Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Exchange”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29

Nanomaterials-Enhanced Electrically Switched Ion Exchange Process for Water Treatment

The objective of our work is to develop an electrically switched ion exchange (ESIX) system based on conducting polymer/carbon nanotube (CNT) nanocomposites as a new and cost-effective approach for removal of radioactive cesium, chromate, and perchlorate from contaminated groundwater. The ESIX technology combines ion exchange and electrochemistry to provide a selective, reversible method for the removal of target species from wastewater. In this technique, an electroactive ion exchange layer is deposited on a conducting substrate, and ion uptake and elution are controlled directly by modulation of the potential of the layer. ESIX offers the advantages of highly-efficient use of electrical energy combined with no secondary waste generation. Recently, we have improved upon the ESIX process by modifying the conducting substrate with carbon nanotubes prior to the deposition of the electroactive ion exchanger. The nanomaterial-based electroactive ion exchange technology will remove cesium-137, chromate, and perchlorate rapidly from wastewater. The high porosity and high surface area of the electroactive ion exchange nanocomposites results in high loading capacity and minimize interferences for non-target species. Since the ion adsorption/desorption is controlled electrically without generating a secondary waste, this electrically active ion exchange process is a green process technology that will greatly reduce operating costs.

54 ENVIRONMENTAL SCIENCES↗

Effect of Channel Configurations for Tritium Transfer in Printed Circuit Heat Exchangers

The Next Generation Nuclear Plant (NGNP), a very High temperature Gas-Cooled Reactor (VHTR) concept, will provide the first demonstration of a closed-loop Brayton cycle at a commercial scale of a few hundred megawatts electric and hydrogen production. The power conversion system (PCS) for the NGNP will take advantage of the significantly higher reactor outlet temperatures of the VHTR to provide higher efficiencies than can be achieved in the current generation of light water reactors. Besides demonstrating a system design that can be used directly for subsequent commercial deployment, the NGNP will demonstrate key technology elements that can be used in subsequent advanced power conversion systems for other Generation IV reactors. In anticipation of the design, development and procurement of an advanced power conversion system for the NGNP, the system integration of the NGNP and hydrogen plant was initiated to identify the important design and technology options that must be considered in evaluating the performance of the proposed NGNP. In the VHTR system, an intermediate heat exchanger (IHX), which transfers heat from the reactor core to the electricity or hydrogen production system is one key component, and its effectiveness is directly related to the system overall efficiency. In the VHTRs, the gas fluids used for coolant generally have poor heat transfer capability, so it requires very large surface area for a given condition. For this reason, a compact heat exchanger (CHE), which is widely used in industry especially for gasto-gas or gas-to-liquid heat exchange is considered as a potential candidate for an IHX replacing the classical shell and tube type heat exchanger. A compact heat exchanger is arbitrary referred to be a heat exchanger having a surface area density greater than 700 m2/m3. The compactness is usually achieved by fins and micro-channels, and leads to the enormous heat transfer enhancement and size reduction. The surface area density is the total heat transfer area divided by the volume of the heat exchanger. In the case of PCHE units, the heat transfer surface area density may be as high as 2,500 m2/m3. This high compactness implies an appreciable reduction in material reducing cost. In this study, heat transfer and tritium penetration analyses have been performed for two different channel configurations of the PCHE; (1) standard and (2) off-set. One of the goals of this study was to determine whether offsetting the hot and cold streams would significantly reduce the tritium flux, and whether or not it would affect the heat transfer significantly.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Selectivity, Kinetics, and Efficiency of Reversible Anion Exchange with TcO 4 - in a Supertetrahedral Cationic Framework

[ThB5O6(OH)6][BO(OH)2]·2.5H2O (Notre Dame Thorium Borate-1, NDTB-1) is an inorganic supertetrahedral cationic framework material that is derived from boric acid flux reactions. NDTB-1 exhibits facile single crystal to single crystal anion exchange with a variety of common anions such as Cl-, Br-, NO3-, IO3-, ClO4-, MnO4-, and CrO42-. More importantly, NDTB-1 is selective for the removal of TcO4- from nuclear waste streams even though there are large excesses of competing anions such as Cl-, NO3-, and NO2-. Competing anion exchange experiments and magic-angle spinning (MAS)-NMR spectroscopy of anion-exchanged NDTB-1 demonstrate that this unprecedented selectivity originates from the ability of NDTB-1 to trap TcO4- within cavities, whereas others remain mobile within channels in the material. The exchange kinetics of TcO4- in NDTB-1 are second-order with the rate constant k2 of 0.059 s-1 M-1. The anion exchange capacity of NDTB-1 for TcO4- is 162.2 mg g-1 (0.5421 mol mol-1) with a maximum distribution coefficient Kd of 1.0534 × 104 mL g-1. Finally, it is demonstrated that the exchange for TcO4- in NDTB-1 is reversible. TcO4- trapped in NDTB-1 can be exchanged out using higher-charged anions with a similar size such as PO43- and SeO42-, and therefore the material can be easily recycled and reused.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Regio-Selective Intramolecular Hydrogen/Deuterium Exchange in Gas-Phase Electron Transfer Dissociation

Protein backbone amide hydrogen/deuterium exchange mass spectrometry (HDX-MS) typically utilizes enzymatic digestion after the exchange reaction and before MS analysis to improve data resolution. Gas-phase fragmentation of a peptic fragment prior to MS analysis is a promising technique to further increase the resolution. The biggest technical challenge for this method is elimination of intramolecular hydrogen/deuterium exchange (scrambling) in the gas phase. The scrambling obscures the location of deuterium. Jørgensen’s group pioneered a method to minimize the scrambling in gas-phase electron capture/transfer dissociation. Despite active investigation, the mechanism of hydrogen scrambling is not well-understood. The difficulty stems from the fact that the degree of hydrogen scrambling depends on instruments, various parameters of mass analysis, and peptide analyzed. In most hydrogen scrambling investigations, the hydrogen scrambling is measured by the percentage of scrambling in a whole molecule. This paper demonstrates that the degree of intramolecular hydrogen/deuterium exchange depends on the nature of exchangeable hydrogen sites. The deuterium on Tyr amide of neurotensin (9–13), Arg-Pro-Tyr-Ile-Leu, migrated significantly faster than that on Ile or Leu amides, indicating the loss of deuterium from the original sites is not mere randomization of hydrogen and deuterium but more site-specific phenomena. This more precise approach may help understand the mechanism of intramolecular hydrogen exchange and provide higher confidence for the parameter optimization to eliminate intramolecular hydrogen/deuterium exchange during gas-phase fragmentation. .

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Life cycle assessment of novel heat exchanger for dry cooling of power plants based on encapsulated phase change materials

Cooling systems in power plants account for approximately 40% of total freshwater withdrawals in the U.S. Due to dwindling access to freshwater resources worldwide, continued operation of wet cooling systems poses a significant engineering challenge. To reduce water consumption, a novel air-cooled heat exchanger has been developed using encapsulated phase change material (EPCM) for dry cooling of power plants. Compared to traditional finned-tube air-cooled condensers, this novel EPCM heat exchanger improves the heat transfer coefficient and power plant efficiency while reducing the pressure drop and cooling system cost. Life cycle assessment (LCA) and techno-economic analysis (TEA) are used to evaluate the environmental and economic performance of EPCM heat exchangers from cradle-to-grave and to compare them to wet cooling and traditional air-cooled condensers. A thermodynamic model is developed to predict the EPCM heat exchanger performance for plant-scale operations. Equipment and construction costs for heat exchangers are estimated based on design parameters obtained from the thermodynamic model. Both process-LCA and economic-input–output LCA are used to simulate and test the sensitivity of EPCM alternatives with commercial wet and dry cooling technologies. We investigate options for EPCM end-of-life management upon retiring the heat exchanger and construct a process-based LCA model to estimate a greenhouse gas (GHG) emissions credit for recycling the EPCM. The life cycle GHG emission of the novel dry cooling technology is 1.16 kg CO 2 eq. /MWh compared with the 1.1–4.3 kg CO 2 eq. /MWh reported for commercial dry cooling technologies and consumes 9.5 L/MWh e of water for cradle-to-gate life cycle, which is significantly lower than that of wet cooling systems. The TEA shows many advantages of EPCM cooling technology over the state-of-art dry cooling solutions. Overall, the EPCM heat exchanger provides a better alternative compared to existing dry cooling and wet cooling technologies.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Polymer heat exchanger design for condensing boiler applications

Condensing boilers achieve very high efficiency levels by recovering both sensible heat and water vapor latent heat from the flue gas. Research since the 1980's has focused on corrosion in such condensing heat exchangers related to the acidic condensate and material selection. Polymers in condensing heat exchangers have been considered to avoid the cost and corrosion concerns of metallic designs. Past efforts have shown that polymers offer the advantage of corrosion resistance and cost, however, lower thermal conductivity limited their application. More recent developments have introduced thermally conductive polymers which now offer promising conductivity values. This project focused on the evaluation of a thermally conductive polymer heat exchanger for this application. Computational fluid dynamic results indicated thermal conductivity values of stainless steel, a typical heat exchanger material, do not need to be achieved for similar heat transfer performance. An increase in thermal conductivity from about 10 times that of the base polymer can achieve an overall heat exchanger effectiveness similar to that achieved with stainless steel. A polymer composite thermal conductivity of approximately 2.5 W/m∙K would be adequate. Thermally conductive polymer materials are now commercially available which offer values up to 20 W/m∙K. In this work, one Nylon-12 and one thermally conductive polymer composite heat exchanger prototypes were constructed for a condensing boiler application. In conclusion, tests demonstrated that good overall heat transfer performance was achieved. The lower thermal conductivity of the polymer heat exchanger will lead to higher surface temperatures and lower water condensation rates.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Synthesis, characterization and evaluation of nano-zirconium vanadate ion exchanger by using three different preparation techniques

Sol-gel, homogeneous precipitation and hydrothermal synthesis are three different preparation techniques have been used as an attempt to synthesize nano-zirconium vanadate with properties suitable to be used as ion exchangers. The impact of the synthetic preparation variables such as the reactant concentrations, reaction temperature and reaction time on the ion exchange capacity of the produced ion exchanger has been considered for each preparation technique. One sample from each preparation technique having the largest ion exchange capacity has been selected to be physically and chemically characterized using various analytical techniques such as XRD, TGA, DSC, pH titration, FTIR and SEM in order to determine the properties of the ion exchanger produced from each technique. For all the studied ZrV samples it can be presumed that they have the ion exchange affinity sequences for alkali metal ions K > Na > Li, the order for the alkaline earth metals is Ba > Ca > Mg and their affinity for radioactive metals follow Cs > Sr. Moreover, the prepared materials are of high thermal and radiation stabilities. Also they have high chemical stabilities toward wide concentration ranges of acid, basic as well as polar solvents. It has been deduced from the X-ray analysis that ZrV produced from the sol-gel technique has an amorphous structural. While those produced from the homogeneous precipitation and hydrothermal synthesis techniques, in the nano-scale have semi-crystalline structural. Furthermore, SEM confirms that particle size of the all studied prepared ZrV samples have nano-diameters of range 50-60 nm. Specific surface area of the three different prepared ion exchangers are found to be equal to 187, 192 and 320 m{sup 2}/g for sol-gel, homogeneous precipitation and hydrothermal, respectively. A tentative structural formula of Zr(OH){sub 2}(HVO{sub 4}){sub 2}.2H{sub 2}O has been proposed for all studied samples on the basis of on FTIR, DSC and TGA results.

36 MATERIALS SCIENCE↗

Toxicodynamics of rigid polystyrene microparticles on pulmonary gas exchange in mice: Implications for microemboli-based drug delivery systems

The toxicodynamic relationship between the number and size of pulmonary microemboli resulting from uniformly sized, rigid polystyrene microparticles (MPs) administered intravenously and their potential effects on pulmonary gas exchange were investigated. CD-1 male mice (6–8 weeks) were intravenously administered 10, 25 and 45 μm diameter MPs. Oxygen hemoglobin saturation in the blood (SpO{sub 2}) was measured non-invasively using a pulse oximeter while varying inhaled oxygen concentration (F{sub I}O{sub 2}). The resulting data were fit to a physiologically based non-linear mathematical model that estimates 2 parameters: ventilation–perfusion ratio (V{sub A}/Q) and shunt (percentage of deoxygenated blood returning to systemic circulation). The number of MPs administered prior to a statistically significant reduction in normalized V{sub A}/Q was dependent on particle size. MP doses that resulted in a significant reduction in normalized V{sub A}/Q one day post-treatment were 4000, 40,000 and 550,000 MPs/g for 45, 25 and 10 μm MPs, respectively. The model estimated V{sub A}/Q and shunt returned to baseline levels 7 days post-treatment. Measuring SpO{sub 2} alone was not sufficient to observe changes in gas exchange; however, when combined with model-derived V{sub A}/Q and shunt early reversible toxicity from pulmonary microemboli was detected suggesting that the model and physical measurements are both required for assessing toxicity. Moreover, it appears that the MP load required to alter gas exchange in a mouse prior to lethality is significantly higher than the anticipated required MP dose for effective drug delivery. Overall, the current results indicate that the microemboli-based approach for targeted pulmonary drug delivery is potentially safe and should be further explored. -- Highlights: ► Murine pulmonary gas exchange after microembolization was non-invasively studied. ► A physiologically based model quantified impairment of pulmonary gas exchange. ► Number and size of microemboli determine severity of impaired gas exchange. ► Pulmonary gas exchange returns to baseline within 7 days.

60 APPLIED LIFE SCIENCES↗

In Situ Cs and H Exchange into Gaidonnayite and Proposed Mechanisms of Ion Diffusion

Here, the microporous mineral gaidonnayite Na 2 ZrSi 3 O 9 ·2H 2 O was studied to better understand its ion-exchange mechanisms, specifically for Cs + and H + ions. In situ Raman spectroscopy, in situ X-ray diffraction (XRD), simultaneous thermogravimetric analysis and differential scanning calorimetry (TGA/DSC), and in situ X-ray fluorescence were used to determine the exchange processes involved. The Raman spectra contain strong peaks that can be attributed to the vibrational modes for the 3MR symmetric stretch at 500 cm –1 , Si–O–Zr–O chain stretches at 938 cm –1 , and Si–O stretching in the 1000–1100 cm –1 range. The most prominent Raman shift during ion exchange is found near the 520 cm –1 peak, which corresponds to distortions of the 3MR substructure of gaidonnayite. In all instances of this study, the 3MR exhibited the highest amount of distortion during ion exchange, and the evolution of this distortion is compared to unit-cell changes as measured from XRD data and elemental changes via XRF. The correlations between the Raman, XRD, and XRF data show rapid deformation of the 3MR during the onset of H + ion exchange in the Na form of gaidonnayite. Even when unit-cell volume changes were small (<3 Å 3 ) as in the cases for Cs + into Na-gaidonnayite and Cs + into H-gaidonnayite, significant changes in the ≈520 cm –1 peak were measured. By comparing XRD data and Raman data, and verifying the cation uptake by XRF, we were able to identify and confirm conformational changes and distortions in the crystal structure before, during, and after Cs + and H + exchange. Finally, Cs exchange occurred the fastest and with the greatest capacity when starting in the H-form at room temperature, and at elevated temperatures when starting in the Na-form.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Inelastic Neutron Scattering Study of Magnetic Exchange Pathways in MnS

We report an investigation of the magnetic structure and magnetic exchange pathways in MnS via neutron scattering methods, aided by density functional theory (DFT) modeling. The material has been confirmed to undergo antiferromagnetic (AFM) ordering at 152 K, with the magnetic structure representing AFM stacking of ferromagnetic (FM) (111) planes of Mn magnetic moments. Correspondingly, the magnetic structure is described by a propagation vector k = (1/2, 1/2, 1/2), with the volume of the magnetic unit cell being 8 times larger than the volume of the nuclear unit cell. Analysis of inelastic neutron scattering (INS) data collected on a powder sample of MnS revealed that the next-nearest-neighbor magnetic exchange constant (J 2 ) exceeds the nearest-neighbor exchange constant (J 1 ) by more than 3 times, while in the case of MnO, which exhibits the same nuclear and magnetic structures as MnS, the J 2 /J 1 ratio was reported to be below 1.5. Although for MnO the signs of both J 1 and J 2 indicated AFM exchange interactions, machine-learning INS data analysis in combination with DFT calculations suggests that the INS data collected on MnS are best described with J 1 < 0 and J 2 > 0, corresponding to FM and AFM exchange couplings, respectively. To achieve a satisfactory fit to the experimentally observed data, the Hamiltonian used to model the INS spectra also included the next-next-nearest-neighbor magnetic exchange constant (J 3 ). The best-fit model has been obtained with the values of the exchange constants J 1 = -0.27 meV, J 2 = 1.05 meV, and J 3 = -0.19 meV.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Kinetics of hydrogen isotope exchange in β-phase Pd-H-D

Hydrogen isotope gas exchange within palladium powders is examined using a batch-type reactor coupled to a residual gas analyzer (RGA). Furthermore, the exchange rates in both directions (H 2 + PdD and D 2 + PdH) are measured in the temperature range 178–323 K for the samples with different particle sizes. The results show this batch-type exchange is closely approximated as a first-order kinetic process with a rate directly proportional to the surface area of the powder particles. An exchange rate constant of 1.40 ± 0.24 μmol H 2 /atm cm 2 s is found for H 2 + PdD at 298 K, 1.4 times higher than that for D 2 + PdH, with an activation energy of 25.0 ± 3.2 kJ/mol H for both exchange directions. Finally, a comparison of exchange measurement techniques shows these coefficients, and the fundamental exchange probabilities are in good agreement with those obtained by NMR and flow techniques.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Addition of Corona Block Homopolymer Retards Chain Exchange in Solutions of Block Copolymer Micelles

The exchange of copolymer chains between 1 vol % PS–PEP (poly(styrene-b-ethylene-alt-propylene)) diblock copolymer micelles in squalane (selective for PEP) is investigated in this work using time-resolved small-angle neutron scattering (TR-SANS) as a function of added PEP homopolymer. The solvent squalane, C 30 H 62 , is substituted in part or completely with PEP homopolymers that are the same molecular weight as the corona blocks. Polymer solutions/mixtures (1 vol % PS–PEP, plus 2, 7, or 15 vol % PEP in squalane, and 1 vol % PS–PEP in PEP) were separately prepared using normal (h-PS) or deuterated equivalent (d-PS) PS–PEP diblock copolymers. The solvent was contrast matched to a 50/50 mixed h-/d-PS micelle core, so that the scattering intensity decays with the mixing of h- and d-PS–PEP chains undergoing exchange between micelles. The chain exchange rate can therefore be assessed quantitatively. As the concentration of added homopolymer in solution increases above the overlap concentration of PEP chains, the chain exchange rate drops significantly. The results are compared to an earlier study of chain exchange between PS–PEP micelles in a 15% solution in squalane, which was also found to be significantly slower than when the solution is dilute. The primary factor in this slowing down of chain exchange is an increased screening of excluded volume interactions among the corona blocks. The role of increasing micelle aggregation number with PEP concentration is found not to be the dominant effect up to 15% added PEP but may play an increasingly important role in the PEP melt matrix, where no chain exchange could be detected in these experiments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

In Situ Tracking Kinetic Pathways of Li + /Na + Substitution during Ion-Exchange Synthesis of Li x Na 1.5– x VOPO 4 F 0.5

Ion exchange is a ubiquitous phenomenon central to wide industrial applications, ranging from traditional (bio)chemical separation to the emerging chimie douce synthesis of materials for batteries and other energy applications. The exchange process is complex, involving substitution and transport of different ions under non-equilibrium conditions, and thus difficult to probe, leaving a gap in mechanistic understanding of kinetic exchange pathways toward final products. Herein, we report in situ tracking kinetic pathways of Li + /Na + substitution during solvothermal ion-exchange synthesis of Li x Na 1.5-x VOPO 4 F 0.5 (0 ≤ x ≤ 1.5), a promising multi-Li polyanionic cathode for batteries. The real-time observation, corroborated by first-principles calculations, reveals a selective replacement of Na + by Li + , leading to peculiar Na + /Li + /vacancy orderings in the intermediates. Contradicting the traditional belief of facile topotactic substitution via solid solution reaction, an abrupt two-phase transformation occurs and predominantly governs the kinetics of ion exchange and transport in the 1D polyanionic framework, consequently leading to significant difference of Li stoichiometry and electrochemical properties in the exchanged products. The findings may help to pave the way for rational design of ion exchange synthesis for making new materials.

25 ENERGY STORAGE↗

Sinuosity‐Driven Hyporheic Exchange: Hydrodynamics and Biogeochemical Potentials

Abstract Hydrologic exchange processes are critical for ecosystem services along river corridors. Meandering contributes to this exchange by driving channel water, solutes, and energy through the surrounding alluvium, a process called sinuosity‐driven hyporheic exchange. This exchange is embedded within and modulated by the regional groundwater flow (RGF), which compresses the hyporheic zone and potentially diminishes its overall impact. Quantifying the role of sinuosity‐driven hyporheic exchange at the reach‐to‐watershed scale requires a mechanistic understanding of the interplay between drivers (meander planform) and modulators (RGF) and its implications for biogeochemical transformations. Here, we use a 2D, vertically integrated numerical model for flow, transport, and reaction to analyze sinuosity‐driven hyporheic exchange systematically. Using this model, we propose a dimensionless framework to explore the role of meander planform and RGF in hydrodynamics and how they constrain nitrogen cycling. Our results highlight the importance of meander topology for water flow and age. We demonstrate how the meander neck induces a shielding effect that protects the hyporheic zone against RGF, imposing a physical constraint on biogeochemical transformations. Furthermore, we explore the conditions when a meander acts as a net nitrogen source or sink. This transition in the net biogeochemical potential is described by a handful of dimensionless physical and biogeochemical parameters that can be measured or constrained from literature and remote sensing. This work provides a new physically based model that quantifies sinuosity‐driven hyporheic exchange and biogeochemical reactions, a critical step toward their representation in water quality models and the design and assessment of river restoration strategies.

54 ENVIRONMENTAL SCIENCES↗

Intercalation–exfoliation processes during ionic exchange reactions from sodium lepidocrocite-type titanate toward a proton-based trititanate structure

Topochemical reactions involving ionic exchange have been used to assess a large number of metastable compositions, particularly in layered metal oxides. This method encompasses complex reactions that are poorly explored, yet are of prime importance to understand and control the materials’ properties. In this work, we embark on investigating the reactions involved during the ionic exchange between a layered Na-titanate (lepidocrocite-type structure) and an acidic solution (HCl), leading to a protonic (H 3 O + ) titanate (trititanate structure). The reactions involve an ionic exchange provoking a structural change from the lepidocrocite-type to the trititanate structure as shown by real-space refinements of ex situ pair distribution function data. Mobile Na + ions are exchanged by hydronium ions inducing high proton mobility in the final structure. Moreover, the reaction was followed by ex situ 23 Na and 1 H solid-state MAS NMR which allowed, among other things, confirming that the Na + ions are in the interlayer space and specifying their local environment. Strikingly, the ionic exchange reaction induces progressive exfoliation of the Na-titanate particles leading to 2–5 nm thin elongated crystallites. To further understand the different steps associated with the ionic exchange, the evolution of the electrolytic conductivity, using conductimetric titration, has been monitored upon HCl addition, enabling characterization of the intercalation(H + )/de-intercalation(Na + ) reactions and assessing kinetic parameters. Accordingly, it is hypothesized that the exfoliation of the particles is due to the accumulation of charges at the particle level in relation to the rapid intercalation of protons. This work provides novel insights into ionic exchange reactions involved in layered oxide compounds.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Doping dependent magnetism and exchange bias in CaMn{sub 1−x}W{sub x}O{sub 3} manganites

Magnetic properties of CaMn{sub 1−x}W{sub x}O{sub 3} (0 ≤ x ≤ 0.1) have been investigated, and the research was focused on the exchange bias (EB) phenomenon in CaMn{sub 0.93}W{sub 0.07}O{sub 3}. Magnetic ground state was found to be dependent on tungsten doping level and the following states were distinguished: (i) G-type antiferromagnetic (AFM) state with a weak ferromagnetic (FM) component at x = 0 and 0.04; (ii) mostly orbitally ordered C-type AFM at x = 0.07 and 0.1. For the studied manganites, spontaneous magnetization increases sharply with increasing doping level reaching M{sub 0} ≈ 9.5 emu/g at T = 10 K for x = 0.04, and then decreases rapidly reaching zero for x = 0.1. Exchange bias effect, manifested by vertical and horizontal shifts in the hysteresis loop for field cooled sample, has been observed in CaMn{sub 0.93}W{sub 0.07}O{sub 3}. Exchange bias field, coercivity, remanence asymmetry, and magnetic coercivity depend strongly on temperature, cooling field, and maximal measuring field. Horizontal and vertical shifts of magnetization loop sharply decrease with increasing temperature and vanish above 70 K, whereas coercivity and magnetic coercivity disappear only above 100 K (temperature of transition to the G-type AFM state). The exchange bias field H{sub EB} increases with increasing cooling field H{sub cool} and goes through a broad maximum at 40 kOe, while the remanence asymmetry increases monotonously in the entire investigated cooling field range, up to 50 kOe. For the compound with x = 0.07, the size of the FM regions ≈2 nm was estimated from the dependence of exchange bias field H{sub EB} upon H{sub cool}. It is suggested that the exchange bias originates from interface exchange coupling between small FM clusters and the G-type AFM phase inside the primary C-type orbitally ordered AFM phase.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Controllable exchange bias in Fe/metamagnetic FeRh bilayers

We report the studies of tuning the exchange bias at ferromagnetic Fe/metamagnetic FeRh bilayer interfaces. Fe/FeRh(111) bilayers show exchange bias in the antiferromagnetic state of FeRh while no exchange bias occurs at Fe/FeRh(001) interface. The contrasting results are attributed to the spin configurations of FeRh at the interface, i.e., the uncompensated ferromagnetic spin configuration of FeRh appears exclusively for (111) orientation. The exchange bias disappears as the bilayers are warmed above the antiferromagnetic-ferromagnetic transition temperature. The direction of the exchange bias for Fe/FeRh(111) is also found to be perpendicular to the cooling-field direction, in contrast to the commonly observed direction of exchange bias for ferromagnetic/antiferromagnetic interfaces. In view of these results, the exchange bias in Fe/FeRh bilayers with the (111) crystallographic orientation should be useful for the design of rapid writing technology for magnetic information devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Influence of growth conditions on exchange bias of NiMn-based spin valves

As shown in previous investigations, a correlation between a NiMn-based spin valve's thermal stability and its inherent exchange bias exists, even if the blocking temperature of the antiferromagnet is clearly above the heating temperature and the reason for thermal degradation is mainly diffusion and not the loss of exchange bias. Samples with high exchange bias are thermally more stable than samples with low exchange bias. Those structures promoting a high exchange bias are seemingly the same suppressing thermally induced diffusion processes (A. Wienecke and L. Rissing, “Relationship between thermal stability and layer-stack/structure of NiMn-based GMR systems,” in IEEE Transaction on Magnetic Conference (EMSA 2014)). Many investigations were carried out on the influence of the sputtering parameters as well as the layer thickness on the magnetoresistive effect. The influence of these parameters on the exchange bias and the sample's thermal stability, respectively, was hardly taken into account. The investigation described here concentrates on the last named issue. The focus lies on the influence of the sputtering parameters and layer thickness of the “starting layers” in the stack and the layers forming the (synthetic) antiferromagnet. This paper includes a guideline for the evaluated sputtering conditions and layer thicknesses to realize a high exchange bias and presumably good thermal stability for NiMn-based spin valves with a synthetic antiferromagnet.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗