Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ADSORPTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29

Synthesis, Structure, Adsorption Space and Magnetic Properties of Ni-oxalate Porous Molecular Magnet

Here, we synthesized about sixty metal organic materials. Only three were metal organic frameworks (MOFs). One of them was a porous molecular magnet (PMM). For the PMM synthesis Ni was the node, oxalic acid the organic linker and DMF the solvent and shaping molecule. This PMM was studied with DRIFTS, Raman spectrometry, TGA, XRD, adsorption and with a VSM. TGA and adsorption data indicated that a microporous material with a pore volume, W = 0.10 ± 0.01 cm 3 /g was obtained. Furthermore, the analysis of the XRD profile indicated that it is a layered compound. The DRIFTS, Raman and XRD data revealed that each layer is formed by nickel cations linked by bis-bidentate and bridging-bis-bidentate oxalate ligands and the DMF molecules are perpendicularly linked to the nickel cations to produce stacking. Additionally, the Raman data allowed us to propose that the nickel cations are located in octahedral and pentacoordinated sites as Ni 2+ and Ni 3+ . The Pawley fitting of the XRD profiles pointed out that the hydrated sample crystallizes in the P2/m space group. The cell parameters calculated are consistent with the proposed structure. Two different adsorption states showing different adsorption energies, in the physical adsorption range, were observed. The small amount estimated for the dispersive and quadrupole adsorption interaction energies was a confirmation of the proposed layered structure. The VSM study yielded an effective magnetic moment, μ eff = 4.9 μ B . Our figure is consistent with nickel located in octahedral and pentacoordinated sites as Ni 2+ and Ni 3+ . We had then obtained a new Ni-oxalic porous molecular magnet (Ni-Ox-PMM). The significance of this PMM is related to its porosity, that is, during degassing it release water turning into a porous stable structure, showing notable magnetic properties. In this case been porous, it means that the electronic structure of the nickel cations can be manipulated from outside with adsorbed molecules. Thereafter, the material could sense small molecules.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Removal of Radionuclides from Waste Water at Fukushima Daiichi Nuclear Power Plant: Desalination and Adsorption Methods - 13126

Waste water containing high levels of radionuclides due to the Fukushima Daiichi Nuclear Power Plant accident, has been treated by the adsorption removal and reverse-osmosis (RO) desalination to allow water re-use for cooling the reactors. Radionuclides in the waste water are collected in the adsorbent medium and the RO concentrate (RO brine) in the water treatment system currently operated at the Fukushima Daiichi site. In this paper, we have studied the behavior of radionuclides in the presently applied RO desalination system and the removal of radionuclides in possible additional adsorption systems for the Fukushima Daiichi waste water treatment. Regarding the RO desalination system, decontamination factors (DFs) of the elements present in the waste water were obtained by lab-scale testing using an RO unit and simulated waste water with non-radioactive elements. The results of the lab-scale testing using representative elements showed that the DF for each element depended on its hydrated ionic radius: the larger the hydrated ionic radius of the element, the higher its DF is. Thus, the DF of each element in the waste water could be estimated based on its hydrated ionic radius. For the adsorption system to remove radionuclides more effectively, we studied adsorption behavior of typical elements, such as radioactive cesium and strontium, by various kinds of adsorbents using batch and column testing. We used batch testing to measure distribution coefficients (K{sub d}s) for cesium and strontium onto adsorbents under different brine concentrations that simulated waste water conditions at the Fukushima Daiichi site. For cesium adsorbents, K{sub d}s with different dependency on the brine concentration were observed based on the mechanism of cesium adsorption. As for strontium, K{sub d}s decreased as the brine concentration increased for any adsorbents which adsorbed strontium by intercalation and by ion exchange. The adsorbent titanium oxide had higher K{sub d}s and it was used for the column testing to obtain breakthrough curves under various conditions of pH and brine concentration. The breakthrough point had a dependency on pH and the brine concentration. We found that when the pH was higher or the brine concentration was lower, the longer it took to reach the breakthrough point. The inhibition of strontium adsorption by alkali earth metals would be diminished for conditions of higher pH and lower brine concentration. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Evaluation of Adsorption Properties for Cs and Sr Selective Adsorbents-13171

The development of effective treatment and disposal methods is very urgent and important subject. Tohoku University and UNION SHOWA have developed various selective adsorbents (zeolites, zeolite sheets and composites loaded with insoluble ferrocyanides) for the effective decontamination of radioactive Cs{sup +} and Sr{sup 2+} As for Cs{sup +} adsorption, CST, chabazite and insoluble ferrocyanides composites had relatively large distribution coefficients (K{sub d}) above 10{sup 3} cm{sup 3}/g and excellent adsorption kinetics in seawater. Even after high temperature calcination at 1,100 deg. C, cesium was still immobilized in the calcined products of Cs{sup +}-zeolites, suggesting high immobilization ability of zeolites for Cs{sup +}. As for Sr{sup 2+} adsorption, A and X zeolites had relatively large K{sub d} values around 10{sup 2} cm{sup 3}/g, and zeolite sheet (A zeolite) exhibited excellent adsorption kinetics in seawater. Considering the decontamination of radioactive Sr{sup 2+} in groundwater, the effects of Ca{sup 2+} and Mg{sup 2+} ions on the K{sub d} value of Sr{sup 2+} were further examined by batch method. The K{sub d} value of Sr{sup 2+} was almost independent of Mg{sup 2+} concentration up to 2,500 ppm, while gradually lowered in the presence of Ca{sup 2+} above 200 ppm, due to the differences in the ionic radius of hydrated ion. The Cs{sup +} and Sr{sup 2+} adsorption ability for KNiFC-A (composite of A zeolite loaded with insoluble ferrocyanides) was examined by batch method. Here the matrix of composite (A zeolite) and loaded ferrocyanides (KNiFC) have high selectivity towards Sr{sup 2+} and Cs{sup +}, respectively. The K{sub d} values of Sr{sup 2+} and Cs{sup +} in seawater were estimated to be above 10{sup 2} and 10{sup 3} cm{sup 3}/g, respectively, indicating the effectiveness for the decontamination of both Sr{sup 2+} and Cs{sup +}. The basic data on the Cs{sup +} and Sr{sup 2+} adsorption properties for selective adsorbents are effective for the practical decontamination processes of these metal ions in seawater and groundwater. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Probing basal planes and edge sites in polygranular nuclear graphite by gas adsorption: Estimation of active surface area

Polygranular nuclear graphite, manufactured at 2800–3000 °C from a carbonized filler and binder mix, has high graphitization degree, crystalline structure close to perfect graphite, and about 20% porosity. The pore surfaces expose large regions of rough, defective prismatic edges of graphite crystallites which are the locus of graphite materials surface sites active for oxidation, chemisorption, and electron transfer. However, we show that high-resolution N 2 and Kr first monolayer adsorption on polygranular graphite (P/P 0 < 0.015) occurs in many ways like adsorption on graphitized carbon blacks. This proves the presence of energetically homogeneous basal planes domains in graphite porosity, which was not fully acknowledged before. Using classical analysis methods (Langmuir, Hill-de Boer, adsorption potential distribution) we quantity the basal plane area (BPA) of several polygranular graphite types and correlate it with their microstructure. Finally, we propose that gas adsorption is uniquely positioned to reliably estimate the active surface area of graphite by subtracting BPA from the BET total surface area. Direct estimation based on adsorption is preferable to indirect calculations based on microstructural information.

36 MATERIALS SCIENCE↗

Adsorption and diffusion of carbon dioxide on metal-organic framework (MOF-5)

Adsorption equilibrium and diffusion of CO{sub 2} on microporous metal-organic frameworks (MOF-5, or IRMOF-1) crystals were experimentally studied by the gravimetric method in the pressure range up to 1 atm. The MOF-5 crystal cubes of about 40-60 {mu} m in sizes were synthesized by the solvothermal method. Freundlich adsorption isotherm equation can fit well CO{sub 2} adsorption isotherms on MOF-5, with isosteric heat of adsorption of about 34 kJ/mol. Diffusion coefficient of CO{sub 2} in the MOF-5 is in the range of 8.1-11.5 x 10{sup -9} cm{sup 2}/s in 295-331K with activation energy of 7.61 kJ/mol. MOF-5 offers attractive adsorption properties as an adsorbent for separation of CO{sub 2} from flue gas.

01 COAL, LIGNITE, AND PEAT↗

Generalization of thermodynamic Langmuir isotherm for mixed‐gas adsorption equilibria

Abstract This work presents a comprehensive thermodynamic model for both pure component isotherms and mixed‐gas adsorption equilibria. A generalization of thermodynamic Langmuir isotherm, the proposed model assumes competitive adsorption of multiple adsorbates on adsorbent surface for mixed‐gas adsorption equilibria, and it applies an area‐based adsorption nonrandom two‐liquid activity coefficient model in the activity coefficient calculations for the adsorbate phase. The resulting generalized Langmuir isotherm properly captures both surface loading dependence and adsorbate phase composition dependence for mixed‐gas adsorption equilibria. The model is validated with accurate representations of gas adsorption equilibrium data for varieties of unary, binary, and ternary gas systems. The model results are further compared with those calculated from extended Langmuir isotherm and Ideal Adsorbed Solution Theory.

Hamid, Usman↗

Modeling salt adsorption in electrical double layer for capacitive deionization

Abstract This work presents an electrical double layer (EDL) model for capacitive deionization (CDI) by intercorrelating the salt adsorption, the electrode voltage, and the surface charge density. The counterion condensation is considered a crucial contribution to salt adsorption because of the high surface charge density in the charged micropores. The counterions condense when the surface charge density exceeds a critical value, which is predicted by the counterion condensation theory. The EDL model accurately correlates the NaCl salt adsorption and electrode voltage with various surface charge densities and well predicts the salt adsorption in a wide range of external salt concentrations. The EDL model reproduces the non‐monotonic relationship between the salt adsorption and the specific surface area observed in experiments and provides an explanation from the modeling perspective. Exhibiting superior accuracy and predictability for salt adsorption, the EDL model could serve as an enabling tool contributing to the development of CDI processes.

Lin, Yu‐Jeng↗

Porous Covalent Organic Polymers for Efficient Fluorocarbon‐Based Adsorption Cooling

Abstract Adsorption‐based cooling is an energy‐efficient renewable‐energy technology that can be driven using low‐grade industrial waste heat and/or solar heat. Here, we report the first exploration of fluorocarbon adsorption using porous covalent organic polymers (COPs) for this cooling application. High fluorocarbon R134a equilibrium capacities and unique overall linear‐shaped isotherms are revealed for the materials, namely COP‐2 and COP‐3. The key role of mesoporous defects on this unusual adsorption behavior was demonstrated by molecular simulations based on atomistic defect‐containing models built for both porous COPs. Analysis of simulated R134a adsorption isotherms for various defect‐containing atomistic models of the COPs shows a direct correlation between higher fluorocarbon adsorption capacities and increasing pore volumes induced by defects. Combined with their high porosities, excellent reversibility, fast kinetics, and large operating window, these defect‐containing porous COPs are promising for adsorption‐based cooling applications.

Zheng, Jian↗

Oxygen‐Assisted Supercapacitive Swing Adsorption of Carbon Dioxide

Abstract We report on the supercapacitive swing adsorption (SSA) of carbon dioxide at different voltage windows in the presence of oxygen using activated carbon electrodes, and deliquescent, aqueous electrolytes. The presence of O 2 in the CO 2 /N 2 gas mixture results in an up to 11 times higher CO 2 adsorption capacity with 3 M MgBr 2 (at 0.6 V) and up to 4–5 times higher adsorption capacity with 3 M MgCl 2 (at 1 V). A tradeoff between high CO 2 adsorption capacities and lower coulombic efficiencies was observed at voltages above 0.6 V. The energetic and adsorptive performance of the electrodes in the presence of oxygen below 0.5 V was similar to the performance with a CO 2 /N 2 mixture without oxygen at 1 V. Cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) of the electrodes demonstrate that the specific capacitance increases while the diffusion resistance decreases in the presence of oxygen. Oxygen concentrations ranging between 5–20 % give similar energetic and adsorptive performance. The electrodes exhibit stable performance for up to 100 cycles of operation.

Bilal, Muhammad↗

Porous Covalent Organic Polymers for efficient Fluorocarbon-based Adsorption Cooling

Adsorption-based cooling is an energy-efficient renewable-energy technology that can be driven using low-grade industrial waste heat and/or solar heat. Here, we report the first exploration of fluorocarbon adsorption using porous covalent organic polymers (COPs) for this cooling application. High fluorocarbon R134a equilibrium capacities and unique overall linear-shaped isotherms are revealed for the materials, namely COP-2 and COP-3. The key role of mesoporous defects on this unusual adsorption behavior was demonstrated by molecular simulations based on atomistic defect-containing models built for both porous COPs. Analysis of simulated R134a adsorption isotherms for various defect-containing atomistic models of the COPs shows a direct correlation between higher fluorocarbon adsorption capacities and increasing pore volumes induced by defects. Combined with their high porosities, excellent reversibility, fast kinetics, and large operating window, these defect-containing porous COPs are promising for adsorption-based cooling applications.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Oxygen‐Assisted Supercapacitive Swing Adsorption of Carbon Dioxide

We report on the supercapacitive swing adsorption (SSA) of carbon dioxide at different voltage windows in the presence of oxygen using activated carbon electrodes, and deliquescent, aqueous electrolytes. The presence of O 2 in the CO 2 /N 2 gas mixture results in an up to 11 times higher CO 2 adsorption capacity with 3 M MgBr 2 (at 0.6 V) and up to 4–5 times higher adsorption capacity with 3 M MgCl 2 (at 1 V). A tradeoff between high CO 2 adsorption capacities and lower coulombic efficiencies was observed at voltages above 0.6 V. The energetic and adsorptive performance of the electrodes in the presence of oxygen below 0.5 V was similar to the performance with a CO 2 /N 2 mixture without oxygen at 1 V. Cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) of the electrodes demonstrate that the specific capacitance increases while the diffusion resistance decreases in the presence of oxygen. Oxygen concentrations ranging between 5–20 % give similar energetic and adsorptive performance. The electrodes exhibit stable performance for up to 100 cycles of operation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Highly efficient separation membrane based on cellulose acetate/chitosan fibrous composite substrate with activated carbon functional adsorption layer

Abstract BACKGROUND For improving the permeability and selectivity of adsorption separation membranes, membrane materials, structural morphology and separation technology must continue to be investigated. Development of a membrane that is environmentally friendly, cost‐effective and with high filter precision is an important direction in current research. RESULTS The air pressure spraying method was used to prepare an activated carbon (AC)–cellulose acetate/chitosan (CA/CS) composite membrane. The CA/CS fiber composite membrane was prepared as substrate layer, and AC was loaded on the surface of the CA/CS composite membrane as a functional adsorption layer. When the spraying pressure was 0.01 MPa and the mass ratio of AC/CS was 2:1, a composite membrane with even and compact morphology could be obtained. Both the compact AC functional layer and complete CA/CS substrate layer endowed the AC–CA/CS composite membrane with an excellent water filtration property. At low feeding pressure, the permeate flux and rejection rate of bisphenol A (BPA) could reach 9.27 × 10 3 L m −2 h −1 and 98.31%, respectively. Meanwhile, the adsorption capacities of the membrane were investigated. It tended to equilibrate quickly in 2 min for dyes and BPA. The equilibrium adsorption capacities of the membrane for acid blue, acid yellow and BPA were 175.80, 164.0815 and 79.58 mg g −1 , respectively. The adsorption process conformed to pseudo‐second‐order kinetics and the Langmuir monolayer adsorption model. CONCLUSIONS This work could provide a practical and effective feasibility for membrane separation technology. © 2020 Society of Chemical Industry (SCI)

Zhao, Xiaoyan↗

Adsorption Efficiency of Polyaspartate-Montmorillonite Composite Towards the Removal of Pb(II) and Cd(II) from Aqueous Solution

The selective modification of sodium montmorillonite (Na{sup +}-Mt) surface with polyionene followed by poly (succinimde-co-aspartate) has been considered. Na{sup +}-Mt was allowed to react with well characterized polyionene in two fold excess. The resulting polyionene/Mt (IC) was further modified with poly (succinimide-co-aspartate) through an ion exchange process. The obtained polyaspartate/Mt (IPS) composite was characterized by elemental analysis, X-ray diffraction, FTIR spectroscopy, thermogravimetric analysis (TGA), scanning electron microscopy (SEM), and BET surface analyzer. The adsorption efficiency of IPS composite was investigated for the removal of Pb(II) and Cd(II) from aqueous solution under different experimental conditions including initial metal ions concentration, temperature and single and binary mixture systems of metal ions. The experimental data were analyzed by Langmuir, Freundlich, Temkin, and Dubinin-Radushkevich models. Langmuir model reveals that the monolayer adsorption capacity of IPS was 92.59 and 67.57 mg/g for Pb(II) and Cd(II), respectively. The modification of parent Na{sup +}-Mt enhanced their adsorption capacity by about 87.91 and 29.84% for Pb(II) and Cd(II), respectively, due to inclusion of extra active sites of polyaspartate. The mean sorption energy, E calculated from Dubinin–Radushkevich isotherm were 2.75 and 1.98 kJ/mol for the adsorption of Pb(II) and Cd(II), respectively, indicating physical adsorption process. Also, The thermodynamic parameters were calculated and indicated that the adsorption was spontaneous and exothermic process. The mechanism of cation exchange and complexation of metal ions was suggested. IPS composite has a considerable potential for the removal of heavy metal ions from aqueous solution and wastewater stream.

36 MATERIALS SCIENCE↗

Effective Adsorption of Cr(VI) by High Strength Chitosan/Montmorillonite Composite Hydrogels Involving Spirulina Biomass/Microalgae

The “3-in-1 type” biopolymer composite (chitosan/montmorillonite clay/biosorbent) hydrogels were produced and used as adsorbents for Cr(VI) ion. Na-Montmorillonite (NaMMT) clay was modified with Spirulina (Sp) biosorbent by using lyophilization based “cryoscopic expansion” (C-XP) method. The Sp immobilized MMT (SpMMT) clay containing hydrogels were found to have an open/extended form of Sp structure on their pores’ walls, presenting all possible receptor groups for adsorption of Cr(VI) ions. SpMMT loaded hydrogels showed higher adsorption capacities than NaMMT loaded ones. The physically crosslinked hydrogel including only 1% SpMMT (1SpM-H) clay exhibited 150% higher adsorption capacity as compared to neat chitosan hydrogel even in 50 ppm Cr(VI) solution. The same composite hydrogel was found to adsorp about 780% Cr(VI) with respect to the clay’s weight while individual uses of Sp and MMT can remove only about 4.80 and 0.36% Cr(VI) with respect to their weights. The pseudo-first order model was found to be the most suitable for the kinetic data of NaMMT loaded hydrogels while that of SpMMT containing hydrogels followed the pseudo-second order kinetics. The isotherm data of all the hydrogels exhibited a better fit to the Freundlich and Sips model. The maximum adsorption capacity (3333 mg g{sup −1}) calculated by Sips model was achieved via the hydrogel having 1% SpMMT which is in good agreement with the experimental kinetic data. The highest adsorption with the lowest amount of SpMMT clay could be attributed to its looser Sp network structure whose functional groups are in long-distance, releasing more adsorption sites for the Cr(VI). The highest compression modulus and toughness were also obtained with the 1SpM-H hydrogel which is probably due to increased physical and reversible interactions between chitosan molecules and SpMMT clay layers at optimum clay loading (1%).

60 APPLIED LIFE SCIENCES↗

Water-soluble drug partitioning and adsorption in HEMA/MAA hydrogels

Two-photon confocal microscopy and back extraction with UV/Vis-absorption spectrophotometry quantify equilibrium partition coefficients, k, for six prototypical drugs in five soft-contact-lens-material hydrogels over a range of water contents from 40 to 92%. Partition coefficients were obtained for acetazolamide, caffeine, hydrocortisone, Oregon Green 488, sodium fluorescein, and theophylline in 2-hydroxyethyl methacrylate/methacrylic acid (HEMA/MAA, pK a ≈ 5.2) copolymer hydrogels as functions of composition, aqueous pH (2 and 7.4), and salinity. At pH 2, the hydrogels are nonionic, whereas at pH 7.4, hydrogels are anionic due to MAA ionization. Solute adsorption on and nonspecific electrostatic interaction with the polymer matrix are pronounced. To express deviation from ideal partitioning, we define an enhancement or exclusion factor, E≡k/φ 1 , where φ 1 is hydrogel water volume fraction. All solutes exhibit E>1 in 100wt % HEMA hydrogels owing to strong specific adsorption to HEMA strands. For all solutes, E significantly decreases upon incorporation of anionic MAA into the hydrogel due to lack of adsorption onto charged MAA moieties. For dianionic sodium fluorescein and Oregon Green 488, and partially ionized monoanionic acetazolamide at pH 7.4, however, the decrease in E is more severe than that for similar-sized nonionic solutes. Conversely, at pH 2, E generally increases with addition of the nonionic MAA copolymer due to strong preferential adsorption to the uncharged carboxylic-acid group of MAA. For all cases, we quantitatively predict enhancement factors for the six drugs using only independently obtained parameters. In dilute solution for solute i , E i is conveniently expressed as a product of individual enhancement factors for size exclusion (E$_i^{ex}$), electrostatic interaction (E$_i^{el}$), and specific adsorption (E$_i^{ad}$):E$_i$≡E$_i^{ex}$E$_i^{el}$E$_i^{ad}$. Finally, to obtain the individual enhancement factors, we employ an extended Ogston mesh-size distribution for Eiex; Donnan equilibrium for E$_i^{el}$; and Henry's law characterizing specific adsorption to the polymer chains for E$_i^{ad}$. Predicted enhancement factors are in excellent agreement with experiment.

back extraction↗

Optimization of fluorescence and surface adsorption of citric acid/ethanolamine carbon nanoparticles for subsurface tracers

The tunable fluorescence and biocompatibility of fluorescent carbon nanoparticles (FCNs) makes them appealing tracers in geothermal, environmental, and clinical applications. Here, we address FCNs synthesized from reaction and pyrolysis of citric acid and ethanolamine. We examine the fluorescence and the adsorption of these FCNs as critical parameters that influence their use in applications. FCN fluorescence was observed to develop during pyrolysis and measured at pyrolysis temperatures ranging from 190 to 250 °C. Transmission electron microscopy shows that the FCN average diameter of approximately 13 nm is unaffected by pyrolysis temperature. However, pyrolysis temperature strongly affects fluorescence, which peaks at 210 °C. Here, the surface hydrophobicity of the FCNs increases with pyrolysis temperature as measured by retention on reverse phase chromatography. Together, these results suggest that particle surface functionalities provide both fluorescence and hydrophilicity, and that these surface functionalities are destroyed with excessive pyrolysis. To examine their surface adsorption, quartz crystal microbalance measurements demonstrate that pyrolysis temperature increases FCN adsorption on mineral surfaces. Surfaces with greater hydrophobicity show greater FCN adsorption. Adsorption is unaffected by the presence of mono- or divalent ions in solution. This suggests adsorption by hydrophobic interaction for the Fe 2 O 3 , SiO 2 , and AlSiO surfaces studied.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Water and Carbon Dioxide Adsorption at Olivine Surfaces

Plane-wave density functional theory (DFT) calculations were performed to simulate water and carbon dioxide adsorption at the (010) surface of five olivine minerals, namely, forsterite (Mg2SiO4), calcio-olivine (Ca2SiO4), tephroite (Mn2SiO4), fayalite (Fe2SiO4), and Co-olivine (Co2SiO4). Adsorption energies per water molecule obtained from energy minimizations varied from -78 kJ mol-1 for fayalite to -128 kJ mol-1 for calcio-olivine at sub-monolayer coverage and became less exothermic as coverage increased. In contrast, carbon dioxide adsorption energies at sub-monolayer coverage ranged from -20 kJ mol-1 for fayalite to -59 kJ mol-1 for calcio-olivine. Therefore, the DFT calculations show a strong driving force for carbon dioxide displacement by water at the surface of all olivine minerals in a competitive adsorption scenario. Additionally, adsorption energies for both water and carbon dioxide were found to be more exothermic for the alkaline-earth (AE) olivines than for the transition-metal (TM) olivines and to not correlate with the solvation enthalpies of the corresponding divalent cations. However, a correlation was obtained with the charge of the surface divalent cation indicating that the more ionic character of the AE cations in the olivine structure relative to the TM cations leads to greater interactions with adsorbed water and carbon dioxide molecules at the surface and thus more exothermic adsorption energies for the AE olivines. For calcio-olivine, which exhibits the highest divalent cation charge of the five olivines, ab initio molecular dynamics simulations showed that this effect leads both water and carbon dioxide to react with the surface and form hydroxyl groups and a carbonate-like species, respectively.

ab initio molecular dynamics↗

Removal of priority and emerging pollutants from aqueous media by adsorption onto synthetic organo-funtionalized high-charge swelling micas

Highlights: • Adsorption occurs in the interlayer space (C{sub 18}-Mica-4: 49.9 Å). • Pollutants remained sorbed into C{sub 18}-Mica-4 at least 7 days after treatment. • No sample pH adjustment neither NaCl addition is required. • Removal rates from 70% to 100% for most of the 18 pollutants in 24 h. • Applicability to wastewater, surface and tap water samples demonstrated. In this work, the removal of different types of emerging pollutants (four perfluoroalkyl compounds, two preservatives, three surfactants and nine pharmaceutical compounds) from aqueous solution by adsorption onto two novel synthetic clays, a high-charge swelling mica (Na-Mica-4) and an organo-functionalized mica (C{sub 18}-Mica−4), was evaluated. Na-Mica-4 and C{sub 18}-Mica− 4 were prepared and characterized by X-Ray diffraction, Zeta potential, specific surface area, thermogravimetric analysis and transmission electron microscopy, before and after adsorption experiments. The influence of the aqueous sample pH, salt addition and extraction time in the removal were evaluated. The results showed the high adsorption affinity of C{sub 18}-Mica-4 for most of the emerging pollutants analysed after a removal time of 24 h (14 out of 18 pollutants were effectively removed [70–100%]). A high correlation was observed between the log K{sub ow} of the selected emerging pollutants and the adsorption onto C{sub 18}-Mica-4. The results also indicate that adsorption occurs in the interlayer space. While the removal rates with Na-Mica-4 were in the range 8–97% after seven days, some of the compounds, perfluorobutanoic acid and most of pharmaceutically active compounds, were not adsorbed onto the high-charge mica. C{sub 18}-Mica− 4 was effectively used for the removal of contaminants from four types of water samples.

54 ENVIRONMENTAL SCIENCES↗