Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Electron diffraction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29

Micro-emulsion-assisted synthesis of ZnS nanospheres and their photocatalytic activity

ZnS nanospheres with rough surface were synthesized by using a micro-emulsion-assisted solvothemal process. The molar ratio of [water]/[surfactant] played an important role in controlling the size of the ZnS nanospheres. X-ray powder diffraction (XRD), transmission electron microscopy (TEM), field emission-scanning electron microscope (FE-SEM), and selected area electron diffraction (SAED) were used for the characterization of the resulting ZnS nanospheres. A possible formation mechanism was proposed. These ZnS nanospheres exhibited a good photocatalytic activity for degradation of an aqueous p-nitrophenol solution and the total organic carbon (TOC) of the degradation product has also been investigated.

36 MATERIALS SCIENCE↗

Electron Backscatter Diffraction of CdTe Thin Films: Effects of CdCl2 Treatment

In this work, the authors describe procedures to prepare the surface of close-spaced sublimation CdTe thin films necessary for producing good electron backscatter diffraction (EBSD) data. They found that polishing resulted in an amorphous layer on the surface and no Kikuchi pattern; however, ion-beam milling produced a relatively flat and good-quality surface, resulting in high-quality patterns and, consequently, excellent EBSD data. The authors used a combination of polishing and ion-beam milling or etching to study the crystalline structure of the CdTe film at different depths. They also used EBSD, in conjunction with other analytical techniques, to investigate the effects of the CdCl{sub 2} treatment, performed at different temperatures and times, on the recrystallization process of physical vapor deposition CdTe thin films. The authors found that the untreated films were <111> oriented, with grain sizes smaller than 1 {micro}m. The CdCl{sub 2} at 350 C produced partially recrystallized films, whereas treatments at 400 C or 420 C produced completely recrystallized films, with no texture, and grains with grain sizes varying from about 1 {micro}m to more than 40{micro}m. These films were so flat that good EBSD data could be obtained without any surface preparation. Atomic force microscopy and scanning electron microscopy showed that large grains had different morphologies than smaller grains, and EBSD showed that these large grains had <111> texture. These results indicate that the (111) surface is the lowest energy surface in these films and, consequently, <111>-oriented grains grow at the expense of grains oriented in less-favorable directions. Regardless of the deposition method and treatment, the CdTe films have a high density of 60{sup o} <111> twin boundaries.

14 SOLAR ENERGY↗

A facile synthesis of novel nanorod-assembling hollow nanowires of cadmium sulfide/DBTU nanocomposite

Novel nanorod-assembling hollow nanowires of cadmium sulfide/DBTU (N,N'-dibutylthiourea) nanocomposite were synthesized by reacting CdCl{sub 2} with in situ produced H{sub 2}S from reaction of butylamine and carbon disulfide at molar ratio 3:3 of CS{sub 2}:BuNH{sub 2} at 50 {sup o}C. This product was characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), selected area electron diffraction (SEAD), energy dispersive X-ray spectroscopy (EDAX), thermogravimetric (TG), Fourier transform infrared (FTIR) and UV-vis absorption spectra. A plausible mechanism that the extending DBTU molecules in solvent of CS{sub 2} induce the formation of CdS/DBTU nanorods by coordinating with the formed CdS particles, and construct these nanorods to hollow nanowires via molecular interactions is proposed and discussed on the basis of experimental results. Photoluminescence (PL) of CdS/DBTU nanocomposite exhibits increasing emission intensity largely.

36 MATERIALS SCIENCE↗

Electron backscatter diffraction study of deformation and recrystallization textures of individual phases in a cross-rolled duplex steel

The evolution of microstructure and texture during cross-rolling and annealing was investigated by electron backscatter diffraction in a ferritic–austenitic duplex stainless steel. For this purpose an alloy with nearly equal volume fraction of the two phases was deformed by multi-pass cross-rolling process up to 90% reduction in thickness. The rolling and transverse directions were mutually interchanged in each pass by rotating the sample by 90° around the normal direction. In order to avoid deformation induced phase transformation and dynamic strain aging, the rolling was carried out at an optimized temperature of 898 K (625 °C) at the warm-deformation range. The microstructure after cross warm-rolling revealed a lamellar structure with alternate arrangement of the bands of two phases. Strong brass and rotated brass components were observed in austenite in the steel after processing by cross warm-rolling. The ferrite in the cross warm-rolling processed steel showed remarkably strong RD-fiber (RD//< 011 >) component (001)< 011 >. The development of texture in the two phases after processing by cross warm-rolling could be explained by the stability of the texture components. During isothermal annealing of the 90% cross warm-rolling processed material the lamellar morphology was retained before collapse of the lamellar structure to the mutual interpenetration of the phase bands. Ferrite showed recovery resulting in annealing texture similar to the deformation texture. In contrast, the austenite showed primary recrystallization without preferential orientation selection leading to the retention of deformation texture. The evolution of deformation and annealing texture in the two phases of the steel was independent of one another. - Highlights: • Effect of cross warm-rolling on texture formation is studied in duplex steel. • Brass texture in austenite and (001)<110 > in ferrite are developed. • Ferrite shows recovery during annealing retaining the (001)<110 > component. • Austenite shows recrystallization during annealing retaining the deformation texture. • The deformation of recrystallization of two phases is independent of one other.

36 MATERIALS SCIENCE↗

Plasma synthesized boron nano-sized powder: The effect of processing conditions on the crystallographic and microstructural properties

Boron nano-sized powders (doped and undoped) were synthesized by the reaction of boron trichloride, BCl{sub 3}, and hydrogen, H{sub 2}, in a plasma. The gases were mixed and injected into an argon RF plasma where they combined and formed boron powder via gas phase nucleation. Methane gas, CH{sub 4}, was added in the case of carbon-doped powder. These powders were found to be suitable for the fabrication of high performance superconducting magnesium diboride (MgB{sub 2}) wires. Plasma synthesized boron particles typically had the shape of low aspect ratio spheroids that tended to form open, lacy agglomerates. Particle sizes ranged from 10 to 250 nm. A typical batch of boron powder contained a mixture of amorphous and crystalline material. In this study, the effects of plasma power and carbon dopant addition on the crystallinity, particle size, and microstructure of boron nanopowder were investigated using powder x-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and selected area electron diffraction (SAD). Particle size distribution was measured using SEM and TEM images. SAD patterns showed the characteristic halo of an amorphous material, but single crystal reflections were observed as well. Wires made from these powders attained 60,000 A/cm{sup 2} at 5 K and 5 Tesla and attained 25,000 A/cm{sup 2} at 20 K and 3 Tesla.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Study of the structural features of ε-Co nanoparticles synthesized by cobalt carbonyl decomposition in the presence of surfactant

Cobalt nanoparticles (3–7 nm in size) obtained by cobalt carbonyl decomposition in 1,2-dichlorobenzene in the presence of surfactants (trioctylphosphine oxide and oleic acid) have been studied by a complex of structural methods: small-angle X-ray scattering, electron diffraction, and transmission electron microscopy. The nanoparticles synthesized are found to consist of the cubic ε-Со phase; their crystal structure is described within the sp. gr. P4{sub 1}32, a = 6.097 Å. Using small-angle X-ray scattering, the size and shape of nanoparticles have been determined directly in the liquid dispersion. Most of the particles have a spherical shape; their average size is ≈3.5 ± 0.5 nm, which agrees with the electron microscopy data. Possible factors causing the ε-phase formation during synthesis of metallic Co nanoparticles are discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ultrathin epitaxially grown bismuth (111) membranes

An ex situ cleaning and etching technique was applied to NaCl single crystals to prepare atomically flat and clean NaCl surfaces. These were used as substrates for molecular beam epitaxial growth of ultrathin continuous Bi(111) films. The high film quality - as studied with low energy electron diffraction, atomic force microscopy, and transmission electron diffraction - is attributed to the commensurate 10:7 ratio of the lattice constants. Dissolving the NaCl substrates in water allows the fabrication of freestanding 20 nm thin Bi(111) membranes of centimeter size.

36 MATERIALS SCIENCE↗

Synthesis and characterization of low softening point high Bi{sub 2}O{sub 3} glasses in the K{sub 2}O-B{sub 2}O{sub 3}-Bi{sub 2}O{sub 3} system

Synthesis of a new series of lead free low softening point (< 470 deg. C) high Bi{sub 2}O{sub 3} (40-90 mol%) glasses in the K{sub 2}O-B{sub 2}O{sub 3}-Bi{sub 2}O{sub 3} system by the melt-quench technique has been demonstrated here. Their structural, optical, thermal, electrical and other physical properties have been evaluated by X-ray diffraction (XRD), transmission electron microscopy (TEM), field emission scanning electron microscopy (FESEM), FT-infrared reflection (FTIRR) spectroscopy, UV-Visible spectroscopy, dilatometer, LCR meter, etc. techniques. The glass softening point, glass transition temperature and glass deformation temperature are found to vary in the ranges 410-465 deg. C, 354-409 deg. C and 376-427 deg. C respectively which are found to correlate well with the boron anomaly phenomenon (as revealed by FTIRRS) with gradual addition of Bi{sub 2}O{sub 3} in the glass matrix. The coefficient of thermal expansion shows a decreasing trend from 153 down to 109 x 10{sup -7} K{sup -1} whereas the dielectric constant increases from 21 to 34 with the increase in Bi{sub 2}O{sub 3} content. The theoretical optical basicity is found to increase from 0.93 to 1.15 while the optical band gap decreases from 2.86 down to 2.30 eV with the addition of Bi{sub 2}O{sub 3}. The formation of metallic bismuth in these glasses during melting in air has been confirmed by the XRD, TEM, selected area electron diffraction (SAED) and high resolution TEM (HRTEM) analyses. The formation of a Bi{sub 2}O{sub 3} rich secondary phase in the glasses and their particle size distribution have been examined by the FESEM photomicrograph analysis. - Research Highlights: {yields} Synthesis of low softening point (< 470 deg. C) high Bi{sub 2}O{sub 3} content (40-90 mol%) glasses. {yields} Study of boron anomaly phenomenon with gradual addition of Bi{sub 2}O{sub 3} in the glass. {yields} Co-efficient of thermal expansion decreases from 153 to 109 x 10{sup -7} K{sup -1}. {yields} Dielectric constant increases from 21 to 34 with increase in Bi{sub 2}O{sub 3} content. {yields} Formation of metallic bismuth in the glass confirmed by the XRD and TEM analyses.

36 MATERIALS SCIENCE↗

Hydrothermal synthesis of highly crystalline RuS{sub 2} nanoparticles as cathodic catalysts in the methanol fuel cell and hydrochloric acid electrolysis

Highlights: • Highly crystalline RuS{sub 2} nanoparticles have been first synthesized by a “one-step” hydrothermal method. • The product presents a pure cubic phase of stoichiometric ratio RuS{sub 2} with average particle size of 14.8 nm. • RuS{sub 2} nanoparticles were used as cathodic catalysts in methanol fuel cell and hydrochloric acid electrolysis. • The catalyst outperforms commercial Pt/C in methanol tolerance and stability towards Cl{sup −}. - Abstract: Highly crystalline ruthenium sulfide (RuS{sub 2}) nanoparticles have been first synthesized by a “one-step” hydrothermal method at 400 °C, using ruthenium chloride and thiourea as reactants. The products were characterized by powder X-ray diffraction (XRD), scanning electron microscopy/energy disperse spectroscopy (SEM/EDS), thermo gravimetric-differential thermal analyze (TG-DTA), transmission electron microscopy equipped with selected area electron diffraction (TEM/SAED). Fourier transform infrared spectra (IR), and X-ray photoelectron spectroscopy (XPS). XRD result illustrates that the highly crystalline product presents a pure cubic phase of stoichiometric ratio RuS{sub 2} and the average particle size is 14.8 nm. SEM and TEM images display the products have irregular shape of 6–25 nm. XPS analyst indicates that the sulfur exists in the form of S{sub 2}{sup 2−}. Cyclic voltammetry (CV), rotating disk electrode (RDE), chronoamperometry (CA) and electrochemical impedance spectroscopy (EIS) measurements are conducted to evaluate the electrocatalytic activity and stability of the highly crystalline RuS{sub 2} nanoparticles in oxygen reduction reaction (ORR) for methanol fuel cell and hydrochloric acid electrolysis. The results illustrate that RuS{sub 2} is active towards oxygen reduction reaction. Although the activity of RuS{sub 2} is lower than that of Pt/C, the RuS{sub 2} catalyst outperforms commercial Pt/C in methanol tolerance and stability towards Cl{sup −}.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Preparation of graphene–Ag composites and their application for electrochemical detection of chloride

Highlights: ► Graphene–Ag composites were prepared in situ using ascorbic acid as green reducing agent. ► The morphology of Ag particles was irregular sheet and Ag particles homogeneously distributed on the graphene matrix. ► The surface-enhanced Raman scattering enhancement factor of D band is 5.85 for composites. ► The composites exhibited good sensitivity for the detection of chloride ions. -- Abstract: Graphene–Ag composites were prepared in situ using ascorbic acid as green reducing agent. The composites were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), selected-area electronic diffraction (SAED), and Raman spectrometer. It was showed that Ag particles homogeneously distributed on the graphene matrix. The morphology of Ag particles was irregular sheet with (1 1 1) basal plane. The surface-enhanced Raman scattering (SERS) enhancement factor of D band is 5.85 for composites. The application of the composites for electrochemical detection of chloride was studied by cyclic voltammetry. The composites exhibited good sensitivity for the detection of chloride ions. The maximum peak current of cyclic voltammetry curve in 5 mM KCl was 0.80 mA. In the range of 500 μM to 50 mM for Cl{sup −}, the current response was proportional and linear to the Cl{sup −} concentration. The sensitivity to the detection for Cl{sup −} was 0.059 (mA/mM) and the detection limit was 61 μM for Cl{sup −}. It indicates graphene–Ag composites would be a competitive material for detection of halide.

36 MATERIALS SCIENCE↗

Spectral identification scheme for epitaxially grown single-phase niobium dioxide

This publication describes how to distinguish under-oxidized and over-oxidized phases of the metal-insulator transition material NbO{sub 2} by employing a combination of the Nb 3d and O 1s core-level and valence-band spectra. Niobium oxides (NbO{sub x}) are grown under various conditions by molecular beam epitaxy on several different substrates, mostly (111)-oriented strontium titanate (SrTiO{sub 3}), in order to obtain phase-pure NbO{sub 2}. The films are characterized by in situ reflection high-energy electron diffraction, X-ray diffraction, and transmission electron microscopy to determine crystallinity, lattice constants, and epitaxial relationships. Niobium metal oxidation states and film stoichiometry are determined with in situ X-ray photoelectron spectroscopy. Asymmetric Nb 3d core-level spectral components are observed in phase-pure NbO{sub 2}, with a binding energy for Nb 3d{sub 5/2} of 206 eV. The effect of substrate type, growth temperature, and oxygen pressure on the film composition is also described.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Controlled synthesis of Mn{sub 3}O{sub 4} and MnCO{sub 3} in a solvothermal system

Controlled synthesis of Mn{sub 3}O{sub 4} nanocrystals and MnCO{sub 3} aggregates was achieved by a facile solvothermal method using different divalent manganese source in the solvent of N,N-dimethylformamide (DMF) with/without the introduction of poly(vinylpyrrolidone) (PVP). PVP was used as a co-reducing reagent in the controlled formation of MnCO{sub 3} crystal. The products were characterized by X-ray powder diffraction (XRD), transmission electron microscopy (TEM) and selected-area electron diffraction (SAED), Fourier transform infrared (FTIR) spectra, Raman spectrum and magnetic measurement. Higher process temperature and longer solvothermal time were favorable for the formation of MnCO{sub 3} single phase using MnCl{sub 2} as the manganese source. Mn{sub 3}O{sub 4} nanocrystals were prepared at a relatively lower temperature. MnCO{sub 3} aggregates consisted by small nanoparticles have a certain orientation, showing that the nanocrystals formed earlier through oriented aggregation. The size of Mn{sub 3}O{sub 4} nanocrystals was 22.5 {+-} 7.3 nm and 7.3 {+-} 1.4 nm prepared using MnCl{sub 2} and Mn(CH{sub 3}COO){sub 2}, respectively, at 160 deg. C for 24 h. Raman spectra showed size-dependent characteristics. Smaller Mn{sub 3}O{sub 4} nanoparticle resulted in a red-shift in Raman spectra. Magnetic property of the prepared Mn{sub 3}O{sub 4} nanoparticle was influenced by the size distribution and crystallinity.

36 MATERIALS SCIENCE↗

Preparation of meta-stable phases of barium titanate by Sol-hydrothermal method

Two low-cost chemical methods of sol–gel and the hydrothermal process have been strategically combined to fabricate barium titanate (BaTiO{sub 3}) nanopowders. This method was tested for various synthesis temperatures (100 °C to 250 °C) employing barium dichloride (BaCl{sub 2}) and titanium tetrachloride (TiCl{sub 4}) as precursors and sodium hydroxide (NaOH) as mineralizer for synthesis of BaTiO{sub 3} nanopowders. The as-prepared BaTiO{sub 3} powders were investigated for structural characteristics using x-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The overall analysis indicates that the hydrothermal conditions create a gentle environment to promote the formation of crystalline phase directly from amorphous phase at the very low processing temperatures investigated. XRD analysis showed phase transitions from cubic - tetragonal - orthorhombic - rhombohedral with increasing synthesis temperature and calculated grain sizes were 34 – 38 nm (using the Scherrer formula). SEM and TEM analysis verified that the BaTiO{sub 3} nanopowders synthesized by this method were spherical in shape and about 114 - 170 nm in size. The particle distribution in both SEM and TEM shows that as the reaction temperature increases from 100 °C to 250 °C, the particles agglomerate. Selective area electron diffraction (SAED) shows that the particles are crystalline in nature. The study shows that choosing suitable precursor and optimizing pressure and temperature; different meta-stable (ferroelectric) phases of undoped BaTiO{sub 3} nanopowders can be stabilized by the sol-hydrothermal method.

36 MATERIALS SCIENCE↗

Facile sonochemical synthesis and photoluminescent properties of lanthanide orthophosphate nanoparticles

Uniform lanthanide orthophosphate LnPO{sub 4} (Ln=La, Ce, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho) nanoparticles have been systematically synthesized via a facile, fast, efficient ultrasonic irradiation of inorganic salt aqueous solution under ambient conditions without any surfactant or template. X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), selected area electron diffraction (SAED), photoluminescence (PL) spectra as well as kinetic decays were employed to characterize the samples. The SEM and the TEM images show that the hexagonal structured lanthanide orthophosphate LnPO{sub 4} (Ln=La, Ce, Pr, Nd, Sm, Eu, Gd) products have nanorod bundles morphology, while the tetragonal LnPO{sub 4} (Ln=Tb, Dy, Ho) samples prepared under the same experimental conditions are composed of nanoparticles. HRTEM micrographs and SAED results prove that these nanostructures are polycrystalline in nature. The possible formation mechanism for LnPO{sub 4} (Ln=La-Gd) nanorod bundles is proposed. Eu{sup 3+}-doped LaPO{sub 4} and Tb{sup 3+}-doped CePO{sub 4} samples were also prepared by using the same synthetic process, which exhibit an orange-red (Eu{sup 3+}:{sup 5}D{sub 0}-{sup 7}F{sub 1,2,3,4}) and green (Tb{sup 3+}, {sup 5}D{sub 4}-{sup 7}F{sub 3,4,5,6}) emission, respectively. - Graphical Abstract: Hexagonal LnPO{sub 4} (Ln=La, Ce, Pr, Nd, Sm, Eu, Gd) and tetragonal LnPO{sub 4} (Ln=Tb, Dy, Ho) nanoparticles have been synthesized by a simple and facile sonochemical method.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ni{sub 0.5}Zn{sub 0.5}Fe{sub 2}O{sub 4} nanoparticles dispersed in a SiO{sub 2} matrix synthesized by sol-gel processing

(Ni{sub 0.5}Zn{sub 0.5}Fe{sub 2}O{sub 4})x/(SiO{sub 2})(100 - x) (x = 5, 20 and 50 wt.%) nanocomposites are synthesized by a sol-gel method using tetraethylorthosilicate (TEOS) and metallic nitrates as precursors, and by further annealing the powders for 1 h at 1273 K. X-ray diffraction (XRD), transmission electron microscopy (TEM), room temperature vibrating sample magnetometry (VSM) and SQUID measurements are employed for structural, morphological and magnetic sample characterization. For all the concentrations analyzed, the powder nanocomposites actually consist of spinel NiZn ferrite nanoparticles, dispersed in an amorphous silica matrix. TEM studies reveal different particle size distributions and particle morphologies for the three ferrite contents. The 20 wt.%-NiZn ferrite samples consist of nearly spherical nanoparticles, of about 8 nm, mainly superparamagnetic, well-dispersed in the amorphous silica matrix, while the 5 wt.%-NiZn ferrite samples exhibit a bimodal particle size distribution (5 and 30 nm) of single-domain nanoparticles embedded in the silica. In the 50 wt.%-NiZn ferrite samples, two particle families are observed: small round superparamagnetic nanoparticles of about 8 nm embedded in the amorphous silica matrix and large, non-spherical, ferrimagnetic ones, forming agglomerates outside the matrix. In all the synthesized samples, thickness fringes are observed inside some of the ferrite nanoparticles in dark field images. This contrast is explained using the theory of electron diffraction in a weak beam dark field (WBDF) condition and considering spherical ferrite nanoparticles. A large range of tailored magnetic properties varying the fraction, dispersion and mean size of the ferrimagnetic NiZn ferrite particles is obtained. Room temperature saturation magnetization values are found in the range 3.0-30.4 Am{sup 2}/kg for the different concentration samples. Coercivity values, between 1.9 and 7.6 mT, are more than 50% higher than those measured in powders of pure stoichiometric NiZn ferrite nanoparticles and somewhat higher than those reported for similar NiZn ferrite/SiO{sub 2} nanocomposites also synthesized by sol-gel processes. A correlation between the nanocomposite microstructure and the observed magnetic properties is established. - Highlights: Black-Right-Pointing-Pointer NiZn ferrite/SiO{sub 2} nanocomposites are successfully synthesized by a sol-gel route. Black-Right-Pointing-Pointer Depending on the NiZn ferrite content single or bimodal size distributions result. Black-Right-Pointing-Pointer Coercivity (1.9-7.6 mT) is 50% higher than in stoichiometric NiZn ferrite powders. Black-Right-Pointing-Pointer Microstructure and magnetic properties are correlated.

36 MATERIALS SCIENCE↗

Strain relaxation in single crystal SrTiO{sub 3} grown on Si (001) by molecular beam epitaxy

An epitaxial layer of SrTiO{sub 3} grown directly on Si may be used as a pseudo-substrate for the integration of perovskite oxides onto silicon. When SrTiO{sub 3} is initially grown on Si (001), it is nominally compressively strained. However, by subsequent annealing in oxygen at elevated temperature, an SiO{sub x} interlayer can be formed which alters the strain state of SrTiO{sub 3}. We report a study of strain relaxation in SrTiO{sub 3} films grown on Si by molecular beam epitaxy as a function of annealing time and oxygen partial pressure. Using a combination of x-ray diffraction, reflection high energy electron diffraction, and transmission electron microscopy, we describe the process of interfacial oxidation and strain relaxation of SrTiO{sub 3} on Si (001). Understanding the process of strain relaxation of SrTiO{sub 3} on silicon will be useful for controlling the SrTiO{sub 3} lattice constant for lattice matching with functional oxide overlayers.

36 MATERIALS SCIENCE↗

Optical Properties of Ga{sub 2}O{sub 3} Nanostructures

Gallium oxide nanodots of 220-300 nm diameters have been grown by SiO{sub 2}-assisted thermal evaporation. The grayish-white crust deposited on the crucible walls was proved to be crystalline Ga{sub 2}O{sub 3} through X-ray diffraction and TEM electron diffraction. The morphology of the samples examined by SEM confirmed the nanodot structure formation of average diameter 220{+-}30 nm and average density 1.77x108 cm{sup -2}. The absorption spectra of the Ga{sub 2}O{sub 3} suspension in water revealed two absorption peaks at 329.99 nm (3.76 eV) and 338.60 nm (3.67 eV). Photoemission of blue light at room temperature was observed at 410.3 nm under excitation at 330.00{+-}4.06 nm. The growth mechanism of the nanodots is explained by a liquid-vapor-solid mechanism. The measured remaining ingot hardness was found to be 16.6 Vickers hardness number, exceeding that of SiO{sub 2}. This might well indicate the existence of a certain percentage of the hardening Ga{sub 2}O{sub 3} compound in the remaining catalytic ingot.

36 MATERIALS SCIENCE↗

Scaling of the anomalous Hall effect in epitaxial antiperovskite Mn{sub 3.5}Dy{sub 0.5}N involving multiple competing scattering mechanisms

Anomalous Hall effect (AHE) has been studied for ferrimagnetic antiperovskite Mn{sub 3.5}Dy{sub 0.5}N film grown by molecular-beam epitaxy. Reflective high energy electron diffraction and transmission electron microscopy demonstrate the high quality of the film. We have used a scaling involving multiple competing scattering mechanisms to distinguish variations of contributions to the AHE by heavily doped Dy. The scaling analysis revealed that the heavily doped Dy has dramatically modified the skew scattering part of the AHE in Mn{sub 4}N and Mn{sub 3.5}Dy{sub 0.5}N has a totally different scattering mechanism from an undoped film.

36 MATERIALS SCIENCE↗