus. Trials were conducted at two sites established in 2008 at the University of Illinois Energy Farm, Urbana, IL. (i) The Sun Grant trial received 0, 60, and 120 kg N ha −1 annually until 2015. Starting 2021, half of each plot received 60 or 120 kg N ha −1 , resulting in six legacy-contemporary treatments: 0N–0N, 0N–120N, 60N–0N, 60N–60N, 120N–0N, 120N–120N. (ii) The Energy Farm trial remained unfertilized until 2014, when one half of each plot received 56 kg N ha −1 , forming two treatments: 0N–0N, 0N–56N. Sun Grant trial results showed N fertilization increased tiller density (tillers m −2 ) and tiller weight (g tiller −1 ) in juvenile to early-mature miscanthus (2011–2015). After N withdrawal, both traits declined (20 % and 40 %), though legacy effects persisted in tiller weight in the aging stands (2020–2023). Contemporary N had little effect on tiller density but increased tiller weight by 34 %–77 %, resulting in 23 %–106 % higher machine-harvested biomass yield in 0–120N, 60-60N, and 120-120N plots. At the Energy Farm trial, 0N–56N plots yielded 59 %–108 % more biomass than 0N–0N. Soil total N increased (Sun Grant: 47 % by 2020; Energy Farm: 58 % by 2023), while Mehlich-3 P (42 %–44 %) and K (21 %–46 %) declined. These findings identify tiller weight as a key determinant of biomass yield in aging miscanthus and highlight the need for P and K management for long-term productivity.

09 BIOMASS FUELS↗
DOE OSTI2026

Trends and limits of CO 2 capture in solid and liquid sorbents at standard conditions

Carbon capture and storage (CCS) plays a critical role in achieving climate change mitigation targets, offering a pathway to decarbonize power generation, industrial processes, and heat production while addressing atmospheric CO 2 removal. While CCS technologies are technically advanced, the widespread adoption of 100 % CO 2 capture capacities such as 1 mol of CO 2 /mol of material and 1 g CO 2 /g storage (targeted by the DARPA, Defense Sciences Office, USA Govt.) has raised questions about the feasibility of achieving higher capture capacities. In the context of limiting global warming to 1.5°C, reaching 100 % CO 2 capture capacity is increasingly necessary, with residual emissions requiring complementary carbon dioxide removal (CDR) technologies. This review exclusively focuses on the CO 2 capture capacities of various sorbents under standard conditions, using different evaluation metrics. This study explores the performance of solid and liquid sorbents under standard conditions, analyzing factors including surface area, pore structure, solvent type, and functionalization to identify materials optimized for industrial-scale CCS applications. Emerging sorbents, including ILs, MOFs, COFs, POPs, DES, RCC, hybrid materials, and reactive sorbents, offer significant potential for enhanced selectivity and energy-efficient regeneration. Through a systematic assessment of gravimetric, volumetric, and molar capacities, the study provides insights into material efficiencies and trade-offs, offering guidance on optimizing sorbent selection for specific applications. The research advances understanding of scalable CCS technologies, contributing to global efforts to achieve net-zero emissions and address the pressing challenge of climate change.

Absorption↗
DOE OSTI2025

Application of Advanced Materials Processing to Enable Direct Production of Fast Reactor Fuel Alloys

Argonne National Laboratory (the Contractor), located in Lemont, IL, and Oklo, Inc. (the Participant), headquartered in Sunnyvale, CA, entered into a Cooperative Research and Development Agreement (CRADA) to integrate advanced electrorefining co-deposition and molten-salt monitoring technologies to produce a uranium-transuranic (U/TRU) alloy within a controlled composition range that can be used as fast reactor fuel for Oklo, Inc.’s advanced reactor technology. Argonne performed the integration of electrorefining and process monitoring technologies, determined operating parameters for producing U/TRU alloys, and developed optimized design and operating parameters for co-deposition of U/TRU alloys. Oklo, Inc. worked with Argonne and the Nuclear Regulatory Commission (NRC) to provide the necessary process documentation to begin implementing pyroprocessing technology in the fast reactor fuel production process. Outcomes of this project included a pilot-scale co-deposition cathode design and technical basis for the operation of the co-deposition electrorefiner to produce U/TRU alloys with controlled composition.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2025

Data for "Field-scale Evaluation of Ecosystem Service Benefits of Bioenergy Switchgrass"

Purpose-grown perennial herbaceous species are nonfood crops specifically cultivated for bioenergy production and have the potential to secure bioenergy feedstock resources while enhancing ecosystem services. This study assessed soil greenhouse gas emissions (CO2 and N2O), nitrate (NO3-N) leaching reduction potential, evapotranspiration (ET), and water-use efficiency (WUE) of bioenergy switchgrass ( Panicum virgatum L.) in comparison to corn ( Zea mays L.). The study was conducted on field-scale plots in Urbana, IL, during the 2020–2022 growing seasons. Switchgrass was established in 2020 and urea-fertilized at 56 kg N ha−1 year−1. Corn management followed best management practices for the US Midwest, including no-till and 202 kg N ha−1 year−1 fertilization, applied as urea–ammonium nitrate (32%). Our results showed lower direct N2O emissions in switchgrass compared to corn. Although soil CO2 emissions did not differ significantly during the establishment year, emissions in subsequent years were over 50% higher in switchgrass than in corn, likely due to increased belowground biomass, which was over five times higher in switchgrass. Nitrate-N leaching decreased as the switchgrass stand matured, reaching 80% lower than in corn by the third year. Differences in ET and WUE between corn and switchgrass were not significant; however, results indicate a trend toward reduced WUE in switchgrass under drought, driven by lower aboveground biomass production. Our study demonstrates that switchgrass can be implemented at a commercial scale without negatively impacting the hydrological cycle, while potentially reducing N losses through nitrate-N leaching and soil N2O emissions, and enhancing belowground C storage.

field data↗
DOE OSTI2025

Oklo Sponsored Testing using PELICAN: System, Subchannel, and High-Fidelity Software Validation (Final CRADA Report)

Argonne National Laboratory (the Contractor), located in Lemont IL, and Oklo, Inc., (the Participant), headquartered in Santa Clara, CA, propose to enter into a Cooperative Research and Development Agreement (CRADA) to perform a gap analysis of thermal hydraulic data, perform prototypical fuel assembly pressure drop and cavitation model validation, generate the experimental data as well as the corresponding uncertainties for this matrix and, finally, develop the validation models with the Argonne system level code SAS4A/SASSYS-1, the Argonne subchannel analysis code DASSH, the Argonne high fidelity code Nek5000, and/or the Idaho National Laboratory code Pronghorn Subchannel. The work outlined below will significantly improve the experimental and validation database currently available for liquid metal fast reactors, thus making it a viable part of a comprehensive reactor design and licensing suite to be used by the participant.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2024

Reassessing early-age strength development of high-volume fly ash concretes for precast buildings

Increasing beneficial use of fresh or landfilled fly ash as a replacement for Portland cement can be more challenging for the construction of precast buildings or similar applications requiring rapid strength development. Therefore, the framework presented in this paper aims to reassess high-volume fly ash concretes but in the context of facilitating more sustainable precast buildings. More specifically, the framework was used to characterize strength development of concrete mixes with a target minimum 24-hour compressive strength of 24.1 MPa (3500 psi), selected as an example strength development metric to demonstrate the framework, and comprised of 40% Class C, Class F, and landfilled (harvested) fly ash – as a high-volume replacement of Type III or Type IL cement. High-early strength was driven by optimized dosages of commercial grade gypsum and accelerating admixtures, in addition to optimal aggregate packing and mix proportioning strategies. Early-age mechanical properties including compressive strength, modulus of rupture, and modulus of elasticity were reevaluated within 24 hours of batching with respect to common precast production demands. Simple data analyses were then used to highlight cases where currently accepted design provisions for the aforementioned properties are either overly-conservative or unconservative with respect to test data. Furthermore, the framework and demonstration of example mixes presented herein aim to promote confidence for using larger fractions of fresh or landfilled fly ashes for precast buildings to further enhance environmental benefits without sacrificing pertinent early-age structural performance.

42 ENGINEERING↗
DOE OSTI2026

Curation and Dissemination of Complex Multi-Modal Datasets for Radiation Detection, Localization, and Tracking

The PANDAWN sensor network in Chicago, IL, is a state-of-the-art testbed for networked, multi-modal sensing. It integrates AI/data science methods into its operation, from data acquisition to automated data labeling and curation workflows. The curation and dissemination of diverse multi-modal datasets will enable the development of new radiological/nuclear (R/N) detection, localization, and tracking algorithms and methods relevant across the nonproliferation mission space. This article first introduces the PANDAWN sensor network and the features that make it stand out from previous multi-modal data acquisition efforts. We then review the various data streams acquired on the PANDAWN nodes and present the implementation of an automated data curation pipeline that includes the labeling of radiation and contextual data streams. Here, we finally provide a short overview of different studies that leveraged the curated datasets.

Data curation↗
DOE OSTI2025

Fluidized Bed Gasification For Conversion of Biomass and Waste Materials to Renewable Hydrogen

This project was undertaken in order to study the potential for hydrogen production, at low cost, from mixtures of biomass and municipal solid waste (MSW). This approach allows for the production of hydrogen with a very low fossil carbon burden, while taking advantage of tipping fees (associated with MSW) to improved process economics. The team sourced three primary feedstocks (wood, MSW, and waste plastics) and characterized them comprehensively using established techniques with a long track record in the field of gasification. All three primary feedstocks were highly reactive and lost most of their mass during initial devolatilization. The production of tars, including heavy tars, was quite high, and was most problematic in the case of the MSW and Waste Plastics feedstocks. Little practical difference was identified between the MSW and Waste Plastics materials, and the addition of bed-forming materials (dolomite and brown alumina) to the feedstocks was found to reduce production of tars during devolatilization under thermogravimetric analysis and/or Fischer Assay conditions. A series of four tests in a lab-scale bubbling-fluidized-bed gasifier, at 50 psig of pressure and about 825 C, confirmed these findings. Pellet feedstocks, broken into fragments, were used for these tests, and pellets comprised of 50% MSW and 50% biomass were found to be the best option in terms of fossil carbon burden, economic potential, and gasification characteristics. Tests were then undertaken in a pilot-scale gasifier facility based on the GTI U-Gas fluidized-bed gasification technology. The feedstock handling train of the 20 TPD U-Gas pilot-scale gasifier located in Des Plaines, IL, was operated under simulated gasification conditions, and the 50/50 pellets were found to be very robust and unproblematic. An improved design for the forward end of the feedstock injection screw of the gasifier was developed and installed. The design approach was based on improved passive cooling of the front-most shroud at the end of the screw, since this approach was found in comprehensive modeling studies to be more than sufficient to accomplish the project objectives associated with this phase of the work, while also avoiding thermal gradients that could have caused heat-stress-induced damage to the refractory around the feedstock inlet if an active cooling approach had been applied. Careful technoeconomic analysis (TEA) of two possible 1000 TPD facilities was carried out. The TEA of conversion of MSW with corn stover in one case, and MSW with woody feedstock in the other case, showed that both had the potential to provide hydrogen at about $1/kg (minimum selling price, 2018 dollar basis). Of the two TEA cases, the one that was based on the conversion of wood in the southeastern USA was found to have slightly better economic potential. The other TEA case was based on a real location in Nebraska and called for corn stover feedstock conversion along with MSW. An underserved communities outreach program plan was developed in cooperation with personnel from the Nebraska Public Power District.

08 HYDROGEN↗
DOE OSTI2024

Reduction of Chemokine CXCL9 Expression by Omega-3 Fatty Acids via ADP-Ribosylhydrolase ARH3 in MIN6 Insulin-Producing Cells

Type 1 diabetes (T1D) results from the autoimmune destruction of the insulin-producing β cells of the pancreas. Omega-3 fatty acids protect β cells and reduce the incidence of T1D, but the mechanism is poorly understood. We have shown that omega-3 fatty acids reduce pro-inflammatory cytokine-mediated β-cell apoptosis by upregulating the expression of the ADP-ribosylhydrolase ARH3. Here, we further investigate the β-cell protection mechanism of ARH3 by performing siRNA analysis of its gene Adprhl2 in MIN6 insulin-producing cells, subsequent treatment with a cocktail of the pro-inflammatory cytokines IL-1β + IFN-γ + TNF-α, followed by proteomics analysis. ARH3 regulated proteins from several pathways related to the nucleus (splicing, RNA surveillance, and nucleocytoplasmic transport), mitochondria (metabolic pathways), and endoplasmic reticulum (protein folding). ARH3 also regulated the levels of proteins related to antigen processing and presentation, and the chemokine-signaling pathway. We further studied the role of ARH3 in regulating the chemokine CXCL9. We found that ARH3 reduces the cytokine-induced expression of CXCL9, which is dependent on omega-3 fatty acids. In conclusion, we demonstrate that omega-3 fatty acids regulate CXCL9 expression via ARH3, which may have a role in protecting β cells from immune attack thereby preventing T1D development.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

A hybrid chemical-biological approach can upcycle mixed plastic waste with reduced cost and carbon footprint

Derived from renewable feedstocks, such as biomass, polylactic acid (PLA) is considered a more environmentally friendly plastic than conventional petroleum-based polyethylene terephthalate (PET). However, PLA must still be recycled, and its growing popularity and mixture with PET plastics at the disposal stage poses a cross-contamination threat in existing recycling facilities and results in low-value and low-quality recycled products. Hybrid upcycling has been proposed as a promising sustainable solution for mixed plastic waste, but its techno-economic and life cycle environmental performance remain understudied. We propose a hybrid upcycling approach using a biocompatible ionic liquid (IL) to first chemically depolymerize plastics and then convert the depolymerized stream via biological upgrading with no extra separation. Here we show that over 95% of mixed PET/PLA was depolymerized into the respective monomers, which then served as the sole carbon source for the growth of Pseudomonas putida, enabling the conversion of the depolymerized plastics into biodegradable polyhydroxyalkanoates (PHAs). In comparison to conventional commercial PHAs, the estimated optimal production cost and carbon footprint are reduced by 62% and 29%, respectively.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Mobility Hubs: Workforce Landscape Assessment, Development Opportunities, and Local Transportation Planning

Through the U.S. Department of Energy's Energy to Communities (E2C) program, NLR, other national laboratory experts, and select organizations provide Expert Match - free, short-term technical assistance to address near-term energy challenges and questions. Expert Match is for community stakeholders who have decision-making power or influence in their community but need access to additional energy expertise to inform key upcoming decisions. This Expert Match request supported Equticity in Chicago, IL with an analysis workforce development considerations and opportunities and is intended to support decision-making on micromobility initiatives.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2026

Structure and Dynamics of Imidazolium in an Ionic Liquid-PEGDA Iongel via IR, 2D-IR, and NMR Spectroscopy

Fourier transform infrared (FTIR) absorption spectroscopy, ultrafast two-dimensional infrared (2D-IR) spectroscopy, nuclear magnetic resonance (NMR) spectroscopy, and density functional theory (DFT) calculations show that, in iongels composed of 1-ethyl-3-methylimidazolium bis(trifluoromethyl\-sulfonyl)imide ([C 2 C 1 Im][Tf 2 N]}) and cross-linked poly(ethylene glycol)diacrylate (cl-PEGDA), imidazolium cations solvate PEGDA chains in tight and loose complexes. H/D isotope substitution at the 2-position of the imidazolium ring simplifies the CH-stretching vibrational bands. Tight complexes are characterized by stronger, directional hydrogen bonding interactions between the 2-position of the imidazolium ring and the ethereal oxygens. The loose complexes resemble bulk ionic liquid (IL) non-specifically perturbed by the PEGDA chains.

ionic liquids, carbon dioxide, cross-linked PEGDA,↗
DOE OSTI2022

In silico evaluation of plant nitrification suppression effects on agroecosystem nitrogen loss

Abstract Nitrification regulates the potential for nitrogen (N) loss from ecosystems because it converts ammonium to nitrate, which is susceptible to leaching and gaseous emissions. Crops can suppress the microbes that perform nitrification by exuding nitrification‐inhibiting compounds from their roots and taking up available ammonium. However, the effect of nitrification suppression on agroecosystem N losses remains poorly characterized, and a lack of temporal synchrony between nitrification, N losses, and nitrification suppression by plants could limit the effect of nitrification suppression. We used the DayCent‐CABBI model to evaluate the effectiveness of the suppression of nitrification by sorghum to reduce N 2 O emissions and nitrate leaching in an energy sorghum/soybean rotation at the Energy Farm in Urbana‐Champaign, IL. We simulated nitrification suppression at the measured levels (MeasNS) and at the maximum measured level applied to the entire growing season (MaxNS), and we also explored ways to better utilize nitrification suppression by altering the timing of urea–ammonium–nitrate fertilizer applications. Model experiments showed that most nitrification occurred immediately after fertilizer was applied, whereas nitrification suppression began to ramp up more than a month after planting. On an annual basis, MeasNS experiments showed a 1%–2% reduction in annual N 2 O emissions relative to no nitrification suppression (NoNS), and MaxNS experiments showed a 4%–9% reduction in annual N 2 O emissions relative to NoNS. Both nitrification suppression levels showed <1% reduction in nitrate leaching. Altering the timing of fertilizer applications to better synchronize nitrification suppression with high soil ammonium levels had mixed effects on annual N 2 O emissions and nitrate leaching and sometimes resulted in increased N losses. The timing of simulated N 2 O emissions shifted with the timing of fertilization, and N 2 O emissions from denitrification increased when N 2 O emissions from nitrification decreased. Increasing N retention during the non‐growing season may be more effective than growing‐season nitrification suppression for reducing annual N losses in the rainfed Midwest.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2020

Chemical composition of cold‐pressed blackberry seed flour extract and its potential health‐beneficial properties

Abstract The blackberry seed flour was cold‐extracted using 50% acetone and examined for its phytochemical composition and health‐beneficial properties including in vitro gut microbiota modulatory, free radical scavenging, anti‐inflammatory, and antiproliferative capacities. Among identified thirteen components of blackberry seed flour extract through UHPLC‐MS analysis, sanguiin H6 was the primary component and followed by ellagic acid and pedunculagin. For health‐beneficial properties, the blackberry seed flour extract increased the total number of gut bacteria and shifted the abundance of specific bacterial phylum, family, or genus. The extract had RDSC, ORAC, HOSC, and ABTS •+ scavenging capacities of 362, 304, 2,531, and 267 μmol Trolox equivalents (TE)/g, respectively. In addition, the blackberry seed flour extract showed capacities for anti‐inflammation and antiproliferation by suppressing LPS induced IL‐1β mRNA expressions in the cultured J774A.1 mouse macrophages and the proliferation of LNCaP prostate cancer cells. The results suggest potential health benefits and further utilization of blackberry seed flour as functional foods.

Choe, Uyory↗
DOE OSTI2025

Evaluation of Density-Functional Tight-Binding Methods for Simulation of Protic Molecular Ion Pairs

In this work, we benchmark the accuracy of the density-functional tight-binding (DFTB) method, namely the long-range corrected second-order (LC-DFTB2) and third-order (DFTB3) models, for predicting energetics of imidazolium-based ionic liquid (IL) ion pairs. We compare the DFTB models against popular density functionals such as LC-ωPBE and B3LYP, using ab initio domain-based local pair-natural orbital coupled cluster (DLPNO-CC) energies as reference. Calculations were carried out in the gas phase, as well as in aqueous solution using implicit solvent methods. We find that the LC-DFTB2 model shows excellent performance in the gas phase and agrees well with reference energies in implicit solvent, often outperforming DFTB3 predictions for complexation energetics. Our study identifies a range of opportunities for use of the LC-DFTB method and quantifies its sensitivity to protonation states and the types of chemical interactions between ion pairs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗