SEARCH · Engineering Papers

Results for “Hydrolysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29

All sources NASA NTRS DOE OSTI

DOE OSTI2025

Initiator‐Driven Tailoring of Reactivity and Inhibition in Frontally Polymerized Dicyclopentadiene‐Co‐Dihydrofuran Thermosets

Incorporating 2,3‐dihydrofuran (DHF) into dicyclopentadiene (DCPD) enables frontally polymerizable, deconstructible thermosets via acid hydrolysis. At 5–20 mol% DHF and low initiator concentration (~100 ppm), DHF inhibits front propagation, lowers the glass transition temperature ( T g ) by up to 20°C, and quenches the front, especially at 20% DHF. This paper demonstrates that increasing the initiator concentration to 250–1000 ppm overcomes inhibition, enhances front speeds by ~50%, and suppresses quenching at the expense of pot‐life. Above 5 mol% DHF, an emergence of a second exotherm is observed, attributed to increased rate dependence on the inhibition of the initiator by DHF. Void formation from volatile DHF is suppressed by applying 110 kPa nitrogen, though at the cost of reduced front speed. Dynamic mechanical analysis shows that higher initiator concentration produced more highly cross‐linked polymers, with a ~20% increase in storage modulus at 25°C and a 20°C increase in T g .

deconstructible thermosets↗

DOE OSTI2020

Machine learning-based prediction of enzyme substrate scope: Application to bacterial nitrilases

Predicting the range of substrates accepted by an enzyme from its amino acid sequence is challenging. Although sequenc- and structure-based annotation approaches are often accurate for predicting broad categories of substrate specificity, they generally cannot predict which specific molecules will be accepted as substrates for a given enzyme, particularly within a class of closely related molecules. Combining targeted experimental activity data with structural modeling, ligand docking, and physicochemical properties of proteins and ligands with various machine learning models provides complementary information that can lead to accurate predictions of substrate scope for related enzymes. Here we describe such an approach that can predict the substrate scope of bacterial nitrilases, which catalyze the hydrolysis of nitrile compounds to the corresponding carboxylic acids and ammonia. Each of the four machine learning models (logistic regression, random forest, gradient-boosted decision trees, and support vector machines) performed similarly (average ROC = 0.9, average accuracy = ~82%) for predicting substrate scope for this dataset, although random forest offers some advantages. Finally, this approach is intended to be highly modular with respect to physicochemical property calculations and software used for structural modeling and docking.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2025

The Pseudoenzyme β‐Amylase9 From Arabidopsis Activates α‐Amylase3: A Possible Mechanism to Promote Stress‐Induced Starch Degradation

ABSTRACT Starch accumulation in plants provides carbon for nighttime use, for regrowth after periods of dormancy, and for times of stress. Both ɑ‐ and β‐amylases (AMYs and BAMs, respectively) catalyze starch hydrolysis, but their functional roles are unclear. Moreover, the presence of catalytically inactive amylases that show starch excess phenotypes when deleted presents questions on how starch degradation is regulated. Plants lacking one of these catalytically inactive β‐amylases, BAM9, have enhanced starch accumulation when combined with mutations in BAM1 and BAM3, the primary starch degrading BAMs in response to stress and at night, respectively. BAM9 has been reported to be transcriptionally induced by stress although the mechanism for BAM9 function is unclear. From yeast two‐hybrid experiments, we identified the plastid‐localized AMY3 as a potential interaction partner for BAM9. We found that BAM9 interacted with AMY3 in vitro and that BAM9 enhances AMY3 activity about three‐fold. Modeling of the AMY3‐BAM9 complex predicted a previously undescribed alpha–alpha hairpin in AMY3 that could serve as a potential interaction site. Additionally, AMY3 lacking the alpha–alpha hairpin is unaffected by BAM9. Structural analysis of AMY3 showed that it can form a homodimer in solution and that BAM9 appears to replace one of the AMY3 monomers to form a heterodimer. The presence of both BAM9 and AMY3 in many vascular plant lineages, along with model‐based evidence that they heterodimerize, suggests that the interaction is conserved. Collectively these data suggest that BAM9 is a pseudoamylase that activates AMY3 in response to cellular stress, possibly facilitating stress recovery.

Biochemistry & Molecular Biology↗

DOE OSTI2020

Synthesis, aphicidal activity and conformation of novel insect kinin analogues as potential eco‐friendly insecticides

Abstract BACKGROUND The discovery of ecofriendly insecticides through a new strategy for aphid control is important because of the substantial resistance and unexpected eco‐toxicity to honeybees caused by traditional insecticides. The insect kinins, a class of multifunctional insect neuropeptides, are considered for potential application in pest control. In our previous work we developed several series of insect kinin analogues and found a promising lead II‐1 with good aphicidal activity. To seek further eco‐friendly aphicides, the optimization of II‐1 is carried out in this study. RESULTS Fifteen novel Yaa 3 modified analogues based on the lead II‐1 were synthesized. The aphicidal tests indicated that IV‐3 , IV‐5 and IV‐10 exhibited significant activity against the soybean aphid Aphis glycines with LC 50 values of 0.0029, 0.0072 and 0.0086 mmol L –1 , respectively, higher than that of lead II‐1 and the commercial Pymetrozine. The molecular modeling results showed that analogues II‐1 , IV‐3 , IV‐5 , IV‐7 and IV‐10 formed a β‐turn‐like conformation, while the conformation of analogues IV‐1 , IV‐2 and IV‐9 seemed to be linear. Some structural elements favorable for the activity were proposed based on the conformation‐activity relationship of the analogues. CONCLUSION Insect kinin analogues derived from lead II‐1 by modifying the hydrolysis site Yaa 3 with natural, sterically hindered α‐ and β‐amino acids showed great potential as eco‐friendly insecticides. Inspiringly, the most active analogue IV‐3 can be a candidate for further development. The β‐turn‐like conformation and the orientation of the aromatic rings of the side chain of Phe 2 and Trp 4 may be critical factors beneficial to activity. © 2019 Society of Chemical Industry

Zhang, Chuanliang↗

DOE OSTI2023

Acceleration Factors for Combined‐Accelerated Stress Testing of Photovoltaic Modules

Combined‐accelerated stress testing (C‐AST) is developed to establish the durability of photovoltaic (PV) products, including for degradation modes that are not a priori known or examined in standardized tests. C‐AST aims to comprehensively represent the sample, stress factors, and their combinations using levels at the statistical tails of the natural environment. Acceleration factors for relevant climate sequences within the C‐AST cycle with respect to the Florida USA climate are estimated for selected degradation mechanisms. It is found that for degradation of the outer backsheet polymer layer, the acceleration factor of the tropical climate sequence (the longest of the climate sequences) is f ( T , G ) = 17.3 with ultraviolet photodegradation; for polyethylene terephthalate hydrolysis (backsheets), f ( T , RH ) = 426; for electrochemical corrosion (PV cell), f ( I ) = 14.1; and for PbSn solder fatigue f (Δ T , r ( T )) = 17.3. Here, T is the module temperature, G is the broadband spectrum irradiance on the plane of array of the module, RH is the relative humidity on the module surface, I is the leakage current through the module packaging, and r ( T ), the number of temperature reversals. The methods discussed herein are generally applicable for evaluating acceleration factors in other accelerated test methods.

14 SOLAR ENERGY↗

DOE OSTI2021

Thermal stability of filler‐based ethylene/vinyl acetate/vinyl alcohol terpolymer in nitroplasticizer oxidative environment

Abstract To study the thermal stability of ethylene/vinyl acetate/vinyl alcohol (EVA‐OH) composite with filler particles, systematic thermogravimetric analysis (TGA) investigation was conducted in both nonisothermal and isothermal modes. The effect of polymer concentration on the aging behavior of EVA‐OH was investigated in the nitroplasticizer (NP) environment. Fourier transform infrared spectroscopy was used to probe chemical structural changes in the EVA‐OH polymer before and after thermal aging. The results suggest that filler addition accelerates the rate of NP exudation out of the EVA‐OH composites and deteriorates the thermal stability of NP at moderate temperatures (up to 70°C). The degradation of NP, in turn, accelerates the degradation of EVA‐OH polymer in its composite form through oxidation and hydrolysis indicating the importance of antioxidants in such phase blends.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Chapter 3: New Developments on Ionic Liquid-Tolerant Microorganisms Leading Toward a More Sustainable Biorefinery

The growing concerns about climate change and energy security are driving the development of bio-based technologies to produce renewable liquid fuels and chemicals. Ionic liquids (ILs) have demonstrated to be promising solvents to pretreat lignocellulosic residues, promoting efficient enzymatic hydrolysis of lignocellulosic carbohydrates into sugars, which can be further used by microorganisms to produce biofuels and other value-added chemicals. Despite their unique properties to effectively deconstruct plant cell walls, ILs show strong interactions with the pretreated biomass, and their presence is often inhibitory to cellulolytic enzymes and microorganisms. The most advanced biorefinery concepts based on IL pretreatments focus on the development of more biocompatible ILs and more robust microbial strains with higher tolerance to ILs. This chapter provides an overview and a discussion over the main efforts performed on the screening and development of IL-tolerant microbial strains, as well as in more biocompatible IL pretreatment methods. These early research advancements in this field offer a baseline and a platform for future research with the goal of improving the sustainability and economic viability of IL pretreatment-based biorefineries.

bioconversion↗

DOE OSTI2021

High-Biomass Sorghums as a Feedstock for Renewable Fuels and Chemicals

High-biomass sorghums are intended for use in biorefineries that convert vegetative biomass into renewable fuels and chemicals. The majority of plant biomass consists of cell walls, a complex matrix of cellulose, hemicellulosic polysaccharides and lignin. In the biorefinery, the biomass is ground and then subjected to a thermo-chemical pretreatment (elevated temperature, high pressure, chemical catalysts) that disrupts the cell wall matrix and solubilizes some of the cell wall polymers, followed by enzymatic saccharification of the cellulose, which produces D-glucose. The glucose and sometimes also the xylose derived from the hydrolysis of the hemicellulosic polysaccharides, are subsequently converted to fuels or other useful chemicals by microbial biocatalysts. The genetic improvement of high-biomass sorghums has as its ultimate goals to maximize the yield of fermentable sugars on a per-hectare basis, to minimize the inputs of fertilizer, irrigation, fungicides and pesticides and to reduce the environmental footprint. Breeding strategies thus need to target biomass yield, biomass composition, maturity, pest and disease resistance and nutrient use efficiency. Furthermore, this chapter reviews the genetic basis of these traits and their potential application in breeding programs.

60 APPLIED LIFE SCIENCES↗

DOE OSTI2020

Purification and characterization of a native lytic polysaccharide monooxygenase from Thermoascus aurantiacus

Lytic polysaccharide monooxygenases (LPMOs) have emerged as key proteins for depolymerization of cellulose. These copper-containing enzymes oxidize C-1 and/or C-4 bonds in cellulose, promoting increased hydrolysis of the oxidized cellulose chains. The LPMO from Thermoascus aurantiacus, a thermophilic ascomycete fungus, has been extensively studied and has served as a model LPMO. A method was developed to purify the LPMO from culture filtrates of T. aurantiacus along with its native cellobiohydrolase and endoglucanase. The activity of the purified LPMO was measured with a colorimetric assay that established the T opt of the native LPMO at 60 °C. Purification of the components of the T. aurantiacus cellulase mixture also enabled quantification of the amounts of cellobiohydrolase, endoglucanase and LPMO present in the T. aurantiacus culture filtrate, establishing that the LPMO was the most abundant protein in the culture supernatants. Here, the importance of the LPMO to activity of the mixture was demonstrated by saccharifications with Avicel and acid-pretreated corn stover.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2021

Low soil phosphorus availability triggers maize growth stage specific rhizosphere processes leading to mineralization of organic P

Phosphorus (P) is one of the essential nutrients for all living organisms. High-quality mineral P fertilizer is a finite resource with only an estimated 80-100 years of reserves remaining globally. Both plants and microbes have developed several mechanisms such as secretion of organic acids, acidification of the rhizosphere, and production of extracellular enzymes to enhance the acquisition of P from soils. Increased activity of phosphatase occurs in response to P deficiency as part of P starvation responses which catalyze the hydrolysis of P o from soil organic matter (SOM) and release inorganic P (P i ). However, the specific interactions between plants and microbial communities in the rhizosphere soil triggered by P deficiency are largely unknown. In a greenhouse study we grew maize plants in low and high P containing soils and examined the role of rhizosphere processes on mineralization of organic P (P o ) in soils with low and high P availability and different P speciation 23 (Po dominated versus P i dominated) and determine its effect on plant growth. Plant biomass was determined and rhizosphere soils, and soil samples from pots with and without plants were collected at key vegetative growth stages (VGS). A variety of biogeochemical parameters (e.g. microbial biomass C and P, potential phosphatase activities, plant biomass P, soil P species etc.) were determined using both conventional (sequential chemical extraction) and advanced (e.g. high resolution mass spectrometry (FTICR-MS) and 3129 P solution NMR) techniques. Here, we used phospholipid fatty acid (PLFA) and DNA based microbial community analysis to track changes in microbial community structure and diversity. Low P availability induced changes in biogeochemical processes and microbial community composition in the rhizosphere soils of plants grown in low P containing soil. At early VGS, the plants in low P soil were visually struggling which correlated with greater rhizosphere potential acid phosphatase activity and a reduction in P o fractions. At late VGS, the plants appeared to recover which correlated with a decrease in Meh (III) extractable P, an increase in microbial biomass C and P and greater total P in the plant biomass (roots, shoots and leaves). In high P containing soil, on the other hand, greater P availability masked these rhizosphere processes. Our results confirmed the degradation of SOM and Po mineralization in rhizosphere soils driven by microbe and plant need for P. P deficiency may have favored the abundance of fungi which utilized easily degradable root exudates for the production of extracellular enzymes responsible for the mineralize of SOM P o . This study highlights the intertwined mechanisms involved, and emphasizes the importance of, P o sources for plant nutrition and survival in marginal soils.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2026

Deacetylation and Mechanical Refining Pathway for the Bioconversion of Sugarcane Bagasse

Advancing lignocellulose biorefining is imperative for the deployment of cellulosic (2G) biofuels. This work investigates the tailoring of the alkaline deacetylation and mechanical refining (DMR) pathway for the bioconversion of sugarcane bagasse. Experiments are conducted at laboratory and pilot scales, varying the pretreatment conditions (70–92 °C; 48–100 g NaOH /kg) and the mechanical refining technologies (PFI and disk refining). The pretreatments selectively solubilize acetyl groups (> 86%) and lignin (10–63%) while mostly preserving structural carbohydrates in the solid phase. Enzymatic hydrolysis generates hydrolysates of clean sugars (glucose and xylose), with sugar yields increasing up to 81% for glucose and 89% for xylose in response to delignification and mechanical refining. Biochemical methane potential assays reveal specific methane productions of up to 568 NmL CH₄ gVS⁻¹ for alkaline liquor monodigestion and 344 NmL CH₄ gVS⁻¹ for co-digestion with sugarcane vinasse from the conventional (1G) sugarcane ethanol, indicating a strong potential for bioenergy recovery from this process stream. Synergies are identified in integrating 1G ethanol, 2G DMR processing of bagasse, and anaerobic co-digestion of 1G vinasse and 2G DMR alkaline liquor. This technology enables sugarcane biorefineries to enhance the co-production of ethanol, methane, and concentrated streams of CO 2 .

09 BIOMASS FUELS↗

DOE OSTI2020

Evaluation of near-ambient algal biomass fractionation conditions for bioproduct development

This contribution describes an algal fractionation scheme based on cell lysing and carbohydrate hydrolysis under acidic conditions, coupled with solvent extraction, that produces algal lipids, carbohydrates, and proteinaceous solid from partially dewatered algal biomass. Here, a design of experiments analysis was employed to identify the effect of fractionation conditions on the yields of the three product streams. By selection of appropriate conditions, the process can be steered from simple lipid extraction to near complete fractionation of the biomass. Lipid purification and upgrading were respectively achieved with a low-cost adsorbent and an inexpensive Ni-based catalyst that deoxygenated the lipids via decarboxylation/decarbonylation, an approach offering several advantages over the hydrodeoxygenation-based processes typically employed to convert lipids to hydrocarbons. The proteinaceous solids obtained were found to have much lower ash content as well as higher protein content relative to the untreated algae, enhancing the suitability of this material as a feedstock for the production of bioplastics.

09 BIOMASS FUELS↗

DOE OSTI2022

The effects of sequential hydrothermal-mechanical refining pretreatment on cellulose structure changes and sugar recoveries

The recalcitrance of lignocellulosic biomass necessitates an efficient pretreatment protocol for operating a successful cellulosic biorefinery. It is critical to improve cellulose accessibility for hydrolysis and fermentation by altering the plant cell wall’s physical structure and chemical composition. Sequential hydrothermal-mechanical refining pretreatment (HMR) allows efficient recovery of cellulosic sugars without utilizing any hazardous chemicals. HMR has been successfully applied to Liberty switchgrass, a bioenergy cultivar released by the USDA, and now it is being applied to oilcane, a recently developed transgenic sugarcane variety engineered to accumulate lipids in its vegetative tissues. Sugar yields of oilcane bagasse (OCB) and switchgrass (SG) treated with HMR are 96.4% and 75.4%, respectively. This study sought to correlate cellulosic sugar yields with structural changes within the cell wall caused by HMR on two distinct bioenergy crops. Simon’s staining technique for the specific surface area analysis showed that HMR increased the specific surface area of pretreated biomass residues by 80–112%. In addition, ATR-FTIR was performed to determine the effects of HMR on physical structures based on the total crystallinity index (TCI) and hydrogen bonding intensity (HBI). Irrespective of biomass type, HMR decreased the initial crystalline cellulose contents of untreated biomass residues by 3.5% and reduced TCI and HBI by 7–13%. Here, the study found that sugar yields were negatively correlated to reducing values of hydrogen bonding intensity, crystalline cellulose content, and total crystallinity index.

09 BIOMASS FUELS↗

DOE OSTI2020

Peptoid-based hierarchically-structured biomimetic nanomaterials: Synthesis, characterization and applications

Peptoids (or poly-N-substituted glycines) is a promising class of bioinspired sequence-defined polymers due to their highly efficient synthesis, high chemical stability, enzyme hydrolysis resistance, and biocompatibility. By tuning the side chain chemistry of peptoids, it allows for a precise control over sequences and achieving a large side-chain diversity. Due to these unique features, in the last several years, many amphiphilic peptoids were designed as highly tunable building blocks for the preparation of biomimetic nanomaterials with well-defined hierarchical structures and desired functionalities. In this paper, we provide an overview of the recent achievements in this area by dividing them into the following three aspects. First, mica- and silica-templated peptoid self-assembly was summarized. Here, the presence of inorganic substrates provides the guarantee of investigating their self-assembly mechanisms and interactions between peptoids and substrates using nanoscale characterization techniques, particularly in situ atomic force spectroscopy (AFM) and AFM-based dynamic force spectroscopy (AFM-DFS). Second, solution-phase self-assembly of peptoids into nanotubes and nanosheets was presented, as well as their self-repair properties. Third, the applications of peptoid based nanomaterials were outlined, including the construction of catalytic nanomaterials as a template and cytosolic delivery as cargoes.

36 MATERIALS SCIENCE↗

DOE OSTI2025

Structure-dependent mechanisms for plastic degradation in the marine environment

The visible and invisible accumulation of waste plastic in our oceans is a consequence of rapidly increasing inputs and very slow degradation rates. In general, this combination of effects results in long residence times. Nevertheless, the abiological degradation rate of a specific synthetic plastic varies widely, depending on its structural characteristics at the molecular, mesoscopic, and macroscopic levels. This chapter summarizes factors that determine these rates of degradation, and describes their principal mechanisms, for several of the major types of waste plastic found in the oceans. Mechanical forces cause cracking and flaking that break macroplastics into microplastics and even smaller fragments with increasing surface-to-volume ratios. Chemical degradation rates increase with surface area, influenced by intrinsic variations in crystallinity and the presence of additives, as well as extrinsic factors such as temperature, pH, and UV light intensity. Since polyolefin-based plastics are less dense than seawater and lack hydrolysable bonds in their polymer backbones, they accumulate close to the surface of the ocean where photo-oxidation is the principal cause of C–C bond cleavage in the polymer backbone. In contrast, polyesters and polyamides are denser than seawater and they sink, experiencing less exposure to solar irradiation. However, they can also degrade by slow hydrolysis of the C–O or C–N bonds intrinsic to the polymer structures.

Maciulis, Nicholas A.↗

DOE OSTI2021

Determination of affinities of lanthanide-binding proteins using chelator-buffered titrations

The recent discoveries of the first proteins that bind lanthanides as part of their biological function not only are relevant to the emerging field of lanthanide-dependent biology, but also hold promise to revolutionize the technologically critical rare earths industry. Although protocols to assess the thermodynamics of metal–protein interactions are well established for “traditional” metal ions in biology, the characterization of lanthanide-binding proteins presents a challenge to biochemists due to the lanthanides' Lewis acidity, propensity for hydrolysis, and high-affinity complexes with biological ligands. These properties necessitate the preparation of metal stock solutions with very low buffered “free” metal concentrations (e.g., femtomolar to nanomolar) for such determinations. Here in this paper we describe several protocols to overcome these challenges. First, we present standardization methods for the preparation of chelator-buffered solutions of lanthanide ions with easily calculated free metal concentrations. We also describe how these solutions can be used in concert with analytical methods including UV–visible spectrophotometry, circular dichroism spectroscopy, Förster resonance energy transfer (FRET), and sensitized terbium luminescence, in order to accurately determine dissociation constants (K d s) of lanthanide–protein complexes. Finally, we highlight how application of these methods to lanthanide-binding proteins, such as lanmodulin, has yielded insights into selective recognition of lanthanides in biology. We anticipate that these protocols will facilitate discovery and characterization of additional native lanthanide-binding proteins, will motivate the understanding of their biological context, and will prompt their applications in biotechnology.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2022

Calcium silicate hydrate colloid at different humidities: Microstructure, deformation mechanism, and mechanical properties

Calcium silicate hydrate (C-S-H) is the main hydration product of Portland cement, while fundamental questions persist regarding its colloidal structure and water content. In this work, we developed a full atomistic C-S-H colloid model and investigated the physical and mechanical properties at different gel water concentrations. Water confined in nanometer gel pores degrades the mechanical properties of C-S-H because of its hydrolysis effect. A “ductile to brittle” transition was observed in the C-S-H colloid model with increasing gel water contents, evolving from transgranular failure to intergranular fracture. The gel water confined in nanometer-sized pores displays glassy characteristics, and it acts as a lubricant and facilitates structure distortions during the deformation. We elucidated the topology effect of the hydrogen bond network on the evolution of the viscoelasticity of C-S-H at different humidities. In conclusion, this work sheds light on the role of water in C-S-H colloids from nanostructure perspectives.

36 MATERIALS SCIENCE↗

DOE OSTI2025

Identification and overexpression of endogenous transcription factors to enhance lipid accumulation in the biotechnologically relevant species Chlamydomonas pacifica

Sustainable low-carbon energy solutions are critical to mitigating global carbon emissions. Algae-based platforms offer potential by converting carbon dioxide into valuable products while aiding carbon sequestration. However, scaling algae cultivation faces challenges like contamination in outdoor systems. Previously, our lab evolved Chlamydomonas pacifica, an extremophile green alga, which tolerates high temperature, pH, salinity, and light, making it ideal for large-scale bioproduct production, including biodiesel. Here, we enhanced lipid accumulation in evolved C. pacifica by identifying and overexpressing key endogenous transcription factors through genome-wide in-silico analysis and in-vivo testing. These factors include Lipid Remodeling Regulator 1 (CpaLRL1), Nitrogen Response Regulator 1 (CpaNRR1), Compromised Hydrolysis of Triacylglycerols 7 (CpaCHT7), and Phosphorus Starvation Response 1 (CpaPSR1). Under nitrogen deprivation, CpaLRL1, CpaNRR1, and CpaCHT7 overexpression enhanced lipid accumulation compared to wild-type. However, CpaPSR1 increased lipid accumulation compared to wild-type in normal media and did not increase further under nitrogen deprivation, highlighting the difference in function based on media conditions. Notably, lipid analysis of CpaPSR1 under normal media conditions revealed a 2.4-fold increase in triglycerides (TAGs) compared to the wild-type, highlighting its potential for biodiesel production. This approach provides a framework for transcription factor-focused metabolic engineering in algae, advancing bioenergy and biomaterial production.

Biofuels↗