Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Homogenization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29

Additional Trials & Tribulations in Synthesizing a Sulfide Standard

Well-characterized sulfide reference materials that can serve as matrix-matched calibrants for in-situ trace element analyses via laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) remain elusive. Here, we describe the creation an in-house sulfide standard at NASA JSC that will be used to measure siderophile and chalcophile trace elements in low pressure experimental products, specifically pentlandite ([FeNi]9S8) and pyrrhotite ([FeNi]1-xS), as well as natural sulfides in terrestrial and meteoritic mineral assemblages. Recent methods in creating a homogenous sulfide standard include pressed pellets, synthesized chips, or fused glass [e.g. 1-3]. Other studies, however, have had success in forming homogenous FeS standards via synthesization methods [e.g. 4-6]. We present a variation of the method described in [4], in which we create a pyrrhotite standard doped with a variety of trace elements (Zn, As, Se, Mo, Ru, Rh, Pd, Sn, Sb, Te, W, Os, Ir, Pt, Au) at ~10-40 ppm and Cu at ~200 ppm. Sulfide compositions were constructed using Fe and Ni metal and elemental sulfur powders. Trace elements were added to elemental sulfur from Atomic Absorption Spectroscopy (AAS) elemental standards as either nitrate or chloride solutions to prevent oxidation of the metal powders. The dried sulfur mixture was mixed with Fe and Ni powders and mechanically mixed before two aliquots were placed in separate SiO2 tubes. Each tube was held under vacuum for ~30 minutes, sealed under vacuum, and then heated at 800C for 48 hours. Like [4], the synthesis products were composed of pourous sulfide crystals. Major element analyses of both experimental aliquots, collected using an Electron Probe Microanalyser (EPMA), yield indistinguishable major element compositions (uncertainties in 2SE & 2RSE[%]), with an average of 57.90  0.09 (0.16 %), 4.95  0.03 (0.55 %), and 39.70  0.14 (0.34 %), for Fe, Ni, and S, respectively. Trace element data were measured using a Photon Machines 193nm laser ablation system coupled to a Thermo-Scientific Element-XR ICP-MS. Spot sizes were limited to 50 μm due to the porous nature of the sulfide target material. Trace element abundances, normalized to Fe as an internal standard, were also found to be homogenous between the two aliquots, with weighted mean 2RSE (%) values of <3.0 for all trace elements. Synthesized products were re-powdered and absolute concentrations measured via solution ICP-MS. Although the sulfide appears to be homogenous, sintering experiments will be performed to more closely match the standard density to natural sulfides and minimize differences in ablation behavior. Improved density also allows for higher sensitivity (i.e. more compact target material) and larger spot sizes or traverses, as void space is eliminated. Additional major and trace element analyses on the products of the sintering experiments will be undertaken.

Jacob B Setera↗

On fracture phenomena in advanced fiber composite materials.

The extension of linear elastic fracture mechanics (LEFM) from metallic alloys to advanced fiber composite laminates is considered. LEFM is shown to be valid for both isotropic and anisotropic homogeneous continua; the applicability of LEFM to advanced fiber composites is thus dependent on the validity of a homogeneous model of such materials. An experimental program to determine the validity of such a model for graphite/epoxy laminates is reviewed. Such laminates are found to have an apparent fracture toughness, from which it is inferred that a homogeneous material model is valid for the particular specimen geometry and composite laminates considered. Strain energy release rates are calculated from the experimentally determined fracture toughness of the various laminates. These strain energy release rates are found to lie in one of two groups, depending upon whether crack extension required fiber failure or matrix failure. The latter case is further investigated. It is concluded that matrix failure is governed by the tensile stress normal to the crack path.

Konish, H. J., Jr.↗

Preparation of pigments for space-stable thermal control coatings

The identification and control of vapor phase reaction kinetics to produce pigments by homogeneous nucleation were achieved. A vapor phase apparatus was designed, fabricated, and calibrated through 1800 C. Vapor phase reactions were analyzed, calculations made, and powders of alumina, rutile, zinc orthotitanate (in a mixed phase), calcium tungstate, and lanthana were produced by homogeneous nucleation. Electron microscopy shows uniform particle morphology and size, and supports anticipated advantages of vapor-phase homogeneous nucleation; namely, purity, freedom from defects, and uniform particle sizing without grinding.

Campbell, W. B.↗

Mariner 9 ultraviolet spectrometer experiment: Afternoon terminator observations of Mars

It is possible to model the ultraviolet terminator observations of Mariner 9 either with a homogeneous atmosphere or with a scattering layer in addition to a homogeneous atmosphere. The characteristic shape of the twilight intensity variation is dependent on the latitude of observation. Observations north of 55N require a homogeneous model. Twilight measurements south of 55N indicate that a scattering layer may be a general Martian occurrence, at least in the evening. The day-to-day surveillance of the Martian terminator during the first 216 Mariner 9 revolutions indicates haze formation in the evening, and its continued presence until early morning is a daily occurrence in mid-latitudes up to 50N.

Ajello, J. M.↗

Mathematical models for the reflection coefficients of dielectric half-spaces

The reflection coefficients at normal incidence are found for a large class of one-dimensionally inhomogeneous or stratified half-spaces, which contain a homogeneous half-space. The formulation of the problem involves a combination of the classical boundary value technique, and the nonclassical principle of invariant imbedding. Solutions are in closed form and expressible in terms of Bessel functions. All results are given in terms of the ratio of the distance between free space and the homogeneous half-space to the wavelength in vacuo. One special case is that of an arbitrary number of layers lying on a homogeneous half-space where the dielectric constant of each layer has a constant gradient. A number of other special cases, limiting cases, and generalizations are developed including one in which the thickness of the top layer obeys a probability distribution.

Evans, D. D.↗

A new image enhancement algorithm with applications to forestry stand mapping

The theory and applications are presented of a new image enhancement algorithm which refines computer classification maps of multispectral data. The refinement eliminates connected sets smaller than a prespecified size and merges them to the surrounding area. Conventional practices in forestry timber stand mapping requires small geographic areas to be absorbed by surrounding large areas to form homogeneous stands. This homogeneity is often incompatible with the statistical formulation of homogeneity. Elements within a timber stand which should be labeled as one feature often correspond to more than one class mapped by existing computer classification techniques. The new algorithm is designed to postprocess classification maps to result in more usable timber stand maps. The new image enhancement technique is compared with an accepted neighbor-checking postprocessing technique, demonstrating the superiority of the new technique for forestry stand mapping.

Kan, E. P.↗

Determination of the potential in a synodic system

Determination of the potential field in a fixed (inertial) system may be accomplished by the solution of a homogeneous linear partial differential equation when a family of orbits of a body moving in the field is given. This partial differential equation was presented and thoroughly analyzed earlier. The present paper discusses the same problem in a rotating system where the centrifugal and Coriolis effects render the pertinent partial differential equation in general non-homogeneous and non-linear. A linear, though non-homogeneous, partial differential equation for the determination of the synodic potential is obtained only in the special case of iso-energetic families of orbits.

Szebehely, V.↗

Chemical abundances in comets

Photoelectric filter photometry and spectrophotometry undertaken to establish homogeneous, quantitative data on chemical abundances in comets is discussed. Absolute column densities of a particular species were derived from a comparison of the absolute flux of an emission feature due to the species with a fluorescence calculation, and converted into species production rates by the use of a Haser model and the species lifetime. Observations of C2 and CN reveal a constant production rate ratio at heliocentric distances up to 1.5-2.0 AU, which implies a compositional homogeneity with depth and the formation of most comets from a homogeneous volume in the solar nebula. Observations of the trace species C3 indicate no apparent variation in relative abundances, while observations of low levels of NH2 and CH imply that NH3 and CH4 are not abundant species. H2O is considered to be the most abundant species based on detections of O, H and OH, while variations in CO or CO2 content may account for the very large differences in cometary gas-to-dust ratios and morphologies.

Ahearn, M. F.↗

LANDSAT-D investigations in snow hydrology

Two stream methods provide rapid approximate calculations of radiative transfer in scattering and absorbing media. Although they provide information on fluxes only, and not on intensities, their speed makes them attractive to more precise methods. The methods provide a comprehensive, unified review for a homogeneous layer, and solve the equations for reflectance and transmittance for a homogeneous layer over a non reflecting surface. Any of the basic kernels for a single layer can be extended to a vertically inhomogeneous medium over a surface whose reflectance properties vary with illumination angle, as long as the medium can be subdivided into homogeneous layers.

Dozier, J.↗

Undercooling of molten silicon

Droplets of uncoated molten Si(0.4-0.8 mm diameter) have been undercooled 250 C. Ge droplets of similar size have been undercooled 280 C in a B2O3 flux. The observed nucleation onset temperatures of both Si and Ge droplets are at or below the predicted amorphous phase melting temperatures T(al). The solidified structures were polycrystalline. The nucleation frequency I, calculated from the Si data (20,000/cu cm s at 240 + or - 20 C undercooling), should be an upper limit of the homogeneous nucleation frequency of the crystal phase, since it has not been established that nucleation was homogeneous in these experiments. However, this limiting I for Si indicates that homogeneous nucleation of crystal would not become appreciable in laser pulsing experiments until the liquid Si is undercooled to well below T(al).

Devaud, G.↗

On the relation between 'mixing length' and 'direct interaction approximation' theories of turbulence

The capabilities of direct interaction approximations (DIA) and weak-coupling approximations (WCA) in modeling turbulence in plasma physics studies are examined. DIA and WCA formalisms are reviewed and a DIA expression for homogeneous incompressible hydrodynamics is simplified to derive an energy spectrum in an arbitrary wavenumber space. A solution is defined for the expression when applied to long wavelength phenomena generated by an instability. The equation is further generalized to yield a transport equation for modeling the spectrum generated by homogeneous turbulence in a linearly unstable system undergoing nonlinear interaction. Finally, the technique is applied to two-dimensional turbulence in a low pressure, weakly ionized plasma embedded in a homogeneous magnetic field and experiencing instabilities caused by electron density and electric potential gradients, such as found in the ionospheric E region.

Sudan, R. N.↗

Fluidized-bed reactor modeling for production of silicon by silane pyrolysis

An ideal backmixed reactor model (CSTR) and a fluidized bed bubbling reactor model (FBBR) were developed for silane pyrolysis. Silane decomposition is assumed to occur via two pathways: homogeneous decomposition and heterogeneous chemical vapor deposition (CVD). Both models account for homogeneous and heterogeneous silane decomposition, homogeneous nucleation, coagulation and growth by diffusion of fines, scavenging of fines by large particles, elutriation of fines and CVD growth of large seed particles. At present the models do not account for attrition. The preliminary comparison of the model predictions with experimental results shows reasonable agreement. The CSTR model with no adjustable parameter yields a lower bound on fines formed and upper estimate on production rates. The FBBR model overpredicts the formation of fines but could be matched to experimental data by adjusting the unkown jet emulsion exchange efficients. The models clearly indicate that in order to suppress the formation of fines (smoke) good gas-solid contacting in the grid region must be achieved and the formation of the bubbles suppressed.

Dudukovic, M. P.↗

Chemical variability and origin of agglutinitic glass

Over 600 energy dispersive X-ray analyses of pure glass in 32 large agglutinates from five different Apollo landing sites were performed, and the results are reported and discussed. Some agglutinates are found to contain remarkably homogeneous glass; these agglutinates tend to be optically homogeneous as well. Many of the more complex agglutinates contain glass domains that are relatively homogeneous but differ in composition from other domains in the same agglutinates. The variation in composition of different domains within a single agglutinate can exceed variation among average compositions of different agglutinates in a soil. The composition of individual glass domains is not generally on the line between the composition of a bulk soil and the composition of the finest size fractions of that soil. The average composition of all agglutinate domains in a soil lies close to that line and close to the composition of the finest fraction, in support of the F3 and similar models.

Basu, A.↗

The tensile and fatigue deformation structures in a single crystal Ni-base superalloy

Dislocation structures produced in Rene N4 crystals of various orientations deformed in tension and low cycle fatigue (LCF) at 760 and 980 degrees C were examined in order to elucidate the observed differences in stress-strain behavior. Specimens tensile tested at 760 degrees C displayed significant crystallographic orientation dependences in mechanical response but comparable inhomogeneous dislocation structures. LCF specimens of various orientations had comparable cyclic stress-strain curves and generally similar somewhat more homogeneous dislocation structures. Tensile specimens at the higher temperature had comparable mechanical response and corresponding similar quite homogeneous dislocation structures with gamma' faulting; and LCF specimens had orientation-dependent mechanical response but comparable homogeneous loose dislocation networks.

Gabb, T. P.↗

Helicity fluctuations in incompressible turbulent flows

Results from direct numerical simulations of several homogeneous flows and fully developed turbulent channel flow indicate that the probability distribution function (pdf) of relative helicity density exhibits at most a 20 percent deviation from a flat distribution. Isotropic flows exhibit a slight helical nature but the presence of mean strain in homogeneous turbulence suppresses helical behavior. All the homogeneous turbulent flows studied show no correlation between relative helicity density and the dissipation of turbulent kinetic energy. The channel flow simulations indicate that, except for low-dissipation regions near the outer edge of the buffer layer, there is no tendency for the flow to be helical. The strong peaks in the relative helicity density pdf and the association of these peaks with regions of low dissipation found in previous simulations by Pelz et al.(1985) are not observed.

Rogers, Michael M.↗

The mode 3 crack problem in bonded materials with a nonhomogeneous interfacial zone

The mode 3 crack problem for two bonded homogeneous half planes was considered. The interfacial zone was modelled by a nonhomogeneous strip in such a way that the shear modulus is a continuous function throughout the composite medium and has discontinuous derivatives along the boundaries of the interfacial zone. The problem was formulated for cracks perpendicular to the nominal interface and was solved for various crack locations in and around the interfacial region. The asymptotic stress field near the tip of a crack terminating at an interface was examined and it was shown that, unlike the corresponding stress field in piecewise homogeneous materials, in this case the stresses have the standard square root singularity and their angular variation was identical to that of a crack in a homogeneous medium. With application to the subcritical crack growth process in mind, the results given include mostly the stress intensity factors for some typical crack geometries and various material combinations.

Erdogan, Fazil↗

Some implications of the isotropic momentarily frozen assumptions for the SPAN-MAT program

Potential tests using turbulence velocity histories measured in the SPAN-MAT Program are outlined to determine validity of the homogeneous, momentarily frozen assumptions for the vertical turbulence velocity component and the homogeneous, isotropic, momentarily frozen assumptions for the horizontal turbulence velocity components. In addition, methods are reviewed for prediction of the crosscorrelation function between any two spatially separated turbulence velocity components using the homogeneous, isotropic, momentarily frozen assumptions and measurements of the transverse and longitudinal turbulence velocity components.

Mark, W. D.↗

Direct simulation of compressible turbulence in a shear flow

Compressibility effects on the turbulence in homogeneous shear flow are investigated. The growth of the turbulent kinetic energy was found to decrease with increasing Mach number: a phenomenon which is similar to the reduction of turbulent velocity intensities observed in experiments on supersonic free shear layers. An examination of the turbulent energy budget shows that both the compressible dissipation and the pressure-dilatation contribute to the decrease in the growth of kinetic energy. The pressure-dilatation is predominantly negative in homogeneous shear flow, in contrast to its predominantly positive behavior in isotropic turbulence. The different signs of the pressure-dilatation are explained by theoretical consideration of the equations for the pressure variance and density variance. Previously, the following results were obtained for isotropic turbulence: (1) the normalized compressible dissipation is of O(M(sub t)(exp 2)); and (2) there is approximate equipartition between the kinetic and potential energies associated with the fluctuating compressible mode. Both of these results were substantiated in the case of homogeneous shear. The dilatation field is significantly more skewed and intermittent than the vorticity field. Strong compressions seem to be more likely than strong expansions.

Sarkar, S.↗