Results for “I:C” — Page 29

NASA NTRS2012

GOT C+ Survey of [CII] 158 Micrometer Emission: Atomic to Molecular Cloud Transitions in the Inner Galaxy

We present the results of the distribution of CO-dark H2 gas in a sample of 2200 interstellar clouds in the inner Galaxy (l = 90 deg to +57 deg) detected in the velocity resolved [CII] spectra observed in the GOT C+ survey using the Herschel HIFI. We analyze the [CII] intensities along with the ancillary HI, (12)CO and (13)CO data for each cloud to determine their evolutionary state and to derive the H2 column densities in the C(+) and C(+)/CO transition layers in the cloud. We discuss the overall Galactic distribution of the [CII] clouds and their properties as a function Galactic radius. GOT C+ results on the global distribution of [CII] clouds and CO-dark H2 gas traces the FUV and star formation rates in the Galactic disk.

structure↗

NASA NTRS2015

SiLix-C Nanocomposites

For this Phase II project, Superior Graphite Co., in collaboration with the Georgia Institute of Technology and Streamline Nanotechnologies, Inc., developed, explored the properties of, and demonstrated the enhanced capabilities of novel nanostructured SiLix-C anodes. These anodes can retain high capacity at a rapid 2-hour discharge rate and at 0 C when used in Li-ion batteries. In Phase I, these advanced anode materials had specific capacity in excess of 1,000 mAh/g, minimal irreversible capacity losses, and stable performance for 20 cycles at C/1. The goals in Phase II were to develop and apply a variety of novel nanomaterials, fine-tune the properties of composite particles at the nanoscale, optimize the composition of the anodes, and select appropriate binder and electrolytes. In order to achieve a breakthrough in power characteristics of Li-ion batteries, the team developed new nanostructured SiLix-C anode materials to offer up to 1,200 mAh/g at C/2 at 0 C.

Henry, Francois↗

NASA NTRS2017

Prolonged 500 C Operation of 100+ Transistor Silicon Carbide Integrated Circuits

This report describes more than 5000 hours of successful 500 C operation of semiconductor integrated circuits (ICs) with more than 100 transistors. Multiple packaged chips with two different 4H-SiC junction field effect transistor (JFET) technology demonstrator circuits have surpassed thousands of hours of oven-testing at 500 C. After 100 hours of 500 C burn-in, the circuits (except for 2 failures) exhibit less than 10 change in output characteristics for the remainder of 500C testing. We also describe the observation of important differences in IC materials durability when subjected to the first nine constituents of Venus-surface atmosphere at 9.4 MPa and 460C in comparison to what is observed for Earth-atmosphere oven testing at 500 C.

Silicon Carbid↗

NASA NTRS2010

Observations on the State of NASA's GN&C Engineering Discipline: Results of an Independent Non-Advocate Study

The NASA Technical Fellows periodically conduct State-of-the-Discipline assessments. The GN&C Technical Fellow contracted Harlan Brown & Company in 2007 and 2009 to conduct independent, third party studies to gain unbiased insight and understanding into the attitudes and beliefs of NASA's GN&C Community of Practice (CoP). The paper first outlines the background, objectives and methodology of the studies. The paper then summarizes key study results of the 2007 baseline study, as well as the 2009 update. The update was then used to track and monitor perceptions, identify performance trends, identify areas where further improvement needs to be made in NASA's GN&C discipline. It also generated feedback on the recently developed GN&C CoP online knowledge capture and learning site.

Pawlikowski, Gerald J.↗

NASA NTRS2018

Yearlong 500 C Operational Demonstration of Up-Scaled 4H-SiC JFET Integrated Circuits

This work describes recent progress in the design, processing, and testing of significantly up-scaled 500 C durable 4H-SiC junction field effect transistor (JFET) integrated circuit (IC) technology with two-level interconnect undergoing development at NASA Glenn Research Center. For the first time, stable electrical operation of semiconductor ICs for over one year at 500 C in air atmosphere is reported. These groundbreaking durability results were attained on two-level interconnect JFET demonstration ICs with 175 or more transistors on each chip. This corresponds to a more than 7-fold increase in 500 C-durable circuit complexity from the 24 transistor ring oscillator ICs reported at HiTEC 2016. These results advance the technology foundation for realizing long-term durable 500 C ICs with increased functional capability for combustion engine sensing and control, planetary exploration, deep-well drilling monitoring, and other harsh-environment applications.

Silicon carbides↗

NASA NTRS2017

Knowledge Base for Distributed Spacecraft Mission Design Using the Trade-Space Analysis Tool for Constellations (TAT-C)

Opportunities for multi-point measurements, greater revisit frequency, failure robustness, and improved cost effectiveness motivate consideration of Distributed Spacecraft Missions (DSMs) for future Earth science missions. However, careful analysis is required to assess the distributed sensing capabilities of a constellation compared to more mature monolithic spacecraft while also considering other important dimensions such as cost and risk. The large combinatorial DSM design space limits existing mission analysis tools and exploration methods which emphasize monolithic design variables. The Trade-space Analysis Tool for Constellations (TAT-C) under development at Goddard seeks to enumerate and evaluate alternative mission architectures to minimize cost and maximize scientific return for pre-defined goals during pre-phase A analysis.Similar to other model-centric engineering efforts, efficient data management is a significant challenge for DSM mission analysis. In TAT-C, a Knowledge Base (KB) is envisioned as a cumulative central repository of information and meta-information about DSMs. Initial KB concepts store related data for reuse within or across mission analyses; however, over time, the KB is envisioned to be an important layer to coordinate actions of both human analysts and automated design agents to search a large design space for desirable mission alternatives. Preliminary KB research builds on a modern web technology stack to provide the following functionality: 1) storage of trade-space search requests which set requirements and constraints for DSM concepts, 2) storage of analysis results which quantify performance metrics for evaluated DSM concepts, 3) a RESTful application programming interface (API) for scripted access to data from TAT-C modules, 4) web-based graphical user interface (GUI) for manual access to underlying data, and 5) access control and management restrictions relevant to data protection and security. These efforts have culminated in a prototype KB used by the research team during TAT-C development to assess opportunities for future work.

Pattern Recognition↗

NASA NTRS2016

TAT-C: A Trade-Space Analysis Tool for Constellations

Under a changing technological and economic environment, there is growing interest in implementing future NASA Earth Science missions as Distributed Spacecraft Missions (DSM). The objective of our project is to provide a framework that facilitates DSM Pre-Phase A investigations and optimizes DSM designs with respect to a-priori Science goals. In this first version of our Trade-space Analysis Tool for Constellations (TAT-C), we are investigating questions such as: Which type of constellations should be chosen? How many spacecraft should be included in the constellation? Which design has the best costrisk value? This paper describes the overall architecture of TAT-C including: a User Interface (UI) interacting with multiple users - scientists, missions designers or program managers; an Executive Driver gathering requirements from UI and formulating Trade-space Search Requests for the Trade-space Search Iterator, which in collaboration with the Orbit Coverage, Reduction Metrics, and Cost Risk modules generates multiple potential architectures and their associated characteristics. UI will include Graphical, Command Line and Application Programmer Interfaces to respond to the demands of various levels of users expertise. Science inputs are grouped into various mission concepts, satellite specifications, and payload specifications, while science outputs are grouped into several types of metrics - spatial, temporal, angular and radiometric. Orbit Coverage leverages the use of the Goddard Mission Analysis Tool (GMAT) to compute coverage and ancillary data that are passed to Reduction Metrics. Then, for each architecture design, Cost Risk will provide estimates of the cost and life cycle cost as well as technical and cost risk of the proposed mission. Additionally, the Knowledge Base module is a centralized store of structured data readable by humans and machines. It will support both TAT-C analysis when composing new mission concepts from existing model inputs, and TAT-C exploration when discovering new mission concepts by querying previous results.

Science Data Processing↗

NASA NTRS2019

Characterization of Silicon Carbide Pressure Sensors at 800 °C

We have performed the initial characterization of single crystal 4H silicon carbide (4H-SiC) pressure sensors to determine the operational reliability over time at 800 °C. Important parameters such as the zero pressure offset, bridge resistance, and pressure sensitivity as they are affected by temperature were extracted. These parameters showed relative stability within the prescribed operational envelop of the sensor at 800 °C. Of significance is the increase in pressure sensitivity with increasing temperature beyond 400 °C, to the extent that the sensitivity at 800 °C was higher than the room temperature value. The implication of this result is that the sensor can be inserted further into the high temperature environment, thereby capturing the wider bandwidth of the pressure transients than currently possible.

Okojie, Robert S.↗

NASA NTRSDate not supplied

Alternative Setup for Long-Duration Low-Duty-Cycle 600°C Ambient Testing of SiC Integrated Circuits

A scalable, compact oven testbed system for simultaneously evaluating a multitude of high temperature integrated circuits (ICs) for prolonged operating times of up to 600 °C has been prototyped. The new testbed system enables long-duration high temperature testing in sufficient statistical quantities consistent with standard aerospace electronics engineering standards. This setup is comprised of multiple compact ovens housing chips or packages mounted to ceramic circuit boards. Each oven is a compact 15.2 cm length by 15.2 cm width by 12.7 cm depth with a maximum 400 Watts of heating power. The custom-made silicon oxide ceramic heating block inside each oven is based on a 3D printed design adapted for the easy insertion of the IC device under test (DUT). This innovative design provides the quick insertion of ICs with or without a ceramic package into a 600 °C environment by utilizing a movable 11.43 cm long ceramic substrate with electrical traces extending from the oven hot zone to external standard plastic-based board connectors. Another key oven design feature is the minimization of the DUT exposure to electromagnetic interference (EMI) by utilizing a filtered DC power source to reduce heating element noise. Additionally, the ovens can be configured in a parallel arrangement allowing global data monitoring over a single industrial RS422 serial port. This feature is important for scaling up to test multiple ICs semi-simultaneously. A USB serial port is provided to independently control the operating parameters of each oven such as the oven target temperature and oven ramp rate. The oven temperature can reach up to 600 °C with a confirmed +/- 4 °C maximum deviation across the test zone region. The ramp rate can be programmed from 1 °C/minute up to 10 °C/minute. Furthermore, a programmable switchboard is used to interface with the DUT. This switchboard comprises a National Instruments Peripheral Component Interconnect eXtension for Instrumentation (NI PXI) system and a breakout board to send and receive power, analog or digital test signals. By using this unique oven testbed system, a variety of ICs can now be tested in parallel using the same test components configured for a diverse set of requirements.

DC Powered Oven↗

NASA NTRSDate not supplied

NESC GN&C TDT Workshop on 2D Image Motion Optical Transfer Functions, Pointing Performance Analysis, and Requirements

This course was prepared by the author in support of the NASA GN&C Technical Discipline Team (TDT). The purpose of this two-day course is to inform practicing GN&C engineers, and other system and subsystem engineers, including payload engineers and mission analysts, of methodologies to analyze the pointing performance of spacecraft and to write unambiguous pointing requirements that are relevant to optical payload performance. It is hoped that the seminar will contribute to a best-practices manual and contribute to accepted and uniform means of requirements definition, validation, and verification. The course material is designed to address the needs of not only practicing GN&C engineers, but also system and subsystem engineers of other disciplines, payload engineers, mission analysts, and even astronomers who need to understand how they interface to a GN&C subsystem. Much revision is the direct result of active student participation during the presentations and from feedback obtained through course evaluation forms.

2D Image↗

NASA NTRS2019

Highly Accurate Quartic Force Field and Rovibrational Spectroscopic Constants for the Azirinyl Cation (c-C2NH2+) and Its Isomers

Azirinyl cation is an aromatic cyclic molecule that is isoelectronic with cyclopropenylidene, c-C3H2, and c-C3H3+. Cyclopropenylidene has been shown to be ubiquitous, existing in many different astrophysical environments. Given the similar chemistry between C and N, and the relative abundances between C and N in astrophysical environments, it is expected that there should be aromatic ringed molecules that incorporate N in the ring, but as yet, no such molecule has been identified. To address this issue, the present study uses high levels of electronic structure theory to compute a highly accurate quartic force field (QFF) for azirinyl cation and its two lowest lying isomers, the cyanomethyl and isocyanomethyl cations. The theoretical approach uses the singles and doubles coupled-cluster method that includes a perturbative correction for connected triple excitations, CCSD(T), together with extrapolation to the one-particle basis set limit and corrections for scalar relativity and core-correlation. The QFF is then used in a second order vibrational perturbation theory analysis (VPT2) to compute the fundamental vibrational frequencies and rovibrational spectroscopic constants for all three C2NH2+ isomers. The reliability of the VPT2 vibrational frequencies is tested by comparison to vibrational configuration interaction (VCI) calculations and excellent agreement is found between the two approaches. Fundamental vibrational frequencies and rovibrational spectroscopic constants for all singly substituted 13C, 15N, and D isotopologues are also reported. It is expected that the highly accurate spectroscopic data reported herein will be useful in the identification of these cations in high resolution experimental or astronomical observations.

Partha P Bera↗

NASA NTRS2023

Development of Two High-Energy Bus ‘Cores’ for Rapid Support of Low-TRL and Educational Payloads: A Software-Configured EPS Combined with Flexible C&DH

For several years the TechEdSat flight series (TES-n), developed by the Nano Orbital Workshop (NOW) group at NASA Ames, has relied upon an in-house developed unit to serve both EPS (Electrical Power System) and C&DH (Command and Data Handling) roles along with low data-rate telemetry functions, i.e., serving as the ‘core’ of the spacecraft bus. This ‘core’ has a considerable task given the rapid cadence of the TES program and the typically low-TRL of payloads; configurability and compatibility are key to prevent mission-specific hardware. However, at only 15 watts the current core has become insufficient to support the program’s growing missions and increasingly demanding payloads. To this end, the NOW program is developing new cores to support two TES mission classes: a single-PCB ‘MiniCore’ designed to support 80-watt missions 6U or smaller in LEO, and a three-PCB, radiation-tolerant ‘StackCore’ designed to support 6U and larger missions over 500 watts in LEO and beyond. The ‘MiniCore’ design consists of three main segments: a processor-agnostic C&DH, a software-configured EPS, and a backup low data-rate radio. The design philosophy was to enable rapid-manufacture in a turbulent supply chain, hence the design consists of COTS parts with a focus on those able to be drop-in replaced with radiation-tolerant versions when demanded by the mission. As a single PC-104 sized circuit board, power density and ease of integration also dominated design, demanding the use of modern features such as single-point USB-C for easy charging and monitoring of the spacecraft on the ground. The ‘MiniCore’ can support 80 watts of load, 140 watt-hours of storage, and over 20 watts of optimized solar generation with extensive power monitoring throughout. The ‘MiniCore’ supports one battery pack, six solar-panels, six loads, five actuators, Iridium SBD, and an internal 802.15.4 network. Additionally, the processor-agnostic design can accept any PJRC Teensy 3.x or Adafruit Feather microcontroller unit to enable processor scaling with mission requirements or environment. It is expected a development unit of this design will be completed before conference. The ‘StackCore’ design consists of three stacked PC-104 sized circuit boards: one dedicated to power generation and storage, one dedicated to power distribution, and one dedicated to C&DH tasks. This delineation is necessary to support the transition from highly integrated ICs to discrete analog circuitry, enabling a primarily analog control power system able to operate without software in a radiation environment with finer monitoring compared to the ‘MiniCore’ design. The planned base architecture supports over 500 watts of load, 250 watt-hours of storage, and over 80 watts of optimized solar generation. The power distribution board allows for the use of daughter cards hosting custom converters or interfaces for payloads, in addition to the software-configured supplies used on the ‘MiniCore’. This core stack will be managed by a Vorago ARM M4 microcontroller and support the same wireless communications as the ‘MiniCore’, with optional integration of a NOW S-band radio and attitude determination sensors for ‘black box’ functionality. It is expected the prototype will still be in development during conference.

Spacecraft↗

NASA NTRSDate not supplied

Development of Two High-Energy Bus ‘Cores’ for Rapid Support of Low-TRL and Educational Payloads: A Software-Configured EPS Combined with Flexible C&DH

For several years the TechEdSat flight series (TES-n), developed by the Nano Orbital Workshop (NOW) group at NASA Ames, has relied upon an in-house developed unit to serve both EPS (Electrical Power System) and C&DH (Command and Data Handling) roles along with low data-rate telemetry functions, i.e., serving as the ‘core’ of the spacecraft bus. This ‘core’ has a considerable task given the rapid cadence of the TES program and the typically low-TRL of payloads; configurability and compatibility are key to prevent mission-specific hardware. However, at only 15 watts the current core has become insufficient to support the program’s growing missions and increasingly demanding payloads. To this end, the NOW program is developing new cores to support two TES mission classes: a single-PCB ‘MiniCore’ designed to support 80-watt missions 6U or smaller in LEO, and a three-PCB, radiation-tolerant ‘StackCore’ designed to support 6U and larger missions over 500 watts in LEO and beyond. The ‘MiniCore’ design consists of three main segments: a processor-agnostic C&DH, a software-configured EPS, and a backup low data-rate radio. The design philosophy was to enable rapid-manufacture in a turbulent supply chain, hence the design consists of COTS parts with a focus on those able to be drop-in replaced with radiation-tolerant versions when demanded by the mission. As a single PC-104 sized circuit board, power density and ease of integration also dominated design, demanding the use of modern features such as single-point USB-C for easy charging and monitoring of the spacecraft on the ground. The ‘MiniCore’ can support 80 watts of load, 140 watt-hours of storage, and over 20 watts of optimized solar generation with extensive power monitoring throughout. The ‘MiniCore’ supports one battery pack, six solar-panels, six loads, five actuators, Iridium SBD, and an internal 802.15.4 network. Additionally, the processor-agnostic design can accept any PJRC Teensy 3.x or Adafruit Feather microcontroller unit to enable processor scaling with mission requirements or environment. It is expected a development unit of this design will be completed before conference. The ‘StackCore’ design consists of three stacked PC-104 sized circuit boards: one dedicated to power generation and storage, one dedicated to power distribution, and one dedicated to C&DH tasks. This delineation is necessary to support the transition from highly integrated ICs to discrete analog circuitry, enabling a primarily analog control power system able to operate without software in a radiation environment with finer monitoring compared to the ‘MiniCore’ design. The planned base architecture supports over 500 watts of load, 250 watt-hours of storage, and over 80 watts of optimized solar generation. The power distribution board allows for the use of daughter cards hosting custom converters or interfaces for payloads, in addition to the software-configured supplies used on the ‘MiniCore’. This core stack will be managed by a Vorago ARM M4 microcontroller and support the same wireless communications as the ‘MiniCore’, with optional integration of a NOW S-band radio and attitude determination sensors for ‘black box’ functionality. It is expected the prototype will still be in development during conference.

Spacecraft↗

NASA NTRSDate not supplied

A new template for developing C++ applications in NASA's Core Flight System

In this presentation, we will demonstrate an example Core Flight System (cFS) application written in C++, compatible with the Draco releases of the Core Flight Executive (cFE) and NASA Operating System Abstraction Layer (OSAL). The application boilerplate, supporting library, and associated generation script were recently developed and licensed under the permissive Apache License 2.0 with the goal of easing the cFS app development with C++. The design and features of this application will be presented, including a higher-level interface for interactions with the cFE software bus pipes, tables, and event services. Data structures are provided for centralized telecommand and telemetry parsing which isolates bookkeeping of message components from the calling code in an application's core logic. Specific advantages of writing a cFS application in C++ will be shown, including easier avoidance of symbol collisions via namespaces, expanded compile-time checks via constant expressions, default initialization for data structures, null safety via references, improved syntax for operating on multi-dimensional arrays, and reliable serialization of enumerations via enumeration classes. Special considerations needed for integrating a C++ application will be identified, including function linkage, exceptions, and stack unwinding. Evidence for the usefulness of this template will be discussed in the context of development of a flight software application used for interfacing with a solid-state data recorder.

Dominick Allen↗

NASA NTRS1974

The C-12/C-13 ratio in comet Kohoutek /1973f/

Results are presented for photoelectric scans of the C sub 2 1 to 0 band head at 4737 A at resolutions of 0.14 to 0.50 A in the comet Kohoutek. On the basis of medium-resolution scans and of one high-resolution scan two values are obtained for the C-12/C-13 ratio which are consistent within the experimental errors with the terrestrial values of C-12/C-13 equal to 89. The study also demonstrates the limitations imposed by NH2 blends.

Danks, A. C.↗

NASA NTRS1977

Oxidation in oxygen at 900 deg and 1000 deg C of four nickel-base cast superalloys: NASA-TRW VIA, B-1900, alloy 713C, and IN-738

The oxidation at 900 and 1,000 C of four nickel-base superalloys in 1 atmosphere of slowly flowing oxygen was investigated. Thermogravimetric rate data were obtained for periods to 100 hours. The morphology and composition of the oxide scales formed after 100 hours were studied by optical microscopy, X-ray diffraction, electron microprobe, scanning electron microscopy, and X-ray photoelectron spectroscopy (ESCA). Alloys B-1900 and VIA were found to be primarily alumina formers, though probably 25 percent of their surface was covered by CR2O3-containing oxides at 900 C. Alloys 713C and IN-738 were primarily chromia formers, though the surface of 713C at 1,000 C was covered with NiO, and the surface of IN-738 at both temperatures was covered with a thin layer of TiO2.

Fryburg, G. C.↗

NASA NTRS1990

Laser surface interactions of high-T(sub c) superconductors

During the past two years, one of the most exciting research fields in science has been the study of the newly discovered high-T(sub c) metal oxide superconductors. Although many theoretical models were proposed, there is no general agreement on any theory to explain these materials. One of the peculiar features of these high-T(sub c) materials is the noninteger number of oxygen atoms. The oxygen content is extremely critical to the superconductive properties. Take YBa2Cu3O(7-x) as an example. Its superconductive properties disappear whenever x is larger than 0.5. The existence of Cu(+ 3) was considered to account for x less than 0.5. However, results from mass spectroscopy of laser desorbed species indicate that significant quantities of oxygen molecules are trapped in the bulk of these high-T(sub c) superconductors. It appears that these trapped oxygen molecules may play key roles in superconductive properties. Preparation of superconductive thin films are considered very important for the applications of these new superconductors for the electronics industry. Fluorescence spectra and ion spectra following laser ablation of high-temperature superconductors were obtained. A real time monitor for preparation of superconductive thin films can possibly be developed.

Chen, C. H.↗

NASA NTRS1989

Electron cyclotron resonance deposition of a-Si:H and a-C:H films

Amorphous silicon (a-Si:H) and amorphous carbon (a-C:H) films have been deposited by electron cyclotron resonance (ECR) microwave plasma enhanced CVD. A high deposition rate of 25 A/sec and a light-to-dark conductivity ratio of 500,000 for a-Si:H films have been achieved by the ECR process using a pure silane plasma. ECR microwave plasmas have been analyzed by in situ optical emission spectroscopy (OES) and have shown a strong H-asterisk emission at 434 nm indicating higher chemical reactivity than RF plasmas. The linear correlation between the film deposition rate and the SiH-asterisk emission intensity of ECR silane plasma suggests that SiH-asterisk species are related to the neutral radicals which are responsible for the a-Si:H film deposition. Hard and soft a-C:H films have been deposited by ECR with and without RF bias power, respectively. The RF bias to the substrate is found to play a critical role in determining the film structure and the carbon bonding configuration of ECR deposited a-C:H films. Raman spectra of these films indicate that ECR deposition conditions can be optimized to produce diamond films.

Shing, Y. H.↗