Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “FLUORIDE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Distinct Mechanism of Anti-Corrosion and Swelling-Adhesion Modeling of Low-Dimensional Nylon-Fluoropolymer Composite Coatings

Compared to other polymers, composite coatings with fluoropolymers as the matrix have attracted considerable interest due to their mechanical performance, chemical stability, and low surface energy. Herein, we present an anticorrosion mechanism of fluoropolymer composite coatings achieved by dispersing varying amounts of polyamide 12 (PA-12) particles over a poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP) matrix. The choice of PVDF-HFP as a coating matrix was driven by its superior processability and mechanical properties over Teflon, while PA-12 afforded swelling capacity, preventing electrolyte permeation, and inhibiting matrix stress crack propagation. The corrosion resistance of the coatings was assessed mainly by potentiodynamic polarization and impedance measurements while being immersed in a NaCl solution. Our electrochemical measurement findings showed that 0.75% w/w PA-12 in the PVDF-HFP matrix significantly enhanced corrosion protection even after 21 days of immersion. Microscopy, dielectric spectroscopy, surface analysis, and mechanical testing (American Society for Testing and Materials standards) corroborated the results. PVDF-HFP coatings containing a minimum percolation threshold of 0.75 wt % PA-12 with 1 mil thickness on mild steel exhibited a remarkable increase in resistance and film adhesion, and a notable corrosion rate decrease. Finite element analysis simulation with a bilinear traction-separation law confirmed the swelling mechanism and adhesion behavior. Finally, this study highlights the potential of nylon particle dispersion in PVDF-HFP matrices as a practical approach to developing advanced anticorrosion coatings with promising practical applications in various industries.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Non-Innocent Role of the Ceria Support in Pd-Catalyzed Halophenol Hydrodehalogenation

The hydrodehalogenation (HDH) of halophenols is efficiently catalyzed by palladium supported on high-surface ceria (Pd/CeO2) under mild conditions (35 °C, 1 atm H2). A combination of NMR, diffuse reflectance infrared Fourier transform spectroscopy, Raman spectroscopy, and XPS studies and HDH kinetics of substituted halobenzenes suggests that the reaction proceeds mainly via a sequence of dissociative adsorption of phenolic hydroxyl onto the support, oxidative addition of the C–halogen bond to Pd, and reductive elimination to give phenol and hydrogen halide. The dissociative adsorption of the -OH group onto oxygen vacancies of the ceria support results in an electron-rich intermediate that facilitates the turnover-limiting reductive elimination step. In contrast, the direct pathway catalyzed by Pd without dissociative adsorption of the reactants on the support takes place at a slower rate. The mechanistic insights gained in this study were used to modify the reaction conditions for enabling HDH of recalcitrant halides such as fluorides and iodides.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

A Coacervate-Based Mixed-Conducting Binder for High-Power, High-Energy Batteries

Polymer binders add crucial structural integrity to lithium ion battery composite cathodes, but industry standard binders, such as polyvinylidene fluoride (PVDF), are insulating to ions and electrons, detrimentally adding resistance to the overall system. In this work, we use electrostatics to stabilize a blend of a charged conjugated polymer with an oppositely charged polyelectrolyte, providing a processable, stable binder with high ionic and electronic conduction. Using LiFePO4 cathodes as a model system, we show significant improvement in rate capability and stability, with the conducting binder enabling a 39% utilization at 6C compared to 1.6% when PVDF is the binder. Additionally, the conducting binder affords a 63% capacity retention over 400 C/2 cycles, compared to only a 6% retention over 400 cycles when PVDF is the binder. These results show that electrostatically stabilized complexation is a promising strategy to integrate both electronic and ionic conductivity into a binder, while simultaneously maintaining stability and processability.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Direct Mapping of Fluorine in Cation Disordered Rocksalt Cathodes

Cation-disordered rocksalt (DRX) oxides are promising candidates as next-generation cathodes for lithium-ion batteries. Partial fluorination of the DRX oxides enhances their cyclability. However, the lattice position, concentration, and spatial distribution of fluorine within DRX lattices remain elusive. Here, in this work, we use atom location by channeling-enhanced microanalysis, energy-dispersive X-ray spectroscopy, electron energy loss spectroscopy, and integrated differential phase contrast imaging in a scanning transmission electron microscope to gain atomic-level insights into DRX with nominal composition of Li 1.2 Mn 0.7 Ti 0.1 O 1.7 F 0.3 and Li 1.15 Ni 0.45 Ti 0.3 Mo 0.1 O 1.85 F 0.15 . We reveal that fluorine substitutes oxygen in the DRX lattices. The O/F ratio in terms of O+F = 2 is in the range from 1.92:0.08 to 1.82:0.18. Spatially, fluorine is distributed in the proximity of the Li-rich regions but distinct from lithium fluoride. Additionally, we observe that incorporation of fluorine in the DRX lattice induces a larger variation in cation–anion separation. These observations provide insight into the guided design of oxyfluoride DRX cathodes for high-performance batteries.

(S)TEM↗
DOE OSTI2022

Transition Metal Dissolution Mechanisms and Impacts on Electronic Conductivity in Composite LiNi 0.5 Mn 1.5 O 4 Cathode Films

The high-voltage LiNi 0.5 Mn 1.5 O 4 (LNMO) spinel cathode material offers high energy density storage capabilities without the use of costly Co that is prevalent in other Li-ion battery chemistries (e.g., LiNi x Mn y Co z O 2 (NMC)). Unfortunately, LNMO-containing batteries suffer from poor cycling performance because of the intrinsically coupled processes of electrolyte oxidation and transition metal dissolution that occurs at high voltage. In this work, we use operando electron paramagnetic resonance (EPR) and nuclear magnetic resonance (NMR) spectroscopies to demonstrate that transition metal dissolution in LNMO is tightly coupled to HF formation (and thus, electrolyte oxidation reactions as detected with operando and in situ solution NMR), indicative of an acid-driven disproportionation reaction that occurs during delithiation (i.e., battery charging). Leveraging the temporal resolution (s-min) of magnetic resonance, we find that the LNMO particles accelerate the rate of LiPF 6 decomposition and subsequent Mn 2+ dissolution, possibly due to the acidic nature of terminal Mn-OH groups. X-ray photoemission electron microscopy (XPEEM) provides surface-sensitive and localized X-ray absorption spectroscopy (XAS) measurements, in addition to X-ray photoelectron spectroscopy (XPS), that indicate disproportionation is enabled by surface reconstruction upon charging, which leads to surface Mn 3+ sites on the LNMO particle surface that can disproportionate into Mn 2+ (dissolved) and Mn 4+ (s) . During discharge of the battery, we observe high quantities of metal fluorides (in particular, MnF 2 ) in the cathode electrolyte interphase (CEI) on LNMO as well as the conductive carbon additives in the composite. Electronic conductivity measurements indicate that the MnF 2 decreases film conductivity by threefold compared to LiF, suggesting that this CEI component may impede both the ionic and electronic properties of the cathode. Ultimately, to prevent transition metal dissolution and the associated side reactions in spinel-type cathodes (particularly those that operate at high voltages like LNMO), the use of electrolytes that offer improved anodic stability and prevent acid byproducts will likely be necessary.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Elucidating Lithium Transport Mechanisms in Disordered LiF from Machine-Learning Molecular Dynamics Simulations

Lithium fluoride (LiF) is a ubiquitous component of solid- and cathode–electrolyte interphases, yet its functional role remains unclear under the structural and chemical heterogeneity typical of cycling batteries. Here, we systematically quantify how structural disorder, off-stoichiometry, and strain govern Li-ion transport in LiF. Using a machine-learning potential to enable extensive molecular-dynamics sampling, we compare crystalline and amorphous LiF, Li 0.95 F, and LiF 0.95 , and evaluate the impact of small homogeneous deformations. Defect-free crystalline LiF is effectively ion-blocking at 300−500 K, whereas amorphization generates free-volume–assisted percolation pathways that facilitates Li-ion diffusion. At elevated temperatures, thermodynamically driven crystallization disrupts these pathways, leading to non-Arrhenius behavior. In crystalline phases, Li deficiency activates vacancy-mediated diffusion, while in amorphous LiF, transport is governed primarily by network connectivity. Strain is found to have only a marginal effect on Li mobility in both crystalline and amorphous structures.

Batteries↗
DOE OSTI2021

Ultrafast and Controllable Phase Evolution by Flash Joule Heating

Flash Joule heating (FJH), an advanced material synthesis technique, has been used for the production of high-quality carbon materials. Direct current discharge through the precursors by large capacitors has successfully converted carbon-based starting materials into bulk quantities of turbostratic graphene by the FJH process. However, the formation of other carbon allotropes, such as nanodiamonds and concentric carbon materials, as well as the covalent functionalization of different carbon allotropes by the FJH process, remains challenging. Here, we report the solvent-free FJH synthesis of three different fluorinated carbon allotropes: fluorinated nanodiamonds, fluorinated turbostratic graphene and fluorinated concentric carbon. This is done by millisecond flashing of organic fluorine compounds and fluoride precursors. Spectroscopic analysis confirms the modification of the electronic states and the existence of various short-range and long-range orders in the different fluorinated carbon allotropes. As a result, the flash time-dependent relationship is further demonstrated to control the phase evolution and product compositions.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2025

Etching-Chemistry-Driven Ruthenium Doping on Ti 3 C 2 T x MXene for Optimizing Electrochemical Performance

We demonstrate that the etching chemistry used during MXene synthesis from Ti 3 AlC 2 MAX phase significantly influences surface functionalization and structural vacancies, which in turn affect ruthenium (Ru) ion interactions. Using hydrofluoric acid (HF) and ammonium bifluoride (NH 4 HF 2 ) as etchants, we obtained MXene surfaces with distinct functional groups and Ti vacancies that impact Ru ion interactions and electrochemical performance. Both MXene variants (labeled MX(H) and MX(N), respectively) exhibited negative zeta potentials in their pristine state, but upon the addition of Ru the zeta potential for MX(H) reached 12.9 mV while that for MX(N) remained negative at −6.4 mV. This adsorption resulted in a 14.4-fold increase in the specific capacitance of MX(H)/Ru compared to pristine MX(H), whereas MX(N)/Ru exhibited only a 4.4-fold increase over its pristine counterpart. X-ray diffraction analysis identified the formation of ammonium titanium oxide fluoride, (NH 4 ) 3 TiOF 5 , on MX(N), which likely contributed to its reduced Ru adsorption. X-ray photoelectron spectroscopy suggested the presence of Ti vacancies in both MXene variants; however, their behavior toward Ru accommodation differed markedly, with MX(H) showing the most obvious shift in the Ti 2p peak in the XPS survey spectrum, while MX(N) showed the most obvious shift in the C 1s peak. Electron paramagnetic resonance spectroscopy further demonstrated a distinct alteration in the spectral signatures of MX(H) upon Ru addition, in contrast to the negligible changes in MX(N), indicating effective passivation of the Ti defect sites in MX(H) via vacancy-assisted Ru doping. Cyclic voltammetry showed that Ru-incorporated MX(H) nanocomposites exhibit more efficient redox-active sites, as reflected in their higher capacitance values. These findings highlight the pivotal role of MXene surface chemistry in controlling cation adsorption, providing valuable insights for the rational design of high-performance electrodes.

2D surface engineering↗
DOE OSTI2021

Temperature-Dependent Properties of Molten Li 2 BeF 4 Salt Using Ab Initio Molecular Dynamics

Molten lithium tetrafluoroberyllate (Li 2 BeF 4 ) salt, also known as FLiBe, with a 2:1 mixture of LiF and BeF 2 is being proposed as a coolant and solvent in advanced nuclear reactor designs, such as the molten salt reactor or the fluoride salt cooled high-temperature reactor. We present the results on the structure and properties of FLiBe over a wide range of temperatures, 0–2000 K, from high-throughput ab initio molecular dynamics simulation using a supercell model of 504 atoms. The variations in the local structures of solid and liquid FLiBe with temperature are discussed in terms of a pair distribution function, coordination number, and bond angle distribution. The temperature-dependent electronic structure and optical and mechanical properties of FLiBe are calculated. The optical and mechanical property results are reported for the first time. The results above and below the melting temperature (~732 K) are compared with the experimental data and with data for crystalline FLiBe. The electronic structure and interatomic bonding results are discussed in correlation with the mechanical strength. A novel concept of total bond order density (TBOD), an important quantum mechanical parameter, is used to characterize the internal cohesion and strength in the simulated models. The results show a variation in the rate of change in properties in solid and liquid phases with anomalous behavior across the melting region. The observed trend is the decrease in mechanical strength, band gap, and TBOD in a nonlinear fashion as a function of temperature. The refractive index shows a surprising minimum at 850 K, among the tested temperatures, which lies above the melting point. These findings provide a new platform to understand the interplay between the temperature-dependent structures and properties of FLiBe salt.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Recovery of Cathode Materials and Aluminum Foil Using a Green Solvent

Effective separation of cathode materials and current collectors is one of the most enabling steps, yet a very challenging step, in recycling electrode scraps and spent Li-ion cells. Here, a green solvent, triethyl phosphate, was used to recover invaluable cobalt-containing cathodes, such as NMC622, by dissolving the polymeric binder of poly(vinylidene fluoride). Electrochemically active materials were separated from cathode scraps collected at the manufacturing step of electrodes through a solvent-based separation method without jeopardizing their physical characteristics, crystalline structure, and electrochemical performance. In this work, we found that the recovered aluminum foils were clean without any sign of corrosion and that the polymeric binder could be recovered via a non-solvent-induced phase separation. Additionally, recovery of cathode materials from spent cells was achieved using refined separation parameters based on the recycling of cathode scraps. It is anticipated that this green solvent-based separation for cathode recovery will attract significant interest by the lithium-ion battery manufacturing and recycling communities.

25 ENERGY STORAGE↗
DOE OSTI2022

Molecular Engineering of Biorefining Lignin Waste for Solid-State Electrolyte

Lignin is the second most abundant renewable biopolymer on Earth but also a waste in both the paper industry and lignocellulosic biorefineries. Recently, lignin valorization has been extensively sought after to return economics, enhance carbon efficiency, and improve the bioeconomy, but the commercial value and size compatibility still hinder its applications. In this study, we developed a facile strategy to apply lignin waste into a solid-state electrolyte (SSE), which represents a safe next generation energy storage. Here, lignin was grafted with polyethylene glycol (PEG), an efficient lithium-ion (Li + ) conductive polymer, to enable its ion conduction. The synthesized PEG-g-lignin was mixed with poly(vinylidene fluoride)-co-hexafluoropropylene (PVDF-HFP) and PEG-g-lignin-based bis(trifluoromethanesulfonyl)imide (LiTFSI) to prepare a solid polymer electrolyte (SPE), which has an ionic conductivity of 2.5 × 10 –5 S/cm at 25 °C. This result was further enhanced to 6.5 × 10 –5 S/cm by adding an ion-conductive ceramic of Li 6.4 La 3 Ga 0.2 Zr 2 O 12 (LLGZO), which is referred to as composite polymer electrolyte (CPE). These data represent the highest ones among reported polymer-based SSE. A mechanistic study by using 2D HSQC NMR revealed that PEG-g-lignin has increased ether type β–O–4 linkages that can promote the interchain hopping of Li+ between lignin polymer chains, and 31 P NMR revealed that the lignin phenolic end can be associated by Li + . Moreover, the abundant aromatic moieties and methoxyl in PEG-g-lignin also enhanced Li + association and improved its ionic conductivity. The superior ionic conductivity of PEG-g-lignin-based SSE can enable massive applications of this biorefining waste in all-solid-state lithium batteries (ASSLBs), which has potential to promote the energy sector by promoting the bioeconomy and enhancing the renewability and sustainability of future energy storage.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Facile Room-Temperature Electrodeposition of Rare Earth Metals in a Fluorine-Free Task-Specific Electrolyte

Electrochemical deposition of rare earth metals at room temperature has attracted increasing interest due to its advantage in energy efficiency over traditional hydrometallurgical and pyrometallurgical processes. Recent progress has been made with fluorinated electrolyte systems; however, the formation of an electrode-passivating fluoride layer by electrolyte decomposition is often overlooked. Such a passivation layer causes significant and rapid decay of the deposition current and significantly hinders practical application. To address this issue, we demonstrate a fluorine (F)-free task-specific electrolyte utilizing the borohydride anion for the efficient electrodeposition of rare earth metals. By eliminating the passivation effect, the deposition process exhibits a stable current and accumulates a thick neodymium deposit on the electrode. Raman spectroscopy of the electrolyte reveals a synergetic effect between rare earth borohydride and lithium borohydride which promotes the dissociation of both borohydride salts, resulting in significantly increased ionic conductivity and electrochemical performance. Cyclic voltammetry and in-depth X-ray photoelectron spectroscopy of the deposits suggest that the electrodeposition of rare earth metals could undergo a Li-mediated reduction process. Finally, quantitative analysis of the deposits reveals that the overall concentration of the rare earth elements reaches 75% which contains 40–48% metallic phase.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Development of an Energy-Efficient and High-Productivity Ammonia Recovery and Removal Process Using Resin-Wafer Electrodeionization

As efforts to develop various energy resources, ammonia energy is emerging as a promising carbon-free fuel alternative. Recovering high-concentration ammonia and ammonium from wastewater potentially offers significant environmental and economic benefits. However, research on recovery technologies for industries such as semiconductors remains limited. This study develops an efficient, energy-saving ammonia recovery technology using Resin Wafer Electrodeionization (RW-EDI), specifically for the semiconductor industry. RW-EDI shows promise for recovering ammonia from high-concentration wastewater. By optimizing parameters, such as voltage and initial concentration, a balance between productivity and energy consumption is achieved. Results indicate that ammonium and fluoride ion transport kinetics are similar, with minimal competition and selectivity values between 0.95 and 1.08. As the initial ammonia/ammonium concentration increases from 500 to 8000 ppm, reaction rate constants and the overall mass transfer coefficient decrease. Increasing the voltage can enhance mass transfer and eliminate barriers. Ion transport primarily occurs in the RW solid phase, accounting for 93.89% of the total current. Additionally, RW-EDI shows superior specific energy consumption within a concentration range of 500 ppm to 8000 ppm, outperforming technologies like electrodialysis by reducing specific energy consumption from 8−15 kWh/kg-NH 4 + to 1.2−2.5 kWh/kg-NH 4 + . This study highlights RW-EDI’s potential for ammonia recovery, providing valuable insights for future applications in wastewater treatment.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Electrode Separation and Froth Flotation for the Recovery of Li-ion Battery Cathode Materials

Increasing use of Li-ion batteries (LIBs) will significantly increase the quantity of LIB waste generated from end-of-life batteries. Spent LiCoO 2 (LCO) battery cathodes contain significant quantities of valuable metals, making them good candidates for recycling. Typical recycling processes rely on high temperatures (pyrometallurgy) and chemical leachants (hydrometallurgy) to completely decompose the cathode and enable material recovery. Direct recycling processes and recovery of active material from electrode scrap do not benefit from such destructive recycling, and an efficient means of separating the cathode active material from the inactive components (e.g., polyvinylidene fluoride (PVDF) binder, conductive carbon) is needed. Here, we explore PVDF removal from LCO cathodes by two separate methods, evaluating their suitability for coupling to subsequent separation by froth flotation (FF). We show that washing electrodes in the solvent PolarClean (PC) dissolves PVDF away from LCO cathodes, enabling separation of the remaining LCO and conductive carbon by FF. The process is suitable for use with both pristine and cycled LCO electrodes, and the pristine recovered material can be used to prepare electrodes capable of cycling at 140 mAh/g. In conclusion, this demonstrates the suitability of coupled PC washing and FF separation for recycling both end-of-life batteries and scrap electrode material.

Batteries↗
DOE OSTI2021

Modes of Disorder in Poly(carbon monofluoride)

Poly(carbon monofluoride), or (CF) n , is a layered fluorinated graphite material consisting of nanosized platelets. In this work, we present experimental multidimensional solid-state NMR spectra of (CF)n, supported by density functional theory (DFT) calculations of NMR parameters, which overhauls our understanding of structure and bonding in the material by elucidating many ways in which disorder manifests. We observe strong 19 F NMR signals conventionally assigned to elongated or “semi-ionic” C–F bonds and find that these signals are in fact due to domains where the framework locally adopts boat-like cyclohexane conformations. We calculate that C–F bonds are weakened but are not elongated by this conformational disorder. Exchange NMR suggests that conformational disorder avoids platelet edges. We also use a new J-resolved NMR method for disordered solids which provides molecular-level resolution of highly fluorinated edge states. Strings of consecutive difluoromethylene groups at edges are relatively mobile. Topologically distinct edge features, including zigzag edges, crenellated edges, and coves are resolved in our samples by solid-state NMR. Disorder should be controllable in a manner dependent on synthesis, affording new opportunities for tuning the properties of graphite fluorides.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Uranium Single Particle Analysis for Simultaneous Fluorine and Uranium Isotopic Determinations via Laser-Induced Breakdown Spectroscopy/Laser Ablation–Multicollector–Inductively Coupled Plasma–Mass Spectrometry

Uranyl fluoride (UO 2 F 2 ) particles (<20 μm) were subjected to first-of-its-kind analysis via simultaneous laser-induced breakdown spectroscopy (LIBS) and laser ablation multi-collector inductively coupled plasma–mass spectrometry (LA–MC–ICP–MS). Briefly, a nanosecond pulsed high-energy laser was focused onto the sample (particle) surface. In a single laser pulse, the UO 2 F 2 particle was excited/ionized within the microplasma volume, and the emission of light was collected via fiber optics such that emission spectroscopy could be employed for the detection of uranium (U) and fluorine (F). The ablated particle was simultaneously transported into the MC–ICP–MS for high precision isotopic (i.e., 234 U, 235 U, and 238 U) analysis. This method, LIBS/LA–MC–ICP–MS was optimized and employed to rapidly measure 80+ UO 2 F 2 particles, which were subjected to different calcination processes, which results in varying degrees of F loss from the individual particles. In measuring the particles, the average F/U ratios for the populations treated at 100 and 500 °C were 2.78 ± 1.28 and 1.01 ± 0.50, respectively, confirming loss of F through the calcination process. The average 235 U/ 238 U on the particle populations for the 100 and 500 °C were 0.007262 (22) and 0.007231 (23), which was determined to be <0.2% from the expected value. The 234 U/ 238 U ratios on the same particles were 0.000053 (11) and 0.000050 (10) for the 100 and 500 °C, respectively, <10% from the expected value. Notably, each population was analyzed in under 5 min, demonstrating the truly rapid analysis technique presented here in this paper.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2024

Correlated Anion Disorder in Heteroanionic Cubic TiOF 2

Resolving anion configurations in heteroanionic materials is crucial for understanding and controlling their properties. For anion-disordered oxyfluorides, conventional Bragg diffraction cannot fully resolve the anionic structure, necessitating alternative structure determination methods. We have investigated the anionic structure of anion-disordered cubic (ReO 3 -type) TiOF 2 using X-ray pair distribution function (PDF), 19 F MAS NMR analysis, density functional theory (DFT), cluster expansion modeling, and genetic-algorithm structure prediction. Our computational data predict short-range anion ordering in TiOF 2 , characterized by predominant cis-[O 2 F 4 ] titanium coordination, resulting in correlated anion disorder at longer ranges. To validate our predictions, we generated partially disordered supercells using genetic-algorithm structure prediction and computed simulated X-ray PDF data and 19 F MAS NMR spectra, which we compared directly to experimental data. To construct our simulated 19 F NMR spectra, we derived new transformation functions for mapping calculated magnetic shieldings to predicted magnetic chemical shifts in titanium (oxy)fluorides, obtained by fitting DFT-calculated magnetic shieldings to previously published experimental chemical shift data for TiF 4 . We find good agreement between our simulated and experimental data, which supports our computationally predicted structural model and demonstrates the effectiveness of complementary experimental and computational techniques in resolving anionic structure in anion-disordered oxyfluorides. From additional DFT calculations, we predict that increasing anion disorder makes lithium intercalation more favorable by, on average, up to 2 eV, highlighting the significant effect of variations in short-range order on the intercalation properties of anion-disordered materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Activation of Semicore Electrons in Alkali Metals and Their Role in the B1–B2 Phase Transition under Pressure

Alkali fluorides are often thought of as archetypical ionic compounds whose structures can be understood in terms of the packing of rigid spheres. At ambient pressure, they assume the rocksalt (B1) structure, while under only a few GPa of pressure, the cesium chloride (B2) structure, with higher coordination numbers, is assumed for KF, RbF, and CsF. NaF requires almost 10 times more pressure to undergo this same phase transition, which has not been observed for LiF. Herein, we provide a detailed analysis, based upon quantum chemical calculations, explaining this behavior. We show that for the heavier alkali metals, the semicore p orbitals engage in metal-metal bonding in the B2 phase, facilitating the pressure-induced B1 → B2 structural transition. Furthermore, these findings suggest that the semicore orbitals of heavy alkali metals can be activated without the need of strong oxidants at very mild levels of compression, resulting in the formation of chemical bonds, challenging both traditional and modern core-valence distinctions. In addition, we argue that Cs 5p-5p bonding in CsCl occurs already at ambient pressure, stabilizing the B2 phase, and suggest experiments that may be able to detect signatures of such bonding.

Anions↗