Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Geologic data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29

Final report

In eastern Nevada and western Utah is an extensive terrane that has experienced a complex tectonic history of Mesozoic deformation and superposed Tertiary extension. The Mesozoic tectonic history of this area has been the subject of controversy for the past twenty or more years. The debate has centered on whether major Mesozoic geologic structures were due to compressional or extensional tectonic regimes. The goal of our research was to decipher the deformational history of the area by combining detailed geologic mapping, remote sensing data analysis, and U-Pb and K-Ar geochronology. This study area includes the Dolly Varden Mountains and adjacent Currie Hills, located in the semi-arid environment of the northeastern Great Basin in Nevada. Vegetation cover in the Dolly Varden Mountains typically ranges from about 10 percent to 50 percent, with some places along drainages and on high, north-facing slopes where vegetation cover approaches 100 percent. Sagebrush is found at less vegetated lower elevations, whereas pinon pine and juniper are prevalent above 2,000 meters. A variety of geologic materials is exposed in the study area. A sequence of Late Paleozoic and Triassic sedimentary rocks includes limestone, dolomite, chert, sandstone, siltstone and shale. A two-phase granitic stock, called the Melrose, intruded these rocks, resulting in metamorphism along the intrusive contact. Tertiary volcanic rocks cover most of the eastern part of the Dolly Varden Mountains and low-lying areas in the Currie Hills.

Zamudio, Joe↗

Extraction of quantitative surface characteristics from AIRSAR data for Death Valley, California

Polarimetric Airborne Synthetic Aperture Radar (AIRSAR) data were collected for the Geologic Remote Sensing Field Experiment (GRSFE) over Death Valley, California, USA, in Sep. 1989. AIRSAR is a four-look, quad-polarization, three frequency instrument. It collects measurements at C-band (5.66 cm), L-band (23.98 cm), and P-band (68.13 cm), and has a GIFOV of 10 meters and a swath width of 12 kilometers. Because the radar measures at three wavelengths, different scales of surface roughness are measured. Also, dielectric constants can be calculated from the data. The AIRSAR data were calibrated using in-scene trihedral corner reflectors to remove cross-talk; and to calibrate the phase, amplitude, and co-channel gain imbalance. The calibration allows for the extraction of accurate values of rms surface roughness, dielectric constants, sigma(sub 0) backscatter, and polarization information. The radar data sets allow quantitative characterization of small scale surface structure of geologic units, providing information about the physical and chemical processes that control the surface morphology. Combining the quantitative information extracted from the radar data with other remotely sensed data sets allows discrimination, identification and mapping of geologic units that may be difficult to discern using conventional techniques.

Kierein-Young, K. S.↗

A Thermodynamic Paradigm for Studying Disease Vector’s Habitats & Life Cycles Using NASA’s NextGen Remote Sensing Instruments

Global public health is entering a new informational age through the use of spatial models of disease vector/host ecologies driven by the use of remotely sensed data to measure environmental and structural factors critical in determining disease vector habitats, distributions, life cycles, and host interactions. The vector habitat microclimates can be quantified in terms of the surface energy budget measured by satellites. The epidemiological equations (processes) can be adapted and modified to explicitly incorporate environmental factors and interfaces required by a specific disease and its vector/host cycle. Remote sensing can be used to measure or evaluate or estimate both environment (state functions) and interface (process functions). Remote sensing can be used to measure or evaluate or estimate both environment (state functions) and interface (process functions) defining vector habitats. The products of remote sensing can be integrated directly into the epidemiological equations to significantly enhance our understanding of disease vector’s life cycles and habitats. The next generation of NASA’s remote sensing instruments recently operational will provide a significant enhancement in our ability to study disease vector’s life cycles and habitats. Three new instruments have become operational on the International Space Station (ISS) In June 2018, ECOSTRESS (The ECOsystem Spaceborne Thermal Radiometer Experiment on Space Station), a five channel, thermal IR instrument with 70 m resolution and approximately 4-5 day repeat cycle of day/night pairs along with DESISa hyperspectral sensor system 235 channels (between 400 and 1000 nanometers), 30 m resolution, and data only being acquired on demand. In November 2018. GEDI (Global Ecosystem Dynamics Investigation). GEDI is a high-resolution laser ranging of Earth’s forests and topography. These instruments set the stage for NASA’s new global designated observables set of remote sensing measurements collecting hyperspectral and multispectral thermal data called SBG (Surface Biology Geology). The SBG is currently in the planning stage. The availability and use of level 1-4 data products generated from these ISS instruments will be discussed.

thermodynamics↗

Lithologic mapping of silicate rocks using TIMS

Common rock-forming minerals have thermal infrared spectral features that are measured in the laboratory to infer composition. An airborne Daedalus scanner (TIMS) that collects six channels of thermal infrared radiance data (8 to 12 microns), may be used to measure these same features for rock identification. Previously, false-color composite pictures made from channels 1, 3, and 5 and emittance spectra for small areas on these images were used to make lithologic maps. Central wavelength, standard deviation, and amplitude of normal curves regressed on the emittance spectra are related to compositional information for crystalline igneous silicate rocks. As expected, the central wavelength varies systematically with silica content and with modal quartz content. Standard deviation is less sensitive to compositional changes, but large values may result from mixed admixture of vegetation. Compression of the six TIMS channels to three image channels made from the regressed parameters may be effective in improving geologic mapping from TIMS data, and these synthetic images may form a basis for the remote assessment of rock composition.

Gillespie, A. R.↗

Geodetic measurement of deformation in the central Mojave Desert, California

Data from triangulation and trilateration surveys made during 1934-1982 are used to calculate shear strain rates in the central Mojave Desert of California. For the region between the Helendale and Camp Rock faults the shear strain rate was determined to be 0.16 + or - 0.03 microstrain/yr, with maximum right-lateral shear strain occurring on a plane oriented N41 deg W + or - 5 deg. If this deformation is due to right-lateral motion across the northwest trending local faults, the average shear straining corresponds to a relative displacement of 6.7 + or - 1.3 mm/yr across this portion of the network, accounting for about 12 percent of the predicted 56 mm/yr of relative motion between the North Atlantic and Pacific plates. From the Camp Rock fault eastward across the network there is a transition from significant to very low strain rates. Examination of nine focal mechanisms and their relation to the local geology and the strain data suggests that most of the long-term displacement occurs on the major northwest trending faults oriented nearly along the direction of relative motion between the North American and Pacific plates. Secondary faulting, controlled by a Coulomb-Anderson failure mechanism or by slip on preexisting faults can account for the occurrence of earthquakes on faults of other orientations.

Sauber, Jeanne↗

Remote sensing science for the Nineties; Proceedings of IGARSS '90 - 10th Annual International Geoscience and Remote Sensing Symposium, University of Maryland, College Park, May 20-24, 1990. Vols. 1, 2, & 3

Various papers on remote sensing (RS) for the nineties are presented. The general topics addressed include: subsurface methods, radar scattering, oceanography, microwave models, atmospheric correction, passive microwave systems, RS in tropical forests, moderate resolution land analysis, SAR geometry and SNR improvement, image analysis, inversion and signal processing for geoscience, surface scattering, rain measurements, sensor calibration, wind measurements, terrestrial ecology, agriculture, geometric registration, subsurface sediment geology, radar modulation mechanisms, radar ocean scattering, SAR calibration, airborne radar systems, water vapor retrieval, forest ecosystem dynamics, land analysis, multisensor data fusion. Also considered are: geologic RS, RS sensor optical measurements, RS of snow, temperature retrieval, vegetation structure, global change, artificial intelligence, SAR processing techniques, geologic RS field experiment, stochastic modeling, topography and Digital Elevation model, SAR ocean waves, spaceborne lidar and optical, sea ice field measurements, millimeter waves, advanced spectroscopy, spatial analysis and data compression, SAR polarimetry techniques. Also discussed are: plant canopy modeling, optical RS techniques, optical and IR oceanography, soil moisture, sea ice back scattering, lightning cloud measurements, spatial textural analysis, SAR systems and techniques, active microwave sensing, lidar and optical, radar scatterometry, RS of estuaries, vegetation modeling, RS systems, EOS/SAR Alaska, applications for developing countries, SAR speckle and texture.

Source record↗

The Use of Handheld X-Ray Fluorescence (XRF) Technology in Unraveling the Eruptive History of the San Francisco Volcanic Field, Arizona

While traditional geologic mapping includes the examination of structural relationships between rock units in the field, more advanced technology now enables us to simultaneously collect and combine analytical datasets with field observations. Information about tectonomagmatic processes can be gleaned from these combined data products. Historically, construction of multi-layered field maps that include sample data has been accomplished serially (first map and collect samples, analyze samples, combine data, and finally, readjust maps and conclusions about geologic history based on combined data sets). New instruments that can be used in the field, such as a handheld xray fluorescence (XRF) unit, are now available. Targeted use of such instruments enables geologists to collect preliminary geochemical data while in the field so that they can optimize scientific data return from each field traverse. Our study tests the application of this technology and projects the benefits gained by real-time geochemical data in the field. The integrated data set produces a richer geologic map and facilitates a stronger contextual picture for field geologists when collecting field observations and samples for future laboratory work. Real-time geochemical data on samples also provide valuable insight regarding sampling decisions by the field geologist

Young, Kelsey E.↗

Exploring the veiled planet

An overview of data obtained from various experiments which characterize geological features and atmospheric properties of Venus is presented. Data from the two Pioneer sounder probes (one located at Venus's equator and the other near the north pole) exhibit a reversal in the equator-to-pole temperature patterns at 60 km altitude which suggests that two circulation cells exist within the atmospheric region. However, the atmospheric temperature and pressure beneath the clouds are found to be nearly identical everywhere on Venus and both temperature and pressure conditions at the surface are lower than first expected. The identification of sulphur dioxide clouds which appear to coincide with Venus's characteristic global patterns of C- and Y-shaped dark markings support the hypothesis of a regular pattern of planet spanning breaks in the upper cloud layer. Explanations of a Venus sulphur cycle and of observed magnetic field structures are suggested

Source record↗

Development of the Ames Global Hyperspectral Synthetic Data Set: Surface Bidirectional Reflectance Distribution Function

This study introduces the Ames Global Hyperspectral Synthetic Data set (AGHSD), in particular the surface bidirectional reflectance distribution function (BRDF) product, to support the NASA Surface Biology and Geology (SBG) mission development. The data set is generated based on the corresponding multispectral BRDF products from NASA's MODIS satellite sensor. Based on theories of radiative transfer in vegetation canopies, we derive a simple but robust relationship that indicates that the hyperspectral surface BRDF can be accurately approximated as a weighted sum of the soil surface reflectance, the leaf single albedo, and the canopy scattering coefficient, where the weights or coefficients are spectrally invariant and thus readily estimated from the multispectral MODIS products. We validate the algorithm with simulations by a Monte Carlo Ray Tracing model and find the results highly consistent with the theoretic derivation. Using reflectance spectra of soil and vegetation derived from existing spectral libraries, we apply the algorithm to generate the AGHSD BRDF product at 1 km and 8-day resolutions for the year of 2019. The data set is biogeochemically and biogeophysically coherent and consistent, and serves the goal to support the SBG community in developing sciences and applications for the future global imaging spectroscopy mission.

Hyperspectral Remote Sensing↗

Geologic Mapping of the Zal, Hi'iaka, and Shamshu Regions of Io

We have produced regional geologic maps of the Zal, Hi'iaka, and Shamshu regions of Io s antijovian hemisphere based on Galileo mission data. Here we discuss the geologic features, summarize the map units and structures that are present, discuss the nature of volcanic activity, and give an analysis of the volcanic, tectonic, and gradational processes that affect the regions in order to better understand Io s geologic evolution. Zal Region: The Zal region (25-45degN, 65-85degW) consists of Zal Patera (120 km wide x 197 km long), two major mountains (north and south Zal Montes) which border Zal Patera to the west and south [1], and an unnamed patera ("Patera A") west of south Zal Montes. The Zal region includes at least two hotspots detected by Galileo: one along the western scarp of the Zal Patera volcano and one at the "Patera A" volcano. The floor of Zal Patera has been partly resurfaced by dark lava flows since Voyager imaging; portions of the patera floor appear unchanged during the Galileo mission. Mountains exhibit stages of degradation. The western bounding scarp of Zal Patera appears to be a fissure source vent for multiple silicate lava flows. The Zal Montes and Patera complex appears to be an example of volcano-tectonic interactions [1, 2]. Several of the flow units emanate from the fissure at the western scarp [2]. Hi'iaka Region: The Hi'iaka region (approx.12degS-5degN, 75-87degW) consists of Hi'iaka Patera, a large (60 km wide x 95 km long) patera, north and south Hi iaka Montes which border Hi'iaka Patera to the west and south and are L-shaped mirror-images of each other, west Hi'iaka Montes, a small isolated peak, and an unnamed patera ("Patera B") located south of north Hi'iaka Montes. The region includes one hotspot at Hi'iaka Patera. The floor of the patera exhibits flow deposits of differing ages. The eastern scarp of Hi'iaka Patera may be a fissure source vent for the patera floor materials. The Hi iaka Montes and Patera complex appears to be an example of volcano-tectonic interactions [1, 2]. Shamshu Region: The Shamshu region (approx.15degS-5degS, 55-77degW) consists of Shamshu Patera, three mountain units (west, north, and south Shamshu Mons), and a small unnamed patera ("Patera C") southwest of Shamshu Mons.

Bunte, Melissa K.↗

Interdisciplinary scientist participation in the Phobos mission

Data was acquired from VSK (2 wide-angle visible-NIR TV cameras at 0.4 to 0.6 micrometers and 0.8 to 1.1 micrometers, and a narrow-angle TV camera), KRFM (10-band UV-visible spectrometer at 0.3 to 0.6 micrometers and a 6-band radiometer at 5-50 micrometers), and ISM (a 128-channel NIR imaging spectrometer at 0.8 to 3 micrometers). These data provided improved mapping coverage of Phobos; improved mass, shape, and volume determinations, with the density shown to be lower than that of all known meteorites, suggesting a porous interior; evidence for a physically, spectrally and possibly compositionally heterogeneous surface; and proof that the spectral properties do not closely resemble those of unaltered carbonaceous chondrites, but show more resemblance to the spectra of altered mafic material. For Mars, the data show that the underlying rock type can be distinguished through the global dust cover; that the spectral properties and possibly composition vary laterally between and within the geologic provinces; that the surface physical properties vary laterally, and in many cases, the boundaries coincide with those of the geologic units; and the acquired data also demonstrate the value of reflectance spectroscopy and radiometry to the study of Martian geology.

Source record↗

Foreland Basin Structures and Remote Sensing

Rocky Mountain foreland basins are somewhat unique in that the basins may exhibit a variety of structural styles. It is generally agreed that shortening has occurred in the foreland basement but the cause is controversial: vertical vs compressional horizontal tectonics. Even when shortening is attributed to compression, the attitude (dip) of the fault plane and whether the horizontal or vertical component of movement is dominant is unconstrained. The controversy is difficult to resolve from surface data alone due to the variety of possible interpretations. Detailed surface mapping and geologic modeling are needed to constrain subsurface interpretations. In many areas of the Wind River and Bighorn basins detailed geologic maps do not exist. State-of-the-art remote sensing data could potentially provide an efficient means of mapping surface geology. State-of-the-art remote sensing systems now provide geometrically correct data at 30 meter pixel size and increased spectral coverage, capable of more detailed geologic analyses. These data can be photographically enlarged to 1:24,000 scale and combined with 7 1/2' uses topographic quads to provide an excellent base map for geologic interpretations.

Paylor, E. D.↗

The application of automatic recognition techniques in the Apollo 9 SO-65 experiment

A synoptic feature analysis is reported on Apollo 9 remote earth surface photographs that uses the methods of statistical pattern recognition to classify density points and clusterings in digital conversion of optical data. A computer derived geological map of a geological test site indicates that geological features of the range are separable, but that specific rock types are not identifiable.

Macdonald, R. B.↗

Geological questions and significant results provided by early ERTS-1 data

There are no author-identified significant results in this report. The organization for evaluating the uses of Earth Resources Technology Satellite data of the United States and foreign areas is described. The implementation of a system to disseminate the data to the geographical areas of interest is discussed. Brief descriptions are included of data received for the following areas: (1) east coast, (2) central United States, (3) western mountain areas, (4) west coast areas, and (5) Alaska. It is concluded that the multiband approach is useful with each of the bands providing unique and useful information. The difficulties in handling the data if all seven bands are used are examined.

Carter, W. D.↗

Apollo 15 surface science summary.

The Apollo 15 mission was the fourth manned lunar landing and the northernmost location yet visited. The landing site on the southeastern edge of the Imbrium Basin afforded the opportunity of studying several unique lunar features, the Apennine Mountains, Hadley Rille, and the Imbrium Basin fill. Detailed geological study of the data returned from the mission provided new insight into the structure and history of the Basin. A third Apollo Lunar Surface Experiment Package was deployed during the mission containing seven experiments: Passive Seismometer (PSE), Heat Flow (HFE), Surface Magnetometer (LSM), Suprathermal Ion Detector (SIDE), Cold Cathode Gauge (CCGE), Solar Wind Spectrometer (SWS), and a Dust Detector. We have been able to triangulate on the sources of moonquakes and to observe simultaneous nighttime and daytime changes in the moon's magnetic field, solar wind flux, and the neutral and ionized components of the moon's tenuous atmosphere.

Beattie, D. A.↗

Geologic mapping and mineral resource inventory by ERTS-1 satellite data in South America

The author has identified the following significant results. ERTS-1 data clearly provide significant contribution of new information on the remote areas of South America. Salar deposits have been measured and compared with those shown on World Navigation Charts; remarkable differences have been found in shape, size, number, and distribution. Repetitive coverage should enable us to develop an index of seasonal and annual environmental trends that can be compared with those of the Northern Hemisphere. New lineations, many of which are probably faults, have been found in Venezuela, Bolivia, and northern Argentina. Circular features, some of volcanic origin, have been recognized that are not shown on existing maps. The courses of several rivers have been revised and our Venezuelan counterparts report that a major new river has been recognized and charted. Large mining operations, such as the open pit copper mine of Chuquicamata in northern Chile, are recognizable and can be studied in their regional context.

Carter, W. D.↗

Cartographic products from the Mariner 9 mission

Simultaneous acquisition of geodetic, cartographic, geologic, and other scientific data on Mars from Mariner 9 required extensive modification of conventional methods of mapping. Preliminary evaluation of all data simultaneously generated an inordinately large number of interim cartographic products for a final cartographic atlas of Mars. The selection of the scales at which Mars would be mapped, the projections to be used, and the way the planet would be divided into quadrangles was based on the resolution of Mariner 9 pictures and upon the resources available over the lifetime of the Mariner Mars 1971 Project.

Batson, R. M.↗

The evolution of the moon and the terrestrial planets

The thermal evolutions of the Moon, Mars, Venus and Mercury are calculated theoretically starting from cosmochemical condensation models. An assortment of geological, geochemical and geophysical data are used to constrain both the present day temperatures and the thermal histories of the planets' interiors. Such data imply that the planets were heated during or shortly after formation and that all the terrestrial planets started their differentiations early in their history. The moon, smallest in size, is characterized as a differentiated body with a crust, a thick solid mantle and an interior region which may be partially molten. Mars, intermediate in size, is assumed to have differentiated an Fe-FeS core. Venus is characterized as a planet not unlike the earth in many respects. Core formation has occurred probably during the first billion years after the formation. Mercury, which probably has a large core, may have a 500 km thick solid lithosphere and a partially molten core if it is assumed that some heat sources exist in the core.

Toksoez, M. N.↗