Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Environmental Effects”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29

Further Investigations of the Passive Optical Sample Assembly (POSA) - I Flight Experiment

The Passive Optical Sample Assembly-I (POSA-I), part of the Mir Environmental Effects Payload (MEEP), was designed to study the combined effects of contamination, atomic oxygen, ultraviolet radiation, vacuum, then-nal cycling, and other constituents of the space environment on spacecraft materials. The MEEP program is a Phase I International Space Station Risk Mitigation Experiment. Candidate materials for the International Space Station (ISS) were exposed in a specially designed "suitcase" carrier, with identical specimens facing either Mir or space. The payload was attached by EVA to the exterior of the Mir docking module during the STS-76 mission (f'ig. 1). It was removed during the STS-86 mission after an 18-month exposure. During the mission, it received approximately 7 x 1019 atoMS/CM2 atomic oxygen, as calculated by polymer mass loss, and 413 ESH of solar ultraviolet radiation on the Mir-facing side. The side facing away from Mir received significant contaminant deposition, so atomic oxygen fluence has not been reliably determined. The side facing away from Mir received 571 ESH of solar UV. Contamination was observed on both the Mir-facing and space-facing sides of the POSA-I experiment , with a greater amount of deposition on the space facing side than the Mir side. The contamination has been determined to be outgassed silicone photofixed by ultraviolet radiation and converted to silicate by atomic oxygen interaction. Electron spectroscopy for chemical analysis (ESCA) with depth profiling indicated the presence of 26 - 31 nm silicate on the Mir-facing side and 500 - 1000 nm silicate on the space-facing side. The depth profiling also showed that the contaminant layer was uniform, with a small amount of carbon present on the surface and trace amounts of nitrogen, phosphorus, sulfur, and tin. The surface carbon layer is likely due to post-flight exposure in the laboratory and is similar to carbonaceous deposits on control samples. EDAX and FTIR analysis concurred with ESCA for the presence of silicon, oxygen, and carbon. Nearly 400 samples were exposed on POSA-I, which included materials such as thermal control coatings polymeric films, optical materials, and multi-layer insulation blankets. A previous paper discussed the effects of the space environment exposure and contaminant deposition on candidate materials for ISS, including Z93P inorganic thermal control coating, various anodizes, and multi-layer insulation blankets. This paper details the investigation of environmental effects on the remainder of POSA-I samples, particularly the innovative conductive thermal control coatings developed by AZ Technology of Huntsville, AL and HT Research Institute of Chicago, IL. The silicone/silicate contamination had a significant impact on the solar absorptance of white inorganic thermal control coatings on the space-facing side of POSA-I. The effect of contamination on electrical conductivity is discussed. Samples of conductive anodized aluminum developed by Boundary Technologies of Buffalo Grove, IL were also exposed on POSA-I. The effects of the space environment and contaminant deposition on the optical and electrical properties of the conductive anodized aluminum are discussed.

Finckenor, Miria M.↗

LDEF polymeric materials: A summary of Langley characterization

The NASA Long Duration Exposure Facility (LDEF) enabled the exposure of a wide variety of materials to the low earth orbit (LEO) environment. This paper provides a summary of research conducted at the Langley Research Center into the response of selected LDEF polymers to this environment. Materials examined include graphite fiber reinforced epoxy, polysulfone, and additional polyimide matrix composites, films of FEP Teflon, Kapton, several experimental high performance polyimides, and films of more traditional polymers such as poly(vinyl toluene) and polystyrene. Exposure duration was either 10 months or 5.8 years. Flight and control specimens were characterized by a number of analytical techniques including ultraviolet-visible and infrared spectroscopy, thermal analysis, scanning electron and scanning tunneling microscopy, x-ray photoelectron spectroscopy, and, in some instances, selected solution property measurements. Characterized effects were found to be primarily surface phenomena. These effects included atomic oxygen-induced erosion of unprotected surfaces and ultraviolet-induced discoloration and changes in selected molecular level parameters. No gross changes in molecular structure or glass transition temperature were noted. The intent of this characterization is to increase our fundamental knowledge of space environmental effects as an aid in developing new and improved polymers for space application. A secondary objective is to develop benchmarks to enhance our methodology for the ground-based simulation of environmental effects so that polymer performance in space can be more reliably predicted.

Young, Philip R.↗

Recent Results of NASA's Space Environments and Effects Program

The Space Environments and Effects (SEE) Program is a multi-center multi-agency program managed by the NASA Marshall Space Flight Center. The program evolved from the Long Duration Exposure Facility (LDEF), analysis of LDEF data, and recognition of the importance of the environments and environmental effects on future space missions. It is a very comprehensive and focused approach to understanding the space environments, to define the best techniques for both flight and ground-based experimentation, to update the models which predict both the environments and the environmental effects on spacecraft, and finally to ensure that this information is properly maintained and inserted into spacecraft design programs. Formal funding of the SEE Program began initially in FY95. A NASA Research Announcement (NRA) solicited research proposals in the following categories: 1) Engineering environment definitions; 2) Environments and effects design guidelines; 3) Environments and effects assessment models and databases; and, 4) Flight/ground simulation/technology assessment data. This solicitation resulted in funding for eighteen technology development activities (TDA's). This paper will present and describe technical results rom the first set of TDA's of the SEE Program. It will also describe the second set of technology development activities which are expected to begin in January 1998. These new technology development activities will enable the SEE Program to start numerous new development activities in support of mission customer needs.

Minor, Jody L.↗

Nuclear Safety [Vol. 32, No. 4, October-December 1991]

Nuclear Safety is a review journal that covers significant developments in the field of nuclear safety. Its scope includes the analysis and control of hazards associated with nuclear energy, operations involving fissionable materials, and the products of nuclear fission and their effects on the environment. Primary emphasis is on safety in reactor design, construction, and operation; however, the safety aspects of the entire fuel cycle, including fuel fabrication, spent-fuel processing, nuclear waste disposal, handling of radioisotopes, and environmental effects of these operations, are also treated. Table of Contents for this issue follows. GENERAL SAFETY CONSIDERATIONS: 477 Report on the International Symposium on the Use of Probabilistic Safety Assessment for Operational Safety—PSA '91, S. Chakraborty and M. Khatib-Rahbar; 488 Good Relationships Are Pivotal in Nuclear Data Bases, A. S. Heger and B. V. Koen; 494 Technical Note: The Interagency Nuclear Safety Review Panel's Evaluation of the Ulysses Space Mission, J. A. Sholtis, Jr., D. A. Huff, L. B. Gray, N. P. Klug, and R. O. Winchester; ACCIDENT ANALYSIS: 502 The Severe Accident Analysis Program for the Savannah River Nuclear Production Reactors, M. L. Hyder; CONTROL AND INSTRUMENTATION: 511 A Framework for Selecting Suitable Control Technologies for Nuclear Power Plant Systems, R. A. Kisner; DESIGN FEATURES: 521 Containments for Gas-Cooled Power Reactors History and Status, P.W. Williams; ENVIRONMENTAL EFFECTS: 537 Indoor Radon: A Natural Risk, N. H. Harley and J.H. Harley; On the Importance of the Atmospheric Parameters in the Fission Products Distribution of a Severe Reactor Accident, M. C. Barla and A. R. Bayulken; Book Review: Health Effects of Exposure to Low Levels of Ionizing Radiation BEIR V, C. R. Richmond; WASTE AND SPENT FUEL MANAGEMENT: 555 Activities Related to Waste and Spent Fuel Management, M. D. Muhlheim and E. G. Silver OPERATING EXPERIENCES: 567 Effects of Component Aging on the Westhinghouse Control Rod Drive System, K. Sullivan and W. Gunther; 577 Reactor Shutdown Experience, Compiled by J. W. Cletcher, 580 Selected Safety-Related Events, Compiled by G. A. Murphy; 582 Operating U 8 Power Reactors, Compiled by M. D. Muhlheim and E. G. Silver, RECENT DEVELOPMENTS: 596 General Administrative Activities, Compiled by M. D. Muhlheim and E. G. Silver; 610 Reports, Standards, and Safety Guides, D. S. Queener; 614 Proposed Rule Changes as of June 30, 1991; ANNOUNCEMENTS: 520 Workshop on PC PRAISE: A Probabilistic Fracture Mechanics Personal Computer Code for Nuclear Power Plant Piping Reliability Assessment; 536 Fifth Workshop on Nuclear Power Plant Containment Integrity; 624 New OECD "International Information System on Occupational Exposure (ISOE)"; 625 Harvard School of Public Health Announces Short Courses; 625 Eighth Power Plant Dynamics, Control and Testing Symposium; 626 Second Training Course on Off-Site Emergency Planning and Response for Nuclear Accidents; 618 The Authors; 622 Reviewers of Nuclear Safety, Vol 32.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Time-Dependent Complete Active Space Embedded in Polarizable Force Field

Electron correlation and environmental effects play important roles in electron dynamics and spectroscopic observables of chemical systems in condensed phase. In this paper, we present a time-dependent complete active space configuration interaction (TD-CASCI) approach embedded in a polaraizable force filed, MMPol. The present implementation of TD-CASCI/MMPol utilizes a direct matrix-vector contraction, allowing studies of large systems. This scheme is used to study the solvatochromic shift of coumarin 153 in methanol. The TD-CASCI/MMPol approach captures the double excitation character in the excited state wave function and accurately predicts the solvatochromic red-shift of coumarin 153 dye within the experimental range, outperforming linear response time-dependent density functional theory. The effect of using different reference orbitals for the TD-CASCI/MMPol simulation is also investigated, highlighting the need for an unbiased treatment of all electronic states in the energy range of interest.

Liu, Hongbin↗

On the indiscriminate use of imported emission factors in environmental impact assessment: A case study in Chile

Environmental Impact Assessment (EIA) aims to determine if the environmental effect of an activity or project complies with standards and regulations. A primary component of the environment to evaluate is air and the effect that various activities can have on its quality. To this end, emission factors (EFs), which are empirical coefficients or mathematical relationships, are normally used. The present research critically analyzes the implications and consequences of using imported EFs in environmental impact studies (EISs), taking as case of study the situation in Chile. Among the main results, the widespread use of EFs in EISs in the country and the lack of assessments of their actual applicability stand out. In addition, the official guidelines related to emissions estimation that are used for EIA in the country mostly include EFs derived elsewhere, without considering the recommendations or restrictions that the original sources indicate for their use. Finally, the broad use of default values defined for the Metropolitan Region in Central Chile, is highly questionable for a country that extends north-south along more than 35° of latitude, with wide variability in climate, traffic conditions, population, soil types, etc. Finally, it is very likely that situations similar to those observed in the present work occurs in other countries with young environmental impact assessment systems, and therefore, that the results herein presented should be of general interest and relevance. - Highlights: • Emission factors are widely used in environmental impact assessment in Chile. • There is a lack of a proper understanding of the limitations of EFs for EIA. • Imported emission factors use requires caution and full understanding. • Misuse of foreign EFs may have serious environmental and economic consequences.

54 ENVIRONMENTAL SCIENCES↗

Case Study of Water-Soluble Metal Containing Organic Constituents of Biomass Burning Aerosol

Natural and prescribed biomass fires are a major source of aerosols that may persist in the atmosphere for several weeks. Biomass burning aerosols (BBA) can be associated with long-range transport of water-soluble N-, S-, P-, and metal-containing species. In this study, BBA samples were collected using a particle-into-liquid sampler (PILS) from laboratory burns of vegetation collected on military bases in the southeastern and southwestern United States. The samples were then analyzed using high resolution electrospray ionization mass spectrometry (ESI/HR-MS) that enabled accurate mass measurements for hundreds of species with m/z values between 70 and 1000 and assignment of elemental formulas. Mg, Al, Ca, Cr, Mn, Fe, Ni, Cu, Zn, and Ba-containing organometallic species were identified. The results suggest that the biomass may have accumulated metal-containing species that were re-emitted during biomass burning. Finally, further research into the sources, dispersion, and persistence of metal-containing aerosols, as well as their environmental effects, is needed.

09 BIOMASS FUELS↗

Simplified procedures for designing adhesively bonded composite joints

Procedures for the preliminary design of composite adhesive joints are described. Typical joints, their respective free body diagrams, and approximate equations for estimating the stresses in each of these typical joints are summarized. Equations are also presented to check the critical conditions of the joint such as minimum length, maximum adhesive shear stress, and peel-off stress. To illustrate the procedure, sample designs are described in step-by-step fashion for a butt joint with single doubler subjected to static loads, cyclic loads, and environmental effects. The results show that unsymmetric adhesive joints are inefficient and should be avoided, and hygrothermal environments and cyclic loads dramatically reduce the structural integrity of the joint and require several joint lengths compared with those for static load with no environmental effects.

Chamis, C. C.↗

Simplified procedures for designing adhesively bonded composite joints

Procedures for the preliminary design for composite adhesive joints are described. Typical joints, their respective free body diagrams, and approximate equations for estimating the stresses in each of these typical joints are summarized. Equations are also presented to check the critical conditions of the joint such as minimum length, maximum adhesive shear stress, and peel-off stress. To illustrate the procedure, sample designs are described in step-by-step fashion for a butt joint with single doubler subjected to static loads, cyclic loads, and environmental effects. The results show that unsymmetric adhesive joints are inefficient and should be avoided, and hygrothermal environments and cyclic loads dramatically reduce the structural integrity of the joint and require several joint lengths compared with those for static load with no environmental effects.

Chamis, C. C.↗

Lightweight Ablative and Ceramic Thermal Protection System Materials for NASA Exploration Systems Vehicles

As a collaborative effort among NASA Centers, the "Lightweight Nonmetallic Thermal Protection Materials Technology" Project was set up to assist mission/vehicle design trade studies, to support risk reduction in thermal protection system (TPS) material selections, to facilitate vehicle mass optimization, and to aid development of human-rated TPS qualification and certification plans. Missions performing aerocapture, aerobraking, or direct aeroentry rely on advanced heatshields that allow reductions in spacecraft mass by minimizing propellant requirements. Information will be presented on candidate materials for such reentry approaches and on screening tests conducted (material property and space environmental effects tests) to evaluate viable candidates. Seventeen materials, in three classes (ablatives, tiles, and ceramic matrix composites), were studied. In additional to physical, mechanical, and thermal property tests, high heat flux laser tests and simulated-reentry oxidation tests were performed. Space environmental effects testing, which included exposures to electrons, atomic oxygen, and hypervelocity impacts, was also conducted.

Valentine, Peter G.↗

VLA IMAGING OF VIRGO SPIRALS IN ATOMIC GAS (VIVA). I. THE ATLAS AND THE H I PROPERTIES

We present the results of a new VLA H I Imaging survey of Virgo galaxies, the VLA Imaging survey of Virgo galaxies in Atomic gas (VIVA). The survey includes high-resolution H I data of 53 carefully selected late type galaxies (48 spirals and five irregular systems). The goal is to study environmental effects on H I gas properties of cluster galaxies to understand which physical mechanisms affect galaxy evolution in different density regions, and to establish how far out the impact of the cluster reaches. As a dynamically young cluster, Virgo contains examples of galaxies experiencing a variety of environmental effects. Its nearness allows us to study each galaxy in great detail. We have selected Virgo galaxies with a range of star formation properties in low to high density regions (at projected distances from M87, d {sub 87} = 0.3-3.3 Mpc). Contrary to previous studies, more than half of the galaxies in the sample ({approx}60%) are fainter than 12 mag in B{sub T} . Overall, the selected galaxies represent the late type Virgo galaxies (S0/a to Sd/Irr) down to m{sub p} {approx}< 14.6 fairly well in morphological type, systemic velocity, subcluster membership, H I mass, and deficiency. The H I observations were done in C short (CS) configuration of the VLA radio telescope, with a typical spatial resolution of 15'' and a column density sensitivity of {approx}3-5 x 10{sup 19} cm{sup -2} in 3{sigma} per 10 km s{sup -1} channel. The survey was supplemented with data of comparable quality from the NRAO archive, taken in CS or C configuration. In this paper, we present H I channel maps, total intensity maps, velocity fields, velocity dispersions, global/radial profiles, position-velocity diagrams and overlays of H I/1.4 GHz continuum maps on the optical images. We also present H I properties such as total flux (S {sub HI}), H I mass (M {sub HI}), linewidths (W{sub 20} and W{sub 50}), velocity (V{sub HI}), deficiency (def{sub HI}), and size (D {sup eff}{sub HI} and D {sup iso}{sub HI}), and describe the H I morphology and kinematics of individual galaxies in detail. The survey has revealed details of H I features that were never seen before. In this paper, we briefly discuss differences in typical H I morphology for galaxies in regions of different galaxy densities. We confirm that galaxies near the cluster core (d {sub 87} {approx}< 0.5 Mpc) have H I disks that are smaller compared to their stellar disks (D{sub HI}/D{sub 25} < 0.5). Most of these galaxies in the core also show gas displaced from the disk, which is either currently being stripped or falling back after a stripping event. At intermediate distances (d{sub 87} {approx} 1 Mpc) from the center, we find a remarkable number of galaxies with long one-sided H I tails pointing away from M87. In a previous letter, we argue that these galaxies are recent arrivals, falling into the Virgo core for the first time. In the outskirts, we find many gas-rich galaxies, with gas disks extending far beyond their optical disks. Interestingly, we also find some galaxies with H I disks that are smaller compared to their stellar disks at large clustercentric distances.

79 ASTRONOMY AND ASTROPHYSICS↗

Divergent predictions of carbon storage between two global land models: Attribution of the causes through traceability analysis

Representations of the terrestrial carbon cycle in land models are becoming increasingly complex. It is crucial to develop approaches for critical assessment of the complex model properties in order to understand key factors contributing to models' performance. In this study, we applied a traceability analysis which decomposes carbon cycle models into traceable components, for two global land models (CABLE and CLM-CASA') to diagnose the causes of their differences in simulating ecosystem carbon storage capacity. Driven with similar forcing data, CLM-CASA' predicted –&thinsp;31&thinsp;% larger carbon storage capacity than CABLE. Since ecosystem carbon storage capacity is a product of net primary productivity (NPP) and ecosystem residence time ( τ E ), the predicted difference in the storage capacity between the two models results from differences in either NPP or τ E or both. Our analysis showed that CLM-CASA'simulated 37&thinsp;% higher NPP than CABLE. On the other hand, τ E , which was a function of the baseline carbon residence time ( τ ' E ) and environmental effect on carbon residence time, was on average 11 years longer in CABLE than CLM-CASA'. This difference in τ E was mainly caused by longer τ ' E of woody biomass (23 vs. 14 years in CLM-CASA'), and higher proportion of NPP allocated to woody biomass (23 vs. 16&thinsp;%). Differences in environmental effects on carbon residence times had smaller influences on differences in ecosystem carbon storage capacities compared to differences in NPP and τ ' E . Altogether, the traceability analysis showed that the major causes of different carbon storage estimations were found to be parameters setting related to carbon input and baseline carbon residence times between two models.

54 ENVIRONMENTAL SCIENCES↗

Electron Radiation Effects on Candidate Solar Sail Material

Solar sailing is a unique form of propulsion where a spacecraft gains momentum from incident photons. Solar sails are not limited by reaction mass and provide continual acceleration, reduced only by the lifetime of the lightweight film in the space environment and the distance to the Sun. Once thought to be difficult or impossible, solar sailing has come out of science fiction and into the realm of possibility. Any spacecraft using this propulsion method would need to deploy a thin sail that could be as large as many kilometers in extent. The availability of strong, ultra lightweight, and radiation resistant materials will determine the future of solar sailing. The National Aeronautics and Space Administration's (NASA) Marshall Space Flight Center (MSFC) is concentrating research into the utilization of ultra lightweight materials for spacecraft propulsion. The Space Environmental Effects Team at MSFC is actively characterizing candidate solar sail material to evaluate the thermo-optical and mechanical properties after exposure to space environmental effects. This paper will describe the irradiation of candidate solar sail materials to energetic electrons, in vacuum, to determine the hardness of several candidate sail materials.

Edwards, David L.↗

THE ROLE OF RAM PRESSURE STRIPPING IN THE QUENCHING OF CLUSTER STAR FORMATION

Recent observations of galaxy clusters have shown that environmental effects apparently associated with the cluster begin to lower the star formation rates of galaxies at distances as great as three times the cluster virial radius. These observations may indicate preprocessing of cluster galaxies in groups or in the cluster core for galaxies on highly elliptical orbits, but may also imply that the environmental effects due to the cluster are directly affecting galaxies on their first infall. To explore these issues, we investigate different models of ram pressure stripping (RPS) as it acts on satellite galaxies in clusters and compare to observations of the radial star formation gradient in clusters. We calculate the location of the accretion shock around model clusters and use this as the radius of onset of RPS in the GALFORM semi-analytic model of galaxy formation. Comparison of the results of our model and previously considered, simpler ram pressure models with recent observations indicates that current data are unable to strongly discriminate between models of RPS due to the complex interplay of preprocessing effects at work. However, future observations of a larger sample of clusters will likely be able to place stronger constraints on the process of RPS and its role in shaping radial trends in and around clusters.

79 ASTRONOMY AND ASTROPHYSICS↗

Effect of Environmental Enrichment on Singly- and Group-Housed Squirrel Monkeys

Nonhuman primates display an interest in novel places, habituate to new situations, and spend most of their daily activity in the wild in large groups engaging in feeding behaviors. Captivity changes these behaviors, and disrupts normal social hierarchies. In captivity, animals may exhibit stereotypical behaviors which are thought to indicate decreased psychological well-being (PWB). If an animal's behaviors can be made to approach those seen in the wild, and stereotypical behaviors are minimal it is assumed that PWB is adequate. Environmental enrichment (EE) devices have been used to address the Animal Welfare Act's requirement that the PWB of captive nonhuman primates be considered. The purpose of the present study was to examine whether various EE devices improve the PWB of captive squirrel monkeys. The present study used behavioral observation to quantify the effectiveness of several EE devices in reducing stereotypical behaviors in squirrel monkeys housed singly or in groups. Results showed that the EE devices used did not affect the expression of normal or stereotypical behaviors, but that the type of housing did.

Spring, Sarah E.↗

The effect of environmental plasma interactions on the performance of the solar sail system

Interaction between the solar sail and the natural plasma environment were examined for deleterious impacts upon the operation of the sail and its associated payload. Electrostatic charging of the sail in the solar wind and in near earth environment were examined. Deployment problems were studied. An analysis of electromechanical oscillations coupling the sail to the natural plasma was performed. As a result of these studies, it was concluded that none of these effects will have a significant negative impact upon the sail operation. The natural environment will be significantly perturbed and this will preclude measurements of electric and magnetic fields from an attached payload.

Douglas, M.↗

Summary of Expansions and Updates in R&D GREET® 2025

The research and development (R&D) version of Greenhouse gases, Regulated Emissions, and Energy use in Technologies (GREET®) model, or R&D GREET, is developed by Argonne National Laboratory (Argonne) with the support of the U.S. Department of Energy (DOE) and other federal agencies. R&D GREET is a life cycle analysis (LCA) model, structured to systematically examine the energy and environmental effects of a wide variety of transportation fuels and vehicle technologies in all transportation sub-sectors (i.e., road, air, marine, and rail) and other end-use sectors, and energy technology systems. Argonne has expanded and updated the model in many areas in R&D GREET 2025. This report provides a summary of the expansions and updates. R&D GREET is designed as an attributional LCA model, but specific consequential effects for certain pathways are included by default when they are scientifically important and/or highly policy relevant. For example, two major consequential elements – induced land use change (ILUC) for biofuels and avoided emissions for certain RNG-based pathways – are implemented by default in R&D GREET because they are highly relevant to our user base and crucial for a comprehensive evaluation of the environmental effects of these technologies. In a future version of R&D GREET, these consequential elements for biofuels and RNG could be more clearly distinguished from core attributional results. We will consider adding a highly visible toggle that would allow users to turn off or adjust these consequential impacts.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Evaluation of the Potential Environmental Impacts from Large-Scale Use and Production of Hydrogen in Energy and Transportation Applications

The purpose of this project is to systematically identify and examine possible near and long-term ecological and environmental effects from the production of hydrogen from various energy sources based on the DOE hydrogen production strategy and the use of that hydrogen in transportation applications. This project uses state-of-the-art numerical modeling tools of the environment and energy system emissions in combination with relevant new and prior measurements and other analyses to assess the understanding of the potential ecological and environmental impacts from hydrogen market penetration. H 2 technology options and market penetration scenarios will be evaluated using energy-technology-economics models as well as atmospheric trace gas projections based on the IPCC SRES scenarios including the decline in halocarbons due to the Montreal Protocol. Specifically we investigate the impact of hydrogen releases on the oxidative capacity of the atmosphere, the long-term stability of the ozone layer due to changes in hydrogen emissions, the impact of hydrogen emissions and resulting concentrations on climate, the impact on microbial ecosystems involved in hydrogen uptake, and criteria pollutants emitted from distributed and centralized hydrogen production pathways and their impacts on human health, air quality, ecosystems, and structures under different penetration scenarios

08 HYDROGEN↗