Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “BESS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29

Does an Island Approach to Higher Penetration Renewables Make Sense for the Mainland?

Does an Island Approach to Higher Penetration Renewables Make Sense for the Mainland? The US currently generates ~8% of its electricity from wind and solar. There are goals to get to 20% wind by 2030 and PV looking to be cost competitive at all sizes with similarly high penetration goals. Islands, such as Kaua'i and Guam, have much higher renewable energy goals. Kaua'I had a 50% RE goal by 2023, now they want to be 70% RE by 2030. Guam Power Authority (GPA) had a goal of 25% by 2035. They now have a goal of 50% by 2028. How have they/will they achieve these goals? Are there lessons learned from these smaller, island grids that can be applied to larger states, regions, or balancing authorities? This presentation will examine how these two island utilities have made such progress.

17 WIND ENERGY↗

Availability of Shielding Benchmark Experiment Data in the ICSBEP Handbook

The International Criticality Safety Benchmark Evaluation Projects (ICSBEP) has over two decades of experience under the auspices of the Organisation for Economic Co-operation and Development (OECD) Nuclear Energy Agency (NEA) to identify, evaluate, and compile a comprehensive data set of criticality safety benchmark data [1]. The activities of the ICSBEP have led to the continued success of the International Handbook of Evaluated Criticality Safety Benchmark Experiments (ICSBEP Handbook) [2]. The contents of the ICSBEP Handbook include benchmark specifications derived from nuclear facilities around the world, which have been utilized to support criticality safety efforts and also integral testing of nuclear data [3]. The 2020 edition of the ICSBEP Handbook will include data from 582 evaluations containing benchmark specifications for 5,053 critical, subcritical, or near-critical configurations. There are seven criticality-alarm-placement/shielding evaluations containing a total of 45 benchmark configurations, and ten fundamental physics evaluations containing a total of 237 measurements relevant to criticality safety applications. The purpose of this paper is to summarize those benchmarks relative to validation needs in shielding applications currently found within the ICSBEP Handbook. The current and future plans of shielding benchmarks with regards to the ICSBEP will also be discussed.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

The 2019 Edition of the IRPhEP Handbook

The International Reactor Physics Experiment Evaluation Project (IRPhEP) [1] was established to preserve and evaluate integral reactor physics experiment data, including separate or special effects measurements for nuclear energy and technology applications. Numerous international experiments have been performed over the past several decades to support reactor operations, safety, measurements, and design. Those experiments represent a significant investment of infrastructure, cost, and expertise that, in many instances, cannot be as easily reproduced. They represent valuable resources of data for present and future research, and provide the basis for recording, development, and validation of methods [2]. The primary focus of the IRPhEP is to provide an extensively peer-reviewed set of reactor physics integral data suitable for reactor designers and safety analysts to not just validate the analytical tools necessary to design next-generation nuclear reactors, but to establish the safety basis for their operation. Contributors worldwide collaborate to evaluate and review selected benchmark experiments for inclusion in the International Handbook of Evaluated Reactor Physics Benchmark Experiments (IRPhEP Handbook) [3]. More detailed discussion of the IRPhEP, including highlighted reactor physics benchmark evaluations, can be found in the November and December 2014 editions of Nuclear Science and Engineering [1]. Several new evaluations, and revisions to existing benchmarks have been prepared for inclusion in the 2019 edition of the IRPhEP Handbook (see Table I).

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

The 2019 Edition of the ICSBEP Handbook

Over the past several decades, innumerable experiments have been performed worldwide to support criticality safety. These experiments represent significant investment in infrastructure, expertise, and cost, and are valuable resources of data for present and future research. These valuable assets provide the basis for recording, development, and validation of methods and nuclear data [1]. If the experimental data are lost, the high cost to repeat many of these measurements would likely be prohibitive. The International Criticality Safety Benchmark Evaluation Project (ICSBEP) was established to: 1. Identify a comprehensive set of critical benchmark data and, to the extent possible, verify the data; 2. Evaluate the data and quantify overall uncertainties through various types of sensitivity analyses; 3. Compile the data into a standardized format; 4. Perform calculations of each experiment with standard criticality safety codes; and 5. Formally document the work into a single source of verified benchmark critical data. Annually, contributors from around the world continue to collaborate in the evaluation and review of select benchmark experiments for inclusion in the International Handbook of Evaluated Criticality Safety Benchmark Experiments (ICSBEP Handbook) [2]. Further information regarding the ICSBEP, including highlighted criticality safety benchmark evaluations, can be found in the September and October 2003 editions of Nuclear Science and Engineering [3]. New and recently revised evaluations have been prepared for inclusion in the 2019 edition of the ICSBEP Handbook.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

UMo Benchmark Experiment Data Needed to Support Computational and Nuclear Data Validation

Currently there are almost no benchmark experiment data available directly supporting neutronics modeling and simulation of ~20 wt.% 235U, UMo fuel contained within the Organisation for Co-operation and Development Nuclear Energy Agency (OECD NEA) international benchmark handbooks from the International Criticality Safety Benchmark Evaluation Project (ICSBEP) and International Reactor Physics Experiment Evaluation Project (IRPhEP). The benchmarks within these two handbooks represent the international standards used to support computational and nuclear data validation. Recent activities in nuclear data development supporting new neutronics thermal scattering cross sections for UMo fuel indicate the necessity to provide quality benchmark experiment data that can be utilized to support their validation and development. Preparation of high-integrity neutronics benchmarks from UMo experimental data will ensure proper integral testing of these cross sections, as well as serve to support computational validation of contemporary modeling and simulation software.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Neutronic Consideration of TREAT Facility Fuel SiC Recladding

The Transient Reactor Test (TREAT) Facility is an air-cooled reactor composed of graphite-urania fuel encapsulated in zirconium alloy canisters and surrounded by ~2 ft (~61 cm) of nuclear grade graphite. The primary role of TREAT is to provide in-pile nuclear-heated safety research via transient testing [1]. Benchmark efforts have demonstrated sensitivity of TREAT neutronics models to graphite cross section data and key neutron poisons found in the fuel assemblies [2]. During fabrication of TREAT fuel assemblies, a small concentration of boron was inadvertently introduced with variable concentration into the aggregate of fuel blocks prepared for TREAT use. The concentration of boron, and its respective uncertainty, represent the most sensitive component in a neutronics study; unfortunately, nothing can be done to reduce or otherwise mitigate its impact. Hydrogen in the fuel blocks reduces the mean free path of the core and its true quantity and uncertainty is approximated. The hydrogen remains from pitch binder used in the fuel fabrication process and was not completely released due to incomplete fuel graphitization. Destructive fuel testing is necessary to quantify the actual hydrogen content and to improve benchmark model quality. A third neutron poison of some significance is the hafnium impurity in the Zircaloy-3 (Zry-3) assembly cladding. The quantity of hafnium is expected to be within nominal manufacturing limits for nuclear grade zircaloy. Recladding the fuel assemblies with material that is less neutron absorbing is expected to benefit reactor neutron economy. Moreover, TREAT’s total transient energy is restricted based on the rate of Zry-3 oxidation in TREAT’s air coolant environment. Hence, cladding with more benign air reaction kinetics could dramatically uprate the facility’s experimental capability. Silicon carbide (SiC) has been proposed as a candidate material for recladding TREAT assemblies, as SiC/SiC demonstrate favorable properties within nuclear environments [3]. The current operational limits of TREAT are restricted by the oxidation of Zry-3. Change of the cladding to SiC could feasibly double the current temperature limitation. Recladding opportunities allow for previously damaged fuel assemblies to be returned to service, as Zry-3 is not commercially available. The initial effort required to consider proceeding with any recladding effort is to neutronically characterize key reactor parameters while replacing Zry-3 with SiC. A characterization summary, with respective results, is provided herein.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Establishing Maximal Core Excess Reactivity Envelope for TREAT Test Vehicle Insertion

The Transient Reactor Test (TREAT) Facility is an air-cooled reactor composed of graphite-urania fuel encapsulated in zirconium alloy canisters and surrounded by ~2 ft (~61 cm) of nuclear grade graphite. The primary role of TREAT is to provide in-pile nuclear-heated safety research via transient testing [1]. The following work represents further analyses building upon previously reported work to support larger volume test vehicles within TREAT [2]. The Broad Use Specimen Transient Experiment Rig (BUSTER) provides ample versatility for numerous transient test concepts. However, future testing and experiment needs will require testing environments of different in-core footprints. The versatility of TREAT allows for the development of variegated core layouts with key limitations emplaced as operational safety temperature restrictions and available core reactivity. The focus of this current effort is to gauge core arrangements for TREAT core loadings to support centralized experimental testing of varying dimensional capacity. The total core excess reactivity (ER) was computed for different arrangements to establish comparison tables that enable ready assessment of core ER available for future experiment concepts. Test vehicle worths would then be necessary to establish available ER to support transient testing requirements and to perform reactor performance and safety calculations [3,4].

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

A Method for Integrating an UBEM with GIS for Spatiotemporal Visualization and Analysis

Leveraging Geographic Information Systems (GIS) for spatiotemporal visualization and analysis of simulated UBEM datasets and real-world data simultaneously can assist in identifying opportunities, as well as potential barriers, to energy efficient and climate adaptation strategies. However, current GIS-based models that support interactive exploration of adaptation strategies and future scenarios are scarce and do not easily incorporate building energy use data for visual analysis over time. This paper describes a workflow to integrate simulated building energy consumption data associated with variable energy efficiency scenarios within a GIS platform for interactive spatiotemporal visualization to support climate adaptation decision-making. The contribution of the work presented is in the ability to selectively view and analyze simulated building energy performance data layered with other real-world geospatial data through an automated feedback loop between an UBEM and ArcGIS. An interactive interface is designed in ArcGIS to enable users to explore building performance scenarios spatially and over time. Using a downtown neighborhood in Syracuse, New York, USA, as a case study, preliminary results demonstrate how the workflow provides insight into existing energy use issues and potential for implementing strategies such as energy load shifting or building retrofits. A discussion includes opportunities as well as challenges to the workflow in facilitating understanding of urban energy model outputs by multiple stakeholders in evaluating potential energy efficient strategies.

ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATION↗

Status of the International Criticality Safety Benchmark Evaluation Project

The International Criticality Safety Benchmark Evaluation Project (ICSBEP) has continued its work generating evaluations of new and historical criticality benchmark experiments since the last update to the nuclear criticality safety community at the 11th International Conference on Nuclear Criticality Safety (ICNC 2019) in Paris, France. Three additional versions of the ICSBEP Handbook have been published since that update, and the Technical Review Group (TRG) held two in-person (in 2019 and 2023) and three virtual (2020 and 2021) meetings to review and approve additional benchmarks. The 2019 edition of the ICSBEP Handbook included five new evaluations with 79 new configurations, the 2020 version of the ICSBEP Handbook contained five new evaluations totaling 76 new configurations, and the 2021 version of the ICSBEP handbook contained five new evaluations with a total of 57 different configurations. The ICSBEP TRG met in October and December 2021, to review benchmarks for potential inclusion in the 2022 ICSBEP Handbook, with seven evaluations receiving provisional approval pending resolution of review group comments. Final comment resolution for some of these evaluations is currently underway and handbook publication should be completed soon. The ICSBEP TRG met again in person in April 2023 to review benchmarks for the 2023 ICSBEP Handbook, provisionally approving 7 new evaluations. The ICSBEP continues to deliver high-quality, peer reviewed evaluations of experiments relevant to the nuclear criticality safety community.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Capabilities development for transient testing of advanced nuclear fuels at TREAT

The TREAT facility is a unique capability at the Idaho National Laboratory currently being prepared for resumption of nuclear transient testing. TREAT is an air-cooled reactor where the driver core is made up of urania dispersed in graphite blocks and encapsulated in zirconium alloy cans. In addition to the reactor itself, the foundation for TREAT's capabilities will also include a suite of irradiation vehicles and supporting infrastructure to provide the desired specimen boundary conditions while supporting a variety of instrumentation needs. Although TREAT historically supported all kinds of nuclear fuels, including LWR's, SFR's, space nuclear propulsion, research reactor plate-type fuels, and even fuels for use in the driver core of other transient test reactors, the majority of TREAT's more-recent experiment programs revolved around SFR's and sodium-environment test capsules and loops. MK-series loop experiment-specific test trains could be outfitted with a variety of instruments to monitor test and specimen conditions while the fast neutron hodoscope collected information about fuel movement before, during, and after transient excursions. The SERTTA (Static Environment Rodlet Transient Test Apparatuses) devices will be general purpose vehicles capable of providing inert gas, water (up to PWR conditions), steam, or perhaps even molten sodium environments within vessel-like capsules. The Multi-SERTTA vehicle design is particularly novel as it makes use of the full active core length in TREAT to test four small rodlets (∼12 cm length), each within its own hermetic boundary, it will be capable of housing pre-irradiated fuel specimens. Additional modules and adaptations of Multi-SERTTA will enable rapid loop pressure blowdown to simulate LOCA conditions. The Super-SERTTA, akin to the Multi-SERTTA will offer more possibilities for simulating transient phenomena.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

TREAT neutronics analysis and design support, Part II: Multi-SERTTA-CAL

Experiment vehicle design is necessary in preparation for Transient Reactor Test (TREAT) facility restart and the resumption of transient testing to support Accident Tolerant Fuel (ATF) characterization and other future fuels testing requirements. Currently the most mature vehicle design is the Multi-SERTTA (Static Environments Rodlet Transient Test Apparatuses), which can accommodate up to four concurrent rodlet-sized specimens under separate environmental conditions. Robust test vehicle design requires neutronics analyses to support design development, optimization of the power coupling factor (PCF) to efficiently maximize energy generation in the test fuel rodlets, and experiment safety analyses. An integral aspect of prior TREAT transient testing was the incorporation of calibration experiments to experimentally evaluate and validate test conditions in preparation of the actual fuel testing. The calibration experiment package established the test parameter conditions to support fine-tuning of the computational models to deliver the required energy deposition to the fuel samples. The calibration vehicle was designed to be as near neutronically equivalent to the experiment vehicle as possible to minimize errors between the calibration and final tests. The Multi-SERTTA-CAL vehicle was designed to serve as the calibration vehicle supporting Multi-SERTTA experimentation. Models of the Multi-SERTTA-CAL vehicle containing typical PWR-fuel rodlets were prepared and neutronics calculations were performed using MCNP6.1 with ENDF/B-VII.1 nuclear data libraries; these results were then compared against those performed for Multi-SERTTA to determine the similarity and possible design modification necessary prior to construction of these experiment vehicles. The estimated reactivity insertion worth into the TREAT core is very similar between the two vehicle designs, with the primary physical difference being a hollow Inconel tube running down the length of the calibration vehicle. Calculations of PCF indicate that on average there is a reduction of approximately 6 % for PWR fuel rodlets irradiated under both wet and dry conditions. Changes to the primary or secondary vessel structure in the calibration vehicle can be performed to offset this discrepancy and maintain neutronic equivalency. Current possible modifications to the calibration vehicle include reduction of the primary vessel wall thickness, swapping Zircaloy-4 for stainless steel 316 in the secondary containment, or slight modification to the temperature and pressure of the water environment within the primary vessel. Removal of some of the instrumentation within the calibration vehicle can also serve to slightly increase the PCF. Future efforts include further modification and optimization of the Multi-SERTTA and Multi-SERTTA-CAL designs in preparation of actual TREAT transient testing. Experimental results from both test vehicles will be compared against calculational results and methods to provide validation and support additional neutronics analyses. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

TREAT neutronics analysis of water-loop concept accommodating LWR 9-rod bundle

The Transient Reactor Test (TREAT) facility that was commissioned in 1959 and that was put in stand-by in 1994, is now facing an upgrade to provide irradiation services to a variety of experimental programs. The neutronic studies presented in this paper show that the TREAT facility is capable of performing transient tests on fresh 9-rod PWR bundles in a water loop design constructed from Inconel piping using only fuel assemblies from the original core. High burnup rods in the same proposed design configuration approach, but do not meet, energy deposition targets for narrow-pulse reactivity insertion accident testing. The option to use a Zircaloy-based water loop was evaluated and found to increase the power coupling factor (PCF) adequately, but several engineering considerations show that the Inconel loop should be considered the baseline design option until detailed design work is performed. TREAT's capabilities for steam-based LOCA testing were also evaluated and found to allow for higher specimen energy deposition than RIA tests primarily because the reactor can release more energy over longer shaped transients. The same test configurations were evaluated in the presence of a partial TREAT-upgrade (TU) core with the notable observation that TU elements can enable high burnup rods to achieve RIA energy targets with the Inconel water loop. Further observations show that the partial TU core can help recover excess reactivity as needed and flatten pin-to-pin power profiles for more prototypic test conditions. These studies demonstrate that a simple U/C atom ratio gradient implementation results in more energy deposition into the test specimen and works to flatten the rod-to-rod power profile. It is expected that the actual, specially designed TREAT upgrade core will be much more effective than this study of a modified version demonstrates and deserves a comprehensive investigation to identify true capability. Overall, the complex interplay between fuel, geometry, neutron absorbers, and moderators emphasize that the facility's capabilities are flexible and further enabled by the ability to use TU elements.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Thermal-hydraulic performance of the TREAT Multi-SERTTA for reactivity initiated accident experiments

Experimental testing in the Multi-Static Environment Rodlet Transient Test Apparatus (SERTTA) will lead the rebirth of transient fuel testing in the United States as part of the Accident Tolerant Fuels (ATF) program. The Multi-SERTTA is comprised of 4 isolated pressurized environments capable of a wide variety of working fluids and thermal conditions. Ultimately, the TREAT reactor as well as the Multi-SERTTA test vehicle serve the purpose of providing desired thermal-hydraulic boundary conditions to the test specimen. The initial ATF testing in TREAT will focus on reactivity insertion accident (RIA) events using both gas and water environments including typical PWR operating pressures and temperatures. The heat transfer conditions during the high energy power pulses of RIA events remains a subject of large uncertainty and great importance for fuel performance predictions. To support transient experiments, the Multi-SERTTA vehicle has been modeled using RELAP5 with a baseline test specimen composed of fresh UO{sub 2} fuel in zircaloy cladding. The results show that for energy depositions less than 1380 J/g-UO{sub 2}, the vessel environment remains sub-supercritical. Two extremes of gap conductance show significant effect on event timing and peak cladding temperature but little effect on end state conditions. Inclusion of oxidation has increasing impact for increasing energy depositions. The effect of oxidation is non-negligible for planned TREAT experiments in the range of explored energy depositions. Pulse width has little impact on thermal hydraulic conditions under the assumptions used in this analysis. The model used in this work has been coupled to the fuel performance code, BISON, to accomplish best estimate predictive capability for Multi-SERTTA experiments. The results show the great flexibility and capacity of the TREAT Multi-SERTTA test vehicle to provide testing under a wide range of prototypic thermal-hydraulic conditions as never done before.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

TREAT neutronics analysis and design support, Part I: Multi-SERTTA

Experiment vehicle design is necessary in preparation for Transient Reactor Test (TREAT) facility restart and the resumption of transient testing to support Accident Tolerant Fuel (ATF) characterization and other future fuels testing requirements. Currently the most mature vehicle design is the Multi-SERTTA (Static Environments Rodlet Transient Test Apparatuses), which can accommodate up to four concurrent rodlet-sized specimens under separate environmental conditions. Robust test vehicle design requires neutronics analyses to support design development, optimization of the power coupling factor (PCF) to efficiently maximize energy generation in the test fuel rodlets, and experiment safety analyses. Calculations were performed to support analysis of a near-final design of the Multi-SERTTA vehicle, the design process for future TREAT test vehicles, and establish analytical practices for upcoming transient test experiments. Models of the Multi-SERTTA vehicle containing typical PWR-fuel rodlets were prepared and neutronics calculations were performed using MCNP6.1 with ENDF/B-VII.1 nuclear data libraries. Calculation of the PCF for reference conditions of a PWR fuel rodlet in clean water at operational temperature and pressure provided results between 1.10 and 1.73 W/g-MW depending on the location of the four Multi-SERTTA units with the stack. Basic changes to the Multi-SERTTA secondary vessel containment and support have minimal impact on PCF; using materials with less neutron absorption can improve expected PCF values, especially in the primary containment. An optimized balance is needed between structural integrity, experiment safety, and energy deposition in the experiment. Type of medium and environmental conditions within the primary vessel surrounding the fuel rodlet can also have a significant impact on resultant PCF values. The estimated reactivity insertion worth into the TREAT core is impacted more by the primary and secondary Multi-SERTTA vehicle structure with the experiment content and contained environment having a near negligible impact on overall system reactivity. Additional calculations were performed to evaluate the peak-to-average assembly powers throughout the TREAT core, as well as the nuclear heat generation for the various structural components of the Multi-SERTTA assembly. Future efforts include the evaluation of flux collars to shape the PCF for individual Multi-SERTTA units during an experiment such as to achieve uniformity in test unit environmental conditions impacted by the non-uniform axial flux/power profile of TREAT. Upon resumption of transient testing, experimental results from both the Multi-SERTTA and Multi-SERTTA-CAL will be compared against calculational results and methods for further optimization and design strategies. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Additions to the ICSBEP and IRPHEP handbooks since NCSD 2013

Innumerable experiments have been performed worldwide to support criticality safety activities. Those experiments represent significant investments in cost, expertise, and infrastructure; as such, they represent valuable assets as the basis for recording, development, and validation of methods and nuclear data vital for modern and future criticality safety needs. Preservation and evaluation of these experimental data as benchmarks serves to provide for the best interest of the nuclear criticality safety community. High-quality integral benchmark experiments have always been a priority. There is ever growing interest in developing integral benchmark data to increasingly quantify and reduce calculational uncertainties to meet the demands of future criticality safety needs supporting next generation reactors and advanced fuel cycle concepts. The importance of drawing upon existing benchmark data is becoming more apparent because of dwindling availability of critical facilities worldwide and the high cost of performing new experiments. Integral benchmark data from the International Handbook of Evaluated Criticality Safety Benchmark Experiments (ICSBEP Handbook) and the International Handbook of Reactor Physics Benchmark Experiments (IRPhEP Handbook) are widely utilized. Significant benchmark data have been added to those two handbooks since the last Nuclear Criticality Safety Division Topical Meeting in Wilmington, North Carolina (September-October 2013). This paper highlights those additions. The 2016 edition of the ICSBEP Handbook now includes data for 570 evaluations containing benchmark specifications for 4913 critical, subcritical, or near-critical configurations, representing contributions from over 20 countries. There are a total of seven criticality-alarm-placement/shielding evaluations containing a total of 45 benchmark configurations, and eight fundamental physics benchmark evaluations containing a total of 215 measurements relevant to criticality safety applications. The IRPhEP Handbook now includes data from 151 experimental series (representing 50 reactor facilities) and also represents contributions from over 20 countries. Of the 151 benchmarks, five are draft contributions. Both the ICSBEP and IRPhEP are collaborative efforts that involve numerous scientists, engineers, and administrative support personnel worldwide. Continued contribution to these handbooks is expected to further provide the high-quality benchmark data necessary to compliment criticality safety activities going forward. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Uncertainty Analysis in Critical Experiments of SORA Mockup

A series of static critical experiments were completed from September 1965 to August 1966 at the Oak Ridge National Laboratory Critical Experiments Facility (ORCEF) in support of the design of the Sorgente Rapida Reactor (SORA) under a cooperative agreement between EURATOM and the U.S. Atomic Energy Commission. The SORA which had been proposed by EURATOM and was described by Raievski and Larrimore was designed to be composed of rods of highly enriched uranium alloy latticed, as a fast, reflected, repetitively pulsed reactor to serve as a high-intensity source of neutrons for time-of-flight measurements. More information about the SORA design can be obtained in some references. The critical experiments, not including pulse testing, were performed with a mockup of the SORA reactor differing from the reactor principally in the use of iron in place of the coolant, of iron as reflector, and of uranium metal fuel in place of the alloy. A summary of the experiments for the mockup was compiled in report ORNL- 4263, in June, 1968, then published as a paper in 1969. Based on the available data from papers, reports mentioned above and the logbook, the typical 15 critical experiments were evaluated for experimental uncertainties for further benchmark analysis and inclusion in the ICSBEP Handbook. Through a series of rigorous procedures in analysis of the original experimental measurement data, the dimensions and displacement of individual components, and the isotopic contents, mass, and impurities of the individual components, the experimental uncertainties for the 15 configurations have been evaluated to be 0.00219 ∼0.00229 Δk{sub eff} for 11 configurations in type of the Reference Assembly, 0.00179 ∼0.00189 Δk{sub eff} for 4 configurations in type of the All-Iron Assembly. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗