Onset of rotating disturbance in linear Hall- current accelerator
Near cathode magnetic field effect on instability in linear Hall current accelerators, using geometry of field extending from anode to cathode region
Allario, F.↗
SEARCH · Engineering Papers
Results for “ACCELERATOR MAGNETS”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The Role of Three-dimensional Effects on Ion Injection and Acceleration in Perpendicular Shocks
Understanding the conditions that enable particle acceleration at nonrelativistic collisionless shocks is essential to unveil the origin of cosmic rays. We employ 2D and 3D hybrid simulations (with kinetic ions and fluid electrons) to explore particle acceleration and magnetic field amplification in nonrelativistic perpendicular shocks, focusing on the role of shock drift acceleration and its dependence on the shock Mach number. We perform an analysis of the ion injection process and demonstrate why efficient acceleration is only observed in 3D. In particular, we show that ion injection critically depends on the “porosity” of the magnetic turbulence in the downstream region near the shock, a property describing how easily the postshock region allows particles to traverse it and return upstream without being trapped. This effect can only be properly captured in 3D. Additionally, we explore the impact of numerical resolution on ion energization, highlighting how resolving small-scale turbulence—on scales below the thermal ion gyroradius—is essential for accurately modeling particle injection. Overall, our results emphasize the necessity of high-resolution 3D simulations to capture the fundamental microphysics driving particle acceleration at perpendicular shocks.
Orusa, Luca [Princeton Univ., NJ (United States); ↗
Magnetic field, reconnection, and particle acceleration in extragalactic jets
Extra-galactic radio jets are investigated theoretically taking into account that the jet magnetic field is dragged out from the central rotating source by the jet flow. Thus, magnetohydrodynamic models of jets are considered with zero net poloidal current and flux, and consequently a predominantly toroidal magnetic field. The magnetic field naturally has a cylindrical neutral layer. Collisionless reconnection of the magnetic field in the vicinity of the neutral layer acts to generate a non-axisymmetric radial magnetic field. In turn, axial shear-stretching of reconnected toroidal field gives rise to a significant axial magnetic field if the flow energy-density is larger than the energy-density of the magnetic field. This can lead to jets with an apparent longitudinal magnetic field as observed in the Fanaroff-Riley class II jets. In the opposite limit, where the field energy-density is large, the field remains mainly toroidal as observed in Fanaroff-Riley class I jets. Driven collisionless reconnection at neutral layers may lead to acceleration of electrons to relativistic energies in the weak electrostatic field of the neutral layer. A simple model is discussed for particle acceleration at neutral layers in electron/positron and electron/proton plasmas.
Romanova, M. M.↗
Magnetic Materials Characterization and Modeling for the Enhanced Design of Magnetic Shielding of Cryomodules in Particle Accelerators
Particle accelerators produce beams of high-energy particles, which are used for both fundamental and applied scientific research and are critical to the development of accelerator driven sub-critical reactor systems. An effective magnetic shield is very important to achieve higher quality factor (Qo) of the cryomodule of a particle accelerator. The allowed value of field inside the cavity due to all external fields (particularly the Earth’s magnetic field) is ~15 mG or less. The goal of this PhD dissertation is to comprehensively study the magnetic properties of commonly used magnetic shielding materials at both cryogenic and room temperatures. This knowledge can be used for the enhanced design of magnetic shields of cryomodes (CM) in particle accelerators. To this end, we first studied the temperature dependent magnetization behavior (M-H curves) of Amumetal and A4K under different annealing and deformation conditions. This characterized the effect of stress or deformation induced during the manufacturing processes and subsequent restoration of high permeability with appropriate heat treatment. Next, an energy based stochastic model for temperature dependent anhysteretic magnetization behavior of ferromagnetic materials was proposed and benchmarked against experimental data. We show that this model is able to simulate and explain the magnetic behavior of as rolled, deformed and annealed amumetal and A4K over a large range of temperatures. The experimental results for permeability are then used in a finite element model (FEM) in COMSOL to evaluate the shielding effectiveness of multiple shield designs at room temperature as well as cryogenic temperature. This work could serve as a guideline for future design, development and fabrication of magnetic shields of CMs.
Sah, Sanjay↗
QXFA 167 Coil Fabrication Report
QXFA is a cosine theta coil used in the MQXFA, a Nb3Sn superconducting accelerator quadrupole magnet to be installed in the High-Luminosity LHC Interaction Regions. A series of MQXFA magnets is fabricated and tested by the US High-Luminosity LHC Accelerator Upgrade Project (AUP). This report details the fabrication process of the QXFA coil (QXFA 167) using Wind-and-React method, conducted from February 6 to March 20, 2025. The content covers coil winding, curing, and reaction, based on the travelers of FNAL as well as the observations and records by the author. The coil fabrication processes following heat reaction, including the impregnation process, are not covered in this report, as they were carried out after March 20.
43 PARTICLE ACCELERATORS↗
Solar Terrestrial Physics: Present and Future
The following topics relating to solar-terrestrial interactions are considered: (1) reconnection of magnetic fields; (2) particle acceleration; (3) solar magnetic flux; (4) magnetohydrodynamic waves and turbulence in the Sun and interplanetary medium; (5) coupling of the solar wind to the magnetosphere; (6) coronal transients; (7) the connection between the magnetosphere and ionosphere; (8) substorms in the magnetosphere; (9) solar flares and the solar terrestrial environment; (10) shock waves in the solar terrestrial environment; (11) plasma transport and convection at high latitudes; and (12) high latitude ionospheric structure.
Butler, D. M.↗
Superconducting Magnets
Explore the source record for details and available documents.
75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
A state of the art current-septum dipole magnet
Here, the acceleration process of charged particle beams often requires the use of few acceleration stages to provide the beam with the desired energy. The extraction of the beam from one acceleration stage and the injection to the next, both require a special type of magnet which comes under the name septum magnet. Such a magnet generates a strong field in one region and a very low field in another region with the two regions separated by a very thin material (septum). The septum thickness of such a magnet should be as thin as possible to reduce the strength of other devices, like kickers, which are involved in the extraction or injection processes. A thin septum is also advantageous during the slow beam extraction process to reduce the beam losses at the septum. One of the methods which in theory can generate very large differences in field strength in adjacent field regions separated by a thin septum, is the use of two thin parallel current sheets of infinite dimensions. In practice we use other devices that can approximate such an abrupt change of the magnetic field within the septum thickness. In this paper we describe such a device, the DC current septum, we present results from the study of its electromagnetic properties, and we discuss a method to minimize the magnetic field in the region which requires a very small magnetic field. We also provide some results from the experimental measurements of the magnetic field generated by the D6 current septum magnet which is installed in the experimental beam line of the NASA’s Space Radiation Laboratory (NSRL) facility [1],[2] at Brookhaven National Laboratory (BNL). This septum magnet is part of the beam’s extraction system from the AGS-Booster into the NSRL beam line for material and biological studies.
43 PARTICLE ACCELERATORS↗
Particle acceleration near X-type magnetic neutral lines
The behavior of charged particles near X-type magnetic neutral lines is investigated. The magnetic field is taken to be hyperbolic and time stationary, with a uniform electric field perpendicular to the magnetic field. The general properties of the orbits of noninteracting particles in that field geometry are examined. Approximate analytic solutions to the orbit equations are derived by considering a magnetic-insulation picture where there is a hole in the magnetic insulation around the neutral line. Scaling laws for the dependence of the energy gain on strengths of the magnetic and electric fields are derived. The kinetic-energy distribution function for accelerated particles is derived for particles flowing past the neutral line. These analytic derivations are supported by computer simulations, in which the relativistic equations of motion for single test particles are numerically solved and the orbits and kinetic-energy gains of the particles are obtained. A number of simulations were performed and one parameter at a time was varied. Applications of the results to magnetic-neutral-line regions in space physics and astrophysics are possible.
Deeg, Hans-Jorg↗
Linac Sector 21-30 'QE' Quadrupole Magnet Excitation in LCLS Operation
The existing SLAC linac quadrupole magnets, described as the 'QE' quadrupoles, are designed for excitation currents up to 200 A with length-integrated gradients up to 100 kG needed to focus up to 50-GeV electron or positron beams. The eight 'QE' magnets within a linac sector are powered in series on a single 200-A bulk power supply, and each magnet in sectors 21-29 also includes a 20-A booster supply (adds 0-20 A to each magnet) for gradient tapering within the sector. Sector 30 is different again with individual 200-A power supplies per magnet. The LCLS will use these same quadrupole magnets, mostly in their existing locations and with their present power supplies, but for an electron energy range of 0.25-14 GeV. This much lower beam energy will require good power supply regulation ({le} 0.05% rms for f > 0.5 Hz) [1] and accurate field excitation at much lower currents, as low as a few amperes. The present (pre-2006) gradient-to-current polynomials (IVBU) in the SLC database are based on magnetic measurements at excitation currents above 20 A, and are not accurate in extrapolation below about 10 A. For this reason the IVBU polynomials for all 'QE' quadrupoles in sectors 21-30 will be updated in 2007 for LCLS operation. Magnets beyond Q21601 will be updated with a new generic polynomial (with polarity considerations) based on magnetic measurements from zero current all the way up to 200 A, with additional data taken in the 0-20 A range for accuracy in LCLS mode (see Fig. 1). In addition, the first five LCLS 'QE' magnets (Q21201, Q21301, Q21401, Q21501, and Q21601), most of which run at the lowest currents of <3 A, have been individually measured and fitted with a specific polynomial to meet their special settings in LCLS mode. All changes will continue to fully support 30-50 GeV linac operations. This note describes these changes and the method used to arrive at this solution. Regulation tests have already been run on both the bulk and booster power supplies which demonstrate a regulation level below 0.05% rms [1]. Table 2 lists a summary of the gradient-to-current polynomials needed in 2007 for all 'QE' magnets from sector-21 to 30.
43 PARTICLE ACCELERATORS↗
The Mechanism of Electron Injection and Acceleration in Transrelativistic Reconnection
Electron acceleration during magnetic reconnection is thought to play a key role in time-variable high-energy emission from astrophysical systems. By means of particle-in-cell simulations of transrelativistic reconnection, we investigate electron injection and acceleration mechanisms in low-β electron–proton plasmas. We set up a diversity of density and field structures (e.g., X-points and plasmoids) by varying the guide field strength and choosing whether to trigger reconnection or let it spontaneously evolve. We show that the number of X-points and plasmoids controls the efficiency of electron acceleration, with more X-points leading to a higher efficiency. Using on-the-fly acceleration diagnostics, we also show that the nonideal electric fields associated with X-points play a critical role in the first stages of electron acceleration. As a further diagnostic, we include two populations of test particles that selectively experience only certain components of electric fields. We find that the out-of-plane component of the parallel electric field determines the hardness of the high-energy tail of the electron energy distribution. These results further our understanding of electron acceleration in this regime of magnetic reconnection and have implications for realistic models of black hole accretion flows.
79 ASTRONOMY AND ASTROPHYSICS↗
Magneto-Rayleigh-Taylor instability in solid media
A linear analysis of the magneto-Rayleigh-Taylor instability at the interface between a Newtonian fluid and an elastic-plastic solid is performed by considering a uniform magnetic B{sup →}, parallel to the interface, which has diffused into the fluid but not into the solid. It is found that the magnetic field attributes elastic properties to the viscous fluid which enhance the stability region by stabilizing all the perturbation wavelengths shorter than λ{sub 0}∝B{sup 2} for any initial perturbation amplitude. Longer wavelengths are stabilized by the mechanical properties of the solid provided that the initial perturbation wavelength is smaller than a threshold value determined by the yield strength and the shear modulus of the solid. Beyond this threshold, the amplitude grows initially with a growth rate reduced by the solid strength properties. However, such properties do not affect the asymptotic growth rate which is only determined by the magnetic field and the fluid viscosity. The described physical situation intends to resemble some of the features present in recent experiments involving the magnetic shockless acceleration of flyers plates.
70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
Merging of magnetic islands as an efficient accelerator of electrons
In a thin elongated current sheet, it is likely that more than one X-line forms and thus multiple magnetic islands are produced. The islands are then subject to merging. By simulating such a case with a two-dimensional full-particle code, we show that a merger forming a large island produces the most energetic electron population in the system. By setting the lateral extent of the simulation box to be as large as {approx}100 ion inertial lengths, we introduce many (16) small islands in the initial thin current sheet ({approx}1 ion inertial length thickness). Merging of these islands proceeds to leave only two islands in the system. Then, strong electron acceleration is seen upon the final merger that produces the single island in the large simulation box. The most energetic electrons in the system are accelerated at the merging line. The merging line acceleration dominates because the reverse-reconnection facilitating the final merger is in such a strongly driven manner that the associated electric field is an order of magnitude larger than those available upon normal reconnection. Combining the results from additional runs enables us to obtain a scaling law, which suggests a non-negligible role played by merging lines in the observed electron acceleration phenomena.
70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
Explosive X-point collapse in relativistic magnetically dominated plasma
The extreme properties of the gamma-ray flares in the Crab nebula present a clear challenge to our ideas on the nature of particle acceleration in relativistic astrophysical plasma. It seems highly unlikely that standard mechanisms of stochastic type are at work here and hence the attention of theorists has switched to linear acceleration in magnetic reconnection events. In this series of papers, we attempt to develop a theory of explosive magnetic reconnection in highly magnetized relativistic plasma which can explain the extreme parameters of the Crab flares. In the first paper, we focus on the properties of the X-point collapse. Using analytical and numerical methods (fluid and particle-in-cell simulations) we extend Syrovatsky’s classical model of such collapse to the relativistic regime. We find that the collapse can lead to the reconnection rate approaching the speed of light on macroscopic scales. During the collapse, the plasma particles are accelerated by charge-starved electric fields, which can reach (and even exceed) values of the local magnetic field. The explosive stage of reconnection produces non-thermal power-law tails with slopes that depend on the average magnetization $\unicode[STIX]{x1D70E}$ . For sufficiently high magnetizations and vanishing guide field, the non-thermal particle spectrum consists of two components: a low-energy population with soft spectrum that dominates the number census; and a high-energy population with hard spectrum that possesses all the properties needed to explain the Crab flares.
Physics↗
The Role of Magnetic Reconnection in Energizing Protons and Heavier Ions at the Heliospheric Current Sheet
During near-Sun crossings of the heliospheric current sheet (HCS), Parker Solar Probe (PSP) observed populations of high-energy protons and heavier ions, indicating possible energization by magnetic reconnection up to 10 s–100 s keV nucleon −1 . Here we study ion acceleration by magnetic reconnection at the HCS. To estimate ion energization, we solve the Parker transport equation coupled to a large-scale 2D MHD reconnection simulation. We find that multiple ion species develop power-law distributions with both spectral index and high-energy cutoff E max consistent with in situ data. By accounting for the injection physics determined by kinetic simulations, we confirm that the charge-to-mass ratio scales as E max ∝ (Q/M) α with α ∼ 0.8–1.1, approximately consistent with PSP measurements in the broader range α ∼ 0.6–1.7. In the limit where ions are injected at the same energy per nucleon, α can be as low as ∼0.3. These findings further support the role of magnetic reconnection in producing high-energy heavy ions at the HCS.
Murtas, Giulia [West Virginia Univ., Morgantown, W↗
Energy budgets in collisionless magnetic reconnection: Ion heating and bulk acceleration
This paper investigates the energy transfer in the process of collisionless antiparallel magnetic reconnection. Using two-dimensional hybrid simulations, we measure the increase of the bulk and thermal kinetic energies and compare it to the loss of magnetic energy through a contour surrounding the ion decoupling region. It is shown, for both symmetric and asymmetric configurations, that the loss of magnetic energy is not equally partitioned between heating and acceleration. The heating is found to be dominant and the partition ratio depends on the asymptotic parameters, and future investigations will be needed to understand this dependence.
70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
Progress In Plasma Accelerator Development for Dynamic Formation of Plasma Liners
An experimental plasma accelerator for magnetic target fusion (MTF) applications under development at the NASA Marshall Space Flight Center is described. The accelerator is a coaxial pulsed plasma thruster (Figure 1). It has been tested experimentally and plasma jet velocities of approx.50 km/sec have been obtained. The plasma jet has been photographed with 10-ns exposure times to reveal a stable and repeatable plasma structure (Figure 2). Data for velocity profile information has been obtained using light pipes and magnetic probes embedded in the gun walls to record the plasma and current transit respectively at various barrel locations. Preliminary spatially resolved spectral data and magnetic field probe data are also presented. A high speed triggering system has been developed and tested as a means of reducing the gun "jitter". This jitter is being characterized and future work for second generation "ultra-low jitter" gun development is being identified.
Thio, Y. C. Francis↗