SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Abstract A novel synthetic route gives access to mesoionic carbene and cyclopropenylidene supported gold chloride complexes. The corresponding cationic MIC‐gold complex obtained by chloride abstraction allows for the first transition metal‐catalyzed functionalization of both nitrogens of parent hydrazine.
Small metal clusters are of fundamental scientific interest and of tremendous significance in catalysis. These nanoscale clusters display diverse geometries and structural motifs depending on the cluster size; a knowledge of this size-dependent structural motifs and their dynamical evolution has been of longstanding interest. Given the high computational cost of first-principles calculations, molecular modeling and atomistic simulations such as molecular dynamics (MD) has proven to be an important complementary tool to aid this understanding. Classical MD typically employ predefined functional forms which limits their ability to capture such complex size-dependent structural and dynamical transformation. Neural Network (NN) based potentials represent flexible alternatives and in principle, well-trained NN potentials can provide high level of flexibility, transferability and accuracy on-par with the reference model used for training. A major challenge, however, is that NN models are interpolative and requires large quantities (similar to 10 4 or greater) of training data to ensure that the model adequately samples the energy landscape both near and far-from-equilibrium. A highly desirable goal is minimize the number of training data, especially if the underlying reference model is first-principles based and hence expensive. In this work, we introduce an active learning (AL) scheme that trains a NN model on-the-fly with minimal amount of first-principles based training data. Our AL workflow is initiated with a sparse training dataset (similar to 1 to 5 data points) and is updated on-the-fly via a Nested Ensemble Monte Carlo scheme that iteratively queries the energy landscape in regions of failure and updates the training pool to improve the network performance. Using a representative system of gold clusters, we demonstrate that our AL workflow can train a NN with similar to 500 total reference calculations. Using an extensive DFT test set of similar to 1100 configurations, we show that our AL-NN is able to accurately predict both the DFT energies and the forces for clusters of a myriad of different sizes. Our NN predictions are within 30 meV/atom and 40 meV/angstrom of the reference DFT calculations. Moreover, our AL-NN model also adequately captures the various size-dependent structural and dynamical properties of gold clusters in excellent agreement with DFT calculations and available experiments. We finally show that our AL-NN model also captures bulk properties reasonably well, even though they were not included in the training data.
Abstract Three novel isostructural equiatomic gold tetrel pnictides, AuSiAs, AuGeP, and AuGeAs, were synthesized and characterized. These phases crystallize in the noncentrosymmetric (NCS) monoclinic space group Cc (no. 9), featuring square‐planar Au within cis ‐[AuTt 2 Pn 2 ] units (Tt=tetrel, Si, Ge; Pn=pnictogen, P, As). This is in drastic contrast to the structure of previously reported AuSiP, which exhibits typical linear coordination of Au with Si and P. Chemical bonding analysis through the electron localization function suggests covalent two‐center two‐electron Tt−Pn bonds, and three‐center Au−Tt−Au and Au−Pn−Au bonds with 1.6 e − per bond. X‐ray photoelectron spectroscopy studies support the covalent and nonionic nature of Au−Pn and Au−Tt bonds. The title materials were found to be n ‐type narrow‐gap semiconductors or semimetals, with nearly temperature‐independent electrical resistivities and low thermal conductivities. A combination of the semimetallic properties with tunable NCS structure provides opportunities for the development of materials based on gold tetrel pnictides.
Doping gold nanoparticles within covalent organic frameworks (AuNPs@COFs) has garnered enormous momentum due to their unique properties and broad applications. Nevertheless, prevailing multi-step synthesis is plagued with low time efficiency, eco-unfriendliness, and tedious protocols. Herein, we introduce a rapid, sustainable, scalable, one-step mechanochemical strategy for synthesizing up to four AuNPs-doped COFs via steel ball milling within an hour under ambient conditions. This approach overcomes the synthetic barriers of conventional multi-step solution-based methods, such as extended reaction times (5 days), milligram scale, the use of toxic solvents, elevated temperatures, and reliance on external reducing agents. One exemplary AuNPs@COF (AuNPs@DMTP-TPB) exhibits high crystallinity, porosity, small AuNP size, and uniform dispersion (5.4±0.6 nm), surpassing its counterpart synthesized via multi-step solution-based methods (6.4±1.1 nm). Notably, the gram-scale synthesis of AuNPs@DMTP-TPB can be successfully achieved. Control experiments suggest that the in situ formation of AuNPs is attributed to the galvanic reduction of gold precursor by stainless steel apparatus. As a proof-of-concept catalytic application, AuNPs@DMTP-TPB demonstrates remarkable catalytic activity and recyclability for the aqueous reduction of 4-nitrophenol under ambient conditions. This study provides an environmentally benign and fast pathway to synthesize AuNPs@COFs via mechanochemistry for the first time, opening tremendous possibilities for heterogeneous catalysis and beyond.
The formation and reduction of gold oxide in wet ionic liquid (IL), N-trimethyl-N-butylammonium bis(trifluoromethanesulfonyl)imide, ([Me 3 N n Bu][TFSI]) is examined. The water concentration is determined using both the charge and peak current from the reduction of gold oxide and compared directly with Karl Fischer data. The quantitative determination of water in the IL is demonstrated for concentrations between 0.09 and 0.74 by weight (w%). The treatment of wet IL with dry nitrogen or molecular sieves reduces the water below background levels. Finally, methods for acid neutralization and the reduction of water with molecular sieves are conducted to minimize their impact on subsequent electrochemical measurements.
The ability of nanoporous metals to avoid accumulation of damage under ion beam irradiation has been the focus of several studies in recent years. The width of the interconnected ligaments forming the network structure typically is on the order of tens of nanometers. In such confined volumes with high amounts of surface area, the accumulation of damage (defects such as stacking-fault tetrahedra and dislocation loops) can be mitigated via migration and annihilation of these defects at the free surfaces. Here, in situ characterization of radiation damage in nanoporous gold (np-Au) was performed in the transmission electron microscope. Several samples with varying average ligament size were subjected to gold ion beams having three different energies (10 MeV, 1.7 MeV and 46 keV). The inherent radiation tolerance of np-Au was directly observed in real time, for all ion beam conditions, and the degree of ion-induced damage accumulation in np-Au ligaments is discussed here.
Here, recent experimentally validated alloy design theories have demonstrated nanocrystalline binary alloys that are stable against thermally induced grain growth. An open question is whether such thermal stability also translates to stability under irradiation. In this study, we investigate the response to heavy ion irradiation of a nanocrystalline platinum gold alloy that is known to be thermally stable from previous studies. Heavy ion irradiation was conducted at both room temperature and elevated temperatures on films of nanocrystalline platinum and platinum gold. Using scanning/transmission electron microscopy equipped with energy-dispersive spectroscopy and automated crystallographic orientation mapping, we observe substantial grain growth in the irradiated area compared to the controlled area beyond the range of heavy ions, as well as compositional redistribution under these conditions, and discuss mechanisms underpinning this instability. These findings highlight that grain boundary stability against one external stimulus, such as heat, does not always translate into grain boundary stability under other stimuli, such as displacement damage.
Although gold remains a preferred surface finish for components used in high-reliability electronics, rapid developments in this area have left a gap in the fundamental understanding of solder joint gold (Au) embrittlement. Furthermore, as electronic designs scale down in size, the effect of Au content is not well understood on increasingly smaller solder interconnections. As a result, previous findings may have limited applicability. The current study focused on addressing these gaps by investigating the interfacial microstructure that evolves in 63Sn-37Pb solder joints as a function of Au layer thickness. Those findings were correlated to the mechanical performance of the solder joints. Increasing the initial Au concentration decreased the mechanical strength of a joint, but only to a limited degree. Kirkendall voids were the primary contributor to low-strength joints, while brittle fracture within the intermetallic compounds (IMC) layers is less of a factor. The Au embrittlement mechanism appears to be self-limiting, but only once mechanical integrity is degraded. Sufficient void evolution prevents continued diffusion from the remaining Au.
Metal oxides are commonly used as the supports of gold nanoparticles for catalytic CO oxidation, whereas metal salts are rarely considered suitable supports. In the present work, we developed a new kind of gold nanocatalyst supported on heterostructured PbSO4-MCF mesoporous materials that was prepared by an in situ growth method using dodecylbenzenesulfonate (SOBS) as a sulfonate precursor. It was found that an Au/PbSO4-MCF (SDBS) catalyst preheated at 300 degrees C showed high CO conversion below 100 degrees C. In addition, the stability of selected catalysts was studied as a function of time on stream. Because of the alteration of surface properties, these Au nanocatalysts were highly sinter-resistant. Published by Elsevier B.V.
Unimolecular decomposition pathways are challenging to address in transition-metal catalysis and have previously not been suppressed via incorporation into a solid support. Two robust metal-organic frameworks (IRMOF-10 and bio-MOF-100) are used for the architectural stabilization of a structurally well-defined gold(III) catalyst. The inherent rigidity of these materials is utilized to preclude a unimolecular decomposition pathway—reductive elimination. Through this architectural stabilization strategy, decomposition of the incorporated gold(III) catalyst in the metal-organic frameworks is not observed; in contrast, the homogeneous analog is prone to decomposition in solution. Finally, stabilization of the catalyst in these metal-organic frameworks precludes leaching and enables recyclability, which is crucial for productive heterogeneous catalysis.
Cryogenic systems that utilize cryocoolers with conduction cooling for attaining temperatures of 4.2 K and below routinely employ mechanically pressed components of copper to form the heat conduction path. To help with the design of such systems, the present paper introduces thermal contact resistance data of pressed copper-copper and gold-plated copper-copper contacts from nearly twenty measurement programs that span across past fifty years. Relevant theoretical models of thermal contact resistance are briefly reviewed and compared with the experimental data. Gold-plated copper contacts display reasonable trend with the models, which may serve as a design reference for such contacts. A few measurement techniques are also summarized that enable quick characterization of thermal contacts at low temperatures.
Zirconium-based metal-organic frameworks, including UiO-66 and related frameworks, have become the focus of considerable research in the area of chemical warfare agent (CWA) decontamination. However, little work has been reported exploring these metal-organic frameworks (MOFs) for CWA sensing applications. For many sensing approaches, the growth of high-quality thin films of the active material is required, and thin film growth methods must be compatible with complex device architectures. Several approaches to synthesize thin films of UiO-66 have been described but many of these existing methods are complex or time consuming. In this work, we describe the development of a simple and rapid microwave assisted synthesis of oriented UiO-66 thin films on unmodified silicon (Si) and gold (Au) substrates. Thin films of UiO-66 and UiO-66-NH 2 can be grown in as little as 2 min on gold substrates and 30 min on Si substrates. The film morphology and orientation are characterized and the effects of reaction time and temperature on thin film growth on Au are investigated. Both reaction time and temperature impact the overgrowth of protruding discrete crystallites in the thin film layer but, surprisingly, no strong correlation is observed between film thickness and reaction time or temperature. We also briefly describe the synthesis of Zr/Ce solid solution thin films of UiO-66 on Au and report the first synthesis of a solid solution thin film MOF. Finally, we demonstrate the utility of the microwave method for the facile functionalization of two sensor architectures, plasmonic nanohole arrays and microresonators, with UiO-66 thin films.
Sorafenib is a multi-kinase inhibitor that has been highlighted as a tumor suppressor due to its anti-proliferative and anti-angiogenic properties, whereas the clinical application of Sorafenib is restricted by the side effects it may cause. The past decade has witnessed the development of a series of sorafenib derivatives to improve the clinical performance of sorafenib. Gold nanoparticles (AuNPs) have been widely utilized in drug delivery systems due to their unique properties, including biocompatible nature, simple preparation, and easy surface modification. Herein, this study is aimed to investigate the anti-tumor effects of new sorafenib derivatives-capped gold nanoparticles (AuNPs-New Sor) in tumor formation and metastasis as well as the underlying mechanisms. Initially, new sorafenib derivatives were constructed and combined with AuNPs to form AuNPs-New Sor, and the properties of synthesized AuNPs-New Sor were identified in a mouse model of tumorigenesis. The effect of AuNPs-New Sor on tumor vascular normalization was investigated by assessing vascular permeability and perfusion rate. Next, we evaluated the effect of AuNPs-New Sor on migration and viability of tumor cells and human umbilical vein endothelial cells (HUVECs) as well as on HUVEC angiogenesis in vitro. A melanoma mouse model was further established for in vivo substantiation of the anti-tumor effect of AuNPs-New Sor. According to the results, AuNPs could deliver new sorafenib derivatives into tumor tissues and downregulate the expression of epidermal growth factor receptor (EGFR) and vascular endothelial growth factor receptor-2 (VEGFR-2), thereby suppressing tumor migration, EMT, and angiogenesis in vitro. In addition, AuNPs-New Sor displayed competitive anti-tumor activities in vivo. Taken together, AuNPs-New Sor may attenuate tumor development and angiogenesis through downregulation of EGFR and VEGFR-2.
Hydrogen–metal interaction is the foundation of many technologies and processes, but how hydrogen behaves in atomically precise gold nanoclusters remains unknown even though they have been used in hydrogenation catalysis and water splitting. Herein, we investigate how hydrogen interacts with [Au25(SR)18]q clusters and mono-atom-doped bimetallic [M1Au24(SR)18]q clusters (M = Pt, Pd, Ag, Cu, Hg, or Cd) from first principles. We find that hydrogen behaves as a metal in these clusters and contributes its 1s electron to the superatomic free-electron count. This opposite behavior compared to that of the hydride in Cu and Ag clusters allows the small hydrogen to interstitially dope the gold clusters and tune their superatomic electronic structure. The doping energetics shows that when an eight-electron superatom is formed after H doping, the binding energy of H is much stronger, while binding of H with an already eight-electron superatom is much weaker. Indeed, frontier orbitals and the HOMO–LUMO gaps of [Au25H1(SR)18]0, [Au25H2(SR)18]+, [PtAu24H2(SR)18]0, [PdAu24H2(SR)18]0, [AgAu24H(SR)18]0, and [CuAu24H(SR)18]0 all have very similar features, because they are all eight-electron superatoms. By calculating the Gibbs free energies of hydrogen adsorption, we predict that PtAu24(SR)18, PdAu24(SR)18, and center-doped CuAu24(SR)18 can be good electrocatalysts for the hydrogen evolution reaction.
Systematic theoretical and experimental investigations have been performed to understand the periodicity and electronic structures of trivalent-gold halides using gold tetrahalides [AuX4]⁻ anions (X = F, Cl, Br, I, At, Uus). The [AuX4]⁻ (X = Cl, Br, I) anions were produced in gas phase and their negative-ion photoelectron spectra were obtained, which exhibited rich and well-resolved spectral peaks. We calculated the adiabatic as well as vertical electron detachment energies using density functional methods with scalar and spin-orbit coupling relativistic effects. The simulated photoelectron spectra based on these calculations are in good agreement with the experimental spectra. Our results show that the trivalent Au(III) oxidation state becomes progressively less stable while Au(I) is preferred when the halides become heavier along the Period Table. This trend reveals that the oxidation state of metals in complexes can be manipulated through ligand design
A series of n-alkanes cospread with alkanethiol-stabilized gold nanoparticles (AuNP) were studied as Langmuir monolayers by synchrotron X-ray reflectivity and diffraction. Tetradecanethiol capped gold nanoparticles with core diameters close to 2 nm were used to make films at 20 °C, below the ligand order–disorder temperature. A variety of n-alkane chain lengths (Cn = C n H 2n+2 , where n = 12, 15 and 16) were tested to assess the interfacial assembly of nanoparticle films as a result of different mixing scenarios indicated in their surface pressure versus area isotherms. Synchrotron grazing incidence X-ray diffraction (GIXD) and reflectivity (XR) confirm that mixtures of n-alkane and AuNP exhibiting improved fluidity in their compression isotherm are indeed incorporating n-alkane into the AuNP ligand shell and stabilizing it at the air–water interface. The resulting films show a doubling of their correlation lengths and thus a significant improvement on their ordering, as well as increased lattice spacing that is dependent upon the n-alkane chain length. Mixtures that do not exhibit changes in their surface pressure vs area isotherm similarly show little change in the interfacial assembly of the nanoparticle films except to promote monolayer collapse and multilayer formation. Improvements to the film order are assigned to the initial formation of larger nanoparticle domains. Here, the nature of the chain length dependence and persistence of the n-alkane through compression suggest a favorable interaction with the nanoparticle ligand shell that results in the extension of methylene units of the longer alkanes beyond the thiol layer, which has implications for influencing nanoparticle interactions.
Here, the nanosize effect on electron–phonon interactions in free-electron noble metals has been a subject of intense discussion because of their important applications in physics, chemistry, and biomedicine. However, the interference from supports of dispersive nanoparticulate metals has led to controversial observations. We utilize freestanding, bicontinuous nanoporous gold (NPG) films to investigate electron–phonon interaction dynamics using ultrafast MeV electron diffraction. Compared to solid gold films, NPG shows faster electron–phonon interaction and thus noticeably higher electron–phonon coupling constant. The results demonstrate that surface states of electrons and phonons play an important role in electron–phonon coupling of nanostructured materials.
Here, we demonstrate the facile deposition of catalytically active stable Au nanoparticles on single-layer MoS 2 , on an inert oxide substrate (SiO 2 ). Unlike a gold surface, adsorption of CO on these gold particles proceeds even at room temperature. Subsequent exposure to oxygen leads to CO 2 formation and desorption along a reaction pathway described, in detail, by density functional theory. The barrier to CO oxidation, along this pathway, is less than 300 meV, corroborating the facile nature of the CO oxidation reactions in this system. X-ray photoelectron spectroscopy directly reveals that the carbon monoxide, adsorbed on Au nanoparticles on single-layer MoS 2 , can be repeatedly titrated off the substrate by exposure to oxygen. Comparison of computational results assuming a defect-laden and pristine MoS 2 substrate suggest that the pristine single-layer material may be superior in supporting this reaction.