Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Curves”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Sister Rod Destructive Examinations (FY23) Appendix F3: Uncertainty and Conservative Bias in the Cyclic Integrated Reversible-Bending Fatigue Test

The development and application of the Cyclic Integrated Reversible-Bending Fatigue Tester (CIRFT) has been documented over the past 10 years. The CIRFT system was developed in collaboration with the U.S. Nuclear Regulatory Commission (NRC) to address the concern that high-burnup fuel rod fatigue performance was degraded compared to cladding-only behavior. Fatigue data measured by CIRFT on high-burnup fuel rods were then used by the NRC to develop a fatigue response curve for pressurized water reactor fuel rods with Zircaloy-4 cladding in NUREG-2224. Subsequently, CIRFT has been used in the sister rod project to test whether reoriented hydrides associated with vacuum drying influenced the fatigue lifetime, to extend the fatigue testing database to include fuel rods with ZIRLO cladding, and to add to the experience on both Zircaloy-4 and M5 cladding. These data will be used as a reference for subsequent characterization of fuel rods removed from the high-burnup demonstration cask to better understand the effects of long-term dry storage, which can be thought of as a multiyear elevated temperature anneal. The objective of fatigue testing is to provide data that can be used to develop a best-estimate fatigue curve and a conservative fatigue design curve that accounts for uncertainty and can be compared with actual transportation conditions. The process for defining a design fatigue curve for commercial used fuel rods was developed by Oak Ridge National Laboratory (ORNL) in FY22. One issue noted in the fatigue evaluation was that the calculated combined uncertainty in the strain amplitude values determined from the measured data was large. It was proposed then to directly measure the uncertainty in the strain amplitude to either validate the calculated combined uncertainty or update the uncertainty based on the measurement data. Thus, the purpose of this appendix is to document the measured uncertainty in the strain amplitude data. In the process, it was determined that there has been a conservative bias in the calculated strain amplitude that is small enough to be within the measurement uncertainty. This observation is discussed herein, and a case is made to continue to include the conservative bias in the data.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2025

Additive manufacturing of amorphous metal soft magnetic composites

Soft magnet alloys are used as magnetic cores for electric motors, transformers, wind turbines and other power generation systems. Soft magnetic cores are expensive and time consuming to manufacture in the complex shapes required for next-generation devices using conventional press and sinter powder metallurgy. The objective of this effort is to additively manufacture high performance soft magnets, with reduced cost and reduced material waste and 10x lower energy (core) loss at the high operating frequencies of many electric machines. Laser powder bed fusion additive manufacturing is used as the fabrication method. Electrical steel and amorphous alloys atomized powders are used as a feedstock materials. Magnetic cores are printed in topology optimized structures such as the Hilbert curve because this has been shown to reduce energy losses by minimizing the eddy currents that circulate within the magnet at high frequencies. In our project, we succeed in printing FeSi 3.5wt% and FeSi 6.5wt% electrical steels, and iron-based soft magnetic amorphous alloys in the shape of Hilbert and Peano curve topology optimized structures. We found that the Peano curve has a higher cut-off frequency than the Hilbert curve, and that amorphous alloys have high cut-off frequencies and higher mechanical hardness than electrical steels. Processing conditions such as laser power, scan speed, and hatching pattern were optimized to achieve high density prints, and optimize magnetic performance. We find that the printing of amorphous alloy soft magnetic cores may be technoeconomically feasible for large scale applications such as transformers, for which supply chain issues and the labor costs of manual fabrication of magnetic cores is prohibitive in some cases.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Simultaneous Optical Transmission Spectroscopy of a Terrestrial, Habitable-zone Exoplanet with Two Ground-based Multiobject Spectrographs

Investigating the atmospheres of rocky exoplanets is key to performing comparative planetology between these worlds and the terrestrial planets that reside in the inner solar system. Terrestrial exoplanet atmospheres exhibit weak signals, and attempting to detect them pushes at the boundaries of what is possible for current instrumentation. We focus on the habitable-zone terrestrial exoplanet LHS 1140b. Given its 25-day orbital period and 2 hr transit duration, capturing transits of LHS 1140b is challenging. We observed two transits of this object, approximately 1 yr apart, which yielded four data sets thanks to our simultaneous use of the IMACS and LDSS3C multiobject spectrographs mounted on the twin Magellan telescopes at Las Campanas Observatory. We present a jointly fit white light curve, as well as jointly fit 20 nm wavelength-binned light curves from which we construct a transmission spectrum. Binning the joint white light-curve residuals to 3-minute time bins gives an rms of 145 ppm; binning down to 10-minute time bins gives an rms of 77 ppm. Our median uncertainty in R{sub p}{sup 2}/R{sub s}{sup 2} in the 20 nm wavelength bins is 260 ppm, and we achieve an average precision of 1.3× the photon noise when fitting the wavelength-binned light curves with a Gaussian process regression. Our precision on R{sub p}{sup 2}/R{sub s}{sup 2} is a factor of four larger than the feature amplitudes of a clear, hydrogen-dominated atmosphere, meaning that we are not able to test realistic models of LHS 1140b’s atmosphere. The techniques and caveats presented here are applicable to the growing sample of terrestrial worlds in the Transiting Exoplanet Survey Satellite era, as well as to the upcoming generation of ground-based giant segmented mirror telescopes.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

Spectral Variability of VHS J1256–1257b from 1 to 5 μm

Multiwavelength time-resolved observations of rotationally modulated variability from brown dwarfs and giant exoplanets are the most effective method for constraining their heterogeneous atmospheric structures. In a companion paper, we reported the discovery of strong near-infrared variability in HST/WFC3/G141 light curves of the very red L-dwarf companion VHS J1256–1257b. In this paper, we present a follow-up 36 hr Spitzer/IRAC Channel 2 light curve together with an in-depth analysis of the Hubble space telescope (HST) and the Spitzer data. The combined data set provides time-resolved light curves of VHS1256b sampling 1.1 to 4.5 μm. The Spitzer light curve is best fit with a single sine wave with a period of 22.04 ± 0.05 hr and a peak-to-peak amplitude of 5.76 ± 0.04%. Combining the period with a previously measured projected rotational velocity (v sin i), we find that VHS1256b is most consistent with equatorial viewing geometry. The HST/G141+Spitzer spectral energy distribution favors a model with a T{sub eff} of 1000 K and low surface gravity with disequilibrium chemistry. The spectral variability of VHS1256b is consistent with predictions from partly cloudy models, suggesting that heterogeneous clouds are the dominant source of the observed modulations. We find evidence at the 3.3σ level for amplitude variations within the 1.67 μm CH{sub 4} band, which is the first such detection for a variable L-dwarf. We compare the HST/G141 time-resolved spectra of three red L-dwarfs with high-amplitude near-infrared rotational modulations and find that although their time-averaged spectra are similar, their spectroscopic variabilities exhibit notable differences. This diversity reinforces the advantage of time-resolved spectroscopic observations for understanding the atmospheres of brown dwarfs and directly imaged exoplanets.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

Dust Reverberation Mapping in Distant Quasars from Optical and Mid-infrared Imaging Surveys

The size of the dust torus in active galactic nuclei (AGNs) and their high-luminosity counterparts, quasars, can be inferred from the time delay between UV/optical accretion disk continuum variability and the response in the mid-infrared (MIR) torus emission. This dust reverberation mapping (RM) technique has been successfully applied to ~70 z ≲ 0.3 AGNs and quasars. Here we present first results of our dust RM program for distant quasars covered in the Sloan Digital Sky Survey Stripe 82 region combining ~20 yr ground-based optical light curves with 10 yr MIR light curves from the WISE satellite. Here, we measure a high-fidelity lag between W1 band (3.4 μm) and g band for 587 quasars over 0.3 ≲ z ≲ 2 () and two orders of magnitude in quasar luminosity. They tightly follow (intrinsic scatter ~0.17 dex in lag) the IR lag–luminosity relation observed for z < 0.3 AGNs, revealing a remarkable size–luminosity relation for the dust torus over more than four decades in AGN luminosity, with little dependence on additional quasar properties such as Eddington ratio and variability amplitude. This study motivates further investigations in the utility of dust RM for cosmology and strongly endorses a compelling science case for the combined 10 yr Vera C. Rubin Observatory Legacy Survey of Space and Time (optical) and 5 yr Nancy Grace Roman Space Telescope 2 μm light curves in a deep survey for low-redshift AGN dust RM with much lower luminosities and shorter, measurable IR lags. The compiled optical and MIR light curves for 7384 quasars in our parent sample are made public with this work.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

The Multipolar Magnetic Field of the Millisecond Pulsar PSR J0030+0451

Modeling of the NICER X-ray waveform of the pulsar PSR J0030+0451, aimed at constraining the neutron star mass and radius, has inferred surface hot spots (the magnetic polar caps) that imply significantly nondipolar magnetic fields. To this end, we investigate magnetic field configurations that comprise offset dipole-plus-quadrupole components using a static vacuum field and force-free global magnetosphere models. Taking into account the compactness and observer angle values provided by Miller et al. and Riley et al., we compute geodesics from the observer plane to the polar caps to compute the resulting X-ray light curve. We explore, through Markov Chain Monte Carlo techniques, the detailed magnetic field configurations that can reproduce the observed X-ray light curve and have discovered degeneracies, i.e., diverse field configurations, which can provide sufficient descriptions of the NICER X-ray waveforms. Having obtained the force-free field structures, we then compute the corresponding synchronous γ-ray light curves following Kalapotharakos et al.; these we compare to those obtained by Fermi-LAT, to provide models consistent with both the X-ray and the γ-ray data, thereby restricting further the multipole field parameters. An essential aspect of this approach is the proper computation of the relative phase between the synchronous X- and γ-ray light curves. We conclude with a discussion of the broader implications of our study.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

Simultaneous Multiwavelength Flare Observations of EV Lacertae

Here we present the first results of our ongoing project conducting simultaneous multiwavelength observations of flares on nearby active M dwarfs. We acquired data of the nearby dM3.5e star EV Lac using five different observatories: NASA’s Transiting Exoplanet Survey Satellite (TESS), NASA’s Neil Gehrels Swift Observatory (Swift), NASA’s Neutron Interior Composition Explorer (NICER), the University of Hawaii 2.2-meter telescope (UH88), and the Las Cumbres Observatory Global Telescope (LCOGT) Network. During the ~25 days of TESS observations, we acquired three simultaneous UV/X-ray observations using Swift that total ~18 ks, 21 simultaneous epochs totaling ~98 ks of X-ray data using NICER, one observation (~3 hr) with UH88, and one observation (~3 hr) with LCOGT. We identified 56 flares in the TESS light curve with estimated energies in the range log E T (erg) = (30.5–33.2), nine flares in the Swift UVM2 light curve with estimated energies in the range log E UV (erg) = (29.3–31.1), 14 flares in the NICER light curve with estimated minimum energies in the range log E N (erg) = (30.5–32.3), and 1 flare in the LCOGT light curve with log E L (erg) = 31.6. We find that the flare frequency distributions (FFDs) of TESS and NICER flares have comparable slopes, β T = -0.67 ± 0.09 and β N = - 0.65 ± 0.19, and the FFD of UVOT flares has a shallower slope (β U = -0.38 ± 0.13). Furthermore, we do not find conclusive evidence for either the first ionization potential (FIP) or the inverse FIP effect during coronal flares on EV Lac.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2023

K2 Optical Emission from OJ 287 and Other γ-Ray Blazars on Hours-to-weeks Timescales from 2014 to 2018

We present second observations by K2 of OJ 287 and seven other γ-ray active galactic nuclei (AGNs) obtained in 2017–2018, second and third observations of the lobe-dominated, steep-spectrum quasar 3C 207, and observations of nine additional blazars not previously observed with K2. The AGNs were observed simultaneously with K2 and the Fermi Large Area Telescope for 51–81 days. Our full sample, observed in 2014–2018, contained 16 BL Lacertae objects (BL Lacs), nine flat-spectrum radio quasars (FSRQs), and four other γ-ray AGNs. Twelve BL Lacs and seven FSRQs exhibited fast, jagged light curves, while four BL Lacs and two FSRQs had slow, smooth light curves. Some objects changed their red-noise character significantly between repeated K2 observations. The optical characteristics of OJ 287 derived from the short-cadence K2 light curves changed between observations made before and after the predicted passage of the suspected secondary supermassive black hole through the accretion disk of the primary supermassive black hole. The average slopes of the periodogram power spectral densities of the BL Lacs' and FSRQs' light curves differed significantly, by ≈12%, with the BL Lac slopes being steeper, and a Kolmogorov–Smirnov test with a p-value of 0.039 indicates that these samples probably come from different populations; however, this result is not as strongly supported by power spectral response (PSRESP) analyses. Differences in the origin of the jets from the ergosphere or accretion disk in these two classes could produce such a disparity, as could different sizes or locations of emission regions within the jets.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

High-quality Extragalactic Legacy-field Monitoring (HELM) with DECam

High-quality Extragalactic Legacy-field Monitoring (HELM) is a long-term observing program that photometrically monitors several well-studied extragalactic legacy fields with the Dark Energy Camera (DECam) imager on the CTIO 4m Blanco telescope. Since Feb 2019, HELM has been monitoring regions within COSMOS, XMM-LSS, CDF-S, S-CVZ, ELAIS-S1, and SDSS Stripe 82 with few-day cadences in the $(u)gri(z)$ bands, over a collective sky area of $\sim 38$ deg${\rm ^2}$. The main science goal of HELM is to provide high-quality optical light curves for a large sample of active galactic nuclei (AGNs), and to build decades-long time baselines when combining past and future optical light curves in these legacy fields. These optical images and light curves will facilitate the measurements of AGN reverberation mapping lags, as well as studies of AGN variability and its dependences on accretion properties. In addition, the time-resolved and coadded DECam photometry will enable a broad range of science applications from galaxy evolution to time-domain science. We describe the design and implementation of the program and present the first data release that includes source catalogs and the first $\sim 3.5$ years of light curves during 2019A--2022A.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

Supernova Siblings: Assessing the Consistency of Properties of Type Ia Supernovae that Share the Same Parent Galaxies

While many studies have shown a correlation between properties of the light curves of SNe Ia and properties of their host galaxies, it remains unclear what is driving these correlations. We introduce a new direct method to study these correlations by analyzing "parent" galaxies that host multiple SNe Ia "siblings." In this study, we search the Dark Energy Survey SN sample, one of the largest samples of discovered SNe, and find eight galaxies that hosted two likely SNe Ia. Comparing the light-curve properties of these SNe and recovered distances from the light curves, we find no better agreement between properties of SNe in the same galaxy as any random pair of galaxies, with the exception of the SN light-curve stretch. We show at 2.8 σ significance that at least one-half of the intrinsic scatter of SNe Ia distance modulus residuals is not from common host properties. We also discuss the robustness with which we could make this evaluation with LSST, which will find 100 &#x00d7; more pairs of galaxies, and pave a new line of study on the consistency of SNe Ia in the same parent galaxies. Finally, we argue that it is unlikely that some of these SNe are actually single, lensed SN with multiple images.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2023

Limit on Supernova Emission in the Brightest Gamma-Ray Burst, GRB 221009A

We present photometric and spectroscopic observations of the extraordinary gamma-ray burst (GRB) 221009A in search of an associated supernova. Some past GRBs have shown bumps in the optical light curve that coincide with the emergence of supernova spectral features, but we do not detect any significant light-curve features in GRB 221009A, nor do we detect any clear sign of supernova spectral features. Using two well-studied GRB-associated supernovae (SN 2013dx, M r,max =-19.54;$ SN 2016jca, M r,max =-19.04$) at a similar redshift as GRB 221009A (z = 0.151), we modeled how the emergence of a supernova would affect the light curve. If we assume the GRB afterglow to decay at the same rate as the X-ray data, the combination of afterglow and a supernova component is fainter than the observed GRB brightness. For the case where we assume the best-fit power law to the optical data as the GRB afterglow component, a supernova contribution should have created a clear bump in the light curve, assuming only extinction from the Milky Way. If we assume a higher extinction of E(B - V) = 1.74 mag (as has been suggested elsewhere), the supernova contribution would have been hard to detect, with a limit on the associated supernova of M r,max ≈ -$19.54. We do not observe any clear supernova features in our spectra, which were taken around the time of expected maximum light. The lack of a bright supernova associated with GRB 221009A may indicate that the energy from the explosion is mostly concentrated in the jet, leaving a lower energy budget available for the supernova.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

Computer-aided design file format for additive manufacturing and methods of file generation

A method of generating a tessellated output file comprising receiving a computer-aided design (CAD) model file defining a CAD model including a plurality of vertices, a plurality of curves, a plurality of surfaces, and at least one volume; generating base polygon data defining the CAD model for additive manufacturing, the base polygon data including a plurality of connected polygons, each polygon including a plurality of nodes, a plurality of edges, and a face; generating data for a vertex metadata container including a listing of CAD model vertices and one polygon node associated with each CAD model vertex; generating data for a curve metadata container including a listing of CAD model curves and at least one polygon edge associated with each CAD model curve; and generating data for a surface metadata container including a listing of CAD model surfaces and at least one polygon face associated with each CAD model surface.

Vernon, Gregory John↗
DOE OSTI2022

Macroalgae farming including attaching seaweed to a line

An apparatus for attaching vegetative propagules to a longline that may include a clip portion having a curved area sized to receive a stem of a vegetative propagule and having an opening to the curved area smaller than the curved area to secure the vegetative propagule in the curved area; a tapered barrel that is inserted into a longline; and a rigid connection by a tower between the clip portion and the tapered barrel. Also disclosed is a macroalgae farm including the apparatus for attaching vegetative propagules to a longline.

09 BIOMASS FUELS↗
DOE OSTI2022

Enabling Grid-Aware Market Participation of Aggregate Flexible Resources

Increasing integration of distributed energy resources (DERs) within distribution feeders provides unprecedented flexibility at the distribution-transmission interconnection. With the new FERC 2222 order, DER aggregations are allowed to participate in energy market. To enable market participation, these virtual power plants need to provide their generation cost curves. This paper proposes efficient optimization formulations and solution approaches for the characterization of hourly as well as multi-time-step generation cost curves for a distribution system with high penetration of DERs. Network and DER constraints are taken into account when deriving these cost curves, and they enable active distribution systems to bid into the electricity market. The problems of deriving linear and quadratic cost curves are formulated as robust optimization problems and tractable reformulation/solution algorithm are developed to facilitate efficient calculations. The proposed formulations and solution algorithm are validated on a realistic test feeder with high penetration of flexible resources.

aggregated distributed energy resources↗
DOE OSTI2024

Multiobjective Constrained Symbolic Regression for Predictive Modeling of Material Creep Behavior

When creep testing is repeated on samples of the same alloy under the same parametric conditions (i.e., stress and temperature), the resulting strain/time curves can vary from each other considerably as shown in Figure 1 [1]. The time required to creep test a material to rupture can extend to the order of years. Because of this, a numerical model that can quickly analyze the incomplete results of an ongoing experiment to predict 1) the incomplete portion of the strain/time curve leading up to the rupture point and 2) the rupture point itself would be of great utility to the materials community. Such a model has the potential to save 1) the time required to finish running the experiment to rupture 2) the associated monetary cost of finishing said experiment. Furthermore, it would be advantageous if the predictive model could give a parametric function modeling strain/time curves for material scientists to investigate the impact of the temperature and stress parameters on the resulting creep behavior. This work introduces a piecewise symbolic regression algorithm to predict the remainder of the strain/time curve. Preliminary results show good model performance.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Shallow Geothermal Resources for Cooling Applications at the University of Hawai'i

Drilling activities account for 30% to 57% of the cost to develop and install a geothermal plant. Therefore, an accurate representation of the cost to drill a well is paramount in techno-economic analysis to determine the feasibility of a geothermal power project. In 2022, the National Renewable Energy Laboratory (NREL) endeavored to revise the U.S. Department of Energy (DOE) GeoVision baseline drilling cost curves due to extensive improvement in drilling rates at the Utah Frontier Observatory Research in Geothermal Energy (FORGE) demonstration site. That effort did not culminate in the recommendation of new curves because the actual project costs did not match the reported performance improvements and were at or above the GeoVision baseline. The need for another iteration of this analysis has arisen from industry record drilling performance reported by recent commercial field-scale and demonstration projects, including Fervo Energy's Cape Station, the Utah FORGE 16B(78)-32 demonstration and the Geysers Power Company's GDC-36 demonstration. Therefore, in this work, we have estimated the resulting industry average rate of penetration (ROP) and bit life and applied these parameters as inputs to the Well Cost Simplified model used in the GeoVision analysis. The resulting revised cost curves show a significant decline from the GeoVision baseline. For vertical wells, the magnitude of cost decline ranges between 12% and 24% while for deviated wells, cost reductions between 18% and 26% are estimated. The revised cost curves are in good agreement with actual cost data and therefore, quantify the economic impact of the utilization of (and advances in) polycrystalline diamond compact (PDC) bit technology and the application of physics-based methodologies that optimize mechanical specific energy.

building cooling↗
DOE OSTI2021

A surrogate-model-based approach for estimating the first and second-order moments of offshore wind power

Power curve, the functional relationship that governs the process of converting a set of weather variables experienced by a wind turbine into electric power, is widely used in the wind industry to estimate power output for planning and operational purposes. Existing methods for power curve estimation have three main limitations: (i) they mostly rely on wind speed as the sole input, thus ignoring the secondary, yet possibly significant effects of other environmental factors, (ii) they largely overlook the complex marine environment in which offshore turbines operate, potentially compromising their value in offshore wind energy applications, and (ii) they solely focus on the first-order properties of wind power, with little (or null) information about the variation around the mean behavior, which is important for ensuring reliable grid integration, asset health monitoring, and energy storage, among others. In light of that, this study investigates the impact of several wind-and wave-related factors on offshore wind power variability, with the ultimate goal of accurately predicting its first two moments. Further, our approach couples OpenFAST—a multi-physics wind turbine simulator—with Gaussian Process (GP) regression to reveal the underlying relationships governing offshore weather-to-power conversion. We first find that a multi-input power curve which captures the combined impact of wind speed, direction, and air density, can provide double-digit improvements, in terms of prediction accuracy, relative to univariate methods which rely on wind speed as the sole explanatory variable (e.g. the standard method of bins). Wave-related variables are found not important for predicting the average power output, but interestingly, appear to be extremely relevant in describing the fluctuation of the offshore power around its mean. Tested on real-world data collected at the New York/New Jersey bight, our proposed multi-input models demonstrate a high explanatory power in predicting the first two moments of offshore wind generation, testifying their potential value to the offshore wind industry.

17 WIND ENERGY↗
DOE OSTI2022

Understanding the E balance for water management in hydroxide exchange membrane fuel cells

As a key challenge for hydroxide exchange membrane fuel cells (HEMFCs), understanding water management deeply is critical for performance and durability improvement. Here, in this work, we show that the balance between water generation and phase-change-induced (PCI) flow is the main factor controlling cell voltage over a wide range of conditions where the cells are vulnerable to severe flooding. The regulation of flooding by heat generation can be reflected by a stable voltage with increase of current density in the polarization curve. This PCI balance voltage (E balance ), which determines the shape of polarization curve, is modeled as a function of cell operating conditions and gas diffusion layer (GDL) properties. Temperature, pressure, and thermal conductivity of GDL were found important for tuning the level of E balance , both in HEMFCs and proton exchange membrane fuel cells. The understanding of E balance will help to generate strategies for resolving flooding in HEMFCs, and it offers a new perspective for polarization curve interpretation.

25 ENERGY STORAGE↗