Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Coefficient”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29

Electron-Transfer Coefficients in Weakly Ionized Plasma with Dust Particles

Based on a numerical solution of the Boltzmann equation and the equation for charging monodisperse macroparticles, the influence of dust on the electron-transfer coefficients is investigated in a weakly ionized plasma within the range of the reduced-field values E/N = 5·10{sup −18}–1·10{sup −15} V·cm2 and dust parameters nd a{sup 2} = 10{sup −4}–5·10{sup −3} cm{sup −1}. It is shown that in the region of small values of E/N the diffusion and mobility coefficients in the argon plasma increase upon addition of dust, given the invariable reduced-field value. The effect is accounted for by the presence of a Ramsauer minimum in the transport cross-section of particle collisions. For the discharge in helium, the deviations in the transfer coefficients after the introduction of dust are less pronounced. The presence of dust changes the structure of the electron energy loss during collisions – the fraction of inelastic loss becomes essential in the entire range of the E/N values.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Measurement of the Activity Coefficients of P and Mn in Carbon-Saturated Fe-P-Mn-C Alloy

The thermodynamic properties of the Fe-P-Mn-C(sat.) alloy, which is obtained following the reduction of steelmaking slag or manganese ore, are not adequately clarified. Thus, the current study involved measuring the activity coefficients of both Mn and P in the alloy system. The Fe-P-Mn-C (sat.) alloy (2.5 to 15.2 mass pct of P and 2.9 to 12.8 mass pct of Mn) was equilibrated with Ag in a graphite crucible at 1673 K, and thus several thermodynamic data were obtained as follows: Interaction parameters: ε{sub Mn (C sat.)}{sup P}=− 4.72±0.27,(X{sub Mn}<0.06, X{sub P}<0.25, 1673K), ε{sub C (C sat.)}{sup P}=6.09 ± 0.15, (X{sub Mn}<0.06, X{sub P}<0.25, 1673K). C solubility: X{sub C[in Fe-P-Mn-C(sat.)]}=0.19e{sup −(6.09X{sub P}− 0.47X{sub M}{sub n})}. Activity coefficient: lnγ{sub Mn [in Fe-P-Mn-C(sat.)]}=− 4.72X{sub P}−0.47X{sub C}−0.87, lnγ{sub P [in Fe-P-Mn-C(sat.)]}{sup H}−lnγ{sub P [in Fe-P-C]}{sup H}=ε{sub P}{sup Mn}X{sub Mn}=−4.72X{sub Mn}, and lnγ{sub P [in Fe-P-Mn-C (sat.)]}{sup H}=−4.72X{sub Mn}+4.26X{sub P}+6.09X{sub C}. In addition, a comparison with the results obtained by previous studies on the selective reduction of steelmaking slag indicated that the activity coefficients of P and Mn obtained in the study were applicable.

36 MATERIALS SCIENCE↗

Radiative recombination rate coefficients for highly-charged tungsten ions

Partial and total radiative recombination rate coefficients are presented for highly-charged ions of tungsten with closed shells, W{sup 28+}, W{sup 38+}, W{sup 46+}, W{sup 56+}, W{sup 64+}, W{sup 70+}, and W{sup 72+}, as well as for the H-like ion W{sup 73+} and the bare nucleus W{sup 74+}. The temperature range 10{sup 3}-10{sup 10}K is considered. Calculations have been performed in the framework of the fully relativistic Dirac-Fock treatment of photoionization and radiative recombination processes taking into account all significant multipoles of the radiation field. We assess the influence of multipole effects on recombination rate coefficients as compared with the commonly used dipole approximation. For the first time, we show that the relativistic Maxwell-Boltzmann distribution of continuum electrons should be used at high temperature. This decreases the rate coefficient significantly compared to the nonrelativistic distribution.

74 ATOMIC AND MOLECULAR PHYSICS↗

N-fold Darboux transformation and double-Wronskian-typed solitonic structures for a variable-coefficient modified Kortweg-de Vries equation

Under investigation in this paper is a variable-coefficient modified Kortweg-de Vries (vc-mKdV) model describing certain situations from the fluid mechanics, ocean dynamics and plasma physics. N-fold Darboux transformation (DT) of a variable-coefficient Ablowitz-Kaup-Newell-Segur spectral problem is constructed via a gauge transformation. Multi-solitonic solutions in terms of the double Wronskian for the vc-mKdV model are derived by the reduction of the N-fold DT. Three types of the solitonic interactions are discussed through figures: (1) Overtaking collision; (2) Head-on collision; (3) Parallel solitons. Nonlinear, dispersive and dissipative terms have the effects on the velocities of the solitonic waves while the amplitudes of the waves depend on the perturbation term. - Highlights: Black-Right-Pointing-Pointer N-fold DT is firstly applied to a vc-AKNS spectral problem. Black-Right-Pointing-Pointer Seeking a double Wronskian solution is changed into solving two systems. Black-Right-Pointing-Pointer Effects of the variable coefficients on the multi-solitonic waves are discussed in detail. Black-Right-Pointing-Pointer This work solves the problem from Yi Zhang [Ann. Phys. 323 (2008) 3059].

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Revisiting Maxwell’s accommodation coefficient: A study of nitrogen flow in a silica microtube across all flow regimes

Gas flows have been studied quantitatively for more than a hundred years and have relevance in modern fields such as the control of gas inputs to processes, the measurement of leak rates and the separation of gaseous species. Cha and McCoy have derived a convenient formula for the flow of an ideal gas applicable across a wide range of Knudsen numbers (Kn) that approaches the Navier–Stokes equations at small Kn and the Smoluchowski extension of the Knudsen flow equation at large Kn. Smoluchowski’s result relies on the Maxwell definition of the tangential momentum accommodation coefficient α, recently challenged by Arya et al. We measure the flow rate of nitrogen gas in a smooth walled silica tube across a wide range of Knudsen numbers from 0.0048 to 12.4583. We find that the nitrogen flow obeys the Cha and McCoy equation with a large value of α, unlike carbon nanotubes which show flows consistent with a small value of α. Silica capillaries are therefore not atomically smooth. The flow at small Kn has α=0.91 and at large Kn has α close to one, consistent with the redefinition of accommodation coefficient by Arya et al., which also resolves a problem in the literature where there are many observations of α of less than one at small Kn and many equal to one at large Kn. Silica capillaries are an excellent choice for an accurate flow control system. - Highlights: • First experimental study on flow rate across all flow regimes in a well-defined microtube. • Extend Cha and McCoy theory for molecular flow regime. • Demonstrate the Maxwell accommodation coefficient is different in the slip and molecular flow regimes.

42 ENGINEERING↗

Varying coefficient function models to explore interactions between maternal nutritional status and prenatal methylmercury toxicity in the Seychelles Child Development Nutrition Study

Maternal consumption of fish during the gestational period exposes the fetus to both nutrients, especially the long-chain polyunsaturated fatty acids (LCPUFAs), believed to be beneficial for fetal brain development, as well as to the neurotoxicant methylmercury (MeHg). We recently reported that nutrients present in fish may modify MeHg neurotoxicity. Understanding the apparent interaction of MeHg exposure and nutrients present in fish is complicated by the limitations of modeling methods. In this study we fit varying coefficient function models to data from the Seychelles Child Development Nutrition Study (SCDNS) cohort to assess the association of dietary nutrients and children's development. This cohort of mother-child pairs in the Republic of Seychelles had fish consumption averaging 9 meals per week. Maternal nutritional status was assessed for five different nutritional components known to be present in fish (n-3 LCPUFA, n-6 LCPUFA, iron status, iodine status, and choline) and associated with children's neurological development. We also included prenatal MeHg exposure (measured in maternal hair). We examined two child neurodevelopmental outcomes (Bayley Scales Infant Development-II (BSID-II) Mental Developmental Index (MDI) and Psychomotor Developmental Index (PDI)), each administered at 9 and at 30 months. The varying coefficient models allow the possible interactions between each nutritional component and MeHg to be modeled as a smoothly varying function of MeHg as an effect modifier. Iron, iodine, choline, and n-6 LCPUFA had little or no observable modulation at different MeHg exposures. In contrast the n-3 LCPUFA docosahexaenoic acid (DHA) had beneficial effects on the BSID-II PDI that were reduced or absent at higher MeHg exposures. This study presents a useful modeling method that can be brought to bear on questions involving interactions between covariates, and illustrates the continuing importance of viewing fish consumption during pregnancy as a case of multiple exposures to nutrients and to MeHg. The results encourage more emphasis on a holistic view of the risks and benefits of fish consumption as it relates to infant development. - Research highlights: {yields}Varying coefficient models are tools for examining interactions in exposure settings Associations between MeHg and fish nutrients and developmental outcomes were examined. {yields} Interactions between MeHg exposure and fish-derived nutrients were modeled using VC. {yields} Models show beneficial association of DHA with outcomes were reduced as MeHg increases. {yields} VC models show other measured nutrients unmodulated by increasing MeHg exposure.

60 APPLIED LIFE SCIENCES↗

Heat transfer coefficients of shell and coiled tube heat exchangers

In the present study, the heat transfer coefficients of shell and helically coiled tube heat exchangers were investigated experimentally. Three heat exchangers with different coil pitches were selected as test section for both parallel-flow and counter-flow configurations. All the required parameters like inlet and outlet temperatures of tube-side and shell-side fluids, flow rate of fluids, etc. were measured using appropriate instruments. Totally, 75 test runs were performed from which the tube-side and shell-side heat transfer coefficients were calculated. Empirical correlations were proposed for shell-side and tube-side. The calculated heat transfer coefficients of tube-side were also compared to the existing correlations for other boundary conditions and a reasonable agreement was observed. (author)

42 ENGINEERING↗

Comparative Evaluation of Control-Oriented Heavy Duty Vehicle Air Drag Coefficient Models

Heavy-duty vehicles (HDVs) are a significant source of fuel consumption and greenhouse gas emissions, prompting solutions such as HDV platooning to mitigate these negative impacts through air drag reduction. The intervehicle distance in an HDV platoon needs to be carefully selected, such that the platoon-level energy efficiency and safety considerations can be well balanced. Underlying this problem lies in accurately modeling the relationship between HDV air drag coefficient and intervehicle distance. Through comprehensive evaluation and comparison, we analyze five control-oriented HDV air drag coefficient models, including the polynomial model, rational polynomial model, rational model, semi-quadratic model, and ridge model. Leveraging Scipy Curve-Fit toolbox and our previously compiled air drag coefficient datasets, we optimally identify the parameters inside each model. The calibrated models are then thoroughly evaluated via five complementary metrics. The comparison results reveal that the semi-quadratic model has the highest overall performance, while the widely adopted rational model only exhibits suboptimal performance.

Best, Micah↗

Effects of the distribution and evolution of the coefficient of friction along a fault on the assessment of the seismic activity associated with a hypothetical industrial-scale geologic CO 2 sequestration operation

Carbon capture and storage (CCS) in geological formations is considered as a promising option that could limit CO 2 emissions from human activities into the atmosphere. However, there is a risk that pressure buildup inside the storage formation can induce slip along preexisting faults and create seismic event felt by the population. To prevent this to happen a geomechanical fault stability analysis should be performed, considering uncertainties of input parameters. In this paper, we investigate how the distribution of the coefficient of friction and the applied frictional law could influence the assessment of fault stability and the characteristics of potential injection-induced seismic events. Our modelling study is based on a hypothetical industrial-scale carbon sequestration project located in the Southern San Joaquin Basin in California, USA, where the stability on a major (25 km long) fault that bounds the sequestration site is assessed during 50 years of CO 2 injection. We conduct nine simulations in which the distributions of the coefficients of static and dynamic friction are changed to simulate a hardening and softening phase before and during rupture. Here, our main findings are: (i) variations in friction along the fault have an important effect on the predicted seismic activity, with maximum magnitude ranging from 1.88 to 5.88 and number of seismic events ranging from 338 to 3272; (ii) the extreme values of the coefficient of friction (lowest and highest) present along the rupture area control how much stress is accumulated before rupture; and (iii) an argillaceous caprock can prevent the development of large magnitude seismic events but favor the occurrence of a large number of smaller events.

58 GEOSCIENCES↗

Evolution of permeability and Biot coefficient at high mean stresses in high porosity sandstone

A series of constant mean stress (CMS) and constant shear stress (CSS) tests were performed to investigate the evolution of permeability and Biot coefficient at high mean stresses in a high porosity reservoir analog (Castlegate sandstone). Permeability decreases as expected with increasing mean stress, from about 20 Darcy at the beginning of the tests to between 1.5 and 0.3 Darcy at the end of the tests (mean stresses up to 275 MPa). The application of shear stress causes permeability to drop below that of a hydrostatic test at the same mean stress. Results show a nearly constant rate decrease in the Biot coefficient as the mean stress increases during hydrostatic loading, and as the shear stress increases during CMS loading. In conclusion, CSS tests show a stabilization of the Biot coefficient after the application of shear stress.

58 GEOSCIENCES↗

Identification of Bayesian posteriors for coefficients of chaos expansions

This article is concerned with the identification of probabilistic characterizations of random variables and fields from experimental data. The data used for the identification consist of measurements of several realizations of the uncertain quantities that must be characterized. The random variables and fields are approximated by a polynomial chaos expansion, and the coefficients of this expansion are viewed as unknown parameters to be identified. It is shown how the Bayesian paradigm can be applied to formulate and solve the inverse problem. The estimated polynomial chaos coefficients are hereby themselves characterized as random variables whose probability density function is the Bayesian posterior. This allows to quantify the impact of missing experimental information on the accuracy of the identified coefficients, as well as on subsequent predictions. An illustration in stochastic aeroelastic stability analysis is provided to demonstrate the proposed methodology.

97 MATHEMATICS AND COMPUTING↗

The mimetic finite difference method for elliptic and parabolic problems with a staggered discretization of diffusion coefficient

Numerical schemes for nonlinear parabolic equations based on the harmonic averaging of cell-centered diffusion coefficients break down when some of these coefficients go to zero or their ratio grows. To tackle this problem, we propose new mimetic finite difference schemes that use a staggered discretization of the diffusion coefficient. The primary mimetic operator approximates div (k•); the derived (dual) mimetic operator approximates - ∇(•). The new mimetic schemes preserve symmetry and positive-definiteness of the continuum problem which allows us to use algebraic solvers with optimal complexity. We perform detailed numerical analysis of the new schemes for linear elliptic problems and a specially designed linear parabolic problem that has solution dynamics typical for nonlinear problems. We also show that the new schemes are competitive with the state-of-the-art schemes for steady-state problems but provide much more accurate solution dynamics for the transient problem.

97 MATHEMATICS AND COMPUTING↗

Group Projected subspace pursuit for IDENTification of variable coefficient differential equations (GP-IDENT)

We propose an effective and robust algorithm for identifying partial differential equations (PDEs) with space-time varying coefficients from the noisy observation of a single solution trajectory. Identifying unknown differential equations from noisy data is a difficult task, and it is even more challenging with space and time varying coefficients in the PDE. The proposed algorithm, GP-IDENT, has three ingredients: (i) we use B-spline bases to express the unknown space and time varying coefficients, (ii) we propose Group Projected Subspace Pursuit (GPSP) to find a sequence of candidate PDEs with various levels of complexity, and (iii) we propose a new criterion for model selection using the Reduction in Residual (RR) to choose an optimal one among a pool of candidates. The new GPSP considers group projected subspaces which is more robust than existing methods in distinguishing correlated group features. We test GP-IDENT on a variety of PDEs and PDE systems, and compare it with the state-of-the-art parametric PDE identification algorithms under different settings to illustrate its outstanding performance. Furthermore, our experiments show that GP-IDENT is effective in identifying the correct terms from a large dictionary, and our model selection scheme is robust to noise.

Data-driven method↗

The Coefficients of Thermal Expansion of Boron Arsenide (B12As2) Between 25 C and 850 C

The semiconductor boron arsenide has a high 10B density, a wide bandgap, and a high melting temperature, all of which make it an interesting candidate for high-temperature electronic devices and radiation detectors. The present investigation was undertaken to determine the coefficients of thermal expansion for boron arsenide. B12As2 powder was synthesized from boron and arsenic heated in a sealed quartz ampoule at 1100 C for 72 hrs with excess boron. Using high temperature X-ray diffraction (HTXRD) between 25 C and 850 C, the average lattice coefficients of thermal expansion were measured perpendicular and parallel to the <111> axis in the rhombohedral setting (equivalent to the a and c axes in the hexagonal setting): 4.9x10-6 K-1 and 5.3x10-6 K-1, respectively. The average unit cell volumetric coefficient of thermal expansion was determined to be 1.5x10-5 K-1.

B6As↗

Seebeck coefficient and thermal conductivity of doped armchair graphene nanoribbon in the presence of magnetic field

Highlights: • Theoretical calculation of Seebeck coefficient and thermal conductivity of electrons on grapheme nanoribbon. • The investigation of the effect of magnetic field and ribbon width on temperature dependence of thermoelectric properties of nanoribbon. • The study of thermopower as a function of magnetic field and temperature. - Abstract: We address the thermal conductivity and Seebeck coefficient of armchair graphene nanoribbon within tight binding model Hamiltonian in the presence of magnetic field. The possible effects of ribbon width, magnetic field chemical potential on thermoelectric properties are investigated. Green's function approach has been employed in order to calculate transport coefficients of the system. We have also found the temperature dependence of the thermal conductivity for various ribbon widths and chemical potentials. Our results show a peak appears in temperature dependence of thermal conductivity of insulator nanoribbon for low magnetic fields. Upon increasing magnetic field, thermal conductivity shows a monotonic decreasing behavior and peak disappears. Our results show the increase of chemical potential causes to decreasing behavior for thermal conductivity. Moreover we study the effects of magnetic field on temperature behavior of thermopower of insulator graphene nanoribbon in details.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

The calculation of light element impurity (α, n) yield curves in a PuO 2 matrix and associated specific yield coefficients: Influence of the reaction cross sections

Most of the Pu separated from irradiated commercial nuclear fuel is stored as PuO 2 . The primary quantitative nondestructive measurement technique used to verify the amount of Pu in storage containers is passive neutron correlation counting. An important physical property of the oxide material is the ratio, α, of the rate of (α, n) neutrons produced inside the item to the rate of neutrons produced by spontaneous fission. This ratio influences the precision of the correlated counting method and affects the interpretation of the data because of how it changes both the primary total neutron production rate and the rate of induced fission events taking place inside the item. In addition to the main O(α, n) contribution, additional contributions come from α-particle interactions with light element impurities that are inevitably present. In this work, we calculate specific (α, n) yield coefficients, expressed in units of neutrons per second per gram of α-emitting nuclide per part per million by mass of the specified impurity element distributed in a pure PuO 2 matrix, for some key α-emitting actinides commonly present in reprocessed Pu ( 238–242 Pu+ 241 Am). These coefficients are directly applicable to nuclear safeguards verification work in which the α ratio is often calculated from the Pu-isotopic composition and chemical information obtained by other means. Further, they also provide a convenient up-to-date reference set against which values generated by other methods can be compared. Results are presented for impurities with atomic number from 3 to 17 inclusive, plus K and Fe. In most cases, these coefficients are not expected to change by more than 5%–10% at any time in the future. However, as new data become available, changes as large as 20% may be needed for some targets (e.g., F). The present yield calculations are limited by the general shortage of quality experimental total (α, n) reaction cross section data, which, together with unexplained variation between determinations, means that an objective and coherent evaluation is not possible. The situation is even less satisfactory for the partial differential cross section needed to calculate neutron spectra.

(𝛼, n) reactions↗

Machine Learning Predictions of Simulated Self-Diffusion Coefficients for Bulk and Confined Pure Liquids

Diffusion properties of bulk fluids have been predicted using empirical expressions and machine learning (ML) models, suggesting that predictions of diffusion also should be possible for fluids in confined environments. The ability to quickly and accurately predict diffusion in porous materials would enable new discoveries and spur development in relevant technologies such as separations, catalysis, batteries, and subsurface applications. Here in this work, we apply artificial neural network (ANN) models to predict the simulated self-diffusion coefficients of real liquids in both bulk and pore environments. The training data sets were generated from molecular dynamics (MD) simulations of Lennard-Jones particles representing a diverse set of 14 molecules ranging from ammonia to dodecane over a range of liquid pressures and temperatures. Planar, cylindrical, and hexagonal pore models consisted of walls composed of carbon atoms. Our simple model for these liquids was primarily used to generate ANN training data, but the simulated self-diffusion coefficients of bulk liquids show excellent agreement with experimental diffusion coefficients. ANN models based on simple descriptors accurately reproduced the MD diffusion data for both bulk and confined liquids, including the trend of increased mobility in large pores relative to the corresponding bulk liquid.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The Role of Spin–Orbit Coupling in the Linear Absorption Spectrum and Intersystem Crossing Rate Coefficients of Ruthenium Polypyridyl Dyes

The successful use of molecular dyes for solar energy conversion requires efficient charge injection, which in turn requires the formation of states with sufficiently long lifetimes (e.g., triplets). The molecular structure elements that confer this property can be found empirically, however computational predictions using ab initio electronic structure methods are invaluable to identify structure-property relations for dye sensitizers. The primary challenge for simulations to elucidate the electronic and nuclear origins of these properties is a spin-orbit interaction which drives transitions between electronic states. Here, in this work, we present a computational analysis of the spin-orbit corrected linear absorption cross sections and intersystem crossing rate coefficients for a derivative set of phosphonated tris(2,2'-bipyridine)ruthenium(2+) dye molecules. After sampling the ground state vibrational distributions, the predicted linear absorption cross sections indicate that the mixture between singlet and triplet states plays a crucial role in defining the line shape of the metal-to-ligand charge transfer bands in these derivatives. Additionally, an analysis of the intersystem crossing rate coefficients suggests that transitions from the singlet into the triplet manifolds are ultrafast with rate coefficients on the order of 10 13 s -1 for each dye molecule.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗