Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “yield”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28

B{sup (*)}B{sup (*)} intermediate states contribution to {Upsilon}(4S,5S){yields}{eta}{sub b}+{gamma} radiative decay

In this work, we investigate the rescattering effects in the radiative decay {Upsilon}(5S){yields}{eta}{sub b}+{gamma}, which were suggested to be crucially important for understanding the anomalous largeness of the branching ratios B({Upsilon}(5S){yields}{Upsilon}(1S)+{pi}{pi}) and B({Upsilon}(5S){yields}{Upsilon}(1S)+{eta}). Our calculations show that the rescattering effects may enhance {Gamma}({Upsilon}(10860){yields}{eta}{sub b}+{gamma}) by four orders, but the tetraquark structure does not. Recently the BABAR and CLEO collaborations have measured the mass of {eta}{sub b} and the branching ratios B({Upsilon}(2S){yields}{eta}{sub b}+{gamma}), B({Upsilon}(3S){yields}{eta}{sub b}+{gamma}). We hope that very soon, {Upsilon}(10860){yields}{eta}{sub b}+{gamma} will be measured and it would be an ideal opportunity for testing whether the rescattering or the tetraquark structure is responsible for the anomaly of B({Upsilon}(5S){yields}{Upsilon}(nS){pi}{sup +}{pi}{sup -}(n=1,2,3)), i.e., the future measurements on the radiative decays of {Upsilon}(5S) might be a touchstone of the two mechanisms.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Observation of Y(2175) in J/{psi}{yields}{eta}{phi}f{sub 0}(980)

The decays of J/{psi}{yields}{eta}{phi}f{sub 0}(980)[{eta}{yields}{gamma}{gamma},{phi}{yields}K{sup +}K{sup -},f{sub 0}(980){yields}{pi}{sup +}{pi}{sup -}] are analyzed using a sample of 5.8x10{sup 7} J/{psi} events collected with the BESII detector at the Beijing Electron-Positron Collider. A structure at around 2.18 GeV/c{sup 2} with about 5{sigma} significance is observed in the {phi}f{sub 0}(980) invariant mass spectrum. A fit with a Breit-Wigner function gives the peak mass and width of m=2.186{+-}0.010(stat){+-}0.006(syst) GeV/c{sup 2} and {gamma}=0.065{+-}0.023(stat){+-}0.017(syst) GeV/c{sup 2}, respectively, which are consistent with those of Y(2175), observed by the BABAR Collaboration in the initial-state radiation process e{sup +}e{sup -}{yields}{gamma}{sub ISR}{phi}f{sub 0}(980). The production branching ratio is determined to be Br(J/{psi}{yields}{eta}Y(2175))Br(Y(2175){yields}{phi}f{sub 0}(980))Br(f{sub 0}(980){yields}{pi}{sup +}{pi}{sup -})=[3.23{+-}0.75(stat){+-}0.73 (syst)]x 10{sup -4}, assuming that the Y(2175) is a 1{sup --} state.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Evidence for the Decay D{sup 0}{yields}K{sup -}{pi}{sup +}{pi}{sup -}e{sup +}{nu}{sub e}

Using a 281 pb{sup -1} data sample collected at the {psi}(3770) with the CLEO-c detector, we present the first absolute branching fraction measurement of the decay D{sup 0}{yields}K{sup -}{pi}{sup +}{pi}{sup -}e{sup +}{nu}{sub e} at a statistical significance of about 4.0 standard deviations. We find 10 candidates consistent with the decay D{sup 0}{yields}K{sup -}{pi}{sup +}{pi}{sup -}e{sup +}{nu}{sub e}. The probability that a background fluctuation accounts for this signal is less than 4.1x10{sup -5}. We find B(D{sup 0}{yields}K{sup -}{pi}{sup +}{pi}{sup -}e{sup +}{nu}{sub e})=[2.8{sub -1.1}{sup +1.4}(stat){+-}0.3(syst)]x10 = {sup -4}. By restricting the invariant mass of the hadronic system to be consistent with K{sub 1}(1270), we obtain the product of branching fractions B(D{sup 0}{yields}K{sub 1}{sup -}(1270)e{sup +}{nu}{sub e})xB(K{sub 1}{sup -}(1270){yields}K{sup -}{pi}{sup +}{pi}{sup -})=[2.5{sub -1.0} = {sup +1.3}(stat){+-}0.2(syst)]x10{sup -4}. Using B(K{sub 1}{sup -}(1270){yields}K{sup -}{pi}{sup +}{pi}{sup -})=(33{+-}3)%, we obtain B(D{sup 0}{yields}K{sub 1}{sup -}(1270)e{sup +}{nu}{sub e})=[7.6{sub -3.0}{sup +4.1}(stat){+-}0.6(syst){+-}0.7] = x10{sup -4}. The last error accounts for the uncertainties in the measured K{sub 1}{sup -}(1270){yields}K{sup -}{pi}{sup +}{pi}{sup -} branching fractions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Poplar and shrub willow energy crops in the United States: field trial results from the multiyear regional feedstock partnership and yield potential maps based on the PRISM‐ELM model

Abstract To increase the understanding of poplar and willow perennial woody crops and facilitate their deployment for the production of biofuels, bioproducts, and bioenergy, there is a need for broadscale yield maps. For national analysis of woody and herbaceous crops production potential, biomass feedstock yield maps should be developed using a common framework. This study developed willow and poplar potential yield maps by combining data from a network of willow and poplar field trials and the modeling power of PRISM‐ELM. Yields of the top three willow cultivars across 17 sites ranged from 3.60 to 14.6 Mg ha −1 yr −1 dry weight, while the yields from 17 poplar trials ranged from 7.5 to 15.2 Mg ha −1 yr −1 . Relationships between the environmental suitability estimates from the PRISM‐ELM model and results from field trials had an R 2 of 0.60 for poplar and 0.81 for willow. The resulting potential yield maps reflected the range of poplar and willow yields that have been reported in the literature. Poplar covered a larger geographic range than willow, which likely reflects the poplar breeding efforts that have occurred for many more decades using genotypes from a broader range of environments than willow. While the field trial data sets used to develop these models represent the most complete information at the time, there is a need to expand and improve the model by monitoring trials over multiple cutting cycles and across a broader range of environmental gradients. Despite some limitations, the results of these models represent a dramatic improvement in projections of potential yield of poplar and willow crops across the United States.

09 BIOMASS FUELS↗

Calvin Cycle Flux, Pathway Constraints, and Substrate Oxidation State Together Determine the H 2 Biofuel Yield in Photoheterotrophic Bacteria

ABSTRACT Hydrogen gas (H 2 ) is a possible future transportation fuel that can be produced by anoxygenic phototrophic bacteria via nitrogenase. The electrons for H 2 are usually derived from organic compounds. Thus, one would expect more H 2 to be produced when anoxygenic phototrophs are supplied with increasingly reduced (electron-rich) organic compounds. However, the H 2 yield does not always differ according to the substrate oxidation state. To understand other factors that influence the H 2 yield, we determined metabolic fluxes in Rhodopseudomonas palustris grown on 13 C-labeled fumarate, succinate, acetate, and butyrate (in order from most oxidized to most reduced). The flux maps revealed that the H 2 yield was influenced by two main factors in addition to substrate oxidation state. The first factor was the route that a substrate took to biosynthetic precursors. For example, succinate took a different route to acetyl-coenzyme A (CoA) than acetate. As a result, R. palustris generated similar amounts of reducing equivalents and similar amounts of H 2 from both succinate and acetate, even though succinate is more oxidized than acetate. The second factor affecting the H 2 yield was the amount of Calvin cycle flux competing for electrons. When nitrogenase was active, electrons were diverted away from the Calvin cycle towards H 2 , but to various extents, depending on the substrate. When Calvin cycle flux was blocked, the H 2 yield increased during growth on all substrates. In general, this increase in H 2 yield could be predicted from the initial Calvin cycle flux. IMPORTANCE Photoheterotrophic bacteria, like Rhodopseudomonas palustris , obtain energy from light and carbon from organic compounds during anaerobic growth. Cells can naturally produce the biofuel H 2 as a way of disposing of excess electrons. Unexpectedly, feeding cells organic compounds with more electrons does not necessarily result in more H 2 . Despite repeated observations over the last 40 years, the reasons for this discrepancy have remained unclear. In this paper, we identified two metabolic factors that influence the H 2 yield, (i) the route taken to make biosynthetic precursors and (ii) the amount of CO 2 -fixing Calvin cycle flux that competes against H 2 production for electrons. We show that the H 2 yield can be improved on all substrates by using a strain that is incapable of Calvin cycle flux. We also contributed quantitative knowledge to the long-standing question of why photoheterotrophs must produce H 2 or fix CO 2 even on relatively oxidized substrates.

08 HYDROGEN↗

Global Market and Economic Welfare Implications of Changes in Agricultural Yields Due to Climate Change

The economic welfare effects of climate change on global agriculture will be mediated by several complex biophysical and economic processes. For a given emissions scenario, these include: (1) the response of the climate system to anthropogenic forcing, (2) the response of crop yields to climate system and carbon dioxide changes, given baseline improvements in crop yields, (3) the response of agricultural markets to crop yield changes, and (4) the economic welfare implications of such market responses. In this paper, we use information about the first two processes from available climate-crop model comparison studies to analyze implications for the third and fourth processes. Applying the range of crop yield changes in a Global Integrated Assessment Model (GCAM) highlights several important economic relationships. First, we find a consistent relationship between global cropland area and yield change that is approximately orthogonal to the relationship between regional cropland area and yield change. Second, we find that the change in economic welfare, expressed as total surplus change per unit economic output, peaks during the 21st century. Third, we find that, at the global level, changes in yield affect both producer surplus and consumer surplus. Specifically, surplus changes to producers and consumers are always opposite in sign, although which economic actors gain or lose varies with the sign of yield change for any given commodity. Taken together, these results contribute to a growing body of research on climate-induced changes on agriculture by highlighting several economic relationships that are robust to differences in the underlying biophysical responses.

54 ENVIRONMENTAL SCIENCES↗

Theoretical Yields for 188 W Production in the High Flux Isotope Reactor

Accurately predicting the production yield of 188 W and 191 Os from enriched 186W metal rings irradiated in HFIR is not straightforward. Two key factors can lead to significant uncertainty or inaccuracy in yield predictions: The effect of neutron flux depression in the dense tungsten metal target. Inaccuracy of the currently published 187 W thermal neutron absorption cross section. This manuscript reports the calculated yields for 188 W, 191 Os, and total osmium mass for the NM-888 target that was irradiated in High Flux Isotope Reactor (HFIR) Cycles 487 and 488. Three different yield calculation methods were used and are described herein. The results are presented in terms of total yield and in terms of yield per target mass. This allows for an approximate estimation of yields for future targets of varying mass loading but with similar irradiation profiles. For more accurate prediction yields, target-specific models that account for target loading, target positioning within HFIR, and accurate HFIR cycle data are required.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Long-term integrated soil-crop management improves soil microbial community structure to reduce GHG emission and increase yield

Integrated soil-crop management (ISCM) has been shown as an effective strategy to increase efficiency and yield while its soil microbial community structure and function remain unclear. We evaluated changes in soil physicochemical factors, bacterial community structure responses, and the contributions of soil properties and bacterial communities to summer maize-winter wheat yield and GHG emissions through an ISCM experiment [T1 (local smallholder farmers practice system), T2 (improved management system), T3 (high–yield production system), and T4 (optimized management system)], which could provide scientific guidance for sustainable development of soil in summer maize-winter wheat rotation system. The results showed that the optimized ISCM could improve the soil quality, which significantly changed the soil bacterial community structure to reduce GHG emissions and increase yield. The co-occurrence network density of T3 was increased significantly. The Acidobacteria (class) and OM190 (class) were enriched in T2 and T4. The Frankiales (order) and Gaiellales (order) were enriched in T3. However, the changes in different crop growth stages were different. At the wheat jointing stage and maize mature stage, T4 could enhance carbon-related functional groups, such as aromatic hydrocarbon degradation and hydrocarbon degradation, to increase the soil organic carbon content. And at the maize tasseling stage, T4 could enhance nitrogen-related functional groups. And soil bacteria structure and function indirectly affected annual yield and GHG emission. T2 and T4 exhibited a similar soil microbial community. However, the yield and nitrogen use efficiency of T2 were reduced compared to those of T4. The yield of T3 was the highest, but the GHG emission increased and soil pH and nitrogen use efficiency decreased significantly. Therefore, T4 was a suitable management system to improve soil quality and soil bacterial community structure and function to decrease GHG emissions and increase the yield of the summer maize-winter wheat rotation system.

Yu, Ningning↗

Prairies Thrive Where Row Crops Drown: A Comparison of Yields in Upland and Lowland Topographies in the Upper Midwest US

Cellulosic biofuel production is expected to increase in the US, and the targeted establishment of biofuel agriculture in marginal lands would reduce competition between biofuels and food crops. While poorly drained, seasonally saturated lowland landscape positions are marginal for production of row crops and switchgrass (Panicum virgatum L.), it is unclear whether species-diverse tallgrass prairie yield would suffer similarly in saturated lowlands. Prairie yields typically increase as graminoids become more dominant, but it is uncertain whether this trend is due to greater aboveground net primary productivity (ANPP) or higher harvest efficiency in graminoids compared to forbs. Belowground biomass, a factor that is important to ecosystem service provisioning, is reduced when switchgrass is grown in saturated lowlands, but it is not known whether the same is true in species-diverse prairie. Our objectives were to assess the effect of topography on yields and live belowground biomass in row crops and prairie, and to determine the mechanisms by which relative graminoid abundance influences tallgrass prairie yield. We measured yield, harvest efficiency, and live belowground biomass in upland and lowland landscape positions within maize silage (Zea mays L.), winter wheat (Triticum aestivum L.), and restored tallgrass prairie. Maize and winter wheat yields were reduced by more than 60% in poorly drained lowlands relative to well-drained uplands, but diverse prairie yields were equivalent in both topographic settings. Prairie yields increased by approximately 45% as the relative abundance of graminoids increased from 5% to 95%. However, this trend was due to higher harvest efficiency of graminoids rather than greater ANPP compared to forbs. In both row crops and prairie, live belowground biomass was similar between upland and lowland locations, indicating consistent biomass nutrient sequestration potential and soil organic matter inputs between topographic positions. While poorly drained, lowland landscape positions are marginal lands for row crops, they appear prime for the cultivation of species-diverse tallgrass prairie for cellulosic biofuel.

54 ENVIRONMENTAL SCIENCES↗

A crop yield change emulator for use in GCAM and similar models: Persephone v1.0

Abstract. Future changes in Earth system state will impact agricultural yields and, through these changed yields, can have profound impacts on the global economy. Global gridded crop models estimate the influence of these Earth system changes on future crop yields but are often too computationally intensive to dynamically couple into global multi-sector economic models, such as the Global Change Assessment Model (GCAM) and other similar-in-scale models. Yet, generalizing a faster site-specific crop model's results to be used globally will introduce inaccuracies, and the question of which model to use is unclear given the wide variation in yield response across crop models. To examine the feedback loop among socioeconomics, Earth system changes, and crop yield changes, rapidly generated yield responses with some quantification of crop response uncertainty are desirable. The Persephone v1.0 response functions presented in this work are based on the Agricultural Model Intercomparison and Improvement Project (AgMIP) Coordinated Climate-Crop Modeling Project (C3MP) sensitivity test data set and are focused on providing GCAM and similar models with a tractable number of rapid to evaluate dynamic yield response functions corresponding to a range of the yield response sensitivities seen in the C3MP data set. With the Persephone response functions, a new variety of agricultural impact experiments will be open to GCAM and other economic models: for example, examining the economic impacts of a multi-year drought in a key agricultural region and how economic changes in response to the drought can, in turn, impact the drought.

58 GEOSCIENCES↗

Yield estimation of sugarcane based on agrometeorological-spectral models

This work has the objective to assess the performance of a yield estimation model for sugarcane (Succharum officinarum). The model uses orbital gathered spectral data along with yield estimated from an agrometeorological model. The test site includes the sugarcane plantations of the Barra Grande Plant located in Lencois Paulista municipality in Sao Paulo State. Production data of four crop years were analyzed. Yield data observed in the first crop year (1983/84) were regressed against spectral and agrometeorological data of that same year. This provided the model to predict the yield for the following crop year i.e., 1984/85. The model to predict the yield of subsequent years (up to 1987/88) were developed similarly, incorporating all previous years data. The yield estimations obtained from these models explained 69, 54, and 50 percent of the yield variation in the 1984/85, 1985/86, and 1986/87 crop years, respectively. The accuracy of yield estimations based on spectral data only (vegetation index model) and on agrometeorological data only (agrometeorological model) were also investigated.

Rudorff, Bernardo Friedrich Theodor↗

Secondary electron yields of solar system ices

The secondary electron yields of H2O, CO2, NH3, and CH3OH ices have been measured as a function of electron beam energy in the 2- to 30-keV energy range. The ices were produced on a liquid-nitrogen-cooled cold finger and transferred under vacuum to a SEM where the yield measurements were made. The imaging capabilities of the SEM provide a means of correlating the yield measurements with the morphology of the ices and are also used to monitor charging effects. The yields were determined by measuring the amplified current from a secondary electron detector and calibrating this current signal with the amplified current signal from samples of metals with known secondary electron yields. Each of the measured yields is found to decrease with an increase in energy in the 2- to 30-keV range. Estimates are given for the maximum secondary electron yield Y(max) of each ice and the energy at which this maximum yield occurs. Implications for the charging of solar system ice grains are discussed.

Suszcynsky, David M.↗

Xenon Sputter Yield Measurements for Ion Thruster Materials

In this paper, we describe a technique that was used to measure total and differential sputter yields of materials important to high specific impulse ion thrusters. The heart of the technique is a quartz crystal monitor that is swept at constant radial distance from a small target region where a high current density xenon ion beam is aimed. Differential sputtering yields were generally measured over a full 180 deg arc in a plane that included the beam centerline and the normal vector to the target surface. Sputter yield results are presented for a xenon ion energy range from 0.5 to 10 keV and an angle of incidence range from 0 deg to 70 deg from the target surface normal direction for targets consisting of molybdenum, titanium, solid (Poco) graphite, and flexible graphite (grafoil). Total sputter yields are calculated using a simple integration procedure and comparisons are made to sputter yields obtained from the literature. In general, the agreement between the available data is good. As expected for heavy xenon ions, the differential and total sputter yields are found to be strong functions of angle of incidence. Significant under- and over-cosine behavior is observed at low- and high-ion energies, respectively. In addition, strong differences in differential yield behavior are observed between low-Z targets (C and Ti) and high-Z targets (Mo). Curve fits to the differential sputter yield data are provided. They should prove useful to analysts interested in predicting the erosion profiles of ion thruster components and determining where the erosion products re-deposit.

Williams, John D.↗

Effects of Incident Electron Fluence and Energy on the Election Yield Curves and Emission Spectra of Dielectrics

We present an experimental study of evolution of electron emission yields and spectra as a result of internal charge build up due to electron dose. Reliable total, backscattered and secondary yield curves and electron emission spectra for un-charged insulators using a low fluence, pulsed electron beam (= or < 5 microsec at = or < 3 nA/sq mm or = or < 10(exp 5) e/sq mm per pulse) with low energy electron and UV flooding to neutralize the charging between pulses. Quantifiable changes in yield curves are observed due to < 100 fC/sq mm fluences for several excellent dielectric thin film materials. We find good agreement with a phenomenological argument based on insulator charging predicted by the yield curve; this includes an approximately linear decrease in the magnitude of the yield as incident energies approach the crossover energies and an exponential decrease in yield as accumulated internal charge reduces the landing energy to asymptotically approach a steady state surface charge and unity yield. We also find that the exponential decay of yield curves with fluence exhibit an energy dependent decay constant, alpha(E), over a broad range of incident energies below, between and above the crossover energies. Finally, we present some preliminary physics-based models for this energy dependence and attempt to relate our charging measurements to knowledge of how charge is deposited within the insulator, the mechanisms for charge trapping and transport, and how the profile of trapped charge affects the transport and emission of charges from insulators.

Sim, Alec↗

Evolution of the Electron Yield Curves of Insulators as a Function of Impinging Electron Fluence and Energy

Electron emission and concomitant change accumulation near the surface of insulators in central to understanding spacecraft charging. We present a study of changes in electron emission yields as a result of internal charge build up due to electron dose. Evolution of total, backscattered and secondary yield results over a broad range of incident energies are presented for two representative insulators, Kapton(trademark) and Al2O3. Reliable yield curves for uncharged insulators are measured and quantifiable changes in yield are observed due to < 100 fC/sq mm fluences. We find excellent agreement with a phenomenological argument based on insulator charging predicted by the yield curve; this includes a decrease in the rate of change of the yield as incident energies approach the crossover energies and as accumulated internal charge reduces the landing energy to asymptotically approach a steady state surface charge and unity yield. We also find that the exponential decay of yield curves with fluence exhibit an energy dependent decay constant, alpha(E). Finally, we discuss physics based models for this energy dependence. To understand fluence and energy dependence of these charging processes requires knowledge of how charge is deposited within the insulator, the mechanisms for charge trapping and transport within the insulator, and how the profile of trapped charge affects the transport and emission of charges from insulators.

Sim, Alec↗

Atomic Oxygen Erosion Yield Prediction for Spacecraft Polymers in Low Earth Orbit

The ability to predict the atomic oxygen erosion yield of polymers based on their chemistry and physical properties has been only partially successful because of a lack of reliable low Earth orbit (LEO) erosion yield data. Unfortunately, many of the early experiments did not utilize dehydrated mass loss measurements for erosion yield determination, and the resulting mass loss due to atomic oxygen exposure may have been compromised because samples were often not in consistent states of dehydration during the pre-flight and post-flight mass measurements. This is a particular problem for short duration mission exposures or low erosion yield materials. However, as a result of the retrieval of the Polymer Erosion and Contamination Experiment (PEACE) flown as part of the Materials International Space Station Experiment 2 (MISSE 2), the erosion yields of 38 polymers and pyrolytic graphite were accurately measured. The experiment was exposed to the LEO environment for 3.95 years from August 16, 2001 to July 30, 2005 and was successfully retrieved during a space walk on July 30, 2005 during Discovery s STS-114 Return to Flight mission. The 40 different materials tested (including Kapton H fluence witness samples) were selected specifically to represent a variety of polymers used in space as well as a wide variety of polymer chemical structures. The MISSE 2 PEACE Polymers experiment used carefully dehydrated mass measurements, as well as accurate density measurements to obtain accurate erosion yield data for high-fluence (8.43 1021 atoms/sq cm). The resulting data was used to develop an erosion yield predictive tool with a correlation coefficient of 0.895 and uncertainty of +/-6.3 10(exp -25)cu cm/atom. The predictive tool utilizes the chemical structures and physical properties of polymers to predict in-space atomic oxygen erosion yields. A predictive tool concept (September 2009 version) is presented which represents an improvement over an earlier (December 2008) version.

Banks, Bruce A.↗