Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “DSC”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29

Uptake of aqueous heavy metal ions (Co2+, Cu2+ and Zn2+) by calcium-aluminium-silicate-hydrate gels

Highlights: • C-A-S-H gels containing metal ions (Co{sup 2+}, Cu{sup 2+} or Zn{sup 2+}) were precipitated by a sol-gel technique. • Uptake mechanism and immobilization capacity of divalent metal ions by C-A-S-H are elucidated. • Up to ~55–60 mol% of Zn can be incorporated in defective tobermorite-type C-A-S-H. • Metal uptake by C-A-S-H is controlled mainly by isomorphous substitution for Ca ions. • Crystal-chemical features of C-A-S-H gels and implications for practical application are discussed. Calcium-aluminium-silicate-hydrate (C-A-S-H) gels containing heavy metal ions (Me: Co{sup 2+}, Cu{sup 2+} or Zn{sup 2+}) were precipitated at different Me/Si molar ratios to study the uptake mechanism and immobilization capacity. Aqueous solution chemistry and solid-phase characterization using XRD, FTIR, ESEM-EDX, TEM-HAADF and TG-DSC methods reveal threshold values for ion substitution of ~55–60 mol% for Zn, ~30–40 mol% for Co and ~25–30 mol% for Cu in defective tobermorite-type C-A-S-H with (Ca + Me)/(Si + Al) molar ratios from 0.86 to 1.04. At higher aqueous Me concentrations, Me (chloride) hydroxides start to co-precipitate. The uptake mechanism of Me ions by C-A-S-H is based on (i) isomorphous substitution of Me for Ca in the CaO layer, (ii) ion exchange in the interlayer, (iii) tetrahedral substitution (Zn) within the dreierketten chains and (iv) surface adsorption onto the C-A-S-H gel structure. Systematics in crystal-chemistry of Me-bearing C-A-S-H and implications for application and performance in natural and man-made settings are discussed.

36 MATERIALS SCIENCE↗

Gas adsorption properties of ZSM-5 zeolites heated to extreme temperatures

Zeolites are broadly useful catalysts and molecular sieve adsorbents for purification. In this paper the thermal degradations of bare and platinum-loaded ZSM-5 was studied with the goal of understanding the behavior of nanoporous solids at extreme temperatures comparable to those present in nuclear fuels. Zeolites were heated in air and nitrogen at temperatures up to 1500 °C, and then characterized for thermal stability via X-ray diffraction (XRD) and for gas adsorption by the Brunauer-Emmett-Teller (BET) method. Scanning electron microscopy (SEM), differential scanning calorimetry (DSC) and thermal gravimetric analysis (TGA) were also employed. These results indicate zeolites are stable when heat-treated up to 800 °C and degrade slowly at higher temperatures. However, significant surface area degradation begins at 1025–1150 °C with an activation energy of 400 kJ/mole. At 1500 °C, gas adsorption measurements and SEM images show complete collapse of the porous structure. Finally, critically for nuclear fuel applications, however, the zeolites still adsorb helium in significant quantities.

36 MATERIALS SCIENCE↗

Vibrational Studies of Saccharide-Induced Lipid Film Reorganization at Aqueous/Air Interfaces

Vibrational sum frequency generation (VSFG) and surface tension experiments were used to examine the effects of aqueous phase soluble saccharides on the structure and organization of insoluble lipid monolayers adsorbed to aqueous-air interfaces. Changes in dipalmitoylphosphocholine (DPPC) chain structure as a function of aqueous phase saccharide concentration and pH are reported. Complementary differential scanning calorimetry (DSC) measurements performed on solutions containing soluble saccharides and DPPC vesicles measured the effects of the saccharides on the lipid membrane phase behavior. Here, data show that the saccharides glucosamine and glucuronic acid induce a higher degree of organization in compressed DPPC monolayers regardless of the saccharide’s charge.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Amantadine interactions with phase separated lipid membranes

Amantadine, a small amphilphic organic compound that consists of an adamantane backbone and an amino group, was first recognized as an antiviral in 1963 and received approval for prophylaxis against the type A influenza virus in 1976. Since then, it has also been used to treat Parkinson’s disease-related dyskinesia and is being considered as a treatment for corona viruses. Since amantadine usually targets membrane-bound proteins, its interactions with the membrane are also thought to be important. Biological membranes are now widely understood to be laterally heterogeneous and certain proteins are known to preferentially co-localize within specific lipid domains. Does amantadine, therefore, preferentially localize in certain lipid composition domains? To address this question, here, we studied amantadine’s interactions with phase separating membranes composed of cholesterol, DSPC (1,2-distearoyl-sn-glycero-3-phosphocholine), POPC (1-palmitoyl-2-oleoyl-glycero-3-phosphocholine), and DOPC (1,2-dioleoyl-sn-glycero-3-phosphocholine), as well as single-phase DPhPC (1,2-diphytanoyl-sn-glycero-3-phos-phocholine) membranes. From Langmuir trough and differential scanning calorimetry (DSC) measurements, we determined, respectively, that amantadine preferentially binds to disordered lipids, such as POPC, and lowers the phase transition temperature of POPC/DSPC/cholesterol mixtures, implying that amantadine increases membrane disorder. Further, using droplet interface bilayers (DIBs), we observed that amantadine disrupts DPhPC membranes, consistent with its disordering properties. Finally, we carried out molecular dynamics (MD) simulations on POPC/DSPC/cholesterol membranes with varying amounts of amantadine. Consistent with experiment, MD simulations showed that amantadine prefers to associate with disordered POPC-rich domains, domain boundaries, and lipid glycerol backbones. Since different proteins co-localize with different lipid domains, our results have possible implications as to which classes of proteins may be better targets for amantadine.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Nanostructural and rheological transitions of pH-responsive supramolecular systems involving a zwitterionic amphiphile and a triamine

Supramolecular aqueous complexes of a synthesized zwitterionic surfactant, 2-(dimethyl(octadecyl)ammonio)acetate (stearyl betaine) and diethylenetriamine, have been found to display pH-tunable rheological properties without the need for a co-surfactant. For this supramolecular system, the dynamically changing interplay among the constituents is responsible for the rich phase behavior including hollow nanotubules, bilayers, and vesicles. A further hypothesis is that hollow nanotubular structure is highly desirable for achieving chain entanglement geometries with reduced mesh size. The rheological properties of the suspension were measured using a rotational rheometer. An analysis using zero-shear viscosities at various temperatures as well as differential scanning calorimetry(DSC) helped shed light on thermodynamic and phase transitions taking place. The morphology of the suspension was analyzed by using a combination of small angle x-ray scattering(SAXS) and atomic force microscopy(AFM). Large steady-shear viscosities (up to ~160 Pa.s) and viscoelastic behavior was observed in acidic conditions which diminished upon increasing the pH. A novel analysis consisting of measured thermodynamic quantities such as activation energy(E a ) and enthalpy of transition(ΔH T ) further allude to the rich pH-sensitive nanoarchitecture of the system. Rather than commonly observed wormlike micelles, hollow nanotubules, as long as 1.6 µm were observed at pH 4 which disintegrated to bilayer sheets and vesicles upon increasing pH. Finally, gaining a comprehensive understanding from all the results, a transition mechanism between different suspension architectures was proposed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Combustion in the ZrF 4 -Mg-Si and ZrF 4 -Al-Si systems for preparation of zirconium silicides

The exothermic reactions in the ZrF 4 –Mg-Si and ZrF 4 -Al-Si systems are investigated by a fast temperature recording (thermocouple) technique, differential scanning calorimetry (DSC), and thermogravimetric analysis (TGA). A quenching method is used to arrest the combustion process and conduct a layer-by-layer analysis of the products by x-ray diffraction (XRD) and electron microscopy. Two seemingly similar reactive systems exhibited considerably different combustion characteristics, composition, and morphology. Based on these investigations, we propose and discuss phase formation mechanisms at the early stages for each system. Three different pathways involving the reaction of ZrF 4 with other reagents and the Mg 2 Si intermediate are identified to occur in the ZrF 4 –Mg-Si system. Contrary to the complex mechanism in the ZrF 4 –Mg-Si system, the early stage of the combustion process for the ZrF 4 -Al-Si system involves the interaction of ZrF 4 with Al-Si eutectic melt. The exothermic reaction between reduced solid Zr and Si melt is the primary heat-generating step for both systems in spite of substantial differences in the early stages of the reactions. The silicon content in the reactive mixtures governs the phase composition of products. The ZrSi 2 phase, with a high growth rate, forms first on the Zr particle surfaces and then grows by a reactive diffusion mechanism. The ZrSi 2+ Zr reaction produces silicon-lean phases (e.g., ZrSi) when the silicon supply is limited. The combustion temperature also has a considerable influence on the phase compositions of the products. High combustion temperature in the ZrF 4 +2Mg+Si mixture enables the formation of multiphase products (α-ZrSi and β-ZrSi), whereas the relatively lower temperatures in the 3ZrF 4 +4Al+3Si mixture yields a single-phase α-ZrSi. As a result, lower combustion temperatures also make the ZrF 4 -Al-Si system more advantageous for the preparation of zirconium silicides.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Macro-level mechanical interlocking: A rapid joining approach for additively manufactured compression molded composite panels

Composite joining typically involves multiple steps, such as drilling and surface treatment, as part of the manufacturing process, which leads to low throughput and long cycle times. In the present study, we demonstrated a macro-level mechanical interlocking (MI) based, rapid joining technique to assemble additively manufactured compression molded (AMCM) panels, enabling the production of parts larger than the mold dimensions. Composite panels made of 20 wt% short carbon fiber reinforced acrylonitrile butadiene styrene (CF/ABS) were joined using MI features of various geometries, namely tree (TR), dovetail (Dov), rectangle 2 (Rect2), and rectangle 1 (Rect1), and their in-plane strength was evaluated. The resultant strength of the tested MI joints reached up to 74 % of the baseline tensile strength (i.e., the ‘no joint’ case). Observations from optical and scanning electron microscopy revealed inadequate polymer diffusion between the adherends, indicating that the joint strength was primarily derived from mechanical interlocking. Additionally, the fracture surfaces exhibited stress-whitening marks, which were characterized using differential scanning calorimetry (DSC). The increase in melting enthalpy suggested local stretching of polymer chains due to MI. Finite element analysis (FEA) indicated that the Rect1 MI feature, which generated the lowest stress concentration, outperformed the others in terms of joint strength, achieving 42 MPa. As a demonstration of the MI joining method, a battery box tray measuring 108 cm × 34 cm using a mold with an effective dimension of 36 cm × 34 cm successfully manufactured, resulting in a part with an area three times larger than the mold. In conclusion, this study presents a promising approach to improving composite joining techniques while minimizing production complexities.

In-plane joining↗

Improving the adhesion of glass/polypropylene (glass-PP) and high-density polyethylene (HDPE) surfaces by open air plasma treatment

The objective of this study was to investigate the bonding between glass reinforced polypropylene (glass-PP) and high-density polyethylene (HDPE) surfaces. As glass-PP and HDPE surfaces possess low surface energy inherently, atmospheric plasma treatment enhances the adhesion characteristics between the surfaces by increasing their surface energies. Both the materials were subjected to atmospheric/air plasma by varying parameters such as plasma intensity and number of treatments. Optimal plasma treatment conditions were determined based on the bond strength of the materials. Various characterization techniques such as FTIR (Fourier transform infrared spectroscopy), SEM (scanning electron microscopy), DSC (differential scanning calorimetry) and surface energy determination via wettability inks, were employed to understand the surface modification following plasma treatment. Furthermore, the effect of plasma treatment on glass-PP surface versus a neat polypropylene (neat PP) surface was characterized to understand and establish a baseline. Improvement in bond strength of glass-PP-HDPE panels was observed, GΙc (Mode 1 interlaminar fracture toughness) value of glass-PP- HDPE panels increased from 0.1 N/mm to 5.5 N/mm (after plasma treatment) whereas, the GΙc value of neat PP- HDPE panels increased from 0.4 N/mm to 2.8 N/mm (after plasma treatment). Enhancement in the surface energy of glass-PP and HDPE surfaces was observed, surface energy of glass-PP increased from 28 mN/m to 58 mN/m and the surface energy of HDPE surface increased from 28 mN/m to 72 mN/m.

42 ENGINEERING↗

Hydrogen isotope effects on the structural phase transition of NH₃BH₃

A systematic study of the structural phase transition of NH₃BH₃ and of its fully deuterated analogue was performed combining DSC and anelastic spectroscopy measurements. The transition is accompanied by a latent heat, and therefore is of the 1st order. On the deuterated sample the enthalpy variation is reduced of more than 20%, from 1.29 to 1.01 kJ/mol and the transition is shifted by -1.5 K toward higher temperatures. Both NH₃BH₃ and ND₃BD₃ display a temperature hysteresis between cooling and heating, thus denoting that the phase transition is of first-order. In addition, this hysteresis is extremely small (-0.5 K) indicating that the coexistence region between the two phases is very narrow. During isothermal ageing, the transformation of the low-temperature orthorhombic phase into the high-temperature tetragonal one occurs with a time constant of -16 min in NH₃BH₃ and -64 min in ND₃BD₃, evidencing a drastic slowing down of kinetics in the deuterated compound.

08 HYDROGEN↗

Modeling and Characterization of the Magnetocaloric Effect in Ni2MnGa Materials

Magnetic shape memory alloys have great promise as magneto-caloric effect refrigerant materials due to their combined magnetic and structural transitions. Computational and experimental research is reported on the Ni2MnGa material system. The magnetic states of this system are explored using the Wang-Landau statistical approach in conjunction with the Locally Self-consistent Multiple-Scattering method. The effects of alloying agents on the transition temperatures of the Ni2MnGa alloy are investigated using differential scanning calorimetry and superconducting quantum interference device. Experiments are performed at the Spallation Neutron Source at Oak Ridge National Laboratory to observe the structural and magnetic phase transformations.

magneto caloric↗

Pulmonary Ventilation Imaging Based on 4-Dimensional Computed Tomography: Comparison With Pulmonary Function Tests and SPECT Ventilation Images

Purpose: 4-dimensional computed tomography (4D-CT)-based pulmonary ventilation imaging is an emerging functional imaging modality. The purpose of this study was to investigate the physiological significance of 4D-CT ventilation imaging by comparison with pulmonary function test (PFT) measurements and single-photon emission CT (SPECT) ventilation images, which are the clinical references for global and regional lung function, respectively. Methods and Materials: In an institutional review board–approved prospective clinical trial, 4D-CT imaging and PFT and/or SPECT ventilation imaging were performed in thoracic cancer patients. Regional ventilation (V{sub 4DCT}) was calculated by deformable image registration of 4D-CT images and quantitative analysis for regional volume change. V{sub 4DCT} defect parameters were compared with the PFT measurements (forced expiratory volume in 1 second (FEV{sub 1}; % predicted) and FEV{sub 1}/forced vital capacity (FVC; %). V{sub 4DCT} was also compared with SPECT ventilation (V{sub SPECT}) to (1) test whether V{sub 4DCT} in V{sub SPECT} defect regions is significantly lower than in nondefect regions by using the 2-tailed t test; (2) to quantify the spatial overlap between V{sub 4DCT} and V{sub SPECT} defect regions with Dice similarity coefficient (DSC); and (3) to test ventral-to-dorsal gradients by using the 2-tailed t test. Results: Of 21 patients enrolled in the study, 18 patients for whom 4D-CT and either PFT or SPECT were acquired were included in the analysis. V{sub 4DCT} defect parameters were found to have significant, moderate correlations with PFT measurements. For example, V{sub 4DCT}{sup HU} defect volume increased significantly with decreasing FEV{sub 1}/FVC (R=−0.65, P<.01). V{sub 4DCT} in V{sub SPECT} defect regions was significantly lower than in nondefect regions (mean V{sub 4DCT}{sup HU} 0.049 vs 0.076, P<.01). The average DSCs for the spatial overlap with SPECT ventilation defect regions were only moderate (V{sub 4DCT}{sup HU}0.39 ± 0.11). Furthermore, ventral-to-dorsal gradients of V{sub 4DCT} were strong (V{sub 4DCT}{sup HU} R{sup 2} = 0.69, P=.08), which was similar to V{sub SPECT} (R{sup 2} = 0.96, P<.01). Conclusions: An 18-patient study demonstrated significant correlations between 4D-CT ventilation and PFT measurements as well as SPECT ventilation, providing evidence toward the validation of 4D-CT ventilation imaging.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Implementation of a Novel Algorithm For Generating Synthetic CT Images From Magnetic Resonance Imaging Data Sets for Prostate Cancer Radiation Therapy

Purpose: To describe and evaluate a method for generating synthetic computed tomography (synCT) images from magnetic resonance simulation (MR-SIM) data for accurate digitally reconstructed radiograph (DRR) generation and dose calculations in prostate cancer radiation therapy. Methods and Materials: A retrospective evaluation was performed in 9 prostate cancer patients who had undergone MR-SIM in addition to CT simulation (CT-SIM). MR-SIM data were used to generate synCT images by using a novel, voxel-based weighted summation approach. A subset of patients was used for weight optimization, and the number of patients to use during optimization was determined. Hounsfield unit (HU) differences between CT-SIM and synCT images were analyzed via mean absolute error (MAE). Original, CT-based treatment plans were mapped onto synCTs. DRRs were generated, and agreement between CT and synCT-generated DRRs was evaluated via Dice similarity coefficient (DSC). Dose was recalculated, and dose-volume metrics and gamma analysis were used to evaluate resulting treatment plans. Results: Full field-of-view synCT MAE across all patients was 74.3 ± 10.9 HU with differences from CTs of 2.0 ± 8.1 HU and 11.9 ± 46.7 HU for soft tissue structures (prostate, bladder, and rectum) and femoral bones, respectively. Calculated DSCs for anterior-posterior and lateral DRRs were 0.90 ± 0.04 and 0.92 ± 0.05, respectively. Differences in D99%, mean dose, and maximum dose to the clinical target volume from CT-SIM dose calculations were 0.75% ± 0.35%, 0.63% ± 0.34%, and 0.54% ± 0.33%, respectively, for synCT-generated plans. Gamma analysis (2%/2 mm dose difference/distance to agreement) revealed pass rates of 99.9% ± 0.1% (range, 99.7%-100%). Conclusion: Generated synCTs enabled accurate DRR generation and dose computation for prostate MR-only simulation. Dose recalculated on synCTs agreed well with original planning distributions. Further validation using a larger patient cohort is warranted.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

A study on the surface severe plastic deformation behavior of a Zr-based bulk metallic glass (BMG)

A surface treatment process, which can generate the severe plastic deformation in the near-surface layer of crystalline materials, is successfully applied on the Zr{sub 50}Cu{sub 40}Al{sub 10} bulk metallic glass (BMG). The experiment is implemented using 20 WC/Co balls with a velocity of about 5 m/s to bombard the surface of the samples in a purified argon atmosphere. The plastic-flow deformation in the unconstrained sample edge was observed, which exhibits the good intrinsic ductility of this material under the experimental condition. In the sub-surface layer, the bombardment-induced shear-band operations generate the extrusion and intrusion marks on the side face. Differential scanning calorimetry (DSC) shows that the free volumes of the deformed BMG have increased, and possible crystallization may occur during the process. X-ray diffraction (XRD) and synchrotron high-energy X-ray diffraction techniques were used to inspect the possible crystal phase. A nanoindentation test shows that on the side surface, the hardness increases and, then, decreases with the distance from the processed surface. Four-point-bending-fatigue behavior has been studied and related to the modified surface structure and the compressive residual stress introduced by the surface treatment.

43 PARTICLE ACCELERATORS↗

Magnetic properties of Ni 40+x Mn 39-x Sn 21 (x = 0, 2, 4, 6 and 8 at.%) Heusler alloys

The low electron concentration region (e/a < 7.75) of the magnetic phase diagram of the off-stoichiometric Ni–Mn–Sn Heusler alloys was investigated in detail by DSC and magnetization measurements of the Ni 40+x Mn 39-x Sn 21 (x = 0, 2, 4, 6 and 8 at.%) alloys. The alloys show a stable austenitic phase without any martensitic transformation down to 5 K even after heat treatment. The Curie temperature exhibits a broad maximum over a large composition range. The evolution of the magnetic moment with the electron concentration fits the data of previous studies and confirms the peak-like dependence in the extended range of e/a values predicted by ab initio calculations. Finally, the explored part of the moment versus e/a curve can be explained in terms of a localized magnetic moment model and full atomic order in the alloys.

36 MATERIALS SCIENCE↗

Prediction of good glass forming ability in amorphous soft magnetic alloys by thermocalc simulation with experimental validation

Alloys in a (Fe 70 Ni 30 ) 80 (BeSieNb) 20 system, with good glass forming ability (GFA), were identified using Thermocalc software to simulate liquidus temperatures (T's) and solidification ranges (areas between the liquidus and solidus in a binary phase diagram,a line at fixed T). Here, a region with excellent GFA was identified at 14-18% B and 0-7% Si with the balance Nb, showing minima in liquidus and solidification range. A region with a solidification range minimum, but no corresponding liquidus minimum was identified at 3-8% B and 5-10% Si but had lower GFA. A shallow liquidus minimum, with no minimum in solidification range, at 3-5% B and 1-3% Si had the lowest GFA and did not produce amorphous material. Measured GFA was ranked using parameters T rg , DT xg , and γ m , defined herein. Only the reduced glass transition temperature, T rg , was predictive for the alloys. Differential Scanning Calorimetry (DSC) data showed liquidus T's to agree. Curie temperatures, T c 's were observed to increase with B/Nb ratio. Simulations of liquidus and solidification range for alloys with 18 and 15% glass formers do not show regions with minima in both, indicating good GFA is not expected.

36 MATERIALS SCIENCE↗

Thermophysical properties of high-density, sintered monoliths of yttrium dihydride in the range 373–773 K

Yttrium dihydride is a promising nuclear reactor moderator for high-temperature, thermal micro-reactors due to its ability to retain hydrogen to high temperatures while having a relatively low impact on neutron economy. However, it is difficult to fabricate yttrium dihydride in high-density, near net-shape monoliths for moderator applications due to challenges associated with the hydrogen absorption process. Here, high-density monoliths of yttrium dihydride were prepared by powder metallurgical methods. The lattice strain and thermal expansion coefficient were measured using neutron diffraction of powders of directly-hydrided yttrium, while the molar heat capacity and thermal diffusivity of sintered yttrium dihydride were measured using differential scanning calorimetry (DSC) and laser flash analysis (LFA), respectively. The molar heat capacity of yttrium dihydride was also calculated using density functional theory (DFT) for comparison. These parameters were used to then calculate the thermal conductivity and resistivity of yttrium dihydride as a function of temperature. The thermophysical properties of materials produced by both methods were observed to be consistent with the values from literature for yttrium dihydride. Due to the novelty of producing yttrium dihydride by powder metallurgical methods, this result indicated that the sintered monoliths were of high quality and that powder metallurgy is a viable method for large-scale production of yttrium dihydride monoliths for nuclear reactor moderator applications.

36 MATERIALS SCIENCE↗

Thermodynamic properties of Gd-Bi alloys determined by emf measurements in LiCl-KCl-GdCl 3 electrolyte

Thermodynamic properties of binary Gd-Bi alloys (mole fraction, x Gd = 0.02–0.35) were determined using electromotive force (emf) measurements in molten LiCl-KCl-GdCl 3 electrolyte in complement with structural, microstructural, and thermal characterization. X-ray diffractometry (XRD) and scanning electron microscopy (SEM) identified the phase constituents of Gd-Bi alloys (x Gd = 0.02–0.35) as Bi matrix and GdBi compound. According to differential scanning calorimetry (DSC) measurements up to 1250 K, a eutectic transition [L = Bi + GdBi] was observed at 543 K but the reported peritectic transition [L + GdBi = GdBi 2 ] was not detected, suggesting the absence of the GdBi 2 compound. Based on structural, microstructural, and thermal characterization of Gd-Bi alloys (x Gd = 0.02–0.35), the GdBi 2 compound was not detected, and its thermodynamic stability is questionable. The emf of Gd-Bi alloy (x Gd = 0.16) at 700–1048 K relative to Gd(s) was measured by electrodepositing pure Gd metal at 25 K increments. Further, the emf values of Gd-Bi alloys were determined via coulometric titration of Gd into liquid Bi using a two-phase [L + GdBi] alloy as a reference electrode at 773–973 K. The solubility of Gd in liquid Bi was also estimated to be 0.50 mol% (773 K), 0.99 mol% (873 K), and 2.21 mol% (973 K) and the excess partial molar Gibbs energy (Δ$\mathrm{\bar{G}^{ex}_{Gd}}$) of liquid Gd-Bi alloys was as low as 65 kJ mol –1 , indicating strong chemical interactions between Gd and Bi.

36 MATERIALS SCIENCE↗