Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “visibility”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28

DMSP-SSM/1 NASA algorithm validation using primarily LANDSAT and secondarily DMSP and/or AVHRR visible and thermal infrared satellite imagery

The approach to the DMSP SSMI (Defense Meteorological Satellite Program; Special Sensor Microwave Imager) sea-ice validation effort is to demonstrate a quantitative relationship between the SSMI-derived sea ice parameters and those same parameters derived from other data sets including visible and infrared satellite imagery, aerial photographic and high-resolution microwave aircraft imagery. The question to be addressed is to what accuracy (relative to these other observations) can the following ice parameters be determined: (1) position of the ice boundary; (2) total sea ice concentration; and (3) multiyear sea ice concentration. Specific tasks include: (1) a study of the interrelationship of surface information content and sensor spatial and spectral resolution in order to establish relationships between ice surface features and the manner in which they are expressed in the satellite observations; and (2) apply these relationships to map the sea ice features which can be used to evaluate NASA's proposed SSM/1 sea ice algorithms. Other key points to be addressed include the accuracy to which these parameters can be determined in different regions (marginal ice zone such as Bering Sea, Arctic ocean, such as Beaufort Sea); the accuracy of these parameters for different seasons; the accuracy of the algorithms weather filter under different weather conditions; and the effectiveness of the 85.5 GHz channels to locate the ice edge.

Steffen, K.↗

High performance visible and near-infrared charge-coupled-device array for spectroscopy applications

This paper describes the design and performance of a scientific CCD array for use in NASA's Shuttle Image Spectrometer Experiment. The device is a four-phase, buried-channel CCD structure that operates in the frame-transfer mode. The sensor consists of 64 x 404 pixels, has a 100 percent fill factor, and operates in the visible and near-infrared spectral regions. In operation, the 404 horizontal elements provide spatial information, while the 64 vertical elements give spectral information covering the wavelength range of 400 to 1000 nm in 10 nm increments. The high full-well capacity of each pixel and low noise floor yield a dynamic range of more than 95 dB. In addition, the device has been designed to have good linearity characteristics. The unique dual-output structure allows a horizontal row to be read out to the right or to the left, or it can be split from the middle to both right and left output circuits simultaneously for high speed applications. The power dissipation of the device is about 60 mW.

Wang, Weng-Lyang↗

The Visible Airglow Experiment - A review

Contributions of the Visible Airglow Experiment (VAE) to the understanding of various airglow and auroral processes are reviewed. The impact of instrumental design and operation on the observations is discussed, and emphasis is placed on the relationship between observations and inversion for optical measurements of light emissions from a diffuse medium. VAE data are used to explain the physical mechanisms responsible for the production and destruction of excited species including O(+)(1P), O(1D), O(1S), N(2D), and Mg(+)2P1/2.

Hays, Paul B.↗

Implementation and flight-test of a multi-mode rotorcraft flight-control system for single-pilot use in poor visibility

A flight investigation was conducted to evaluate a multi-mode flight control system designed according to the most recent recommendations for handling qualities criteria for new military helicopters. The modes and capabilities that were included in the system are those considered necessary to permit divided-attention (single-pilot) lowspeed and hover operations near the ground in poor visibility conditions. Design features included mode-selection and mode-blending logic, the use of an automatic position-hold mode that employed precision measurements of aircraft position, and a hover display which permitted manually-controlled hover flight tasks in simulated instrument conditions. Pilot evaluations of the system were conducted using a multi-segment evaluation task. Pilot comments concerning the use of the system are provided, and flight-test data are presented to show system performance.

Hindson, William S.↗

Nickel, argon and cobalt in the infrared spectrum of SN1987A - The core becomes visible

Infrared spectra of supernova 1987A taken in April and November 1987 are presented, showing two distinctly different stages in the evolution of the expanding gas shell. The optical and infrared spectrum in April originated from the hydrogen envelope and show weak hydrogen lines rising above a 5,000-K photospheric continuum. The November spectrum was dominated by strong emission lines from heavy elements as well as many lines from highly excited levels of hydrogen, with peak flux levels in the lines at or slightly above the level of the continuum in April. It is concluded that the inner regions of the supernova were just becoming visible in early 1988. It is expected that these regions contain heavy elements produced by advanced nuclear burning stages in the progenitor star and in the shock wave that ejected all material external to the iron core.

Rank, D. M.↗

Visible-ultraviolet absorption cross sections for NO2 as a function of temperature

A redetermination of the temperature dependence of the absorption cross-section (sigma) of NO2 in the visible-ultraviolet region was made in order to provide a more reliable data base for the calculation of NO2 photolysis rates in the atmosphere. Experiments over a wide range of temperatures and NO2 concentrations were conducted. The integral of a plot of sigma versus the inverse of the wavelength was essentially independent of temperature. Increasing temperature produced a shift of the spectrum toward longer wavelengths, resulting in a small negative temperature dependence of sigma over the 264-400 nm range and a small positive dependence over the 450-649 nm range. Increasing temperature produced broadening of individual spectral features, resulting in a systematic lowering of peaks and filling of valleys. Recommended cross sections are presented for use in tropospheric NO2 photolysis rate calculations.

Davidson, J. A.↗

Visible and near-ultraviolet spectroscopy at Thule AFB (76.5 N) from January 28 - February 15, 1988

Near-ultraviolet and visible spectrographs identical to those employed at McMurdo Station, Antarctica (77.8 S) during the austral spring seasons of 1986 and 1987 were used to study the stratosphere above Thule, Greenland (76.5 N) during early spring, 1988. Observations were carried out both at night using the direct moon as a light source, and during the day by collecting the scattered light from the zenith sky when solar zenith angles were less than about 94.5 degrees. Excellent meteorological conditions prevailed in the troposphere and stratosphere at Thule. Surface weather was extremely clear over most of the period, facilitating measurements of the direct light from the moon. The lower stratospheric arctic polar vortex was located very near Thule throughout the observing period, and temperature at the 30 mbar level were typically below -80 C above Thule, according to the National Meteorological Center daily analyses. Thus conditions were favorable for polar stratospheric cloud formation above Thule. Total column ozone abundances were about 350 to 400 Dobson units, and did not suggest a clear temporal trend over the observing period. Stratospheric nitrogen dioxide measurements were complicated by the presence of a large component of tropospheric pollution on many occasions. Stratospheric nitrogen dioxide could be identified on most days using the absorption in the scattered light from the zenith sky, which greatly enhances the stratospheric airmass while suppressing the tropospheric contribution. These measurements suggest that the total vertical column abundance of nitrogen dioxide present over Thule in February was extremely low, sometimes as low as 3 x 10 to the 14th per sq cm. The abundance of nitrogen dioxide increased systemically from about 3 x 10 to the 14th in late January to 1.0 x 10 to the 15th per sq cm in mid-February, perhaps because of photolysis of N2O5 in the upper part of the stratosphere, near 25 to 35 km.

Mount, G. H.↗

Ozone and nitrogen dioxide ground based monitoring by zenith sky visible spectrometry in Arctic and Antarctic

Unattended diode array spectrometers have been designed for ground based stratospheric trace species monitoring by zenith sky visible spectrometry. Measurements are performed with a 1.0 nm resolution between 290 nm and 590 nm in order to allow simultaneous evaluations of column densities of ozone, nitrogen dioxide. Field tests have shown that the species can be monitored with a precision of + or - 2 Dobson for the first and + or - 2.10 to the 15th mol/sq cm for the second, although the absolute accuracy of the method is limited by the error of the estimation of the atmospheric optical path of the scattered light. Two identical instruments were set up in January 1988, one in Antarctica at Dumont d'Urville (66 S, 140 E) to be operated all year and another one in the Arctic at ESRANGE at Kiruna (68 N; 22 E) which will operate to the final warming of spring 1988. The data are processed in real time at both stations. O3 and NO2 columns are transmitted together with surface and stratospheric temperature and winds. They are also recorded for further treatment and search for OClO and BrO. Only one month of data from Antarctica is available at the moment. Obtained during polar summer, they cannot show more than stable columns of O3 and NO2 and for the last species, the buildup of its diurnal variation.

Pommereau, J. P.↗

The addition of visible channel data to satellite infrared rain estimation schemes

The effect of adding visible channel (VIS) data to the IR data in satellite rain estimation schemes was investigated by comparing the abilities of satellite threshold schemes based on VIS, IR channel, or bispectral (VIS/IR) data to estimate convective precipitation. Using the methodology of Bellon and Austin (1986), empirical relationships between the satellite and radar data were determined for two areas: the Florida Area Cumulus Experiment (FACE) area and a 25-km area on a side centered on 26 N, 81 W, which was inclusive of the FACE area but exclusive of points within 50 km or greater than 170 km of the Miami WSR-57 radar. The results did not demonstrate an unequivocal effect of VIS data. The normalized rms error data for the three estimation schemes used in a four-day experiment are presented.

Negri, Andrew J.↗

Prediction of leaf chemistry by the use of visible and near infrared reflectance spectroscopy

The chemical content of dry, ground leaf material sampled from deciduous and conifer tree species from sites in Alaska, Wisconsin, and California was estimated using visible and shortwave IR spectroscopy. Seven chemical components - sugar, starch, protein, cellulose, total chlorophyll, lignin, and total nitrogen - were analyzed by wet chemical methods and their concentrations regressed against log 1/rho and first and second differences of log 1/rho (where rho is measured reflectance) at wavelengths selected by stepwise regression. Predictions of chemical concentrations based on cross validation suggest that this technique may be useful for extracting vegetation canopy biochemical information by remote sensing.

Card, Don H.↗

Visible BaB2O4 optical parametric oscillator pumped at 355 nm by a single-axial-mode pulsed source

A visible BaB2O4 optical parametric oscillator (OPO) pumped by a single-axial-mode 355-nm source has been demonstrated. An average output power of 140 mW with a signal wave conversion efficiency of 13 percent and an idler conversion efficiency of 11 percent for a total conversion efficiency of 24 percent has been achieved. The oscillator has continuously tuned from 412 nm to 2.55 microns limited by the infrared transmission range of the crystal. Through injection seeding, single-axial-mode OPO operation with a corresponding OPO linewidth of less than 3 GHz was obtained.

Fan, Y. X.↗

Calibration of the visible and near-infrared channels of the LANDSAT-5 Thematic Mapper using high-altitude aircraft measurements

Visible near-infrared sensors mounted on operational satellites now in use do not have on-board full aperture absolute calibration devices. One means of establishing an in-orbit calibration for a satellite sensor is to make simultaneous measurements of a bright, uniform scene along the satellite view vector from a calibrated instrument on board a high altitude aircraft. In the work reported here, aircraft data were recorded over White Sands, New Mexico at satellite overpass time for the LANDSAT-5 Thematic Mapper (TM). A comparison of the coincident aircraft and orbiting satellite data showed the radiometric gain for TM channel 1 had degraded 4.7 percent by August 28, 1985; gains for TM channels 2 and 3 were within 1 percent of prelaunch values.

Smith, G. R.↗

SAGE 3: A visible wavelength limb sounder

A brief description is presented for the SAGE 3 (Stratospheric Aerosol and Gas Experiment 3) instrument that has been selected to fly onboard the National Polar Platform 1 (NPOP 1) for the Earth Observational System (Eos) in 1996. The SAGE 3 instrument will perform earth limb sounding with the solar occultation technique measuring the ultraviolet (UV), the visible, and the near infrared (IR) wavelength solar radiation. The instrument will produce atmospheric data for the vertical distribution of aerosol, ozone, nitrogen dioxide, water vapor, and oxygen. The details of the instrument design, data flow, and processing requirements are discussed.

Chu, W. P.↗

Vehicle path-planning in three dimensions using optics analogs for optimizing visibility and energy cost

Path planning is an important issue for space robotics. Finding safe and energy-efficient paths in the presence of obstacles and other constraints can be complex although important. High-level (large-scale) path planning for robotic vehicles was investigated in three-dimensional space with obstacles, accounting for: (1) energy costs proportional to path length; (2) turn costs where paths change trajectory abruptly; and (3) safety costs for the danger associated with traversing a particular path due to visibility or invisibility from a fixed set of observers. Paths optimal with respect to these cost factors are found. Autonomous or semi-autonomous vehicles were considered operating either in a space environment around satellites and space platforms, or aircraft, spacecraft, or smart missiles operating just above lunar and planetary surfaces. One class of applications concerns minimizing detection, as for example determining the best way to make complex modifications to a satellite without being observed by hostile sensors; another example is verifying there are no paths (holes) through a space defense system. Another class of applications concerns maximizing detection, as finding a good trajectory between mountain ranges of a planet while staying reasonably close to the surface, or finding paths for a flight between two locations that maximize the average number of triangulation points available at any time along the path.

Rowe, Neil C.↗

Application of satellite visible band data to high latitude oceans

Freshwater discharge in the Northeast Pacific contains very fine sediments that can be detected using Landsat Thematic Mapper (TM) and Multi-spectral Scanner (MSS) imagery. From the TM data, several new coastal circulation features were discovered in the northern Gulf of Alaska. Flow around a coastal island produces a myriad of dipole eddies which are important to the cross-shelf transport of salt and heat. They also serve as sites to test numerical models to allow a better understanding of coastal flows and eddy formation elsewhere. Detection of these dipole eddies from their sediment distributions has allowed the comparison of different spectral bands from six imaging satellite sensors for their abilities to describe these features. It is concluded that, in addition to the TM sensor's capability, the sediments can be detected with MSS and CZCS sensors, but not with AVHRR or DMSP. As a consequence of this comparison of satellite visible data, it is confirmed that the dipole eddies here exist under low flow conditions (less than 1000 cu m/sec).

Ahlnas, Kristina↗

Flight tests of a helmet-mounted display synthetic visibility system

A short flight test program was conducted using the NASA Langley Research Center's B737 Advanced Transport Operating Systems (ATOPS) research airplane to determine if pilots could land a transport category airplane under visual meteorological conditions (VMC) by reference to a synthetic visibility system. No external guidance was to be used. The program was undertaken jointly by NASA and the McDonnel-Douglas Corporation. The airplane was fitted with forward-looking television cameras fixed in the nose. Inputs from the television cameras were mixed with internally generated symbology and displayed to the pilot on helmet-mounted eyepieces. The pilot task was to execute a visual approach and landing. Two NASA and two McDonnel-Douglas engineering test pilots participated in the program completing over 200 landings in a 32-hour test program. Landings accomplished with the helmet-mounted display (HMD) were compared with visual landings for each pilot.

Yenni, Kenneth R.↗

Cloud parameters from GOES visible and infrared radiances during the FIRE Cirrus IFO, October 1986

Visible (VIS, 0.65 micron) and infrared (IR, 10.5 microns) channels on geostationary satellites are the key elements of the International Satellite Cloud Climatology Project (ISCCP). All daytime ISCCP cloud parameters are derived from a combination of VIS and IR data. Validation and improvement of the ISCCP and other cloud retrieval algorithms are important components of the First ISCCP Regional Experiment (FIRE) Intensive Field Observations (IFO). Data from the Cirrus IFO (October 19 to November 2, 1986) over Wisconsin are available for validating cirrus cloud retrievals from satellites. The Geostationary Operational Environmental Satellite (GOES) located over the Equator at approximately 100 deg W provided nearly continuous measurements of VIS and IR radiances over the IFO areas. The preliminary results of cloud parameters derived from the IFO GOES data are presented. Cloud attitudes are first derived using an algorithms without corrections for cloud emissivity. These same parameters will then be computed from the same data relying on an emissivity correction algorithm based on correlative data taken during the Cirrus IFO.

Heck, Patrick W.↗

Site comparison for optical visibility statistics in southern Arizona

One of the best locations in the continental United States for astronomical telescopes is southern Arizona. The mountains surrounding Tucson have clear skies 80 percent of the year, with image quality generally better than 2 seconds on peaks. Two of the existing observatory sites in this area are being considered as locations for one of the three Atmospheric Visibility Monitoring (AVM) observatories. These sites are Mount Lemmon and Mount Hopkins. A comparison of the characteristics of each of the sites is made here to identify the more desirable of the two locations. It is recommended that Mount Lemmon be selected as the Arizona site for this project.

Cowles, K. A.↗