Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “waveguide”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28

Note: Characterization of the plasma parameters of a capillary discharge-produced plasma channel waveguide to guide an intense laser pulse

We demonstrated the production of an optical waveguide in a capillary discharge-produced plasma using a cylindrical capillary. Plasma parameters of its waveguide were characterized by use of both a Nomarski laser interferometer and a hydrogen plasma line spectrum. A space-averaged maximum temperature of 3.3 eV with electron densities of the order of 10{sup 17} cm{sup -3} was observed at a discharge time of 150 ns and a maximum discharge current of 400 A. An ultrashort, intense laser pulse was guided by use of this plasma channel.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Nanocrystal in Er{sup 3+}-doped SiO{sub 2}-ZrO{sub 2} Planar Waveguide with Yb{sup 3+} Sensitizer

Higher doping of Er{sup 3+} in glass ceramic waveguides would cause concentration and pair-induced quenching which lead to inhomogeneous line-width of luminescence spectrum thus reduce output intensity. Concentration quenching can be overcome by introducing ZrO{sub 2} in the glass matrix while co-doping with Yb{sup 3+} which acts as sensitizer would improve the excitation efficiency of Er{sup 3+}. In this study, SiO{sub 2}-ZrO{sub 2} planar waveguides having composition in mol percent of 70SiO{sub 2}-30ZrO{sub 2} doped with Er{sup 3+} and co-doped with Yb{sup 3+}, were prepared via sol-gel route. Narrower and shaper peaks of PL and XRD shows the formation of nanocrystals. Intensity is increase with addition amount of Yb{sup 3+} shows sensitizing effect on Er{sup 3+}.

36 MATERIALS SCIENCE↗

Stable coaxial-waveguide gyrotron backward-wave oscillator with distributed losses

This study analyzes the performance of a coaxial-waveguide gyrotron backward-wave oscillator (gyro-BWO) operating at the fundamental harmonic by considering mode competition, which may be attributed to higher-order axial modes and competing transverse modes. In the coaxial waveguide with a short length and uniform cross section, the threshold currents of the higher-order axial modes are substantially higher than the operating current. Additionally, when the beam voltage or the magnetic field is adjusted, the oscillation that neighbors the minimum start-oscillation current of a transverse mode has a positive-k{sub z} field profile, and is excited near the cutoff frequency. As a result, the distributed wall losses at the downstream end of the interaction structure effectively damp the positive-k{sub z} field, and raise significantly the minimum start-oscillation currents of the competing transverse modes. This study also investigates how the parameters, including lossy section length, outer wall resistivity, inner wall resistivity, and ratio of the outer radius to the inner radius, affect the start-oscillation currents of the competing transverse modes in order to obtain stable operation conditions in the frequency tuning range. As is forecasted, when using a 15 A electron beam, the Ka-band coaxial gyro-BWO produces an output power of 137 kW and 3 dB bandwidth of 4.2% by magnetic tuning and an output power of 145 kW and 3dB bandwidth of 2.0% by beam voltage tuning.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

High-Gradient Tests of the Single-Cell SC Cavity with a Feedback Waveguide

Use of a superconducting (SC) traveling-wave accelerating (STWA) structure with a small phase advance per cell, rather than a standing-wave structure, may provide a significant increase in the accelerating gradient in the ILC linac [1]. For the same surface electric and magnetic fields, the STWA achieves an accelerating gradient 1.2 larger than TESLA-like standing-wave cavities. In addition, the STWA allows longer acceleration cavities, reducing the number of gaps between them. However, the STWA structure requires a SC feedback waveguide to return the few hundreds of MW of circulating RF power from the structure output to the structure input. A test single-cell cavity with feedback was designed and manufactured to demonstrate the possibility of proper processing to achieve a high accelerating gradient. The first results of high-gradient tests of a prototype 1.3 GHz single-cell cavity with feedback waveguide will be presented.

43 PARTICLE ACCELERATORS↗

Selective amplification of the lower-frequency branch via stimulated super-radiance in a waveguided free electron laser oscillator driven by short electron bunches

In this letter, we propose a mechanism to extend the spectral range of a waveguided free electron laser (FEL) oscillator driven by a rf LINAC toward significantly longer wavelengths without changing the undulator or accelerator design parameters. This mechanism involves selective amplification of a lower-frequency branch supported in a FEL due to the waveguide dispersion. Based on simulations performed for the terahertz FEL under construction at the Radboud University Nijmegen, we conclude that these long wavelengths can be efficiently amplified via stimulated super-radiance as the electron bunches are shorter than the radiation wavelength.

43 PARTICLE ACCELERATORS↗

Simulations of multipactor in circular waveguides

Detailed numerical simulations have been done to investigate the properties of multipactor breakdown in circular waveguides operating in the propagating fundamental TE11 mode. Main attention has been given to a comparison between the two fundamental cases corresponding to linear and circular polarizations, respectively, of the propagating electromagnetic wave. It is found that circular polarization is considerably more susceptible to multipactor than linear polarization. The reason for this difference is clarified by a comprehensive study of the electron motion in the waveguide.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Observation and numerical analysis of plasma parameters in a capillary discharge-produced plasma channel waveguide

We observed the parameters of the discharge-produced plasma in cylindrical capillary. Plasma parameters of the waveguide were investigated by use of both a Normarski laser interferometer and a hydrogen plasma line spectrum. A space-averaged maximum temperature of 3.3 eV with electron densities of the order of 10{sup 17} cm{sup -3} was observed at a discharge time of 150 ns and a maximum discharge current of 200 A. One-dimensional dissipative magnetohydrodynamic (MHD) code was used to analyze the discharge dynamics in the gas-filled capillary discharge waveguide for high-intensity laser pulses. Simulations were performed for the conditions of the experiment. We compared the temporal behavior of the electron temperature and the radial electron density profiles, measured in the experiment with the results of the numerical simulations. They occurred to be in a good agreement. An ultrashort, intense laser pulse was guided by use of this plasma channel.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A high voltage pulsed power supply for capillary discharge waveguide applications

We present an all solid-state, high voltage pulsed power supply for inducing stable plasma formation (density {approx}10{sup 18} cm{sup -3}) in gas-filled capillary discharge waveguides. The pulser (pulse duration of 1 {mu}s) is based on transistor switching and wound transmission line transformer technology. For a capillary of length 40 mm and diameter 265 {mu}m and gas backing pressure of 100 mbar, a fast voltage pulse risetime of 95 ns initiates breakdown at 13 kV along the capillary. A peak current of {approx}280 A indicates near complete ionization, and the r.m.s. temporal jitter in the current pulse is only 4 ns. Temporally stable plasma formation is crucial for deploying capillary waveguides as plasma channels in laser-plasma interaction experiments, such as the laser wakefield accelerator.

43 PARTICLE ACCELERATORS↗

Effects of tapering structures on the characteristics of a coaxial-waveguide gyrotron backward-wave oscillator

This study analyzes the characteristics of a gyrotron backward-wave oscillator (gyro-BWO) with a longitudinally tapered coaxial-waveguide by using a single-mode, self-consistent nonlinear code. Simulation results indicate that although tapering the inner wall or the outer wall can significantly raise the start-oscillation current, the former is more suitable for mode selection than the latter because an increase of the start-oscillation current by a tapered inner wall heavily depends on the chosen C value (i.e., the average ratio of the outer radius to the inner radius over the axial waveguide length). Selective suppression of the competing mode by tapering the inner wall is numerically demonstrated. Moreover, efficiency of the coaxial gyro-BWO is increased by tapering the outer wall. Properly down-tapering the outer wall ensures that the coaxial gyro-BWO can reach a maximum efficiency over twice that with a uniform one.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Properties of a capillary discharge-produced argon plasma waveguide for shorter wavelength source application

We report the operation of a discharge-produced argon (Ar) plasma waveguide in an alumina (Al{sub 2}O{sub 3}) capillary to guide a 10{sup 16}-W/cm{sup 2} ultrashort laser pulse for shorter wavelength light sources at high repetition rate operation. The electron density in the plasma channel was measured to be 1 x 10{sup 18} cm{sup -3}. Modeling with a one-dimensional magnetrohydrodynamic code was used to evaluate the degree of ionization of Ar in the preformed plasma channel. The observed spectrum of the laser pulse after propagation in the argon plasma waveguide was not modified and was well reproduced by a particle in cell simulation.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

A watt-class 1-THz backward-wave oscillator based on sine waveguide

A novel backward wave oscillator was proposed by utilizing a concise sine waveguide slow-wave structure combined with sheet electron beam to operate at terahertz frequency band. First, the design method was described, and the dispersion curve and interaction impedance of the sine waveguide were calculated, then the device oscillation frequency and operating voltage were determined. Next, the circuit transmission losses were learned over the tunable frequency range. Finally, the particle-in-cell simulation method was applied to predict its signal generation performance. The investigation results show that, the backward wave oscillator can produce over 1.9 -W peak power output at the central operating frequency of 1-THz under 27-kV operating voltage and 5-mA beam current. And the interaction efficiency at 1-THz is more than 1.4% with a circuit length of 7.2-mm. It, therefore, will be considered as a promising watt-class terahertz radiation source.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Microwave breakdown for the TE{sub 10} mode in a rectangular waveguide

Microwave breakdown is studied for the lowest order TE{sub 10} mode in a rectangular waveguide with the help of direct variational approach via the continuity equation along with the use of ionisation and attachment frequency. We investigate the role of the ionisation, attachment of electron with neutral gas or air molecules and the diffusion on microwave breakdown threshold in the waveguide filled with air or Ar Gas. We examine the effect of different gases and microwave parameters on the diffusion length and the breakdown threshold of electric field of continuous microwave and pulsed microwave. We also employ numerical approach for obtaining the results and compare them with the ones of variational approach.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Hybrid plasmonic waveguide in a metal V-groove

We propose and investigate a type of hybrid plasmonic waveguide in a metal V-groove. A high-permittivity nanowire was placed in the metal channel covered with a dielectric film of lower permittivity. Deeper sub-wavelength confinement and much longer propagation distance were achieved in comparison with conventional channel plasmonic waveguides. The overall performance was improved as compared with the conventional hybrid plasmonic structure based on a flat metal surface. Finite element analysis showed that both the mode propagation and field profile can be adjusted by changing the nanowire radius and film thickness. Some benefits, such as a reduced scattering loss caused by the surface roughness, are also expected owing to the unique mode profile. The proposed approach has potential for application in high-level photonic integration.

36 MATERIALS SCIENCE↗

Theoretical and experimental investigations of asymmetric light transport in graded index photonic crystal waveguides

To provide asymmetric propagation of light, we propose a graded index photonic crystal (GRIN PC) based waveguide configuration that is formed by introducing line and point defects as well as intentional perturbations inside the structure. The designed system utilizes isotropic materials and is purely reciprocal, linear, and time-independent, since neither magneto-optical materials are used nor time-reversal symmetry is broken. The numerical results show that the proposed scheme based on the spatial-inversion symmetry breaking has different forward (with a peak value of 49.8%) and backward transmissions (4.11% at most) as well as relatively small round-trip transmission (at most 7.11%) in a large operational bandwidth of 52.6 nm. The signal contrast ratio of the designed configuration is above 0.80 in the telecom wavelengths of 1523.5–1576.1 nm. An experimental measurement is also conducted in the microwave regime: A strong asymmetric propagation characteristic is observed within the frequency interval of 12.8 GHz–13.3 GHz. The numerical and experimental results confirm the asymmetric transmission behavior of the proposed GRIN PC waveguide.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Silicon-on-nitride structures for mid-infrared gap-plasmon waveguiding

Silicon-on-nitride (SON) is a convenient, low-loss platform for mid-infrared group IV plasmonics and photonics. We have designed 5-layer SON channel-waveguides and slab-waveguides for the 2.0 to 5.4 μm wavelength range and have simulated the resulting three-dimensional (3D) and two-dimensional (2D) SON gap-plasmon modes. Our simulations show propagation lengths of ∼60 μm for 3D gap-strip modes having a 0.003 λ{sup 2} cross-section. Because the ∼50-nm SON (Si{sub 3}N{sub 4}) mode region is also a gate insulator between silver (Ag) and n-doped Silicon (Si), metal-oxide-semiconductor accumulation gating is available for electro-optical loss modulation of the gap-confined mode.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Disorder-induced transparency in a one-dimensional waveguide side coupled with optical cavities

Disorder influence on photon transmission behavior is theoretically studied in a one-dimensional waveguide side coupled with a series of optical cavities. For this sake, we propose a concept of disorder-induced transparency appearing on the low-transmission spectral background. Two kinds of disorders, namely, disorders of optical cavity eigenfrequencies and relative phases in the waveguide side coupled with optical cavities are considered to show the disorder-induced transparency. They both can induce the optical transmission peaks on the low-transmission backgrounds. The statistical mean value of the transmission also increases with increasing the disorders of the cavity eigenfrequencies and relative phases.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Metallic nanoparticles grown in the core of femtosecond laser micromachined waveguides

3D-waveguides containing silver nanoparticles have been fabricated in tungsten lead–pyrophosphate glass by femtosecond laser micromachining. Nucleation and growth of nanoparticles occur in a single step process when high repetition rate laser (MHz) is employed, while an additional annealing is required for the irradiation using kHz laser system. The presence of nanoparticles locally changes the refractive index, and, therefore, the elliptical structures produced by direct laser writing were able to guide light. By increasing the pulse energy applied during the micromachining, the waveguide size increased from 2 to 30 μm, while their propagation loss decrease from 1.4 to 0.5 dB/mm at 632.8 nm.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Parallel parametric amplification of coherently excited propagating spin waves in a microscopic Ni{sub 81}Fe{sub 19} waveguide

We present parallel parametric amplification of coherently excited, propagating spin waves in a microstructured magnonic Ni{sub 81}Fe{sub 19} waveguide. Amplification is achieved by the pumping field generated by a microwave current flowing through a Cu micro-stripline underneath the waveguide. By employing microfocussed Brillouin light scattering spectroscopy, we investigate the spatial decay of the propagating spin waves and their amplification by means of parallel pumping. We analyze the dependence of the intensity of the amplified spin waves on the spin-wave excitation power, pumping power, and pumping duration, revealing the most efficient working point for a noise-free amplification. This paves the way for a frequency selective amplification of spin waves in microstructured magnonic circuits.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗