Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “yield estimation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Gas-phase Radiolysis in Plutonium Dioxide Powder

A sample of PuO 2 powder undergoes self radiolysis, causing water present in the solid to generate hydrogen, oxygen, and minor species (e.g. H 2 O 2 ). This is a matter of concern for stored PuO 2 , since the gases could react exothermically and rupture the container. In experiments at LANL, most PuO 2 /salt samples generate mostly H 2 , but a few samples generate a mixture of H 2 and O 2 together. In these special cases, the mixture of H 2 and O 2 in the pore volumes of the powder will then be subject to radiolysis, causing the reverse reaction H 2 + O 2 $\Rightarrow$ H 2 O. In order to understand the steady-state quantities of these gases, it is necessary to estimate the amount of energy from the alpha irradiation that drives this reaction. This report outlines one possible approach for this process, yielding a value for the fractional amount of radiation deposited in the gas phase of 294 ppm. This corresponds to the case of a powder with porosity of 78%. We then use a comprehensive chemical kinetics model based on elementary gas phase reactions to calculate the rate of conversion back to water. We estimate a reduction in the H 2 pressure of about 12 kPa/month, which applies only when O 2 is simultaneously present in the gas phase.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Adhesive Bonding of Copper Prepared by Laser-Interference near the Interference Structuring Limits

Adhesive bonding requires adequate surface preparation for ensuring an appropriate joint quality. The interest in adhesive joining has recently expanded to thermal systems having a large number of joints employed for manufacturing and assembly. This study presents surface topology of copper 110 produced by a laser-interference setup that would theoretically yield a periodicity of 1.7 μm, which is near the 1.6–2 μm structuring limit that was estimated based on thermal diffusion length scale for an 8 ns laser pulse. The results show that although the expected periodic interference structuring was not attained, the melt-induced texturing was affected by the laser-interference profile. Single-lap shear tests were performed with specimen surfaces prepared by traditional abrasion and laser-interference structuring methods. Several laser processing parameters, such as the laser spot size, density, number of pulses, and raster speed, were studied. Scanning electron microscope and profilometry measurements were used to characterize the processed surface microstructures. Web-like structures, which indicate widespread melting, were shown to be formed at different processing conditions. Based on the surface topologies investigated, two laser raster speeds were selected to make single-lap-joint specimens. Baseline joints were prepared by abrading joining specimens. The shear-lap strength and displacement at maximum load were shown to be higher by 16.8% and 43.8% for the laser-structured specimens than those of the baseline specimens, respectively. Moreover, the load-displacement curves indicated that the laser-structured joints were more ductile than those without laser-structuring. The increased ductility for the laser-structured joints was found to yield an increase in the energy absorbed during shear-lap testing of approximately of 80–90% over those measured for baseline joints. It is another indicator that laser-interference structuring enhanced the bonding performance of single-lap shear joints.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Approach to Evaluating Reorganization Energies of Interfacial Electrochemical Reactions

Reaction rate coefficients for electron-transfer processes at the electrode–electrolyte interface are commonly estimated by using the Butler–Volmer equation, but their values are inaccurate beyond a few tenths of volts of overpotential. The Marcus–Hush–Chidsey (MHC) formalism yields correct asymptotic behavior of the rate coefficients vs applied overpotential but has complex dependencies on the redox system’s intrinsic parameters, which can be difficult to model or measure. In this work, we bridge the two kinetics formalisms to estimate the reorganization energy, one of the important parameters for the MHC formalism, and investigate its dependence on other intrinsic parameters such as activation barriers, electronic coupling strength, and the density of states of the electrode surface. We examine the sensitivity of the reorganization energy to these parameters, establish some general relationships for accurately predicting rate coefficients using the MHC formalism over a wide range of applied overpotentials, and compare this approach to calculating MHC rate constants with other empirical approaches for the mechanisms of CO 2 reduction on different metal electrode surfaces.

Butler−Volmer↗
DOE OSTI2024

GalaxyFlow: upsampling hydrodynamical simulations for realistic mock stellar catalogues

ABSTRACT Cosmological N-body simulations of galaxies operate at the level of ‘star particles’ with a mass resolution on the scale of thousands of solar masses. Turning these simulations into stellar mock catalogues requires ‘upsampling’ the star particles into individual stars following the same phase-space density. In this paper, we introduce two new upsampling methods. First, we describe GalaxyFlow, a sophisticated upsampling method that utilizes normalizing flows to both estimate the stellar phase-space density and sample from it. Secondly, we improve on existing upsamplers based on adaptive kernel density estimation (KDE), using maximum likelihood estimation to fine-tune the bandwidth for such algorithms in a way that improves both the density estimation accuracy and upsampling results. We demonstrate our upsampling techniques on a neighbourhood of the Solar location in two simulated galaxies: Auriga 6 and h277. Both yield smooth stellar distributions that closely resemble the stellar densities seen in the Gaia DR3 catalogue. Furthermore, we introduce a novel multimodel classifier test to compare the accuracy of different upsampling methods quantitatively. This test confirms that GalaxyFlow more accurately estimates the density of the underlying star particles than methods based on KDE, at the cost of being more computationally intensive.

Lim, Sung Hak (ORCID:0000000330981092)↗
DOE OSTI2020

Investigation of structural effects of aromatic compounds on sooting tendency with mechanistic insight into ethylphenol isomers

Small aromatic molecules with oxygen-containing functional groups are a promising class of fuel additives, as they can be readily sourced from depolymerized lignin. These oxygenated aromatic compounds (OACs) show a lower sooting tendency than aromatic hydrocarbons, but OACs having alkyl groups such as ethylphenol show a higher sooting tendency than other OACs such as phenol and anisole, despite the oxygen moiety. In this study, we investigate the relationship between chemical structure and soot precursor formation to explain observed differences in the sooting tendency of OACs and to gain insight into how alkyl or oxygenated substituents on the aromatic ring affect soot precursor formation. The weakest bond for 15 aromatic compounds was identified and cleavage of these bonds was shown to generate either benzyl or phenoxy radicals. A linear relationship between standard enthalpy of formation (ΔH f o ) of these radicals and the yield sooting index (YSI) was found, and thus ΔH f ° can be applied as a metric to estimate YSIs of various aromatic compounds; higher ΔH f o of a radical indicates an increase in the radical reactivity and leads to more soot precursor formation. Flow reactor experiments were performed for 2-ethylphenol and 3-ethylphenol to elucidate how ortho and meta substitution effects the sooting tendency. Soot precursors were identified from the experiment and their formation pathways were investigated computationally. 2-ethylphenol produces more oxygenated products than 3-ethylphenol since the ortho position has increased resonance stabilization of radical intermediates, which leads to lower YSI. Overall, these results further inform the selection of potential biomass-derived fuel blendstocks that have favorable sooting tendencies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Coupling Between Electrons and Charge Density Wave Fluctuation and its Possible Role in Superconductivity

In most charge density wave (CDW) systems of different material classes, ranging from traditional correlated systems in low-dimension to recent topological systems with Kagome lattice, superconductivity emerges when the system is driven toward the quantum critical point (QCP) of CDW via external parameters of doping and pressure. Despite this rather universal trend, the essential hinge between CDW and superconductivity has not been established yet. Here, the evidence of coupling between electron and CDW fluctuation is reported, based on a temperature- and intercalation-dependent kink in the angle-resolved photoemission spectra of 2H-Pd x TaSe 2 . Kinks are observed only when the system is in the CDW phase, regardless of whether a long- or short-range order is established. Notably, the coupling strength is enhanced upon long-range CDW suppression, albeit the coupling energy scale is reduced. Interestingly, the estimation of the superconducting critical temperature by incorporating the observed coupling characteristics into McMillan's equation yields results closely resembling the known values of the superconducting dome. The results thus highlight a compelling possibility that this new coupling mediates Cooper pairs, which provides new insights into the competing relationship not only for CDW but also for other competing orders.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Compartment-specific energy requirements of photosynthetic carbon metabolism in Camelina sativa leaves

Abstract Main conclusion The oxidative pentose phosphate pathway provides cytosolic NADPH yet reduces carbon and energy use efficiency. Repressing this pathway and introducing cytosolic NADPH-dependent malate dehydrogenase may increase crop yields by ≈5%. Abstract Detailed knowledge about plant energy metabolism may aid crop improvements. Using published estimates of flux through central carbon metabolism, we phenotype energy metabolism in illuminated Camelina sativa leaves (grown at 22 °C, 500 µmol photons m −2 s −1 ) and report several findings. First, the oxidative pentose phosphate pathway (OPPP) transfers 3.3% of the NADPH consumed in the Calvin–Benson cycle to the cytosol. NADPH supply proceeds at about 10% of the rate of net carbon assimilation. However, concomitantly respired CO 2 accounts for 4.8% of total rubisco activity. Hence, 4.8% of the flux through the Calvin–Benson cycle and photorespiration is spent on supplying cytosolic NADPH, a significant investment. Associated energy requirements exceed the energy output of the OPPP. Thus, autotrophic carbon metabolism is not simply optimised for flux into carbon sinks but sacrifices carbon and energy use efficiency to support cytosolic energy metabolism. To reduce these costs, we suggest bioengineering plants with a repressed cytosolic OPPP, and an inserted cytosolic NADPH-dependent malate dehydrogenase tuned to compensate for the loss in OPPP activity (if required). Second, sucrose cycling is a minor investment in overall leaf energy metabolism but a significant investment in cytosolic energy metabolism. Third, leaf energy balancing strictly requires oxidative phosphorylation, cofactor export from chloroplasts, and peroxisomal NADH import. Fourth, mitochondria are energetically self-sufficient. Fifth, carbon metabolism has an ATP/NADPH demand ratio of 1.52 which is met if ≤ 21.7% of whole electron flux is cyclic. Sixth, electron transport has a photon use efficiency of ≥ 62%. Last, we discuss interactions between the OPPP and the cytosolic oxidation–reduction cycle in supplying leaf cytosolic NADPH.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Techno-economic analysis and life cycle analysis of renewable natural gas production from brewery wastewater via ex-situ methanation processes

As sustainability becomes increasingly critical, the brewing industry encounters challenges in managing high-organic-content wastewater, a promising renewable energy source. This study evaluates the economic feasibility and environmental impacts of converting brewery wastewater into renewable natural gas (RNG) through anaerobic digestion and biogas upgrading, with an emphasis on different hydrogen sources for biomethanation. Four scenarios were analyzed: Scenario 1 uses purchased hydrogen, while Scenarios 2–4 use renewable hydrogen from microbial electrolysis cells and water electrolyzers. Results show that capital investments for processing 139 MT/h of wastewater, yielding 208 m 3 /h of RNG, range from 10.6 M to 31.9M USD, with estimated minimum selling prices of RNG between 2.25 and 4.37 USD/m 3 . Life cycle greenhouse gas (GHG) emissions span from -21 to 32g CO 2 -equivalent per MJ of RNG. Further, this study presents key economic and environmental metrics for RNG production from brewery wastewater, offering insights to enhance sustainability in brewery wastewater management.

03 NATURAL GAS↗
DOE OSTI2020

Herbicide, fertilization, and planting density effects on intensively managed loblolly pine early stand development

Production forestry in the southeast US has been partially transitioned to intensively managed short rotations (~10 years), in which multiple silvicultural interventions are performed during forest development. Understanding the responses to silvicultural practices and continued refinement of site-specific recommendations is critical to sustainably maximize forest production. We evaluated the effects of silvicultural practices (herbicide, fertilization, and planting density) on growth, stand homogeneity, and above- and belowground biomass accumulation and partitioning of loblolly pine (Pinus taeda) throughout early stand development (age 5 years) in the southeastern US. Five treatments with eight replications each were tested: no herbicide and no fertilization (C); herbicide only (H); herbicide and half-reduced fertilization rate (R); herbicide and full fertilization (F); and increased stand density (60+ %; 1346 vs. 2152 trees per hectare) with herbicide and full fertilization rate (D). Allometric equations generated from destructive harvests were applied to annual diameter measurements to estimate plot-level biomass and allocation. Herbicide was crucial to promote stand uniformity and increase yield (~600+ % stem biomass compared with C at age 5). Aboveground biomass was similar in R and F treatments, which was ~25% higher than in H at age 5. Increasing planting density along with multiple herbicide and fertilizer applications yielded higher biomass without compromising individual tree size (diameter and height). There was little effect of silviculture practices on allocation patterns. Our results parallel what was found for fertilization with herbicide from a number of loblolly stands under similar conditions and indicate a ~28% volume gain with fertilization during early stand development. Similarly, our results were consistent with other studies implementing similar differences in planting density and suggest a ~26% volume gain through early stand development with an initial 60% increase in planting density. Furthermore, our study helps to understand complex relationships between production and silvicultural practices during early stand development and demonstrates that silvicultural prescriptions can be optimized to increase sustainability of production forestry

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2026

A variational framework for residual-based adaptivity in neural PDE solvers and operator learning

Residual-based adaptive strategies are widely used in scientific machine learning yet remain largely heuristic. We introduce a variational framework that formalizes these methods through convex transformations of the residual, where different transformations correspond to distinct objective functionals. For instance, exponential weights target uniform error minimization, while linear weights recover quadratic error minimization. This perspective reveals adaptive weighting as a means of selecting sampling distributions that optimize a primal objective, directly linking discretization choices to error metrics. This principled approach yields three key benefits: it enables systematic design of adaptive schemes, reduces discretization error by lowering estimator variance, and enhances learning dynamics by improving gradient signal-to-noise ratio. Extending the framework to operator learning, we demonstrate substantial performance gains across diverse optimizers and architectures. Our results provide a theoretical perspective for residual-based adaptivity and establish a foundation for principled discretization and training.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2022

Measurements of the 27 Al(α,n) Thick Target Yield near Threshold

In this work, we present results from direct measurements of the 27 Al(α,n) thick-target yield from laboratory incident energies E α ≈ 3 to 5 MeV, performed with the 3 HeBF 3 Giant Barrel (HeBGB) neutron detector at the Edwards Accelerator Laboratory. Our measurements have a small energy cadence in order to address discrepancies and sparseness of thick-target-yield data sets existing for this energy region. We find general agreement with existing data sets, including yields derived from cross-section data, while resolving a discrepancy between existing thick-target-yield data sets for E α ≈ 4–5 MeV. However, for E α < 3.5 MeV, our results are substantially lower than previous thick-target-yield data and somewhat larger than yields calculated from existing cross-section data. Our data complete the energy range needed for estimates of the 27 Al(α,n) contribution to neutrino and dark matter detector backgrounds and result in increased viability of 27 Al(α,n) as a plasma diagnostic tool at fusion facilities such as the National Ignition Facility.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2023

Superconducting properties and gap structure of the topological superconductor candidate Ti 3 Sb

Here, we present a study of the superconducting properties of the candidate topological superconductor Ti 3 Sb. Electrical transport measurements show zero resistance with a T c,onset of ≈ 5.9 K with a transition width ΔT c ≈ 0.6 K. The superconducting phase boundaries as derived from magnetotransport and magnetic susceptibility measurements agree well. We estimate an upper critical field B c2 (0) ≈ 4.5 T. A Ginzburg-Landau (GL) analysis yields values of the coherence length and penetration depth of ξ = 6.2 nm and λ = 340 nm, respectively, and a GL parameter κ ≈ 55, indicating extreme type-II behavior. Furthermore, we observe a step height in the specific heat $\frac{Δ C_e}{γ T_c}$ ≈ 1.61 ± 0.24 (with T c = 4.8 ± 0.4 K), a value larger than the Bardeen-Cooper-Schrieffer value of 1.43, suggesting modest coupling. Measurements of the temperature dependence of the London penetration depth via the tunnel-diode oscillator technique down to ≈ 450 mK show a full superconducting gap, consistent with a conventional s-wave gap structure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Assessment of Self-interrogation Safeguards Signatures for Pebble Bed Reactor Fuel

New reactor designs, such as pebble-bed reactors, present challenges for the safeguarding of fissile material. Due to the multi-pass fuel circulation design and the non-uniform path a pebble may traverse through a pebble-bed reactor, there will be variations in the irradiation history of spent fuel pebbles. The standard approach of estimating actinide quantities based on fission gamma spectra or neutron emission paired with depletion modeling may yield uncertainties too large for safeguards and material accountancy. This project investigated, through modeling and experimentation, the potential of neutron self-interrogation of spent fuel pebbles as an innovative method to implement materials accountability. As an example, our feasibility studies indicate that the mass of U-235, U-238, Pu-239 and Pu-241 can be predicted to 4.1, 0.86, 13 and 13 % accuracy, respectively, when measuring 100 closely packed end-of-life spent fuel pebbles over approximately 12 days using a 4π counting geometry.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2020

Mean Estimate Distances for Galaxies with Multiple Estimates in NED-D

Numerous research topics rely on an improved cosmic distance scale (e.g., cosmology, gravitational waves) and the NASA/IPAC Extragalactic Database of Distances (NED-D) supports those efforts by tabulating multiple redshift-independent distances for 12,000 galaxies (e.g., Large Magellanic Cloud (LMC) zero-point). Six methods for securing a mean estimate distance (MED) from the data are presented (e.g., indicator and Decision Tree). All six MEDs yield surprisingly consistent distances for the cases examined, including for the key benchmark LMC and M106 galaxies. The results underscore the utility of the NED-D MEDs in bolstering the cosmic distance scale and facilitating the identification of systematic trends.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2025

The z ∼ 1.03 Merging Cluster SPT-CL J0356–5337: New Strong Lensing Analysis with HST and MUSE

We present a strong lensing analysis and reconstruct the mass distribution of SPT-CL J0356−5337, a galaxy cluster at redshift z = 1.034. Our model supersedes previous models by making use of new multiband Hubble Space Telescope data and Multi-Unit Spectroscopic Explorer (MUSE) spectroscopy. We identify two additional lensed galaxies to inform a more well-constrained model using 12 sets of multiple images in five separate lensed sources. The three previously known sources were spectroscopically confirmed by G. Mahler et al. at redshifts of z = 2.363, z = 2.364, and z = 3.048. We measured the spectroscopic redshifts of two of the newly discovered arcs using MUSE data, at z = 3.0205 and z = 5.3288. We increase the number of cluster member galaxies by a factor of 3 compared to previous work. We also report the detection of extended Lyα emission from several background galaxies. We measure the total projected mass density of the two major subcluster components, one dominated by the brightest cluster galaxy and the other by a compact group of luminous red galaxies. We find ${M}_{{\rm{B}}{\rm{C}}{\rm{G}}}(\lt 80\,\rm{kpc})=3.9{3}_{-0.14}^{+0.21}\times 1{0}^{13}$ M⊙ and ${M}_{{\rm{LRG}}}(\lt 80\,\rm{kpc})=2.9{2}_{-0.23}^{+0.16}\times 1{0}^{13}$ M⊙, yielding a mass ratio of $1.3{5}_{-0.08}^{+0.16}$ . The strong lensing constraints offer a robust estimate of the projected mass density regardless of modeling assumptions; allowing more substructure in this line of sight does not change the results or conclusions. Our results corroborate the conclusion that SPT-CL J0356−5337 is dominated by two mass components and is likely undergoing a major merger on the plane of the sky.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

Improved isotope-shift-based bounds on bosons beyond the Standard Model through measurements of the $^2$D$_{3/2} - ^2$D$_{5/2}$ interval in Ca$^+$

We perform high-resolution spectroscopy of the $3$d$~^2$D$_{3/2} - 3$d$~^2$D$_{5/2}$ interval in all stable even isotopes of $^A$Ca$^+$ (A = 40, 42, 44, 46 and 48) with an accuracy of $\sim$ 20 Hz using direct frequency-comb Raman spectroscopy. Combining these data with isotope shift measurements of the 4s$~^2$S$_{1/2} \leftrightarrow 3$d$~^2$D$_{5/2}$ transition, we carry out a King plot analysis with unprecedented sensitivity to coupling between electrons and neutrons by bosons beyond the Standard Model. Furthermore, we estimate the sensitivity to such bosons from equivalent spectroscopy in Ba$^+$ and Yb$^+$. Finally, the data yield isotope shifts of the 4s$~^2$S$_{1/2} \leftrightarrow 3$d$~^2$D$_{3/2}$ transition at 10 part-per-billion through combination with recent data of Knollmann et al (2019).

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

Comparative Techno-Economic Analysis of Available Feedstocks for High-Temperature Conversion: Whole Tree Thinnings and Mature Pine Residues

The techno-economic and life cycle implications of utilizing low-cost feedstocks in a high temperature conversion process are of great interest. Here, we investigate the conversion cost impacts of two underutilized feedstocks from the commercial pine industry: 13-year-old whole trees, representing trees removed for the purpose of precommercial thinning, and 23-year-old pine residues, representing a waste stream produced from the deconstruction of mature trees for other purposes. Experimental fast pyrolysis (FP) yields for each feedstock were adjusted to a catalytic fast pyrolysis (CFP) basis and used to estimate process economics by employing published correlations based on rigorous techno-economic modeling. These correlations were used in tandem with results from supply and preprocessing analyses to evaluate the field-to-fuel economics of each feedstock. A small difference in minimum fuel selling price (MFSP) was found between the conversion costs for the two feedstocks, with 23-year-old residues demonstrating a net benefit of $0.27 per gasoline gallon equivalent (GGE) compared to the 13- year-old whole tree thinnings, driven primarily by feedstock supply costs. This suggests that both whole tree thinnings and pine residues may be viable feedstock options for CFP conversion. Life cycle inventories (LCIs) were also generated for each case, enabling a field-to-fuel quantification of the cost and carbon cycle associated with each feedstock.

catalytic fast pyrolysis↗
DOE OSTI2023

Synthesis, characterization, and recycling of bio-derivable polyester covalently adaptable networks for industrial composite applications

Fiber-reinforced polymers (FRPs) are critical for energy-relevant applications such as wind turbine blades. Despite this, the end-of-life options for FRPs are limited as they are permanently cross-linked thermosets. To enable the circularity of FRPs, we formulated a bio-derivable polyester covalently adaptable network (PECAN), sometimes referred to as a polyester vitrimer, to manufacture FRPs at >1 kg scale, which is accomplished as the resin is infusible (175-425 cP at 25 °C viscosity), can be cured at 80 °C within 5 h and is depolymerizable via methanolysis yielding high-quality fibers and recoverable hardener. The FRPs exhibit a transverse tensile modulus comparable with today's wind relevant FRPs (10.4-11.9 GPa). Modeling estimates a resin minimum selling price of $2.28/kg and, relative to an epoxy-amine resin, PECAN manufacture requires 19%-21% less supply chain energy and emits 33%-35% less greenhouse gas emissions. Overall, this study suggests that redesigned thermosets can yield beneficial circularity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗