Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Adsorbent”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Co-precipitation induces changes to iron and carbon chemistry and spatial distribution at the nanometer scale

Association of organic matter (OM) with mineral phases via co-precipitation is expected to be a widespread process in environments with high OM input and frequent mineral dissolution and re-precipitation. In contrast to surface area-limited adsorption processes, co-precipitation may allow for greater carbon (C) accumulation. However, the potential sub-micrometer scale structural and compositional differences that affect the bioavailability of co-precipitated C are largely unknown. In this work, we used a combination of high-resolution analytical electron microscopy and bulk spectroscopy to probe interactions between a mineral phase (ferrihydrite, nominally Fe 2 O 3 •0.5H 2 O) and organic soil-derived water-extractable OM (WEOM). In co-precipitated WEOM-Fe, nanometer-scale scanning transmission electron microscopy with electron energy loss spectroscopy (STEM-EELS) revealed increased Fe(II) and less Fe aggregation relative to adsorbed WEOM-Fe. Spatially distinct lower- and higher-energy C regions were detected in both adsorbed and co-precipitated WEOM-Fe. In co-precipitates, lower-energy aromatic and/or substituted aromatic C was spatially associated with reduced Fe(II), but higher-energy oxidized C was enriched at the oxidized Fe(III) interface. Therefore, we show that co-precipitation does not constitute a non-specific physical encapsulation of C that only affects Fe chemistry and spatial distribution, but may cause a bi-directional set of reactions that lead to spatial separation and transformation of both Fe and C forms. In particular, we propose that abiotic redox reactions between Fe and C via substituted aromatic groups (e.g., hydroquinones) play a role in creating distinct co-precipitate composition, with potential implications for its mineralization.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Phosphate-modulated transformation of Sb(V)-bearing ferrihydrite under microbial iron- and sulfate-reducing conditions

Antimony (Sb) is a toxic metalloid that poses environmental risks in terrestrial and aquatic systems. The fate of the Sb(V) oxyanion, Sb(OH) 6 − , is governed by complex biogeochemical processes, including immobilization by ferric (Fe(III)) oxides, reduction by sulfide, and the less-explored competitive adsorption with other anions such as phosphate (PO 4 3− ). Here, this study investigates the interplay between such mechanisms in controlling the behavior of Sb(V) associated with ferrihydrite (Fh) under Fe(III)- and sulfate-reducing conditions, with a particular emphasis on the role of phosphate in influencing Sb(V) mobility and transformation. Anoxic reactors that contained Sb(V)-coprecipitated Fh, varying PO 4 3− concentrations (0, 0.2, and 2 mM), and sulfate, were inoculated with a microbial community sourced from Sb-contaminated soil. Additionally, abiotic reactors with either Sb(V)-adsorbed or Sb(V)-coprecipitated Fh and different PO 4 3− loadings (0–100 mM) were created to investigate the competitive adsorption mechanisms in the absence of microbial activity. Results from the abiotic reactors suggest that Sb(V) is likely incorporated into the Fh structure, with only minor amounts remaining surface-bound and extractable by PO 4 3− . In the biotic reactors, microbial Fe(III) and sulfate reduction were more extensive in the presence of PO 4 3− . At 0.2 mM PO 4 3− , microbial activity transformed Fh into siderite and led to the complete reduction of Sb(V) to Sb(III) as stibnite (Sb 2 S 3 ). At 2 mM PO 4 3− , the greater coverage by PO 4 3− stabilized Fh and decreased the extent of both Fe(III) and Sb(V) reduction, and shifted the reduced products to mackinawite and Sb(III) adsorbed onto Fh, in addition to stibnite formation. This study demonstrates that while PO 4 3− may not directly compete with Sb(V) for sorption sites, it can influence Sb mobility in Fe(III)- and sulfate-reducing environments by enhancing microbial activity and altering the mineralization pathways.

Microbial Fe(III) and sulfate reduction↗
DOE OSTI2021

Simulation of 12-bed vacuum pressure-swing adsorption for hydrogen separation from methanol-steam reforming off-gas

This study focuses on analysis of a 12-bed vacuum pressure-swing adsorption (VPSA) process capable of purifying hydrogen from a ternary mixture (H 2 /CO 2 /CO 75/24/1 mol%) derived from methanol-steam reforming. The process produces 9 kmol H 2 /h with less than 2 ppm and 0.2 ppm of CO2 and CO, respectively, to supply a polymer electrolyte membrane fuel cell. The process model is developed in Aspen Adsorption® using the “uni-bed” approach. A parametric study of H 2 purity and recovery with respect to adsorption pressure, adsorbent height, activated carbon:zeolite ratio, feed composition, and number of beds is performed. Results show 12-bed VPSA can meet the H 2 purity goals, with H 2 recovery as high as 75.75%. Adsorption occurs at 7 bar, the column height is 1.2 m, and the adsorbent ratio is 70%:30%. Furthermore, a 4-bed VPSA can achieve the same purity goals as the 12-bed process, but H 2 recovery decreases to 61.34%.

03 NATURAL GAS↗
DOE OSTI2025

Mechanistic and kinetic relevance of hydrogen and water in CO 2 hydrogenation on Cu-based catalysts

Here, we ally steady-state kinetics, kinetic isotope effects, and density functional theory (DFT) calculations to illustrate that Cu-based catalysts remain saturated by H-adatoms (H*) and molecular formic acid (HCOOH**) during CO 2 hydrogenation. High H* coverage under methanol synthesis conditions is evidenced by reverse water-gas shift (RWGS) rates that exhibit positive H 2 reaction orders only at P H2 ≲ 0.5 bar, above which methanol synthesis and RWGS rates exhibit first and zeroth order dependence on P H2 , respectively. HCOOH** also accumulates on the surface with increasing P CO2 as informed by the Langmuir-type dependence on P CO2 (0.25-23 bar) for both methanol synthesis and RWGS. As both HCOOH** and H* have one H-atom per site occupied, the two species share the same P H2 dependence and give rise to CO 2 reaction orders that are independent of P H2 . Surface coverages determined based on kinetic analyses are further corroborated with DFT-derived adsorption energies that show favorable HCOOH** adsorbate-adsorbate interactions as well as repulsive interactions for bidentate formate (HCOO**) on H*-saturated surfaces. Methanol selectivity remains invariant with P CO2 and P CO despite CO inhibiting reaction rates, thereby demonstrating methanol synthesis and RWGS occur on the same active site. In contrast, water preferentially inhibits methanol synthesis rates, increases methanol synthesis H 2 reaction order from 1.0 to 1.5, and alters the methanol synthesis H 2 /D 2 kinetic isotope effect; the inhibitory effect of H 2 O thus cannot be attributed to competitive adsorption alone and instead reflects a change in the rate-determining step for methanol synthesis. The disparate kinetics of methanol synthesis and RWGS evince a branching pathway where methanol is formed from formates and CO is formed from carboxylates. The presented work thus identifies the relevant surface species, underscores the distinct catalytic role of water in branching methanol synthesis and RWGS pathways, and, in doing so, details a mechanistic picture that yields predictable rates and reaction orders for both methanol synthesis and RWGS on Cu-based CO 2 hydrogenation catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Enhanced rare earth element recovery with cross-linked glutaraldehyde-lanthanide binding peptides in foam-based separations

Lanthanide Binding Tag (LBT) peptides that coordinate selectively with lanthanide ions can be used to replace the energy intensive processes used for the separation of rare earth elements (REEs). These surface-active biomolecules, once selectively complexed with the trivalent REE cations, can adsorb to air/aqueous interfaces of bubbles for foam-based REEs recovery. Glutaraldehyde, an organic compound that is a homobifunctional crosslinker for proteins and peptides, can be used to enhance the adsorption and interfacial stabilization of lanthanide-bound peptides films. The stability of the interfacial cross-linked films was tested by measuring their dilational and shear surface rheological properties. Surface activity of the adsorbed species was analyzed using pendant drop tensiometry, while surface density and molecular arrangement were determined using x-ray reflectivity and x-ray fluorescence near total reflection. Glutaraldehyde cross-linked REE-peptide complexes enhance the adsorption of lanthanides to air-water interfaces, resulting in thicker interfacial structures. Subsequently, these thicker layers enhance the dilational and shear interfacial rheological properties. The interfacial film stabilization and REEs extraction promoted by the cross-linker presented in this work provides an approach to integrate glutaraldehyde as a substitute of common foam stabilizers such as polymers, surfactants, and particles to optimize the recovery of REEs when using biomolecules as extractants.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Adsorptive recovery of volatile fatty acids from wastewater fermentation broth

This work developed an adsorptive separation and recovery process for anaerobically generated volatile fatty acids (VFAs) from swine wastewater fermentation. Batch adsorption studies were conducted using several weak anion exchange resins and synthetic adsorbent resins to identify a suitable candidate. Relite RAM2 with a tertiary amine functional group showed the highest adsorption (over 98%) of hexanoic acid. Under the different pH values (1.8–7.5) and extraction temperatures (30–50 ↑C), the highest adsorption was observed at a pH of 3.2, which is below the pKa of hexanoic acid, at all the evaluated temperatures. A full factorial design was used to optimize the resin and VFA concentrations, wherein over 99% adsorption could be achieved when the ratio of VFA to resin was below 0.23 (g/g) for model solution (VFAs in water). The adsorption equilibrium could be achieved within 30 min of contact time and 0.5% w/v NaOH was identified as a suitable desorption agent. Under the optimal conditions, 65–72% of VFAs present in fermentation broth was adsorbed, which was increased to 72–76% by using fresh resins. The VFAs adsorption and recovery efficiency were maintained for 9 successive cycles without requiring extensive resin washing and regeneration for both model solution and fermentation broth. Altogether, the work presents a comprehensive study for resin adsorption to recover VFAs and provides a potential industrial-relevant process to recover VFAs from fermentation broth.

09 BIOMASS FUELS↗
DOE OSTI2020

Activation and surface reactions of CO and H 2 on ZnO powders and nanoplates under CO hydrogenation reaction conditions

Here, activation and surface reactions of CO and H 2 on ZnO powders and nanoplates under CO hydrogenation reaction conditions were (quasi) in situ studied using temperature programmed surface reaction spectra, diffuse reflectance Fourier transform infrared spectroscopy, inelastic neutron scattering spectroscopy and electron paramagnetic resonance. CO undergoes disproportion reaction to produce gaseous CO 2 and surface carbon adatoms, and adsorbs to form surface formate species. H 2 adsorption forms dominant irreversibly-adsorbed surface hydroxyl groups and interstitial H species and very minor surface Zn-H species. Surface formate species and hydroxyl groups react to produce CO 2 and H 2 , while surface carbon adatoms are hydrogenated by surface Zn-H species sequentially to produce CH(a), CH 2 (a), CH 3 (a) and eventually gaseous CH 4 . The ZnO nanoplates, exposing a higher fraction of Zn-ZnO(0001) and O-ZnO(000–1) polar facets, are more active than the ZnO powders to catalyze CO hydrogenation to CH 4 . These results provide fundamental understanding of the reaction mechanisms and structural effects of CO hydrogenation reaction catalyzed by ZnO-based catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Degradation and fate of 2,4-dinitroanisole (DNAN) and its intermediates treated with Mg/Cu bimetal: Surface examination with XAS, DFT, and LDI-MS

In this article, a novel Mg-based bimetal reagent (Mg/Cu) was used as an enhanced reductive system to degrade insensitive munition 2,4-dinitroanisole (DNAN), a contaminant found in energetic-laden waste. Degradation of DNAN was significantly impacted by dissolved oxygen and studied in anoxic and oxic bimetal systems (i.e., purging with N 2 , air, or O 2 gas). Degradation occurred through sequential nitroreduction: first one nitro group was reduced (ortho or para) to form short-lived intermediates 2-amino-4-nitroanisole or 4-amino-2-nitroanisole (2-ANAN or 4-ANAN), and then subsequent reduction of the other nitro group formed 2,4-diaminoanisole (DAAN). The nitro-amino intermediates demonstrated regioselective reduction in the ortho position to 2-ANAN; Regioselectivity was also impacted by the anoxic/oxic environment. Under O 2 -purging DNAN degradation rate was slightly enhanced, but most notably O 2 significantly accelerated DAAN generation. DAAN also further degraded only in the oxygenated Mg/Cu system. Adsorption of DNAN byproducts to the reagent occurred regardless of anoxic/oxic condition, resulting in a partition of carbon mass between the adsorbed phase (27%-35%) and dissolved phase (59%-72%). Additional surface techniques were applied to investigate contaminant interaction with Cu. Density functional theory (DFT) calculations identified preferential adsorption structures for DNAN on Cu with binding through two O atoms of one or both nitro groups. X-ray absorption spectroscopy (XAS) measurements determined the oxidation state of catalytic metal Cu and formation of a Cu-O-N bond during treatment. Laser desorption ionization mass spectrometry (LDI-MS) measurements also identified intermediate 2-ANAN adsorbed to the bimetal surface.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Review of the adsorbents/catalysts for the removal of sulfur compounds from natural gas

Here this paper aims to provide a compilation of studies on adsorptive removal of H2S and organic sulfur compounds from natural gas at relatively low temperatures and pressures. The manuscript compares sulfur uptakes among different materials, including zeolites, activated carbons, metallic organic frameworks (MOFs), and metal oxides, and the impact of modifications to these materials. Best sulfur uptakes were achieved by adding metallic or nitrogen species to the adsorbent surfaces. This contribution to the peer-reviewed literature could provide a better understanding of the improvements necessary to achieve greater sulfur capacities and the mechanisms of sulfur interactions with adsorbents' surfaces.

03 NATURAL GAS↗
DOE OSTI2021

Superior removal of As(III) and As(V) from water with Mn-doped β-FeOOH nanospindles on carbon foam

Arsenic pollution of water is one of the severest environmental challenges threatening human health. Iron-based nanomaterials have been demonstrated effective in arsenic removal. However, they generally suffer from low removal efficiency towards highly toxic As(III), loss of active sites owing to agglomeration, and poor reusability. Herein, we report a carbonized melamine foam supported Mn(IV)-doped β-FeOOH nanospindles(CF@Mn-FeOOH NSp) for tackling the technical hurdles. The designed CF@Mn-FeOOH NSp appears as a free-standing monolith through a low-cost and straightforward hydrothermal method. The atomic-scale integration of Mn(IV) into β-FeOOH enables an oxidation-adsorption bifunctionality, where Mn(IV) serves as oxidizer for As(III) and Fe(III) acts as adsorber for As(V). The maximal adsorption capacity for As(V) and As(III) can reach 152 and 107 mg g -1 , respectively. Meanwhile, As in simulated high arsenic groundwater can be decreased to below 10 μg L -1 within 24 h. By simple "filtrating-washing", 85% and 82% of its initial adsorption capacity for As(V) and As(III) can be easily recovered even after 5-cycles reuse. Kinetics and isotherm adsorption study indicate that the arsenic adsorption behavior is mainly through chemical bonding during single-layer adsorbing process. The as-prepared CF@Mn-FeOOH offers a scalable, efficient, and recyclable solution for arsenic removal in groundwater and wastewater from mines and industry.

63 RADIATION, THERMAL, AND OTHER ENVIRON. POLLUTAN↗
DOE OSTI2024

Influence of porous aluminosilicate grain size materials in experimental and modelling Cs + adsorption kinetics and wastewater column process

This paper focuses on the influence of the grain size of a geopolymer based adsorbent on its Cs + adsorption performances both in batch and fixed-bed process. The geopolymer phase was used as a binder to support NaY zeolite particle in a 20 wt% charged porous composite with 160 m 2 .g –1 of porous surface area. These samples were shaped with three grain sizes (50 /100/500 µm) to remove 80–90 mg/g of Cs + in batch and column operations. After their microstructural and porous characterizations, their efficiency and adsorption characteristics were investigated through adsorption isotherms and kinetic in the two processes. While the grain size has no influence on the maximal extraction capacity of the adsorbent, it strongly affects the sorption kinetic. By coupling experimental data and a modelling approach, the complex sorption mechanism was highlighted, suggesting a new insight of the contaminant sorption kinetic. Then, comparison of batch and column adsorption experiments illustrates the detailed explanation of various process parameters for column study. The results show challenges for fixed-bed column utilization by the choice of the appropriate grain size as a compromise between the material sorption kinetic and hydrodynamic considerations. Furthermore, this is of high importance to more accurately optimize the design of column adsorption to assess the transport of Cs+ in multi-porous tailored grain size materials.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Synthesis of high-surface area tungstated zirconia by atomic layer deposition on mesoporous silica

Atomic layer deposition (ALD) was used to prepare ZrO 2 films on the surface of the mesoporous silica, SBA-15, and to modify the surface of these films with WO 3 in order to form tungstated zirconia. Adsorption-desorption isotherms, pore size distributions, and transmission electron microscopy demonstrated that the ALD synthesis produced zirconia films that were conformal to the SBA-15 pores. DRIFT spectroscopy of pyridine adsorbed on the tungstated-zirconia SBA-15 samples showed adsorbed pyridinium ions, confirming the presence of Brønsted-acid sites on this material, consistent with what has been reported for bulk tungstated zirconia. Here, the ALD-synthesized, tungstated-zirconia SBA-15 was also shown to be active in the acid-catalyzed H-D exchange between toluene and D 2 O.

Brønsted acid site↗
DOE OSTI2022

Effects of oxygen on the adsorption/oxidation of aqueous Sb(III) by Fe-loaded biochar: An X-ray absorption spectroscopy study

Fe-loaded biochar (FeBC) has been considered for Sb(III) adsorption, but the effects of oxygen (O 2 ) on the adsorption need further investigation. Liquid-/solid-phase analyses were conducted to investigate the role of O 2 in the Sb(III) adsorption by FeBC. The adsorption was best described by the pseudo-second-order (PSO) model for kinetic results and by the Langmuir model for thermodynamic results. More than 96.8 % of Sb(III) was adsorbed by FeBC, and available O 2 increased the liquid-phase Sb(III) oxidation efficiency by 2.1–7.5 times. The peak changes at ~1640 and 3450 cm -1 in FTIR spectra indicated the occurrence of inner-sphere complexation between Sb(III)/Sb(V) and hydroxyl (–OH)/carboxyl (–COOH) groups in FeBC under aerobic and anaerobic conditions. Fe/Sb X-ray absorption spectroscopy (XAS) analysis results showed aqueous Sb(III) complexed to the edge-sharing Fe(III)-O-Fe(III) in FeBC. Regardless of whether O 2 was available or not, solid-phase edge-sharing Fe(III)-O-Sb(V) complexes (~3.05 Å), which had lower toxicity and migration ability than aqueous Sb(III), formed through a ligand-to-metal charge-transfer (LMCT) process. More than 91 % of adsorbed Sb(III) was oxidized to edge-sharing Fe(III)-O-Sb(V) complexes in 3 h. Additionally, the Sb(V) from liquid-phase oxidation could also directly complex to the Fe(III)-O-Fe(III) and form edge-sharing Fe(III)-O-Sb(V) complexes. Here these results provide evidence to inform further FeBC application for the Sb-contaminated water treatment.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Selective recovery of rare earth elements with ligand-functionalized polymers in fixed-bed adsorption columns

Rare earth elements (REE) are a group of valuable metals with growing demand and broad applications. Mineral ores, the traditional sources of REE, require significant capital investment and their refinement has been a source of environmental contamination. Industrial fluids and natural REE-bearing liquids are potential alternative sources for these metals. This work investigated the performance and REE selectivity of polymer resin beads functionalized with N,N-bis(phosponomethyl)glycine (BPG) for extraction of REE from saline solutions in fixed-bed adsorption columns. Competitive batch adsorption experiments were conducted with various metals (Nd, Gd, Ho, Al, Fe, Co, Ni, Ba, Pb, Th, and U) and the BPG-functionalized resins were up to 137 times more selective for REE than aminated resins. In column experiments, the BPG-functionalized resins preferentially adsorbed heavier metals and REE were strongly retained in the functionalized column, taking 270 times longer than the amine column to reach 10% breakthrough and 128 times longer to reach 50% breakthrough. REE bound to the BPG-functionalized resins were recovered with a dilute HNO3 solution, yielding REE concentrations up to 236 times higher than the influent feedstock. This work provides new insight into the operational performance of novel functionalized adsorbents for recovery of REE from saline fluids.

42 ENGINEERING↗
DOE OSTI2022

In-situ synthesized N-doped ZnO for enhanced CO 2 sensing: Experiments and DFT calculations

Chemiresistive CO 2 sensing is attractive due to low cost and ease of chip-level integration. Our previous studies (Yong Xia, 2021) showed the well-developed ZnO material fabricated by in-situ annealing exhibited good CO 2 sensing performance. Here, we have expanded on those studies, including CO 2 cyclic tests under both dry air and N 2 background whereby a much higher response to CO 2 in N 2 background was observed. In this study, detailed density functional theory calculations were conducted to understand the behavior. The results indicated nitrogen doping is mainly responsible for the observed response. In the presence of pre-adsorbed O 2 , N-doped ZnO can no longer interact with CO 2 , which agrees well with the observation of higher response in N 2 background. Furthermore, density of states analysis showed N sp 2 hybridized orbital and N 2p orbital of the N dopant mixed with sp 2 hybridized orbital of C atom and 2p orbitals of C/O atoms in CO 2 to form σ and π bonds, respectively. However, they mixed with O 2s/2p orbitals of O atom in O 2 when pre-adsorbed O 2 was present, hindering CO 2 interaction with N-doped ZnO, and resulting in limited response in air. The illustrated mechanism does not only further the understanding of metal oxide-based CO 2 sensing, but also guide the design of new functional materials for CO 2 sensing or capture.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Comparing the performance of density functionals in describing the adsorption of atoms and small molecules on Ni(111)

Reaction networks calculated using density functional theory (DFT) play a crucial role in understanding and predicting heterogeneous catalyst performance. However, results obtained using different density functionals can vary significantly. Accordingly, it is important to assess the accuracy of available functionals in capturing adsorption energetics derived from single-crystal adsorption microcalorimetry experiments. Here, we evaluate how different density functionals describe the molecular and dissociative adsorption of CH 3 I, the adsorption of CH 3 , I, and H, and the dissociative adsorption of CH 4 on Ni(111). First, we identify energetically-preferred adsorbed states for each adsorbate at three surface coverages and calculate the corresponding enthalpies of adsorption at 160 K. Then, we compare the results to experimental measurements published in the literature. For each adsorption process we find at least one functional that is quantitatively accurate within experimental error, but no functional is accurate (within experimental error) for all adsorption processes studied. Even when assuming an additional DFT error of ±20 kJ/mol on top of the experimental error, only the PBE-D3 and RPBE-D3 functionals are accurate for all considered adsorption systems. Overall, these results indicate that quantitative agreement between density functional theory calculations and experimental measurements is both system- and functional-dependent. Importantly, single-crystal adsorption microcalorimetry experiments will continue to play an important role for benchmarking density functionals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

A comparative analysis of different van der Waals treatments for molecular adsorption on the basal plane of 2H-MoS 2

The binding energy of hydrogen sulfide, ammonia, ethane, ethylene, butadiene, benzene, toluene, pyridine, pyrrole, and thiophene on the basal plane of the semi-conducting 2H-molybdenum sulfide (MoS 2 ) was calculated with the following flavors of Density Functional Theory (DFT): GGA-PW91, PBE-D3, vdW-DF, optPBE, optB86b, optB88, vdW-TS, and BEEF-vdW. The GGA-PW91 binding energies are negligible (<0.07 eV in magnitude) in all cases. The predictions with vdW-DF and PBE-D3 are the closest (error <0.05 eV) to the isosteric heats of adsorption calculated from reported temperature programmed desorption data for thiophene and butadiene. For all dispersion flavors examined here, the magnitude of the dispersion contribution to the binding energy increases linearly with the number of heavy atoms in the adsorbate, with each atom contributing 0.05 eV (BEEF-vdW) – 0.09 eV (optB88-vdW). Further, this implies that the calculated adsorption constants of molecules larger than acridine (i.e., comprising > 14 non-heavy atoms) can vary by more than four orders of magnitude at industrial conditions depending on the chosen method of dispersion correction. Further, dispersion effects fall off rapidly (>0.03 eV/ non-hydrogen atom/Å) as the adsorbate-surface distance increases.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗