Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “COMPRESSION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29

Macro- and micro-compression testing of shales

Here, macro- and micro-geomechanical properties of shales were investigated at millimeter- and micrometer-scale using an example of the Woodford Shale. Geomechanical properties, such as uniaxial (unconfined) compressive strength and Young's modulus, were quantified at the millimeter-scale and compared with results from micro-compression testing experiments of FIB-SEM-nanofabricated micro-pillars. Size-scale and compositional/structural heterogeneity effect on elasto-plastic deformation and failure behavior of shales were investigated. Also, relationship between elemental/mineral composition and unconfined compressive strength and Young's modulus, at a micrometer-scale, was discussed. It was shown that geomechanical properties of shales are scale-dependent and are strongly affected by compositional/structural anisotropy. In particular, micro-compression testing experiments showed non-uniformly distributed compressive strength and Young's modulus within the investigated Woodford Shale rock samples. It was demonstrated, that geomechanical properties of shales, investigated at the micrometer-scale, tend to be affected by different minerals and/or pores, while the same properties, investigated at the millimeter-scale, are governed by different micro-facies (and/or micro-fractures) present within the rock. This shows that geomechanical properties of shales can be dramatically different depending on the scale of investigation and compositional/structural heterogeneity of these rocks, and therefore are not easily transferable across the scales.

58 GEOSCIENCES↗

Behavior of sodium borosilicate glasses under compression using molecular dynamics

We have performed classical molecular dynamics simulations in order to study the changes under compression in the local and medium range structural properties of three sodium borosilicate glasses with varying sodium content. These glasses have been isostatically compressed up to 20 GPa and then decompressed in order to analyze the different mechanisms that affect densification, alongside with the permanent modifications of the structure after a full compression/decompression cycle. The results show that the atomic packing is the prominent characteristic that governs the amount of densification in the glass, as well as the setup of the permanent densification. During compression, the bulk modulus increases linearly up to approximately 15 GPa and more rapidly for higher pressures, a behavior which is reflected on the rate of increase of the average coordination for B and Na. Radial distribution functions at different pressures during the cycle help to quantify the amount of distortions in the elementary structural units, with a pronounced shortening of the Na–Na and Na–O bond lengths during compression. A subsequent decomposition of the glassy matrix into elementary Voronoi volumes verifies the high compressibility of Na-rich regions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Massive compression for high data rate macromolecular crystallography (HDRMX): impact on diffraction data and subsequent structural analysis

New higher-count-rate, integrating, large-area X-ray detectors with framing rates as high as 17400 images per second are beginning to be available. These will soon be used for specialized macromolecular crystallography experiments but will require optimal lossy compression algorithms to enable systems to keep up with data throughput. Some information may be lost. Can we minimize this loss with acceptable impact on structural information? To explore this question, we have considered several approaches: summing short sequences of images, binning to create the effect of larger pixels, use of JPEG-2000 lossy wavelet-based compression, and use of Hcompress, which is a Haar-wavelet-based lossy compression borrowed from astronomy. We also explore the effect of the combination of summing, binning, and Hcompress or JPEG-2000. In each of these last two methods one can specify approximately how much one wants the result to be compressed from the starting file size. These provide particularly effective lossy compressions that retain essential information for structure solution from Bragg reflections.

47 OTHER INSTRUMENTATION↗

Progressive Tree-Based Compression of Large-Scale Particle Data

Scientific simulations and observations using particles have been creating large datasets that require effective and efficient data reduction to store, transfer, and analyze. However, current approaches either compress only small data well while being inefficient for large data, or handle large data but with insufficient compression. Toward effective and scalable compression/decompression of particle positions, we introduce new kinds of particle hierarchies and corresponding traversal orders that quickly reduce reconstruction error while being fast and low in memory footprint. Our solution to compression of large-scale particle data is a flexible block-based hierarchy that supports progressive, random-access, and error-driven decoding, where error estimation heuristics can be supplied by the user. For low-level node encoding, we introduce new schemes that effectively compress both uniform and densely structured particle distributions. Our proposed methods thus target all three phases of a tree-based particle compression pipeline, namely tree construction, tree traversal, and node encoding. In conclusion, the improved efficacy and flexibility of these methods over existing compressors are demonstrated through extensive experimentation, using a wide range of scientific particle datasets.

97 MATHEMATICS AND COMPUTING↗

Preliminary Study on Two Possible Bunch Compression Schemes at NLCTA

In this paper, two possible bunch compression configurations are proposed and evaluated by numerical simulation in the Next Linear Collider Test Accelerator (NLCTA) at SLAC. A bunch compression ratio up to 20 could be achieved under a perfect condition, without consideration for the timing jitter and other error sources. The NLCTA is a test accelerator built at SLAC, which is approximately 42 meters long and composed of X-band acceleration structures. The main aim of building NLCTA is to develop and demonstrate the X-band rf acceleration technologies for the next generation linear collider, with a relatively high acceleration gradient between 50 MV/m and 100 MV/m. The current operation configuration of NLCTA features a thermionic-cathode electron gun at its starting point which generates an electron beam with an energy of 5 MeV. This is followed by a roughly 1.5 meter long X-band acceleration structure which boosts the electron beam energy to 60 MeV. Then there is a four-dipole magnetic chicane which is 6 meters long and provides a first order longitudinal dispersion of R{sub 56} = -73mm. Next the electron beam passes by several matching quadrupoles and can be accelerated further to 120 MeV through another one-meter-long X-band acceleration structure. After that, there are three small chicanes downstream, with a total first order longitudinal dispersion of R{sub 56} = -10mm. A sketch of the main components of NLCTA is shown in Figure 1, where the total length of this accelerator is 45 meters. Free Electron Lasers (FELs), proposed by J. Madey and demonstrated for the first time at Stanford University in 1970s [2] [3], use the lasing of relativistic electron beam traveling through a magnetic undulator, which can reach high power and can be widely tunable in wavelength. Linac based FEL source can provide sufficient brightness, and a short X-ray wavelength down to angstrom scale, which promises in supporting wide range of research experiments. In order to have an electron beam lasing coherently in an undulator, one needs a very bright beam in all three dimensions. In other words, one needs an electron beam with very short bunch length (high intensity), very small transverse emittance and very small energy spread. Most FELs currently being operated, commissioned, constructed or proposed are based on RF acceleration in a frequency range from L-band ( 1 GHz) to C-band ( 6 GHz). As RF frequency goes higher, wake fields effects tend to be much stronger and jitter tolerances are tighter. To demonstrate that X-band acceleration structures can be applied in constructing an FEL, one could perform bunch compression experiments at NLCTA as a first step, and investigate tolerances on timing jitter, misalignments etc.. Another important point is to evaluate the transverse emittance growth in this bunch compression process. In the following sections, two possible bunch compression schemes are proposed to be tested at NLCTA. Elegant [4] 3-D simulation is performed to evaluate these two schemes, with wake fields, space charge and coherent synchrotron radiation (CSR) effects included. One million macro particles are adopted in the numerical simulations. The simulation starts with an electron beam of 20 pC at a beam energy of 5 MeV. The initial RMS bunch length is taken as 0.5 ps at such a low bunch charge, and the RMS energy spread is 5 x 10{sup -3}. The normalized transverse emittance is 1 mm.mrad.

43 PARTICLE ACCELERATORS↗

Effect of Compressibility on Hyperbolicity and Choke Flow Criterion of the Two-phase Two-fluid Model

The standard two-phase two-fluid model lacks hyperbolicity which results in oscillations in the numerical solutions. For the incompressible two-phase flows an exact correction term can be derived which when added to the momentum equations makes the model hyperbolic. No such straightforward approach exists for the similar compressible flows. In the current work, the effect of the compressibility on the characteristic equation is analyzed. It is shown that the hyperbolicity of the system depends only on the slip velocity and not on the phasic velocities, independently. Moreover, a slip Mach number is defined and a non-dimensional characteristic equation is derived. It is shown that for the small values of slip Mach number the effect of the compressibility on the hyperbolicity can be ignored. To verify the above analysis, the characteristic equation for the two-phase compressible flows is numerically solved and results compared with the values obtained with the analytical solution for incompressible flows. Numerical solution of the two-phase two-fluid model for the benchmark problem is used to further verify the abovementioned analysis. Furthermore, the eigenvalues of the characteristic equation are obtained as a power series expansion about the point where the slip Mach number is zero. These eigenvalues are used to develop a choking criterion for the compressible two-phase flows.

97 MATHEMATICS AND COMPUTING↗

Physics-Driven Convolutional Autoencoder Approach for CFD Data Compressions: Preprint

With the growing size and complexity of turbulent flow models, data compression approaches are of the utmost importance to analyze, visualize, or restart the simulations. Recently, in-situ autoencoder-based compression approaches have been proposed and shown to be effective at producing reduced representations of turbulent flow data. However, these approaches focus solely on training the model using point-wise sample reconstruction losses that do not take advantage of the physical properties of turbulent flows. In this paper, we show that training autoencoders with additional physics-informed regularizations, e.g., enforcing incompressibility and preserving enstrophy, improves the compression model in three ways: (i) the compressed data better conform to known physics for homogeneous isotropic turbulence without negatively impacting point-wise reconstruction quality, (ii) inspection of the gradients of the trained model uncovers changes to the learned compression mapping that can facilitate the use of explainability techniques, and (iii) as a performance byproduct, training losses are shown to converge up to 12x faster than the baseline model.

auto-encoders↗

Vulnerability of the Superficial Zone of Immature Articular Cartilage to Compressive Injury

The zonal composition and functioning of adult articular cartilage causes depth-dependent responses to compressive injury. In immature cartilage, shear and compressive moduli as well as collagen and sulfated glycosaminoglycan (sGAG) content also vary with depth. However, there is little understanding of the depth-dependent damage caused by injury. Since injury to immature knee joints most often causes articular cartilage lesions, this study was undertaken to characterize the zonal dependence of biomechanical, biochemical, and matrix-associated changes caused by compressive injury. Disks from the superficial and deeper zones of bovine calves were biomechanically characterized. Injury to the disks was achieved by applying a final strain of 50% compression at 100%/second, followed by biomechanical recharacterization. Tissue compaction upon injury as well as sGAG density, sGAG loss, and biosynthesis were measured. Collagen fiber orientation and matrix damage were assessed using histology, diffraction-enhanced x-ray imaging, and texture analysis. Injured superficial zone disks showed surface disruption, tissue compaction by 20.3 {+-} 4.3% (mean {+-} SEM), and immediate biomechanical impairment that was revealed by a mean {+-} SEM decrease in dynamic stiffness to 7.1 {+-} 3.3% of the value before injury and equilibrium moduli that were below the level of detection. Tissue areas that appeared intact on histology showed clear textural alterations. Injured deeper zone disks showed collagen crimping but remained undamaged and biomechanically intact. Superficial zone disks did not lose sGAG immediately after injury, but lost 17.8 {+-} 1.4% of sGAG after 48 hours; deeper zone disks lost only 2.8 {+-} 0.3% of sGAG content. Biomechanical impairment was associated primarily with structural damage. The soft superficial zone of immature cartilage is vulnerable to compressive injury, causing superficial matrix disruption, extensive compaction, and textural alteration, which results in immediate loss of biomechanical function. In conjunction with delayed superficial sGAG loss, these changes may predispose the articular surface to further softening and tissue damage, thus increasing the risk of development of secondary osteoarthritis.

59 BASIC BIOLOGICAL SCIENCES↗

Cancellation of Raman self-frequency shift for compression of optical pulses

We study to which extent a fiber soliton can be manipulated by a specially chosen continuous pump wave. A group velocity matched pump scatters at the soliton, which is compressed due to the energy/momentum transfer. As the pump scattering is very sensitive to the velocity matching condition, soliton compression is quickly destroyed by the soliton self-frequency shift (SSFS). This is especially true for ultrashort pulses: SSFS inevitably impairs the degree of compression. We demonstrate numerically that soliton enhancement can be restored to some extent and the compressed soliton can be stabilized, provided that SSFS is canceled by a second pump wave. Still the available compression degree is considerably smaller than that in the Raman-free nonlinear fibers.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effect of particle characteristics on the evolution of particle size, particle morphology, and fabric of sands loaded under uniaxial compression

This work presents the results and analyses of uniaxial compression experiments performed on three silica sands. The sands have comparable particle-size distributions, but their particles differ in morphology and strength. Cylindrical samples of the three sands were compressed in a loading device placed inside an X-ray microscope (XRM) and scanned at multiple stress levels during uniaxial compression. 3D tomography data of the samples obtained from the XRM at different stress levels were then analyzed to obtain the distributions of particle size, particle morphology, and interparticle contact normals within the sample. Results indicate that: (1) the compressibility of the sands loaded under uniaxial compression is closely tied to particle morphology and strength and (2) the anisotropy in the orientations of interparticle contact normals generally increases with axial stress; however, this increase is limited by the occurrence of particle crushing in the sample.

3D X-ray computed tomography↗

Multi-Method Characterization of Compression Set in Fluorosilicone O-Rings

Fluorosilicone o-rings with varying levels of compression set were investigated with a variety of methods. Low field NMR experiments were able to elucidate if the sample had taken a compression set; however, this technique did not have the sensitivity to quantify the relative level of compression set of the o-ring. Furthermore, water sorption isotherms probe the interior void structure through void space occupation and while complex, the sorption isotherms indicate a systematic loss of void volume with increasing compression set. Similarly, variable temperature 129 Xe NMR experiments indicate an elimination of macroscopic void space with increasing compression. The NMR techniques, being noninvasive, have a unique ability to assess the service status of an o-ring in real time.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Impacts of swinging door lossy compression of synchrophasor data

As the number of operational Phasor Measurement Units (PMUs) is increasing, compression is becoming crucial for efficiently transferring and storing enormous amount of synchrophasor data continuously measured from a power system. Some utilities in the U.S. have already adopted a nonlinear compression technique, called Swinging Door Algorithm (SDA), assuming compressed data meets technical and regulatory requirements without resulting in any degradation of the measurements. This paper studies impacts of this compression algorithm on field measured and simulated PMU data, and presents results from spectral analyses of raw and decompressed measurements. The results show blind application of the SDA compression alters frequency content in the measurements and introduces false harmonics and aliasing. These can lead to false conclusions being drawn from the measurements about the power system condition.

42 ENGINEERING↗

Gamma Knife Radiosurgery for Benign Tumors With Symptoms From Brainstem Compression

Purpose: This study evaluated the role of radiosurgery in the management of symptomatic patients with brainstem compression from benign basal tumors. Methods and Materials: Over a 17-year, period 246 patients (202 vestibular schwannomas and 44 meningiomas) with brainstem compression from benign skull-base tumors were managed with Gamma Knife radiosurgery. Median tumor volumes were 3.9 cm{sup 3} (range, 0.8-39.0 mL) and 6.6 mL (range, 1.6-25.1 mL) for vestibular schwannomas and meningiomas, respectively. For both tumors, a median marginal dose of 13 Gy was prescribed. Median follow-up of patients was 65 months for vestibular schwannomas and 60 months for meningiomas. Patients were categorized into four groups on the basis of the tumor-brainstem relationship on neuroimaging. Results: Preservation of function was stratified according to grade of brainstem compression. We analyzed the effect of radiosurgery on symptoms of brainstem compression. The tumor control rate was 100 % for meningioma and 97% for vestibular schwannomas (although 5% required an additional procedure such as a ventriculoperitoneal shunt). In patients with vestibular schwannoma, serviceable hearing was preserved in 72.0%. Balance improved in 31.9%, remained unchanged in 56.5%, and deteriorated in 11.6% of patients who had imbalance at presentation. Balance improved significantly in patients who had less tumor compression (p = 0.0357) after radiosurgery. Symptoms improved in 43.2% of patients with meningioma. Conclusion: Radiosurgery is a minimally invasive option for patients with benign basal tumors that indent or distort the brainstem. A high tumor growth control rate and satisfactory rate of neurological preservation and symptom control can be obtained with radiosurgery.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Stiffening of nanoscale anatase Ti[subscript 0.9]Zr[subscript 0.1]O[subscript 2] upon multiple compression cycles

The compression behavior of nanoscale Zr-doped anatase was studied by means of a diamond anvil cell experiment with alternating cycles of compression and decompression in the stability field of anatase (up to 13 GPa). We found that multiple cycles of compression lead to stiffening of the material: Precompressed samples of nanoanatase Ti{sub 0.9}Zr{sub 0.1}O{sub 2} have a higher bulk modulus (K{sub 0} = 249(9) and 266(6) GPa) compared with the sample when compressed for the first time (K{sub 0} = 211(7) GPa). Upon compression, the crystallite size remains the same and the crystalline areas are free of defects. After the experiment, the crystallites are surrounded by amorphous rims, confirming the theoretical prediction by Pischedda et al. [Ultrastability and enhanced stiffness of similar to 6 nm TiO{sub 2} nanoanatase and eventual pressure-induced disorder on the nanometer scale, Phys. Rev. Let. 96 (2006) 035509] for nanoscale anatase, but yielding much lower pressures (12 GPa) for the onset of partial amorphization.

36 MATERIALS SCIENCE↗

Grain size and texture effect on compression behavior of hot-extruded Mg-3Al-1Zn alloys at room temperature

Hot-extruded AZ31 alloy was subjected to compression at room temperature. The influence of grain size and grain orientation on the compression behavior of the specimens was examined by optical microscopy, compression test and X-ray diffraction. Abundant twins activated during compression of extruded AZ31 magnesium alloy. The hot extruded AZ31 magnesium alloys had a higher Hall-Petch slope for compression than that for tension.

36 MATERIALS SCIENCE↗

Characterization of ultrafine-grained aluminum tubes processed by Tube Cyclic Extrusion–Compression (TCEC)

Tube Cyclic Extrusion–Compression as a novel severe plastic deformation technique for tubes was utilized for processing ultrafine grained 1050 aluminum alloy for the first time. In this method, aluminum tube is fully constrained and deformed between mandrel and chamber with a small neck zone. The material deformation during Tube Cyclic Extrusion–Compression processing analyzed and the grain refinement mechanism were described. The capability of Tube Cyclic Extrusion–Compression in grain refinement of the aluminum alloy was demonstrated by transmission electron microscopy observations and X-ray diffraction line profile analysis. The micrographs of the evolved microstructure show grain size of 850 nm and 550 nm after the first and second processing cycles of Tube Cyclic Extrusion–Compression, respectively. Mechanical properties of the initial and processed specimens were extracted from ring-hoop tensile tests. The documented results confirm grain refinement by showing remarkable increase in the yield and ultimate strengths. The main increase in strength and decrease in elongation take place after the first cycle. The microhardness assessments illustrate increase from the initial value of 29 Hv to 44 and 49 Hv respectively after the first and second cycles of Tube Cyclic Extrusion–Compression. There is a good homogeneity in peripheral microhardness and microhardness across the tube thickness. - Highlights: • Tubes of AA1050 for the first time were successfully SPD processed by TCEC. • The grain size was refined to 550 nm after two cycles of TCEC. • Notable increase in the strength and decrease in the elongation were documented. • The microhardness increased to 49 Hv from the initial value of 29 Hv. • Good homogeneity in the microhardness distribution was recorded.

36 MATERIALS SCIENCE↗

Investigating the effect of compression on solute transport through degrading municipal solid waste

Highlights: • The influence of compression on MSW flushing was evaluated using 13 tracer tests. • Compression has little effect on solute diffusion times in MSW. • Lithium tracer was conservative in non-degrading waste but not in degrading waste. • Bromide tracer was conservative, but deuterium was not. - Abstract: The effect of applied compression on the nature of liquid flow and hence the movement of contaminants within municipal solid waste was examined by means of thirteen tracer tests conducted on five separate waste samples. The conservative nature of bromide, lithium and deuterium tracers was evaluated and linked to the presence of degradation in the sample. Lithium and deuterium tracers were non-conservative in the presence of degradation, whereas the bromide remained effectively conservative under all conditions. Solute diffusion times into and out of less mobile blocks of waste were compared for each test under the assumption of dominantly dual-porosity flow. Despite the fact that hydraulic conductivity changed strongly with applied stress, the block diffusion times were found to be much less sensitive to compression. A simple conceptual model, whereby flow is dominated by sub-parallel low permeability obstructions which define predominantly horizontally aligned less mobile zones, is able to explain this result. Compression tends to narrow the gap between the obstructions, but not significantly alter the horizontal length scale. Irrespective of knowledge of the true flow pattern, these results show that simple models of solute flushing from landfill which do not include depth dependent changes in solute transport parameters are justified.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Transport of Compressed Woody Biomass: Correlating Rheology and Microcompounder Measurements

Transport of milled solid biomass can be problematic in biomass conversion processes due to the material’s high cohesiveness, low bulk density, and poor flowability. Here, the goal is to investigate the flow behavior of compressed biomass under conditions similar to compression-screw feeders. To mimic the flow of woody biomass inside a compression-screw feeder, two lignocellulosic biomass feedstocks were fed to a co-rotating twin-screw microcompounder. Force and screw speed from the microcompounder were correlated to viscosity in a traditional rheometer, where low-density polyethylene served as a control. The deformation of compressed biomass in a lab-scale compounder is strongly dependent on screw speed and moisture content. Shear stress in woody biomass decreased with the shear rate, indicating negative plastic viscosity. Moreover, viscosity decreased one order of magnitude as screw speed increased from 10 to 90 rpm. Increasing moisture from 10 to 50% reduced the viscosity of the compressed biomass by 60%.

09 BIOMASS FUELS↗