Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Energy transfer”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Anthracene Diphosphate Ligands for CdSe Quantum Dots; Molecular Design for Efficient Upconversion

Quantum dot (QD)-sensitized photon upconversion follows a multi-step energy transfer process from the QD to transmitter ligand to a soluble annihilator. Using a novel 10-R-anthracene-1,8-diphosphoric acid (R = octyl, 2- hexyldecyl, phenyl) ligand with high binding affinity for CdSe QD surfaces, we demonstrate a photon upconversion process that is limited by the transmitter to annihilator transfer efficiency. Using 1 H NMR spectroscopy, we demonstrate that these bidentate diphosphate ligands rapidly and irreversibly displace two carboxylate ligands. These ligands mediate energy transfer from the photoexcited QDs to a triplet annihilator (1,10-diphenylanthracene), producing overall photon upconversion quantum efficiencies as high as 17%, the highest for QDs with no shells. In conclusion, transient absorption spectroscopy shows that the anthracene dihydrogen phosphate (ADP) ligand supports a 3.4 fold longer triplet state lifetime compared to 9-anthracene carboxylic acid (299.9 ± 9.5 vs 88.2 ± 2.1 μs), increasing the probability of energy transfer.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Nonpigmented PsbR is involved in the integrity of excitation landscape in higher plant photosystem II, a case study in Arabidopsis thaliana and a mutant

PsbR is a nonpigmented 10 kDa protein in Photosystem II (PSII) in algae and plants. A recent structural study clarified its enigmatic structural location in a Photosystem II megacomplex that has baffled the community for more than four decades. Our current study interrogates whether absence of PsbR affects the overall dynamics of excitation energy migration within light harvesting complexes (LHC) and PSII super assemblies using highly-active PSII membrane particles, so-called BBY particles, isolated from a PsbR deletion mutant (ΔPsbR) of Arabidopsis thaliana. A femto-second (fs)-time-resolved transient absorption experimentation recorded at 77 K with selective excitation of Chl b which is exclusively present in LHCs enabled us to resolve the temporal differences in LHC→LHC and LHC→PSII excitation energy transfer steps. By applying specific target spectro-kinetic models to the transient absorption datasets, we demonstrated that the time constants of Chl a LHC → Chl a LHC excitation transfer significantly elongates in the ΔPsbR LHC-PSII particles, suggestive of the decreased aggregation level of photosynthetic proteins in the mutant. These findings highlight excitation energy transfer integrity in LHC-PSII assembly is not only determined by the pigmented light-harvesting complexes, but also synergistically by the nonpigmented PSII components. Furthermore, the disturbed integrity in dynamics of excitation energy transfer pathway within LHC-PSII supercomplex is discussed in the context of the altered LHC-PSII megacomplexes type I and II architectures which result from the absence of the PsbR protein in higher plant PSII.

Chlorophyll↗
NASA NTRS1976

Vibrational and rotational relaxation in mixtures of water vapor and oxygen

Experimental measurements of sound absorption in air, measurements of ultrasonic absorption in H2O/O2 mixtures at 500 K, and experimental measurements in mixtures of H2O with other impurities have been analyzed to determine the energy transfer rates in mixtures of O2 and H2O as a function of temperature. A set of energy transfer rate coefficients was found that give results consistent with all the experimental data examined and with vibrational energy transfer theory. The rotational relaxation time for H2O/O2 mixtures was determined from the 500 K ultrasonic measurements.

Bass, H. E.↗
DOE OSTI2020

Photochemical Upconversion in Water Using Cu(I) MLCT Excited States: Role of Energy Shuttling at the Micellar/Water Interface

Photochemical upconversion (UC) through triplet–triplet annihilation (TTA), which employs a visible absorbing triplet photosensitizer and an annihilator, is a process that generates a high energy photon from two lower energy photons. TTA-UC has been largely developed in pure organic solvents and solid-state polymeric constructs while featuring near exclusive use of rare and expensive metals within the photosensitizer. In this current investigation, we demonstrate that TTA-UC from the long lifetime earth-abundant photosensitizer [Cu(dsbtmp) 2 ](PF) 6 (dsbtmp = 2,9-di(sec-butyl)-3,4,7,8-tetramethyl-1,10-phenanthroline), abbreviated as Cu-PS, functions in water through encapsulation within a cationic-based assembly. Cetyltrimethylammonium bromide was the surfactant of choice as it electrostatically binds the negatively charged water-soluble 10-phenylanthracene-9-carboxylate (PAC) acceptor/annihilator and ultimately facilitates energy transfer across the interface. Efficient triplet–triplet energy transfer (TTET) from Cu-PS to the PAC acceptor was achieved in this aqueous assembly. Unfortunately, the hindered mobility of the PAC moieties ultimately hampered the annihilation process, and this was reflected in attenuated TTA rates and efficiencies. The combined experimental data illustrated that the water-soluble PAC acceptor was able to vectorially deliver the excited-state energy stored in Cu-PS across the interface into the bulk aqueous solution by engaging in excited-state electron transfer with methyl viologen acceptors. Lastly, these results are important for remotely operating photoredox reactions in water while rendering a photosensitizer spatially isolated in the hydrophobic core of a micelle.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Single-photon absorption and emission from a natural photosynthetic complex

Photosynthesis is generally assumed to be initiated by a single photon from the Sun, which, as a weak light source, delivers at most a few tens of photons per nanometre squared per second within a chlorophyll absorption band1. Yet much experimental and theoretical work over the past 40 years has explored the events during photosynthesis subsequent to absorption of light from intense, ultrashort laser pulses. Here, we use single photons to excite under ambient conditions the light-harvesting 2 (LH2) complex of the purple bacterium Rhodobacter sphaeroides, comprising B800 and B850 rings that contain 9 and 18 bacteriochlorophyll molecules, respectively. Excitation of the B800 ring leads to electronic energy transfer to the B850 ring in approximately 0.7 ps, followed by rapid B850-to-B850 energy transfer on an approximately 100-fs timescale and light emission at 850–875 nm. Using a heralded single photon source20,21 along with coincidence counting, we establish time correlation functions for B800 excitation and B850 fluorescence emission and demonstrate that both events involve single photons. We also find that the probability distribution of the number of heralds per detected fluorescence photon supports the view that a single photon can upon absorption drive the subsequent energy transfer and fluorescence emission and hence, by extension, the primary charge separation of photosynthesis. An analytical stochastic model and a Monte Carlo numerical model capture the data, further confirming that absorption of single photons is correlated with emission of single photons in a natural light-harvesting complex.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1984

Measurements of energy distribution in microwave plasmas of N2 and He and comparisons with results for H2

An electrothermal propulsion concept utilizing a microwave plasma system as the mechanism to convert electromagnetic energy into translational energy of the flowing gas is being investigated. Specifically, this study compares the energy transfer characteristics of three different gases, H2, N2, and He, to gain some insight as to the dominant energy transfer processes present in a microwave plasma. A calorimetric experimental system has been designed and built enclosing the microwave plasma system to accurately determine the net energy transferred to the flowing gas. Results are obtained for N2 and He discharges and compared with previously reported experimental results for H2.

Chapman, R.↗
DOE OSTI2024

Design and evaluation of a dilute flow particle-to-air heat exchanger for energy storage applications

The use of inert and redox-active particles for high-temperature energy storage requires the development of components that can efficiently transfer energy to high-pressure working fluids like supercritical carbon dioxide (sCO 2 ). Dilute flow reactors can enable high working fluid outlet temperatures and minimal parasitic losses compared to moving packed bed and fluidized bed reactors. This research uses both computational and experimental methods to explore the design trade-offs and practical challenges of a novel component for transferring energy from dilute flows of hot, reduced metal oxide (MO x ) particles to sCO 2 in tubes. A discretized thermal resistance network model, which accounts for particle hydrodynamics, multi-mode heat transfer, and reaction equilibrium, guides the design of a prototype device. This device is experimentally tested with a surrogate heat transfer fluids and inert particle temperatures up to 400°C and a heat duty exceeding 1 kW. The data are used to validate the thermal hydraulic sub-models, allowing for the simulation of reacting particle scenarios. Under nominal design conditions, the flow rate of reactive particles is predicted to be 30% lower than that of inert particles for the same energy recovered, with over 70% of the stored particle energy transferred to the sCO 2 . Furthermore, these findings can inform the design of more efficient energy recovery reactors for particle-based systems and can be integrated into system-level concentrated solar power models with thermal storage to optimize operating conditions.

14 SOLAR ENERGY↗
DOE OSTI2020

Data from Stereoconvergent Reduction of Activated Alkenes by a Nicotinamide Free Synergistic Photobiocatalytic System

There is a growing interest in developing cooperative chemoenzymatic reactions to harness the reactivity of chemical catalysts and the selectivity of enzymes for the synthesis of nonracemic chiral compounds. However, existing chemoenzymatic systems with more than one chemical reaction and one enzymatic reaction working cooperatively are rare. Moreover, the application of oxidoreductases in cooperative chemoenzymatic reactions is limited by the necessity of using expensive and unstable redox equivalents such as nicotinamide cofactors. Here, we report a light-driven cooperative chemoenzymatic system comprised of a photoinduced electron transfer reaction (PET) and a photosensitized energy transfer reaction (PEnT) with an enzymatic reduction in one-pot to synthesize chiral building blocks of bioactive compounds. As a proof of concept, ene-reductase was directly regenerated by PET in the absence of external cofactors. Meanwhile, enzymatic reduction worked cooperatively with photocatalyst-catalyzed energy transfer that continuously replenished the reactive isomer from the less reactive one. The whole system stereoconvergently reduced E/Z mixtures of alkenes to the enantiopure products. Additionally, enantioselective enzymatic reduction worked competitively with photocatalyst-catalyzed racemic background reaction and side reactions to channel the overall electron flow to the single enantiopure product. Such a light-driven cooperative chemoenzymatic system holds great potential for asymmetric synthesis using inexpensive petroleum or biomass-derived alkenes.

Catalysis↗
NASA NTRS1985

Multiple-scale turbulence closure modeling of confined recirculating flows

A multiple-scale turbulence closure scheme is developed for the numerical predictions of confined recirculating flows. This model is based on the multiple-time-scale concepts of Hanjalic et al. (1980) and takes into account the non-equilibrium spectra energy transfer mechanism. Problems concerning new formulation of energy transfer rate equations and subsequent model coefficient redefinition and energy spectrum partition are discussed. Comparisons are made with several experiments of internal recirculating flows for the purpose of model validation. Numerical results using the present model show significant improvement of predictive capability over that obtained with the single-scale k-epsilon model and show promising potential for complex turbulent flow predictions.

Chen, C. P.↗
DOE OSTI2022

Simultaneously Enhancing Exciton/Charge Transport in Organic Solar Cells by an Organoboron Additive

Efficient exciton diffusion and charge transport play a vital role in advancing the power conversion efficiency (PCE) of organic solar cells (OSCs). Here, a facile strategy is presented to simultaneously enhance exciton/charge transport of the widely studied PM6:Y6-based OSCs by employing highly emissive trans-bis(dimesitylboron)stilbene (BBS) as a solid additive. BBS transforms the emissive sites from a more H-type aggregate into a more J-type aggregate, which benefits the resonance energy transfer for PM6 exciton diffusion and energy transfer from PM6 to Y6. Transient gated photoluminescence spectroscopy measurements indicate that addition of BBS improves the exciton diffusion coefficient of PM6 and the dissociation of PM6 excitons in the PM6:Y6:BBS film. Transient absorption spectroscopy measurements confirm faster charge generation in PM6:Y6:BBS. Moreover, BBS helps improve Y6 crystallization, and current-sensing atomic force microscopy characterization reveals an improved charge-carrier diffusion length in PM6:Y6:BBS. Finally, owing to the enhanced exciton diffusion, exciton dissociation, charge generation, and charge transport, as well as reduced charge recombination and energy loss, a higher PCE of 17.6% with simultaneously improved open-circuit voltage, short-circuit current density, and fill factor is achieved for the PM6:Y6:BBS devices compared to the devices without BBS (16.2%).

14 SOLAR ENERGY↗
DOE OSTI2020

Size- and concentration-dependent Eu 2+ /Eu 3+ mixed luminescent characteristics of rare-earth-doped CaF 2 nanoparticles and their monolithic epoxy nanocomposites

CaF 2 is a promising luminescent host material for a wide range of applications, due to its high transparency, non-hygroscopy, low refractive index, low density, low backscattering efficiency, and abundance in nature. Here we report the photoluminescence (PL) and cathodoluminescence (CL) characteristics of rare-earth-doped CaF 2 nanoparticles and their composite monoliths with epoxy with visible emissions. The CaF 2 nanoparticles of ca. 36, 108 and 305 nm were prepared by a facile solution-mixing process and subsequent hydrothermal treatment. As the particle size decreases, the luminescence intensity increases for single-doped particles, while oppositely decreases for codoped particles because of energy transfer. Further, Eu 2+ - and Tb 3+ -codoped CaF 2 nanoparticles exhibit red emission, providing an efficient path for red emission through an energy transfer by Tb 3+ bridging without direct Eu 3+ doping. The effects of size and concentration are found to be pronounced in CL than PL, as the charge transfer between Eu 2+ and Eu 3+ reduces the concentration quenching in CL. The luminescence emission characteristics of epoxy/CaF 2 monoliths are different from those of particles due to the interactions with the epoxy molecules, and thus the energy transfer is hindered in PL while not in CL, enabling them for high-energy irradiation applications.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Effect of a guide field on the turbulence like properties of magnetic reconnection

The effect of an external guide field on the turbulence-like properties of magnetic reconnection is studied using five different 2.5D kinetic particle-in-cell (PIC) simulations. The magnetic energy spectrum is found to exhibit a slope of approximately −5/3 in the inertial range, independent of the guide field. On the contrary, the electric field spectrum in the inertial range steepens more with the guide field and approaches a slope of −5/3. In addition, spectral analysis of the different terms of the generalized Ohm's law is performed and found to be consistent with PIC simulations of turbulence and MMS observations. Finally, the guide field effect on the energy transfer behavior is examined using the von Kármán–Howarth (vKH) equation based on incompressible Hall-MHD. The general characteristics of the vKH equation with constant rate of energy transfer in the inertial range are consistent in all the simulations. This suggests that the qualitative behavior of energy spectrum and energy transfer in reconnection are similar to that of turbulence, indicating that reconnection fundamentally involves an energy cascade.

Physics↗
DOE OSTI2023

Nanoscale imaging of quantum dot dimers using time-resolved super-resolution microscopy combined with scanning electron microscopy

Abstract Time-resolved super-resolution microscopy was used in conjunction with scanning electron microscopy to image individual colloidal CdSe/CdS semiconductor quantum dots (QD) and QD dimers. The photoluminescence (PL) lifetimes, intensities, and structural parameters were acquired with nanometer scale spatial resolution and sub-nanosecond time resolution. The combination of these two techniques was more powerful than either alone, enabling us to resolve the PL properties of individual QDs within QD dimers as they blinked on and off, measure interparticle distances, and identify QDs that may be participating in energy transfer. The localization precision of our optical imaging technique was ∼3 nm, low enough that the emission from individual QDs within the dimers could be spatially resolved. While the majority of QDs within dimers acted as independent emitters, at least one pair of QDs in our study exhibited lifetime and intensity behaviors consistent with resonance energy transfer from a shorter lifetime and lower intensity donor QD to a longer lifetime and higher intensity acceptor QD. For this case, we demonstrate how the combined super-resolution optical imaging and scanning electron microscopy data can be used to characterize the energy transfer rate.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Electrically controlling and optically observing the membrane potential of supported lipid bilayers

Supported lipid bilayers are a well-developed model system for the study of membranes and their associated proteins, such as membrane channels, enzymes, and receptors. These versatile model membranes can be made from various components, ranging from simple synthetic phospholipids to complex mixtures of constituents, mimicking the cell membrane with its relevant physiochemical and molecular phenomena. In addition, the high stability of supported lipid bilayers allows for their study via a wide array of experimental probes. In this work, we describe a platform for supported lipid bilayers that is accessible both electrically and optically, and demonstrate direct optical observation of the transmembrane potential of supported lipid bilayers. We show that the polarization of the supported membrane can be electrically controlled and optically probed using voltage-sensitive dyes. Membrane polarization dynamics is understood through electrochemical impedance spectroscopy and the analysis of an equivalent electrical circuit model. In addition, we describe the effect of the conducting electrode layer on the fluorescence of the optical probe through metal-induced energy transfer, and show that while this energy transfer has an adverse effect on the voltage sensitivity of the fluorescent probe, its strong distance dependency allows for axial localization of fluorescent emitters with ultrahigh accuracy. We conclude with a discussion on possible applications of this platform for the study of voltage-dependent membrane proteins and other processes in membrane biology and surface science.

59 BASIC BIOLOGICAL SCIENCES↗
NASA NTRS1984

The application of dimensional analysis to the problem of solar wind-magnetosphere energy coupling

The constraints imposed by dimensional analysis are used to find how the solar wind-magnetosphere energy transfer rate depends upon interplanetary parameters. The analyses assume that only magnetohydrodynamic processes are important in controlling the rate of energy transfer. The study utilizes ISEE-3 solar wind observations, the AE index, and UT from three 10-day intervals during the International Magnetospheric Study. Simple linear regression and histogram techniques are used to find the value of the magnetohydrodynamic coupling exponent, alpha, which is consistent with observations of magnetospheric response. Once alpha is estimated, the form of the solar wind energy transfer rate is obtained by substitution into an equation of the interplanetary variables whose exponents depend upon alpha.

Bargatze, L. F.↗
NASA NTRS1996

Dose equivalent near the bone-soft tissue interface from nuclear fragments produced by high-energy protons

During manned space missions, high-energy nucleons of cosmic and solar origin collide with atomic nuclei of the human body and produce a broad linear energy transfer spectrum of secondary particles, called target fragments. These nuclear fragments are often more biologically harmful than the direct ionization of the incident nucleon. That these secondary particles increase tissue absorbed dose in regions adjacent to the bone-soft tissue interface was demonstrated in a previous publication. To assess radiological risks to tissue near the bone-soft tissue interface, a computer transport model for nuclear fragments produced by high energy nucleons was used in this study to calculate integral linear energy transfer spectra and dose equivalents resulting from nuclear collisions of 1-GeV protons transversing bone and red bone marrow. In terms of dose equivalent averaged over trabecular bone marrow, target fragments emitted from interactions in both tissues are predicted to be at least as important as the direct ionization of the primary protons-twice as important, if recently recommended radiation weighting factors and "worst-case" geometry are used. The use of conventional dosimetry (absorbed dose weighted by aa linear energy transfer-dependent quality factor) as an appropriate framework for predicting risk from low fluences of high-linear energy transfer target fragments is discussed.

NASA Discipline Number 45-10↗
DOE OSTI2022

N 2 vibrational excitation in atmospheric pressure ns pulse and RF plasma jets

Time-resolved N 2 vibrational temperature and translational–rotational temperature in quasi-two-dimensional atmospheric pressure plasma jets sustained by ns pulse and RF discharges in nitrogen/noble gas mixtures are measured by the broadband vibrational Coherent Anti-Stokes Raman Scattering (CARS) . The results indicate a much stronger vibrational excitation in the RF plasma jet, due to the lower reduced electric field and higher discharge power. In a ns pulse discharge in N 2 /He, N 2 vibrational temperature is significantly lower compared to that in N 2 /Ar, due to the more rapid vibration–translation (V–T) relaxation of nitrogen by helium atoms. In the RF plasma jets in N 2 /Ne and N 2 /Ar, the vibrational excitation increases considerably as the nitrogen fraction in the mixture is reduced. The experimental data in the RF plasma jet in N 2 /Ar jet are compared with the kinetic modeling predictions. The results indicate that nitrogen vibrational excitation in N 2 /Ar plasma jets with a small N 2 fraction in the mixture (several percent) is controlled primarily by electron impact, anharmonic vibration–vibration (V–V) pumping, and V–T relaxation by N atoms. In comparison, V–V energy transfer from the vibrationally excited molecules in the first excited electronic state, N 2 (A 3 Σ u + , v), which are generated primarily by the energy transfer from the metastable Ar atoms, has a minor effect on the vibrational populations of the ground electronic state, N 2 (X 1 Σ g + , v). Although the discharge energy fraction going to electronic excitation is significant, the predicted quasi-steady-state N 2 (A 3 Σ u + ) number density, controlled by the energy pooling and quenching by N atoms, remains relatively low. Because of this, the net rate of N 2 (X 1 Σ g + ) vibrational excitation by the V–V energy transfer from N 2 (A 3 Σ u + ) is much lower compared to that by the direct electron impact. Furthermore, the results show that atmospheric pressure RF plasma jets can be used as sources of highly vibrationally excited N 2 molecules and N atoms.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Generation of meter-scale hydrogen plasmas and efficient, pump-depletion-limited wakefield excitation using 10 GeV electron bunches

High repetition rates and efficient energy transfer to the accelerating beam are important for a future linear collider based on the beam-driven plasma wakefield acceleration scheme (PWFA-LC). This paper reports the first results from the Plasma Wakefield Acceleration Collaboration (E300) that are beginning to address both of these issues using the recently commissioned FACET-II facility at SLAC national accelerator laboratory. Here we have generated meter-scale hydrogen plasmas using time-structured 10 GeV electron bunches from FACET-II, which hold the promise of dramatically increasing the repetition rate of PWFA by rapidly replenishing the gas between each shot compared to the hitherto used lithium plasmas that operate at 1–10 Hz. Furthermore, we have excited wakes in such plasmas that are suitable for high gradient particle acceleration with high drive-bunch to wake energy transfer efficiency- a first step in achieving a high overall energy transfer efficiency. We have done this by using time-structured electron drive bunches that typically have one or more ultra-high current (> 30 kA) femtosecond spike(s) superimposed on a longer (~0.4 ps) lower current (< 10 kA) bunch structure. The first spike effectively field-ionizes the gas and produces a meter-scale (30–160 cm) plasma, whereas the subsequent beam charge creates a wake. The length and amplitude of the wake depends on the longitudinal current profile of the bunch and plasma density. We find that the onset of pump depletion, when some of the drive beam electrons are nearly fully depleted of their energy, occurs for hydrogen pressure ≥ 1.5Torr. We also show that some electrons in the rear of the bunch can gain several GeV energies from the wake. These results are reproduced by particle-in-cell simulations using the QPAD code. At a pressure of ~2Torr, simulation results and experimental data show that the beam transfers about 60% of its energy to the wake.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗