Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ANTIMONY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29

Design and fabrication of prototype 6×6 cm 2 microchannel plate photodetector with bialkali photocathode for fast timing applications

Planar microchannel plate-based photodetector with bialkali photocathode is capable of fast and accurate time and position resolutions. A new 6 cm x 6 cm photodetector production facility was designed and built at Argonne National Laboratory. Small form-factor MCP-based photodetectors completely constructed of glass were designed and prototypes were successfully fabricated. Knudsen effusion cells were incorporated in the photocathode growth chamber to achieve uniform and high quantum efficiency hotocathodes. The thin film uniformity distribution was simulated and measured for an antimony film deposition, showing uniformity of better than 10%. Several prototype devices with bialkali photocathodes have been fabricated with the described system and their characteristics were evaluated in the large signal (multi-PE) limit. A typical prototype device exhibits time-of-flight resolution of ~ 27 psec and differential time resolution of ~ 9 psec, corresponding to spatial resolution of ~ 0.65 mm.

bialkali photocathode↗

Large area planar photocathode for MCP-based photodetectors

We report on the principle, design, fabrication, and characterization of a large-area planar bialkali photocathode. Herein, sequential photocathode growth process was investigated, and the growth parameters, especially the initial antimony layer thickness, were optimized. The source arrangement and configuration were also simulated and the preferred configuration was chosen for numerical and experimental studies. Photocathode with average QE of 18% and activation area of similar to 40 square inches was experimentally demonstrated, making it a candidate for MCP-based photodetector applications. Further improvements were also discussed to enhance the uniformity and QE value of the photocathodes.

47 OTHER INSTRUMENTATION↗

A review of Sb 2 Se 3 photovoltaic absorber materials and thin-film solar cells

Energy generated from environmentally friendly, cost-effective solar cells is a key aspect for developing a clean renewable-energy economy. Non-toxic and Earth-abundant materials with high absorption coefficient (>10 5 cm -1 ) and optimal bandgap (1-1.5 eV) have received great attention as photovoltaic (PV) absorber layers during the last few decades. Among them, antimony selenide (Sb 2 Se 3 ) has been a promising PV absorber, with steadily increasing power-conversion efficiency (PCE) compared to other emerging compounds. Very recent studies showed that high-quality ZnO:Al/ZnO/CdS/TiO 2 /Sb 2 Se 3 /MoSe 2 /Mo devices with PCE of 9.2% can be fabricated using cost-effective novel compounds. Considering these recent advances, this article provides an overview of the material properties of Sb2Se3 thin films and the recent progress made with Sb 2 Se 3 -based solar cells. Furthermore, analysis of Sb 2 Se 3 -based thin-film solar cells has also shown that the devices have relatively good light management due to their suitable bandgap and high absorption coefficient, whereas carrier management, i.e. collection efficiency of photo-generated carriers, needs significant improvement. Overall, this study provides background knowledge on material properties and device performance and suggests main research directions to overcome the limiting factors of solar cell performance.

14 SOLAR ENERGY↗

A theoretical study of the bonding properties of R 4 Sb 3 compounds

Here, this study investigates the electronic structure and bonding properties of rare-earth antimonide compounds, specifically Yb 4 Sb 3 and La 4 Sb 3 , utilizing density functional theory calculations. The analysis reveals that Yb 4 Sb 3 exhibits a predominantly ionic character whereas La 4 Sb 3 displays a greater degree of covalent bonding. Moreover, the presence of divalent ytterbium leads to p-type conduction at high temperatures in Yb 4 Sb 3 . Conversely, La 4 Sb 3 displays n-type conduction because of a larger electronic transfer from the rare-earth metal towards antimony. These findings provide valuable insights into the structural and electronic properties that govern the performance of R 4 Sb 3 compounds, contributing to the development of advanced materials for thermoelectric energy conversion.

36 MATERIALS SCIENCE↗

Understanding the Origins of Higher Capacities at Faster Rates in Lithium-Excess Li x Ni 2–4 x /3 Sb x /3 O 2

Here, the lithium-excess Li x Ni 2-4x/3 Sb x/3 O 2 (LNSO) materials were previously shown to demonstrate higher capacities and improved cyclability with increasing lithium content. While the performance trend is promising, observed capacities are much lower than theoretical capacities, pointing to a need for further understanding of active redox processes in these materials. In this work, we study the electrochemical behavior of the LNSO materials as a function of lithium content and at slow and fast rates. Surprisingly, Li 1.15 Ni 0.47 Sb 0.38 O 2 (LNSO-15) exhibits higher discharge capacities at faster rates and traverses distinct voltage curves at slow and fast rates. To understand these two peculiarities, we characterize the redox activity of nickel, antimony, and oxygen at different rates. While experiments confirm some nickel redox activity and oxygen loss, these two mechanisms cannot account for all observed capacity. We propose that the balance of the observed capacity may be due reversible oxygen redox and that the rate-dependent voltage curve features may derive from irreversible nickel migration occurring on slow charge. As future high energy density cathodes are likely to contain both lithium excess and high nickel content, both of these findings have important implications for the development of novel high capacity cathode materials.

36 MATERIALS SCIENCE↗

Facile Preparation of Light Emitting Organic Metal Halide Crystals with Near-Unity Quantum Efficiency

Here, we report the synthesis and characterization of (Ph 4 P) 2 SbCl 5 , a novel ionically bonded organic metal halide hybrid with a zero-dimensional (0D) structure at the molecular level. By cocrystallization of tetraphenylphosphonium (Ph 4 P + ) and antimony (Sb 3+ ) chloride salts, (Ph 4 P) 2 SbCl 5 bulk single crystals can be prepared in high yield, which exhibit a highly efficient broadband red emission peaked at 648 nm with a photoluminescence quantum efficiency (PLQE) of around 87%. Density functional theory (DFT) calculations reveal the origin of emission as phosphorescence from the excitons localized at SbCl 5 2– with strong excited-state structural distortion. Interestingly, (Ph 4 P) 2 SbCl 5 bulk crystals with a PLQE of around 100% can be prepared via a rapid crystal growth process within minutes, followed by a spontaneous structural transformation. It was found that the rapid growth process yielded a yellow emitting kinetically favored metastable product containing solvent molecules, which turned into the red emitting thermodynamically stable product slowly at room temperature or quickly upon thermal treatment.

36 MATERIALS SCIENCE↗

Antimonite Complexation with Thiol and Carboxyl/Phenol Groups of Peat Organic Matter

Peatlands and other wetlands with abundant natural organic matter (NOM) are important sinks for antimony (Sb). While formation of Sb(III) sulfide phases or Sb(III) binding to NOM are discussed to decrease Sb mobility, the exact binding mechanisms remain elusive. Here, we reacted increasing sulfide concentrations with purified model peat at pH 6, forming reduced organic sulfur species, and subsequently equilibrated the reaction products with 50 μM of antimonite under anoxic conditions. Sulfur solid-phase speciation and the local binding environment of Sb were analyzed using X-ray absorption spectroscopy. We found that 85% of antimonite was sorbed by untreated peat. Sulfide-reacted peat increased sorption to 98%. Shell-by-shell fitting of Sb K -edge X-ray absorption fine structure spectra revealed Sb in untreated peat bound to carboxyl or phenol groups with average Sb–carbon distances of ~2.90 Å. With increasing content of reduced organic sulfur, Sb was progressively coordinated to S atoms at distances of ~2.45 Å and Sb–carbon distances of ~3.33 Å, suggesting increasing Sb–thiol binding. Iterative target factor analysis allowed exclusion of reduced inorganic Sb–sulfur phases with similar Sb–sulfur distances. In conclusion, even when free sulfide concentrations are too low for formation of Sb–sulfur precipitates, peat NOM can sequester Sb in anoxic, sulfur-enriched environments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis of Layered Gold Tellurides AuSbTe and Au 2 Te 3 and Their Semiconducting and Metallic Behavior

Previous studies on natural samples of pampaloite (AuSbTe) revealed the crystal structure of a potentially cleavable and/or exfoliable material, while studies on natural and synthetic montbrayite (Sb-containing Au 2 Te 3 ) claimed various chemical compositions for this low-symmetry compound. Few investigations of synthetic samples have been reported for both materials, leaving much of their chemical, thermal, and electronic characteristics unknown. Here, in this study, we investigate the stability, electronic properties, and synthesis of the gold antimony tellurides AuSbTe and Au 1.9 Sb 0.46 Te 2.64 (montbrayite). Differential thermal analysis and in situ powder X-ray diffraction revealed that AuSbTe is incongruently melting, while Au 1.9 Sb 0.46 Te 2.64 is congruently melting. Calculations of the band structures and four-point resistivity measurements showed that AuSbTe is a semiconductor and Au 1.9 Sb 0.46 Te 2.64 a metal. Various synthesis attempts confirmed the limited stable chemical composition of Au 1.9 Sb 0.46 Te 2.64 , identified successful methods to synthesize both compounds, and highlighted the challenges associated with single-crystal synthesis of AuSbTe.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural, Chemical, Electrical, and Thermal Properties of n -Type NbFeSb

Here, we report on the structural, chemical, electrical, and thermal properties of n -type polycrystalline NbFeSb synthesized by induction melting of the elements. Although several studies on p -type conduction of this half-Heusler composition have recently been reported, including reports of relatively high thermoelectric properties, very little has been reported on the transport properties of n-type compositions. We combine transport property investigations together with short- and long-range structural data obtained by Mössbauer spectroscopy of iron-57 and antimony-121 and by neutron total scattering, as well as first-principles calculations. In our investigation, we show that n -type conduction can occur from antiphase boundaries in this material. This work is intended to provide a greater understanding of the fundamental properties of NbFeSb as this material continues to be of interest for potential thermoelectric applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Bismuth as a Reactive Solvent in the Synthesis of Multicomponent Transition-Metal-Bearing Bismuthides

Employment of liquid bismuth (Bi) allows the facile single-crystal growth of compounds containing elements with high melting points, provided that these elements have reasonably high solubility in Bi. Utilization of the Bi flux approach yielded two new ternary bismuthides, SrNi 0.17(1) Bi 2 [a defect variant of the BaCuSn 2 type, space group Cmcm , α = 4.879(2) Å, b = 17.580(6) Å, and c = 4.696(2) Å] and CaTi 3 Bi 4 [NdTi 3 (Sn 0.1 Sb 0.9 ) 4 structure type, space group Fmmm , a = 5.6295(7) Å, b = 9.8389(1) Å, and c = 23.905(3) Å]. In addition, the ternary antimonide CaV3Sb4, isostructural with CaTi 3 Bi 4 , was synthesized from antimony (Sb) flux, and analyzed with the goal of validating structural assessment of the bismuthide analogue, where the X-ray crystallographic work proved to be very challenging. All synthesized compounds exhibit complex crystal structures featuring quasi-two-dimensional building blocks of different topologies. First-principle calculations reveal hypervalent bonding in the homoatomic Bi subunits. Lastly, physical property measurements indicate metallic conductivity and the absence of localized magnetism in the studied compounds.

36 MATERIALS SCIENCE↗

Phase Stability and Electronic Structure of Prospective Sb-Based Mixed Sulfide and Iodide 3D Perovskite (CH 3 NH 3 )SbSI 2

Lead-free antimony-based mixed sulfide and iodide perovskite phases have recently been reported to be synthesized experimentally and to exhibit reasonable photovoltaic performance. In this work, through a combination of experimental validation and computational analysis, we show no evidence of the formation of the mixed sulfide and iodide perovskite phase, MASbSI 2 (MA = CH 3 NH 3 + ), and instead that the main products are a mixture of the binary and ternary compounds (Sb 2 S 3 and MA 3 Sb 2 I 9 ). Density functional theory calculations also indicate that such a mixed sulfide and iodide perovskite phase should be thermodynamically less stable compared with binary/ternary anion-segregated secondary phases and less likely to be synthesized under equilibrium conditions. Additionally, band structure calculations show that this mixed sulfide and iodide phase, if possible to synthesize (e.g., under nonequilibrium conditions), should have a suitable direct band gap for photovoltaic application.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Chalcogenide Aerogels as Sorbents for Noble Gases (Xe, Kr)

High surface MoS x and SbS x chalcogels were studied for Xe/Kr gas separation. Here, the intrinsic soft character of the chalcogel framework is a unique property among the large family of porous materials and offers a potential new approach towards the selective separation of Xe over Kr. Among these chalcogels, MoS x shows the highest Xe and Kr uptake, reaching 0.69 mmol g -1 (1.05 mmol cm -3 ) and 0.28 mmol g -1 (0.42 mmol cm -3 ) respectively, at 273 K and 1 bar. The corresponding isosteric heat of adsorption at zero coverage (Q st 0 ) is 22.8 and 18.6 kJ mol -1 and both are the highest among the selected chalcogels. The IAST (10:90) Xe/Kr selectivity at 273 K for MoS x is 6.0 while for SbS x chalcogels varies in the range 2.0-2.8. The higher formal charge of molybdenum, Mo 4+ , in MoS x versus that of antimony, Sb 3+ , in SbS x coupled with its larger atomic size could induce higher polarizability in the MoS x framework and therefore higher Xe/Kr selectivity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

First-Row Transition Metal Antimonates for the Oxygen Reduction Reaction

The development of inexpensive and abundant catalysts with high activity, selectivity, and stability for the oxygen reduction reaction (ORR) is imperative for the widespread implementation of fuel cell devices. Herein, we present a combined theoretical–experimental approach to discover and design first-row transition metal antimonates as excellent electrocatalytic materials for the ORR. Theoretically, we identify first-row transition metal antimonates–MSb 2 O 6 , where M = Mn, Fe, Co, and Ni–as nonprecious metal catalysts with good oxygen binding energetics, conductivity, thermodynamic phase stability, and aqueous stability. Among the considered antimonates, MnSb 2 O 6 shows the highest theoretical ORR activity based on the 4e – ORR kinetic volcano. Experimentally, nanoparticulate transition metal antimonate catalysts are found to have a minimum of a 2.5-fold enhancement in intrinsic mass activity (on transition metal mass basis) relative to the corresponding transition metal oxide at 0.7 V vs RHE in 0.1 M KOH. MnSb 2 O 6 is the most active catalyst under these conditions, with a 3.5-fold enhancement on a per Mn mass activity basis and 25-fold enhancement on a surface area basis over its antimony-free counterpart. Electrocatalytic and material stability are demonstrated over a 5 h chronopotentiometry experiment in the stability window identified by theoretical Pourbaix analysis. Furthermore, this study further highlights the stable and electrically conductive antimonate structure as a framework to tune the activity and selectivity of nonprecious metal oxide active sites for ORR catalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Photoresponse of Natural van der Waals Heterostructures

Van der Waals heterostructures consisting of two-dimensional materials offer a platform to obtain materials by design and are very attractive owing to unique electronic states. Research on 2D van der Waals heterostructures (vdWH) has so far been focused on fabricating individually stacked atomically thin unary or binary crystals. Such systems include graphene, hexagonal boron nitride, and members of the transition metal dichalcogenide family. In this paper, we present our experimental study of the optoelectronic properties of a naturally occurring vdWH, known as franckeite, which is a complex layered crystal composed of lead, tin, antimony, iron, and sulfur. We present here that thin film franckeite (60 nm < d < 100 nm) behaves as a narrow band gap semiconductor demonstrating a wide-band photoresponse. We have observed the band-edge transition at ~1500 nm (~830 meV) and high external quantum efficiency (EQE ≈ 3%) at room temperature. Laser-power-resolved and temperature-resolved photocurrent measurements reveal that the photocarrier generation and recombination are dominated by continuously distributed trap states within the band gap. To understand wavelength-resolved photocurrent, we also calculated the optical absorption properties via density functional theory. Finally, we have shown that the device has a fast photoresponse with a rise time as fast as ~1 ms. Finally, our study provides a fundamental understanding of the optoelectronic behavior in a complex naturally occurring vdWH, and may pave an avenue toward developing nanoscale optoelectronic devices with tailored properties.

36 MATERIALS SCIENCE↗

Highly Effective GeNi Alloy Contact Diffusion Barrier for BiSbTe Long-Term Thermal Exposure

A GeNi alloy diffusion barrier for contacts on bismuth antimony telluride is proposed. Multiple gold contact diffusion barriers were tested at different thermal aging conditions in air and reducing atmospheres. Among all diffusion barriers, the GeNi alloy barrier shows the best performance for bulk samples with no substantial degradation of the contact resistance, no contact color change, and no change of thermoelectric properties. We observed D Au–GeNi = (9.8 ± 2.7) × 10 –20 m 2 /s within the GeNi alloy barrier, which is 4 times smaller than D Au–BiSbTe . The presence of the initial Ge layer also proves to be effective in reducing nickel diffusion yielding D Ni–BiSbTe = (8.57 ± 0.49) × 10 –19 m 2 /s. During GeNi alloy formation, Ge diffusion into BiSbTe produces GeTe, which apparently blocks the van der Waals gaps eliminating Au and Ni fast diffusion pathways. Thermal aging of BiSbTe nanowires shows that Au and Ni diffusion degrades the thermoelectric power factor, whereas the GeNi alloy barrier sample is mostly preserved. The GeNi alloy barrier is a reliable solution to long-term thermal applications of BiTe-based materials.

36 MATERIALS SCIENCE↗

Hydrometallurgical recovery of germanium from coal gasification fly ash. Solvent extraction method

This article is concerned with a simple hydrometallurgical method for the selective recovery of germanium from fly ash (FA) generated in an integrated gasification with combined cycle (IGCC) process. The method is based on the leaching of FA with water and a subsequent concentration and selective separation of germanium by a solvent method. Regarding the leaching step, the different operational conditions studied were liquid/solid (L/S) ratio and time of contact. The solvent extraction method was based on germanium complexation with catechol (CAT) in an aqueous solution followed by the extraction of the Ge-CAT complex with an extracting organic reagent diluted in an organic solvent. The main factors examined during the extraction tests were aqueous phase/organic phase (AP/OP) volumetric ratio, aqueous phase pH, amounts of reagents, and time of contact. Germanium extraction yields were higher than 90%. Alkaline and acid stripping of organic extracts were studied obtaining the best results with 1M NaOH (85%). A high-purity germanium solution was obtained. Experimental data presented in this work show that the extraction of germanium by the solvent method designed can be selective toward germanium, and this element can be effectively separated from arsenic, molybdenum, nickel, antimony, vanadium, and zinc.

01 COAL, LIGNITE, AND PEAT↗

New Family of Argyrodite Thioantimonate Lithium Superionic Conductors

We report on a new family of argyrodite lithium superionic conductors, as solid solutions Li 6+x MxSb 1–x S 5 I (M = Si, Ge, Sn), that exhibit superionic conductivity. These represent the first antimony argyrodites to date. Exploration of the series using a combination of single crystal X-ray and synchrotron/neutron powder diffraction, combined with impedance spectroscopy, reveals that an optimal degree of substitution (x), and substituent induces slight S 2– /I – anion site disorder—but more importantly drives Li + cation site disorder. The additional, delocalized Li-ion density is located in new high energy lattice sites that provide intermediate interstitial positions (local minima) for Li + diffusion and activate concerted ion migration, leading to a low activation energy of 0.25 eV. Excellent room temperature ionic conductivity of 14.8 mS·cm –1 is exhibited for cold-pressed pellets—up to 24 mS·cm –1 for sintered pellets—among the highest values reported to date. This enables all-solid-state battery prototypes that exhibit promising properties. Furthermore, even at -78 °C, suitable bulk ionic conductivity of the electrolyte is retained (0.25 mS·cm –1 ). Selected thioantimonate iodides demonstrate good compatibility with Li metal, sustaining over 1000 h of Li stripping/plating at current densities up to 0.6 mA·cm –2 . The significantly enhanced Li ion conduction and lowered activation energy barrier with increasing site disorder reveals an important strategy toward the development of superionic conductors.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗