SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Three 15 cm carbon-carbon grid sets in a three-grid SAND optics configuration have been fabricated and tested. Grid panels were made from unidirectional tape. The screen grid panels were roughly 0.5 mm thick whereas the accelerator and decelerator panels were 0.94 mm thick.
Aerothermodynamic prediction is important for the design and analysis of many aerospace vehicles. Computational Fluid Dynamics (CFD) tools used for these predictions commonly rely on structured shock-aligned grids due to the strong shocks exhibited at high speeds. This work details the incorporation of an improved HLLE++ scheme for both perfect gas and thermochemical nonequilibrium flows which robustly captures shock waves on both non-shock-aligned and shock-aligned grids. The HLLE++ scheme reduces the impact of eigenvalue limiting on flow solutions which is required for Roe's scheme for high Mach number flows. An adapted grid approach is also demonstrated using mixed-element unstructured grids to improve heat prediction. Thin prismatic boundary layers are used with tetrahedra in the farfield and for capturing shock waves. Various results are presented for hypersonic flows over blunt bodies including cylinders, spheres, and capsules.
Aerothermodynamic prediction is important for the design and analysis of many aerospace vehicles. Computational Fluid Dynamics (CFD) tools used for these predictions commonly rely on structured shock-aligned grids due to the strong shocks exhibited at high speeds. This work details the incorporation of an improved HLLE++ scheme for both perfect gas and thermochemical nonequilibrium flows which robustly captures shock waves on both non-shock-aligned and shock-aligned grids. The HLLE++ scheme reduces the impact of eigenvalue limiting on flow solutions which is required for Roe's scheme for high Mach number flows. An adapted grid approach is also demonstrated using mixed-element unstructured grids to improve heat prediction. Thin prismatic boundary layers are used with tetrahedra in the farfield and for capturing shock waves. Various results are presented for hypersonic flows over blunt bodies including cylinders, spheres, and capsules.
This talk will address some aspects of an effort to develop both static and dynamic stability and control derivatives of a generic Lift+Cruise Urban Air Mobility vehicle. In particular, the use of NASA overset grid CFD packages OVERFLOW and Chimera Grid Tools allowed for rapid grid and solution generation while varying many database factors. Approach details include coarse gridding and control effectors, rotor disk modeling, convergence evaluation, and parallel execution on a midrange compute resource. A brief *description of the Rapid Aero Modeling (RAM) approach, including design of experiments and response surface modeling, will be given, and recent simulations of powered and unpowered dynamic multisine maneuvers will be presented.
A tool is designed which facilitates the forming of wire grids used in manufacturing strain gage grids. Flattening the grid wire by a cold working process produces a stabilized grid which can be readily handled for storage or shipment.
Arcs representative of those occurring between the grids of a mercury ion thruster were simulated. Parameters affecting an arc and the resulting damage were studied. The parameters investigated were arc energy, arc duration, and grid geometry. Arc attenuation techniques were also investigated. Potentially serious damage occurred at all energy levels representative of actual thruster operating conditions. Of the grids tested, the lowest open-area configuration sustained the least damage for given conditions. At a fixed energy level a long duration discharge caused greater damage than a short discharge. Attenuation of arc current using various impedances proved to be effective in reducing arc damage. Faults were also deliberately caused using chips of sputtered materials formed during the operation of an actual thruster. These faults were cleared with no serious grid damage resulting using the principles and methods developed in this study.
The close grid geodynamic measurement system experiment which envisages an active ranging satellite and a grid of retro-reflectors or transponders in the San Andreas fault area is a detailed simulated study for recovering the relative positions in the grid. The close grid geodynamic measurement system for determining the relative motion of two plates in the California region (if feasible) could be used in other areas of the world to delineate and complete the picture of crustal motions over the entire globe and serve as a geodetic survey system. In addition, with less stringent accuracy standards, the system would also find usage in allied geological and marine geodesy fields.
The center-to-center spacings of a photoresist pattern for an array of holes applied to a thin metal sheet are increased by uniformly stretching the thin metal sheet in all directions along the plane of the sheet. The uniform stretching is provided by securely clamping the periphery of the sheet and applying an annular force against the face of the sheet, within the periphery of the sheet and around the photoresist pattern. The technique is used in the construction of ion thruster grid units where the outer or downstream grid is subjected to uniform stretching prior to convex molding. The technique provides alignment of the holes of grid pairs so as to direct the ion beamlets in a direction parallel to the axis of the grid unit and thereby provide optimization of the available thrust.
A detailed experimental investigation has been performed to determine the ion beam divergence of an electron-bombardment ion thruster as a function of grid geometry changes. The results show that, to a good approximation, each geometrical grid parameter independently affects one aspect of grid set performance. These observations are used to develop a graphical technique for predicting the ion beam divergence of an arbitrary ion source and grid geometry combination. The usefulness of this technique is demonstrated by comparing predicted ion beam divergence of the 30-cm diameter Engineering Model ion thruster with independent experimental determinations. Good agreement is shown between predicted and experimental results.
Small hole accelerator grid ion optical systems have been tested as a possible means of improving 30-cm ion thruster performance. The effects of small hole grids on the critical aspects of thruster operation including discharge chamber performance, doubly-charged ion concentration, effluent beam characteristics, and plasma properties have been evaluated. In general, small hole accelerator grids are beneficial in improving thruster performance while maintaining low double ion ratios. However, extremely small accelerator aperture diameters tend to degrade beam divergence characteristics. A quantitative discussion of these advantages and disadvantages of small hole accelerator grids, as well as resulting variations in thruster operation characteristics, is presented.
The design of ion optics for bombardment thrusters strongly influences overall performance and lifetime. The operation of a 30 cm thruster with accelerator grid open area fractions ranging from 43 to 24 percent, was evaluated and compared with experimental and theoretical results. Ion optics properties measured included the beam current extraction capability, the minimum accelerator grid voltage to prevent backstreaming, ion beamlet diameter as a function of radial position on the grid and accelerator grid hole diameter, and the high energy, high angle ion beam edge location. Discharge chamber properties evaluated were propellant utilization efficiency, minimum discharge power per beam amp, and minimum discharge voltage.
A multi-level grid method has been studied as a possible means of accelerating convergence in relaxation calculations for transonic flows. The method employs a hierarchy of grids, ranging from very coarse (e.g., 8 x 2 mesh cells) to fine (e.g., 128 x 32); the coarser grids are used to diminish the magnitude of the smooth part of the residuals, hopefully with far less total work than would be required with, say, optimal SLOR iterations on the finest grid. The method was applied to the solution of the transonic small-disturbance equation for the velocity potential in the conservation form. Nonlifting transonic flow past a parabolic-arc airfoil is the example studied, with meshes of both constant and variable step size.
The design of ion optics for bombardment thrusters strongly influences overall performance and lifetime. The operation of a 30-cm thruster with accelerator grid open area fractions ranging from 43 to 24 percent, was evaluated and compared with previously published experimental and theoretical results. Ion optics properties measured included the beam current extraction capability, the minimum accelerator grid voltage to prevent backstreaming, ion beamlet diameter as a function of radial position on the grid and accelerator grid hole diameter, and the high energy, high angle ion beam edge location. Discharge chamber properties evaluated were propellant utilization efficiency, minimum discharge power per beam amp, and minimum discharge voltage.
Diffraction effects in modern designs for grid collimator telescopes (assumed to have roughly a 100-micron grid period) are apparent at wavelengths longer than 1 A and are dominant at wavelengths longer than 10 A. In collimators with many grids spaced far apart the effects of diffracation are to reduce strongly the peak transmission of the collimator at longer wavelengths and to broaden it by about the amount expected from Fraunhofer diffraction through a slit the size of the grid openings. Comparisons between two-collimator measurements and the present calculations show reasonable agreement; it is therefore concluded that the present single-collimator calculation gives a good representation of their diffraction-limited angular response.
In a front-contact grid pattern for a solar cell there is a trade-off necessary between shadowing loss and excessive power loss due to voltage drop in the metalization itself. If the metalization is too little there may be excessive contact resistance to the underlying semiconductor and insufficient coverage to control losses in the thin front-surface layer of the solar cell. Optimization of grid pattern area and geometry is considered analytically to minimize total losses. Worthwhile performance advantages are shown to be possible, particularly in concentrator systems, if multi-layer grid patterns are used. The current carrying fingers should be approximately square in metal cross section and the main current feedout bars should not only be wider but also thicker than the primary collecting fingers. This is termed multi-level metalization. Effective use of multi-level grid metalization allows much greater concentration-to-loss ratio for a cell of large area and permits good performance from cells of high front-layer sheet resistance.
A fast algorithm was developed for accurately generating boundary conforming, three dimensional, consecutively refined, computational grids applicable to arbitrary axial turbomachinery geometry. The method is based on using a single analytic function to generate two dimensional grids on a number of coaxial axisymmetric surfaces positioned between the hub and the shroud. These grids are of the "O" type and are characterized by quasi-orthogonality, geometric periodicity, and an adequate resolution throughout the flowfield. Due to the built in additional nonorthogonal coordinate stretching and shearing, the grid lines leaving the trailing of the blade end at downstream infinity, thus simplifying the numerical treatment of the three dimensional trailing vortex sheet.
The use of gridded back contact on thin silicon solar cells 50 micrometers was investigated. An unexpected increase in short circuit current of almost 10 percent was experienced for 2 cm x 2 cm cells. Control cells with the standard continuous contact metallization were fabricated at the same time as the gridded back cells with all processes identical up to the formation of the back contact. The gridded back contact pattern was delineated by evaporation of Ti-Pd over a photo-resist mask applied to the back of the wafer; the Ti-Pd film on the controls was applied in the standard fashion in a continuous layer over the back of the cell. The Ti-Pd contacts were similarly applied to the front of the wafer, and the grid pattern on both sides of the cell was electroplated with 8-10 micrometers of silver.
A fast algorithm was developed for accurately generating boundary-conforming, three-dimensional, consecutively refined computational grids applicable to arbitrary wing-body and axial turbomachinery geometries. The method is based on using an analytic function to generate two-dimensional grids on a number of coaxial axisymmetric surfaces positioned between the centerbody and the outer radial boundary. These grids are of the O-type and are characterized by quasi-orthogonality, geometric periodicity, and an adequate resolution throughout the flow field. Because the built-in nonorthogonal coordinate stretching and shearing cause the grid lines leaving the blade or wing trailing edge to end at downstream infinity, the numerical treatment of the three-dimensional trailing vortex sheets is simplified.