SEARCH · Engineering Papers

Results for “Cu catalyst”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29

All sources NASA NTRS DOE OSTI

DOE OSTI2020

Dynamic Atom Clusters on AuCu Nanoparticle Surface During CO Oxidation

Supported alloy nanoparticles are prevailing alternative low-cost catalysts for both heterogeneous and electrochemical catalytic processes. Selective interaction of an alloy component with a specific reactant induces a dynamic structural change of alloy nanoparticles under reaction conditions and largely controls their catalytic properties. However, such a multi-component dynamic-interaction-controlled evolution, both structural and chemical, remains far from clear. Herein, by using state-of-the-art environmental TEM, we directly visualize, in-situ at the atomic scale, the evolution of an AuCu alloy nanoparticle supported on CeO2 during CO oxidation. We find that gas molecules can “free” metal atoms on the {001} surface and form highly mobile atom clusters. Remarkably, we discover that CO exposure induces Au segregation and activation on nanoparticle surface, while O2 exposure leads to the segregation and oxidation of Cu on the particle surface. The as-formed Cu2O/AuCu interface may facilitate CO-O interaction corroborated by DFT calculations. These findings provide insights into the atomistic mechanisms on alloy nanoparticles during catalytic CO oxidation reaction, and to a broad scope of rational design of alloy nanoparticle catalysts.

Luo, Langli↗

DOE OSTI2021

High‐efficiency adsorption of various heavy metals by tea residue biochar loaded with nanoscale zero‐valent iron

Abstract Nanoscale zero‐valent iron (nZVI) loaded on tea residue biochar activated with phosphoric acid composites was synthesized. This adsorbent can efficiently adsorb multiple heavy metal ions such as Pb (II), Cr (III), Cu (II), and Ni (II) simultaneously. The adsorption process was found to follow the pseudo‐second‐order kinetic model. Equilibrium adsorption capacities reached 288.18, 162.34, 242.72, and 267.22 mg·g −1 for Pb(II), Cr(III), Cu(II), and Ni(II), respectively. The common interfering ions exhibited lower influence on its adsorption capacity. The adsorption mechanism includes reduction, ion exchange, surface complexation and precipitation. Furthermore, the waste adsorbent was converted into a catalyst in situ, which could catalyze the degradation of Congo red by establishing an electron transfer pathway. This research provides a new concept for the sustainable utilization of industrial tea residues and the harmless treatment of waste nZVI composite adsorbents.

Liu, Shuang↗

DOE OSTI2020

Organic wastewater treatment by a single-atom catalyst and electrolytically produced H2O2

The presence of organic contaminants in wastewater poses considerable risks to the health of both humans and ecosystems. Although advanced oxidation processes that rely on highly reactive radicals to destroy organic contaminants are appealing treatment options, substantial energy and chemical inputs limit their practical applications. Here we demonstrate that Cu single atoms incorporated in graphitic carbon nitride can catalytically activate H 2 O 2 to generate hydroxyl radicals at pH 7.0 without energy input, and show robust stability within a filtration device. We further design an electrolysis reactor for the on-site generation of H 2 O 2 from air, water and renewable energy. Coupling the single-atom catalytic filter and the H 2 O 2 electrolytic generator in tandem delivers a wastewater treatment system. These findings provide a promising path toward reducing the energy and chemical demands of advanced oxidation processes, as well as enabling their implementation in remote areas and isolated communities.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2022

Electrochemical CO2 Reduction over Metal-/Nitrogen-Doped Graphene Single-Atom Catalysts Modeled Using the Grand-Canonical Density Functional Theory

Renewably driven, electrochemical conversion of carbon dioxide into value-added products is expected to be a critical tool in global decarbonization. However, theoretical studies based on the computational hydrogen electrode largely ignore the nonlinear effects of the applied potential on the calculated results, leading to inaccurate predictions of catalytic behavior or mechanistic pathways. Here, we use grand canonical density functional theory (GC-DFT) to model electrochemical CO2 reduction (CO2R) over metal- and nitrogen-doped graphene catalysts (MNCs) and explicitly include the effects of the applied potential. We used GC-DFT to compute the CO2 to CO reaction intermediate energies at -0.3, -0.7, and -1.2 VSHE catalyzed by MNCs each doped with 1 of the 10 3d block metals coordinated by four pyridinic nitrogen atoms. Our results predict that Sc-, Ti-, Co-, Cu-, and Zn-N4Cs effectively catalyze CO2R at moderate to large reducing potentials (-0.7 to -1.2 VSHE). ZnN4C is a particularly promising electrocatalyst for CO2R to CO both at low and moderate applied potentials based on our thermodynamic analysis. Our findings also explain the observed pH independence of CO production over FeN4C and predict that the rate-determining step of CO2R over FeN4C is not *CO2- formation but rather *CO desorption. Additionally, the GC-DFT-computed density of states analysis illustrates how the electronic states of MNCs and adsorbates change non-uniformly with applied potential, resulting in a significantly increased *CO2- stability relative to other intermediates and demonstrating that the formation of the adsorbed *CO2- anion is critical to CO2R activation. This work demonstrates how GC-DFT paves the way for physically realistic and accurate theoretical simulations of reacting electrochemical systems.

CO2 reduction↗

DOE OSTI2022

Facet Impact of CuMn 2 O 4 Spinel Nanocatalysts on Enhancement of the Oxygen Reduction Reaction in Alkaline Media

Surface-structure engineering represents an attractive strategy to optimize the energy conversion performance of nanocatalysts using their deliberately controlled exposed facets. To further exploit the potential of non-PGM-based spinel catalysts for alkaline oxygen reduction reaction (ORR), a cathodic fuel cell reaction, we hereby report a strategy of ORR improvement by controlling the crystallographic facets of ultra-small CuMn 2 O 4 spinel nanocatalysts through a developed colloidal synthesis approach. The synthesis of CuMn 2 O 4 nanocrystals with morphological control relies on the design and selection of the Cu-/Mn-precursors with striking discrepancies in reaction kinetics. Following carbon loading and an annealing post-treatment of the as-synthesized nanocatalysts, the exclusively {101} facet-exposed CuMn 2 O 4 spinel nano-octahedra exhibit improved electrocatalytic activity toward ORR in 1 M KOH, when compared to their spherical counterparts, exhibiting a mass activity (MA) of 37.6 A/g at 0.85 V. After 10,000 cycles of ORR durability test, the nano-octahedra still retain an MA of 24.5 A/g, which is twice that of the CuMn 2 O 4 spinel nanospheres. Structural characterizations after durability testing indicate that the MA decay is likely associated with a decrease in the Mn 3+ fraction and the emergence of Cu + on CuMn 2 O 4 nano-octahedral surfaces. Finally, as a paradigm, this synthesis approach could be extended to other Mn-based spinel nanocatalysts with precise shape control, enabling us to understand and establish the relationship between the surface lattice/valence state and electrocatalytic properties.

36 MATERIALS SCIENCE↗

DOE OSTI2024

Copper‐Catalyzed C(sp 3 )−H α‐Acetylation: Generation of Quaternary Centers

Abstract α‐substituted ketones are important chemical targets as synthetic intermediates as well as functionalities in natural products and pharmaceuticals. We report the α‐acetylation of C(sp 3 )−H substrates R−H with arylmethyl ketones ArC(O)Me to provide α‐alkylated ketones ArC(O)CH 2 R at RT with t BuOO t Bu as oxidant via copper(I) ‐diketiminato catalysts. Proceeding via alkyl radicals R•, this method enables α‐substitution with bulky substituents without competing elimination that occurs in more traditional alkylation reactions between enolates and alkyl electrophiles. DFT studies suggest the intermediacy of copper(II) enolates [Cu II ](CH 2 C(O)Ar) that capture alkyl radicals R• to give R−CH 2 C(O)Ar outcompeting dimerization of the copper(II) enolate to give the 1,4‐diketone ArC(O)CH 2 CH 2 C(O)Ar.

Okoromoba, Otome E.↗

DOE OSTI2024

Copper‐Catalyzed C(sp 3 )−H α‐Acetylation: Generation of Quaternary Centers

Okoromoba, Otome E.↗

DOE OSTI2020

Alternative route for electrochemical ammonia synthesis by reduction of nitrate on copper nanosheets

We propose an efficient and clean avenue for ammonia synthesis, via electroreduction of nitrate which could be obtained from industrial wastewater, domestic sewage, sodium nitrate ore, and nitrification of bacteria and electrochemical oxidation of nitrogen, which addresses the water pollution issues and simultaneously upgrades the nitrate to high-value ammonia. At a low overpotential of -0.15 V versus RHE, Cu nanosheets achieved an ammonia formation rate of 390.1 μg mg -1 Cu h -1 and a Faradaic efficiency of 99.7%, attributed to suppression of the HER activity and apparent improvement of the rate of rate-determining step on Cu (111). Such an ammonia formation rate is more than two orders of magnitude higher than electrochemical nitrogen reduction reaction to ammonia. This work not only develops a powerful strategy to the rational design of robust and efficient catalysts by crystal facet engineering, but also provides an alternative route for electrochemical ammonia synthesis by reduction of nitrate.

36 MATERIALS SCIENCE↗

DOE OSTI2023

Changing Directions: Influence of Ligand Electronics on the Directionality and Kinetics of Photoinduced Charge Transfer in Cu(I)Diimine Complexes

A key challenge to the effective utilization of solar energy is to promote efficient photoinduced charge transfer, specifically avoiding unproductive, circuitous electron-transfer pathways and optimizing the kinetics of charge separation and recombination. We hypothesize that one way to address this challenge is to develop a fundamental understanding of how to initiate and control directional photoinduced charge transfer, particularly for earth-abundant first-row transition-metal coordination complexes, which typically suffer from relatively short excited-state lifetimes. Here, in this paper, we report a series of functionalized heteroleptic copper(I)bis(phenanthroline) complexes, which have allowed us to investigate the directionality of intramolecular photoinduced metal-to-ligand charge transfer (MLCT) as a function of the substituent Hammett parameter. Ultrafast transient absorption suggests a complicated interplay of MLCT localization and solvent interaction with the Cu(II) center of the MLCT state. This work provides a set of design principles for directional charge transfer in earth-abundant complexes and can be used to efficiently design pathways for connecting the molecular modules to catalysts or electrodes and integration into systems for light-driven catalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2025

Rapid Screening of Single-Atom Catalyst Synthesis Conditions Using ToF-SIMS and Facet-Dependent Single-Crystal Substrates

Single-atom catalysts (SACs) offer superior catalytic performance compared to traditional nanoparticle catalysts but are challenging to develop because of the need for extensive optimization and specialized characterization techniques. Here, this study presents a rapid and versatile method for detecting synthesis conditions and elucidating deposition mechanisms of SACs on various substrates. By depositing active elements (Au, Cu, Ni and Rh) on facet-specific single-crystalline substrates (CeO 2 , TiO 2 , MgO and Al 2 O 3 ) and employing time-of-flight secondary ion mass spectroscopy (ToF-SIMS), we assessed facet-dependent deposition behaviors and identified optimal conditions for solution-based SAC synthesis. On CeO 2 and TiO 2 , we confirmed facet-dependent deposition, primarily influenced by oxygen vacancy density and photocatalytic activity, respectively. MgO exhibited the formation of metal oxide/hydroxide clusters for all active elements, and the degree of clustering for Cu and Ni was correlated with the facet hydrolysis susceptibility. Notably, Au and Rh deposition on MgO was facet-independent, attributed to the formation of hydroxide species in solution. Al 2 O 3 , due to its chemical stability and lack of surface defects, did not show active element deposition. This study not only provides a time and cost-efficient method for prescreening SAC synthesis conditions, but it also provides valuable insights into the various deposition mechanisms governing SAC formation on different substrates, paving the way for the rational design of tailored SACs for various catalytic applications.

ToF-SIMS↗

DOE OSTI2024

Hydrogen activation by rhodium under the cover of a copper oxide thin film

Here, the activation of reactants by catalytically active metal sites at metal-oxide interfaces is important for understanding the effect of metal-support interactions on nanoparticle catalysts and for tuning activity and selectivity. Using a combined experimental and theoretical approach, we studied the activation of H 2 and the effect of CO poisoning on isolated Rh atoms completely or partially covered by a copper oxide (Cu 2 O) thin film. Temperature-programmed desorption (TPD) experiments conducted in ultra-high vacuum (UHV) show that neither a partially nor a fully oxidized Cu 2 O layer grown on a Rh/Cu(111) single-atom alloy can activate hydrogen in UHV. However, in situ ambient pressure X-ray photoelectron spectroscopy (AP-XPS) experiments performed at elevated H 2 pressures reveal that Rh significantly accelerates the reduction of these Cu 2 O thin films by hydrogen. Remarkably, the fastest reduction rate is observed for the fully oxidized sample with all Rh sites covered by Cu 2 O. Both TPD and AP-XPS data demonstrate that these covered Rh sites are inaccessible to CO, indicating that Rh under Cu 2 O is active for H 2 dissociation but cannot be poisoned by CO. In contrast, an incomplete oxide film leaves some of the Rh sites exposed and accessible to CO, and hence prone to CO poisoning. Density functional theory calculations demonstrate that unlike many reactions in which hydrogen activation is rate limiting, the rate-determining step in the dissociation of H 2 on thin-film Cu 2 O with Rh underneath is the adsorption of H 2 on the buried Rh site, and once adsorbed, the dissociation of H 2 is barrierless. These calculations also explain why H 2 can only be activated at higher pressures. Together, these results highlight how different the reactivity of atomically dispersed Rh in Cu can be depending on its accessibility through the oxide layer, providing a way to engineer Rh sites that are active for hydrogen activation but resilient to CO poisoning.

36 MATERIALS SCIENCE↗

DOE OSTI2020

Real-time Atomic-scale Visualization of Reversible Copper Surface Activation during the CO Oxidation Reaction

Dynamic structural and chemical information of catalyst surface during a catalytic reaction is critical for deciphering the mechanisms governing the properties of catalysts. Transition-metal based catalysts have emerged as an important alternative to noble metal catalysts, but their catalytic mechanism remains largely elusive, complicated by dynamic structure and valence evolution. Herein, by using in situ aberration-corrected environmental transmission electron microscopy, we capture, for the first time at atomic level, the dynamic evolution of Cu surface during CO oxidation reaction. We discovered that, under reaction condition, the Cu surface is activated, typically involving 2-3 atomic layers with the formation of a reversible meta-stable phase that only exists during catalytic reactions. Further, we reveal the distinctive role of CO and O2 in the surface activation, featuring CO exposure to lead to surface roughening and consequently formation of low-coordinated Cu atoms, while O2 exposure to induce quasi-crystalline CuOx phase. Corrugated by DFT calculations, we rationalize crystalline CuOx reversibly transforms into the amorphous phase, acting as an active species to facilitate the interaction of gas reactants and catalyzing CO oxidation.

Luo, Langli↗

DOE OSTI2021

Role of Hydrogen-bonded Bimolecular Formic Acid–Formate Complexes for Formic Acid Decomposition on Copper: A Combined First-Principles and Microkinetic Modeling Study

Hydrogen bonding interactions alter the nanoscale reaction mechanisms of many chemistries. Yet, it remains unclear how they affect heterogeneously catalyzed decomposition of formic acid (FA), a reaction of intense interest since FA is a promising hydrogen carrier. In this work, we elucidate how hydrogen bonding affects the reaction mechanisms for FA decomposition on Cu(111) by combining first-principles density functional theory calculations to calculate reaction energetics, Latin-hypercube sampling to elucidate stable high-coverage adsorbate configurations, and coverage self-consistent mean-field microkinetic models to predict reaction kinetics. We demonstrate that hydrogen-bonded complexes of FA with formate (bimolecular FA–HCOO complexes) can play a dominant role in FA decomposition. Specifically, our first-principles calculations show that hydrogen bonding of FA with HCOO may stabilize the crucial monodentate HCOO intermediate and the transition states for HCOO decomposition, especially at low coverages. We predict that, depending on the reaction conditions, 40–80% of the reaction flux goes through pathways involving the bimolecular FA–HCOO complexes. Additionally, the active site for FA decomposition on Cu(111) involves a high coverage (~0.4 monolayers (ML)) of these complexes, which unexpectedly stabilize intermediates and transition states via van der Waals interactions. Our work provides molecular insights consistent with previous experimental observations on supported Cu/Al 2 O 3 catalysts. This paves the way toward the development of novel catalysts for FA decomposition as well as for other industrially important chemistries with intermediates capable of hydrogen bonding, such as ammonia electrooxidation and CO 2 hydrogenation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2021

Exploring Trends on Coupling Mechanisms toward C 3 Product Formation in CO (2) R

Challenges in improving catalysts for electrochemical CO 2 reduction require a clear understanding of the reaction mechanisms that lead to products of higher value. Here, we use density functional theory (DFT) to determine the most competitive coupling mechanisms leading to C 3 products on Cu(100) and Cu(511). We exhaustively consider surface coupling pathways between CO* and different C 2 intermediates. On Cu(100), CO* coupling with acetaldehyde was identified as a notable step for C 3 product formation. On Cu(511), local field stabilizations enable an additional coupling step between HCCH* and CO*. This suggests that there is more than one possible pathway toward forming C 3 intermediates. Our simulations show that much like C 2 formation, C 3 formation prefers stepped surfaces with (100)-like sites and that local field stabilization can play a pivotal role in certain coupling steps.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2026

Metal Identity and Coordination Environment Modulate Single-Atom Catalyst Stability During Electrocatalysis

A major hurdle to the implementation of single-atom catalysts (SACs) in real-world systems is a poor understanding of their stability under operating conditions, which is particularly relevant due to the high surface free energy of SACs. Here, we evaluated the aggregation behavior of a suite of SACs varied by metal identity (Fe, Co, Ni, and Cu) during electrocatalytic nitrate reduction using in situ X-ray absorption spectroscopy. The metal center had significant influence on reconstruction, where under identical applied reductive potentials, SACs underwent varying levels of reconstruction, ranging from no discernible change to complete reduction into metallic nanoparticles. Such in situ experiments revealed Cu SACs to be the most susceptible to aggregation, prompting a deeper investigation into how coordination environment (O-, B-, and N-graphene) affected Cu SAC aggregation. We further conducted density functional theory calculations to elucidate the relationship between Cu SAC structure and stability. This work deconvolutes the relationship between SAC architecture and stability, which is essential to evaluate and explain for the realization of SACs for electrocatalysis.

36 MATERIALS SCIENCE↗

DOE OSTI2026

Correlating binding energies of adsorbed CO and H on model surfaces with CO/H 2 selectivity from co-electrolysis of CO 2 and H 2 O over copper–palladium bimetallic catalysts

Binding energies of adsorbed CO and H are key descriptors governing the activity and selectivity of the co-electrolysis of CO 2 and H 2 O to produce syngas with desired CO/H 2 ratios. Palladium hydride (PdH), which forms in situ at negative overpotentials, has been identified as the active Pd phase for CO 2 reduction to syngas. Herein, binding energies of CO and H are determined using temperature programmed desorption (TPD) of CO and H 2 from Pd(111), PdH/Pd(111), and Cu/PdH/Pd(111) under ultra-high vacuum (UHV) conditions. TPD results reveal that desorption of H 2 from subsurface PdH occurs at 460 K, while desorption from surface PdH is more facile at 320 K. CO desorption temperatures shift 20 K lower on PdH/Pd(111) compared to on Pd(111). The presence of 0.7 ML Cu further increases the desorption temperature of H 2 by 30 K while simultaneously reducing CO desorption temperatures by 70 K. Density functional theory (DFT) calculations show that CO adsorption onto Pd sites is hindered on the 0.7 ML Cu/PdH/Pd(111) surface while the kinetic barrier for H 2 desorption is increased. The trends in the binding energies of CO and H on model surfaces are consistent with electrochemical measurements of CuPd powder catalysts in a membrane electrode assembly (MEA), where H 2 evolution is reduced while CO production is enhanced compared to unmodified Pd catalysts. Overall, the results from model surface studies (TPD and DFT) provide a prediction and explanation for the activity and CO/H 2 ratios observed in electrochemical experiments. This study also demonstrates that CuPd is a promising catalyst with reduced Pd-loading to produce CO-rich syngas.

36 MATERIALS SCIENCE↗

DOE OSTI2025

Low-Temperature Direct Oxidation of Propane to Propylene Oxide Using Supported Subnanometer Cu Clusters

Propylene oxide, a key commodity of the chemical industry for a wide range of consumer products, is synthesized through sequential propane dehydrogenation and epoxidation reactions. However, the lack of a direct catalytic route from propane to propylene oxide reduces efficiency and represents a major challenge for catalysis science. Herein, we report the discovery of a highly active and selective catalyst, made of alumina-supported subnanometer copper clusters, which can directly convert propane to propylene oxide at temperatures as low as 150 °C. Moreover, at higher temperatures, on the same catalysts, the selectivity is switched to propylene. Accompanying theoretical calculations indicate that partially oxidized and/or hydroxylated clusters have low activation energies for both propane dehydrogenation and propylene epoxidation pathways, enabling direct conversion with very high selectivity for propylene oxide. The discovery of a low-temperature catalyst that can convert propane directly to propylene oxide provides an important opportunity for the development of energy-efficient and economic catalysts for this industrially critical process. Similarly, when operating at higher temperatures, these catalysts are posed as potent oxidative dehydrogenation catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2022

Highly selective and productive reduction of carbon dioxide to multicarbon products via in situ CO management using segmented tandem electrodes

Electrochemical CO 2 reduction provides a promising route to the sustainable generation of valuable chemicals and fuels. Tandem catalysts enable sequential CO 2 -to-CO and CO-to-multicarbon (C 2+ ) product conversions on complementary active sites, to produce high C 2+ Faradaic efficiency (FE). Unfortunately, previous tandem catalysts exhibit poor management of CO intermediates, which diminishes C 2+ FE. Here, we design segmented gas-diffusion electrodes (s-GDEs) in which a CO-selective catalyst layer (CL) segment at the inlet prolongs CO residence time in the subsequent C 2+ -selective segment, enhancing conversion. This phenomenon enables increases in both the CO utilization and C 2+ current density for a Cu/Ag s-GDE compared to pure Cu, by increasing the *CO coverage within the Cu CL. Lastly, we develop a Cu/Fe-N-C s-GDE with 90% C 2+ FE at C 2+ partial current density (j C2+ ) exceeding 1 A cm -2 . These results prove the importance of transport and establish design principles to improve C 2+ FE and j C2+ in tandem CO 2 reduction.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗