SEARCH · Engineering Papers

Results for “velocity steps”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28

All sources NASA NTRS DOE OSTI

NASA NTRS2002

Analytical Simulations of Energy-Absorbing Impact Spheres for a Mars Sample Return Earth Entry Vehicle

Nonlinear dynamic finite element simulations were performed to aid in the design of an energy-absorbing impact sphere for a passive Earth Entry Vehicle (EEV) that is a possible architecture for the Mars Sample Return (MSR) mission. The MSR EEV concept uses an entry capsule and energy-absorbing impact sphere designed to contain and limit the acceleration of collected samples during Earth impact without a parachute. The spherical shaped impact sphere is composed of solid hexagonal and pentagonal foam-filled cells with hybrid composite, graphite-epoxy/Kevlar cell walls. Collected Martian samples will fit inside a smaller spherical sample container at the center of the EEV's cellular structure. Comparisons were made of analytical results obtained using MSC.Dytran with test results obtained from impact tests performed at NASA Langley Research Center for impact velocities from 30 to 40 m/s. Acceleration, velocity, and deformation results compared well with the test results. The correlated finite element model was then used for simulations of various off-nominal impact scenarios. Off-nominal simulations at an impact velocity of 40 m/s included a rotated cellular structure impact onto a flat surface, a cellular structure impact onto an angled surface, and a cellular structure impact onto the corner of a step.

Billings, Marcus Dwight↗

NASA NTRS1997

Altered astronaut lower limb and mass center kinematics in downward jumping following space flight

Astronauts exposed to the microgravity conditions encountered during space flight exhibit postural and gait instabilities upon return to earth that could impair critical postflight performance. The aim of the present study was to determine the effects of microgravity exposure on astronauts' performance of two-footed jump landings. Nine astronauts from several Space Shuttle missions were tested both preflight and postflight with a series of voluntary, two-footed downward hops from a 30-cm-high step. A video-based, three-dimensional motion-analysis system permitted calculation of body segment positions and joint angular displacements. Phase-plane plots of knee, hip, and ankle angular velocities compared with the corresponding joint angles were used to describe the lower limb kinematics during jump landings. The position of the whole-body center of mass (COM) was also estimated in the sagittal plane using an eight-segment body model. Four of nine subjects exhibited expanded phase-plane portraits postflight, with significant increases in peak joint flexion angles and flexion rates following space flight. In contrast, two subjects showed significant contractions of their phase-plane portraits postflight and three subjects showed insignificant overall changes after space flight. Analysis of the vertical COM motion generally supported the joint angle results. Subjects with expanded joint angle phase-plane portraits postflight exhibited larger downward deviations of the COM and longer times from impact to peak deflection, as well as lower upward recovery velocities. Subjects with postflight joint angle phase-plane contraction demonstrated opposite effects in the COM motion. The joint kinematics results indicated the existence of two contrasting response modes due to microgravity exposure. Most subjects exhibited "compliant" impact absorption postflight, consistent with decreased limb stiffness and damping, and a reduction in the bandwidth of the postural control system. Fewer subjects showed "stiff" behavior after space flight, where contractions in the phase-plane portraits pointed to an increase in control bandwidth. The changes appeared to result from adaptive modifications in the control of lower limb impedance. A simple 2nd-order model of the vertical COM motion indicated that changes in the effective vertical stiffness of the legs can predict key features of the postflight performance. Compliant responses may reflect inflight adaptation due to altered demands on the postural control system in microgravity, while stiff behavior may result from overcompensation postflight for the presumed reduction in limb stiffness inflight.

Clinical Trial↗

NASA NTRSDate not supplied

100 kHz High-Spectral-Resolution NO-PLIF Measurements for Compressible Flows

In the present work, we use a burst-mode laser and optical parametric oscillator system to perform high-spectral resolution NO-PLIF measurements of an underexpanded jet at a repetition-rate of 100 kHz, with the motivation of multi-parameter measurements of temperature, pressure, and velocity. The laser frequency of the 1064 nm seed laser for the burst-mode laser was scanned during the burst to cover two neighboring absorption line pairs near 226 nm. The peak PLIF signal intensity varies along the axial (z) direction of the underexpanded jet as the laser frequency is scanned, which we attribute to the collisional shift induced by the flow and only revealed due to the narrow linewidth of the laser. A pseudo-Voight fit is applied to the LIF excitation spectra on a pixel-by-pixel basis to measure the spectral position of the peak intensity for the two transition pairs and their amplitude. The spectral position of the peak intensity is used to derive a frequency shift, which is separated into its collisional and Doppler components using the axisymmetric nature of the flow field. The amplitude of the measured peaks is used for two-line rotational thermometry. Challenges for quantitative measurements using such an approach are discussed, including measuring the spatial variations in the energy distribution of the laser sheet at a 100 kHz repetition rate and uncertainty/variability in the step size during the fast frequency scan.

laser induced fluorescence↗

NASA NTRSDate not supplied

100 kHz High-Spectral-Resolution NO-PLIF Measurements for Compressible Flows

laser induced fluorescence↗

DOE OSTI2025

Uncertainty Quantification Enabled by Automatic Differentiation for Hydrodynamic Simulation of Shock‐to‐Detonation Transition in High Explosives

Quantifying the effects of uncertainty in a reactive burn model on the run-to-detonation time in high explosives (HEs) provides a robust methodology for assessing the probability of an HE failing the IHE qualification standard. Moreover, uncertainty quantification helps evaluate whether the model calibration accurately represents data outside the calibration set. This study uses a specialized hydrodynamic simulation code for modeling detonation to determine the run-to-detonation time of the HE PBX 9502 for various impact velocities. To quickly approximate uncertainties in the model, a surrogate was constructed using a Taylor series expansion centered at the mean of the input parameters. To obtain the sensitivities required for constructing the Taylor series, HYP-percomplex Automatic Differentiation (HYPAD) was implemented. HYPAD is a methodology for infusing existing codes with automatic differentiation capabilities by augmenting variables with one or more imaginary units to compute step-size independent partial derivatives. These derivatives are accurate to machine precision with respect to the implemented numerical algorithm, meaning their accuracy reflects that of the underlying method (e.g., integration or discretization schemes). Using reduced order modeling techniques, the mean and standard deviation of the run-to-detonation time of a shock within PBX 9502 were computed for a number of initial impact velocities. A weighted least squares regression was then performed to obtain a best fit curve and prediction interval for the computed statistics. Historical data points from explosively driven wedge tests were utilized to validate the prediction interval, ensuring its reliability in predicting future outcomes. With this prediction interval and a known safety constraint curve, the most probable point of failure and the probability of failure for the HE PBX 9502 were determined.

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2026

Theoretical background for a fast flow liquid metal divertor experiment

Tokamak Energy has developed a liquid metal experiment featuring a lithium loop that circulates lithium through the HIDRA stellarator at the University of Illinois at Urbana-Champaign. The loop includes a replaceable divertor module, designed to demonstrate fast, steady, open-surface liquid metal flow. The first-generation divertor module was deliberately kept simple—an open-surface chute—to enable modelling validation and establish a benchmark for future design iterations. This paper presents the theoretical foundations of the experimental design. Specifically, we identify module overflooding as the primary challenge and determine the limits of fluid velocity and magnetic field strength necessary to prevent it. The steady-state flow patterns are expected to exhibit relatively slow surface velocities, which do not fully align with the fast-flow concept. Nevertheless, the experiment is designed to achieve controllable, continuous open-surface flow within an operational fusion device, representing a significant step toward the development of liquid metal divertor technology.

Experiment↗

DOE OSTI2020

Calculation Of The First Moment Of Energy Using D-T Reactivity Formalisms Under The Maxwell-Boltzmann Distribution--Part II

Nuclear fusion science is an example of a scientific field with a rich history of expert involvement and scientific publications, which together, form an expert-knowledge base. One example of a nuclear fusion formalism is the utilization of published reaction rates from a variety of authors. Investigators for Deuterium- Tritium (D-T) ion fusion can choose from using frequently cited methods: the Bosch and Hal reactivity, thermonuclear reaction rates from Caughlan and Fowler, and the reactivity evaluation from Miley, Towner & Ivich which forms the basis of the Naval Research Lab (NRL) formulary. There are other choices available. Each of the reactivity formulations considered here, are based upon the Maxwell-Boltzmann velocity distribution for D-T fusion ion reactants. Numerical methods for computer codes simulating hot, energetic plasmas, include tabulations of the reactivity, and the first moment of energy. This report continues the step toward building understanding of nuclear fusion reactivity formalisms. It is part of a series of reports with the same goal, [5-10] and is the continuation of the Part I paper for defining the mathematical relationship of the first moment of D-T fusion ion kinetic energy, <$E$>, with the fusion cross-section, fusion reactivity and its derivative with ion-temperature. In Part I, three variants of the first moment <$E$> were analytically developed and explored: 1) constant cross-section, 2) a normalized first moment, and 3) a particular function of the first moment from Brysk. In Part II, attention is given to the definition of <$K$>, originally described as a ratio of moments from Brysk, and its relationship to the first moment definitions from Part I. One measure of the progress made in these documents is the identification that Brysk’s ratio of the second moment to the first moment ratio, <$K$>, does not correspond to his provided solution of the first moment of energy. Another measure of (our) progress from this work is the comparison of first moment variants. That comparison includes confirming the importance of cross sections defined in terms of energy. The analytical relationships we have developed among important physics quantities are useful tools in validation and verification (V&V). For example, we can calculate the kinetic energy as a mean or as a first moment, or as a function of the first moment. These analytically-determined values can be compared directly with numerically-determined values, supplied to the authors, representing <$E$>.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

NASA NTRS1987

Size and shape of solid fuel diffusion flames in very slow speed flows

The influence of very low speed forced flows on the size and shape of a diffusion flame adjacent to a solid fuel slab is studied experimentally and theoretically. Velocities in the range of 1.5 to 6.3 cm/s and O2 mole fractions (in the O2/N2 atmosphere) in the range of 0.15 to 0.19 were tested. The flames moved farther from the fuel surface as the flow velocity was reduced and closer to the sample as the O2 concentration was lowered. A corresponding theoretical model was solved using a two-dimensional Navier-Stokes system with a one-step finite-rate chemical reaction and surface radiative loss.

Chen, Chiun-Hsun↗

NASA NTRS1991

An experimental investigation of the separating/reattaching flow over a backstep

Reynolds number effects on the evolution of the turbulence structure in the recovery region of a turbulent separated flow generated by a backward-facing step were studied experimentally. Five different flow conditions and four Reynolds numbers were investigated. All single point measurements were conducted on the plane of symmetry of the wind tunnel starting at approximately x/h = 10 for each flow condition. The upper limit of the measuring domain depends upon the physical size of the tunnel and ranged from 50 to 114 step heights. It is apparent that most of the boundary layer recovery was captured by the experiment. Normal stresses, shear stress, mixing length scales and eddy viscosity are shown, while the higher order velocity products related to the diffusion of the turbulence energy are planned for latter stages of the data analysis.

Jovic, Srboljub↗

NASA NTRS2001

Seedless Laser Velocimetry Using Heterodyne Laser-Induced Thermal Acoustics

A need exists for a seedless equivalent of laser Doppler velocimetry (LDV) for use in low-turbulence or supersonic flows or elsewhere where seeding is undesirable or impractical. A compact laser velocimeter using heterodyne non-resonant laser-induced thermal acoustics (LITA) to measure a single component of velocity is described. Neither molecular (e.g. NO2) nor particulate seed is added to the flow. In non-resonant LITA two beams split from a short-pulse pump laser are crossed; interference produces two counterpropagating sound waves by electrostriction. A CW probe laser incident on the sound waves at the proper angle is directed towards a detector. Measurement of the beating between the Doppler-shifted light and a highly attenuated portion of the probe beam allows determination of one component of flow velocity, speed of sound, and temperature. The sound waves essentially take the place of the particulate seed used in LDV. The velocimeter was used to study the flow behind a rearward-facing step in NASA Langley Research Center's Basic Aerodynamics Research Tunnel. Comparison is made with pitot-static probe data in the freestream over the range 0 m/s - 55 m/s. Comparison with LDV is made in the recirculation region behind the step and in a well-developed boundary layer in front of the step. Good agreement is found in all cases.

Hart, Roger C.↗

NASA NTRS1997

Outer Planet Mission Studies Neptune Aerocapture

Current and previous studies of orbiter missions to the outer planets have clearly identified high-energy aerocapture as a critical and enabling technology. Aerocapture involves the use of aerodynamic lift to fly a trajectory through a planet's atmosphere to sufficiently decelerate an entry vehicle to capture into planetary orbit. In the past, numerous studies of different configurations of lifting entry vehicles were studied for various planetary orbiter missions which identified aerocapture as a feasible concept yet complex and technically challenging. In order to determine the feasibility of high-speed aerocapture at the outer planets, an accurate trajectory simulation of the flight vehicle is the critical first step in the proposed research. Vehicle response to aerodynamic loading must be predicted accurately in the trajectory simulations. For several Neptune orbiter missions currently under study at the Jet Propulsion Laboratory (JPL), entry velocities relative to the rotating atmosphere ranging from 25 to 30 km/sec, are to be expected. Preliminary trajectory analysis has identified the various flow regimes the entry vehicle is expected to fly in the 8 1% H2 and 19% He atmosphere of Neptune. The size and mass of the vehicle are also determined by the launch vehicle constraints and orbiter spacecraft requirements. For a given baseline arrival conditions of an inertial entry velocity of 28 km/sec and an entry mass of 400 kg, a medium lift (L/D = 1), axisymmetric biconic shaped vehicle was selected in order to satisfy entry corridor width requirements expected for Neptune aerocapture. The analysis summarized in this study indicates that a biconic entry vehicle is a feasible concept for a Neptune aerocapture orbiter mission. The preliminary entry trajectory simulations has demonstrated adequate entry corridor control authority. Furthermore, estimates of the stagnation point heating environment has enabled the preliminary selection of candidate lightweight ceramic TPS materials.

Wercinski, Paul F.↗

NASA NTRS2011

Deep Moonquake Focal Mechanisms: Recovery and Implications

A defining characteristic of deep moonquakes is their tendency to occur with tidal periodicity, prompting previous studies to infer that they are related to the buildup and release of tidal stress within the Moon. In studies of tidal forcing, a key constraint is the focal mechanism: the fault parameters describing the type of failure moonquakes represent. The quality of the lunar seismic data and the limited source/receiver geometries of the Apollo seismic network prohibit the determination of deep moonquake fault parameters using first-motion polarities, as is typically done in terrestrial seismology. Without being able to resolve tidal stress onto a known failure plane, we can examine only gross qualities of the tidal stress tensor with respect to moonquake occurrence, so we cannot fully address the role of tidal stress in moonquake generation. We will examine the extent to which shear (S) and compression (P) wave amplitude ratios can constrain moonquake fault geometry by determining whether, for a given cluster, there exists a focal mechanism that can produce a radiation pattern consistent with the amplitudes measured by the Apollo instruments. Amplitudes are read in the ray coordinate frame, directly from seismograms for which the P and S arrivals are clearly identifiable on all long-period channels of the four Apollo stations. We apply an empirical station correction to account for site effects and the differences between P- and S-wave attenuation. Instead of focusing on the best fitting solution only, we formulate the inverse problem using a falsification criterion: all source orientations that do not reproduce the observed SV/P ratios within an error margin derived from the uncertainty of amplitude readings are rejected. All others are accepted as possible solutions. The inversion is carried out using an exhaustive grid search on a regular grid with predefined step size, encompassing all possible combinations of strike, dip and slip. To assess the sensitivity of the inversion for the uncertainty of the lunar interior structure, we carry out repeated inversions with different velocity structures. Our data set consist of a total of 106 events from 25 deep moonquake clusters. The largest contribution of 37 events originates from the most active cluster, A001, while other clusters are represented by 1 to 9 events. Since the definition of a cluster implies that all events share the same source orientation, a comparison of the inversion results of all events from one cluster will reduce ambiguities of the inversion. Once we obtain a suite of fault parameters for a given source, we can attempt to further constrain the focal mechanism with refined analyses of tidal stresses and predictions based on synthetic seismograms.

Knapmeyer, Martin↗

NASA NTRS2013

A One-year, Short-Stay Crewed Mars Mission Using Bimodal Nuclear Thermal Electric Propulsion (BNTEP) - A Preliminary Assessment

A crewed mission to Mars poses a signi cant challenge in dealing with the physiolog- ical issues that arise with the crew being exposed to a near zero-gravity environment as well as signi cant solar and galactic radiation for such a long duration. While long sur- face stay missions exceeding 500 days are the ultimate goal for human Mars exploration, short round trip, short surface stay missions could be an important intermediate step that would allow NASA to demonstrate technology as well as study the physiological e ects on the crew. However, for a 1-year round trip mission, the outbound and inbound hy- perbolic velocity at Earth and Mars can be very large resulting in a signi cant propellant requirement for a high thrust system like Nuclear Thermal Propulsion (NTP). Similarly, a low thrust Nuclear Electric Propulsion (NEP) system requires high electrical power lev- els (10 megawatts electric (MWe) or more), plus advanced power conversion technology to achieve the lower speci c mass values needed for such a mission. A Bimodal Nuclear Thermal Electric Propulsion (BNTEP) system is examined here that uses three high thrust Bimodal Nuclear Thermal Rocket (BNTR) engines allowing short departure and capture maneuvers. The engines also generate electrical power that drives a low thrust Electric Propulsion (EP) system used for ecient interplanetary transit. This combined system can help reduce the total launch mass, system and operational requirements that would otherwise be required for equivalent NEP or Solar Electric Propulsion (SEP) mission. The BNTEP system is a hybrid propulsion concept where the BNTR reactors operate in two separate modes. During high-thrust mode operation, each BNTR provides 10's of kilo- Newtons of thrust at reasonably high speci c impulse (Isp) of 900 seconds for impulsive trans-planetary injection and orbital insertion maneuvers. When in power generation / EP mode, the BNTR reactors are coupled to a Brayton power conversion system allowing each reactor to generate 100's of kWe of electrical power to a very high Isp (3000 s) EP thruster system for sustained vehicle acceleration and deceleration in heliocentric space.

Burke, Laura A.↗

DOE OSTI2024

Galaxy bispectrum in the spherical Fourier-Bessel basis

The bispectrum, the three-point correlation in Fourier space, is a crucial statistic for studying many effects targeted by the next-generation galaxy surveys, such as primordial non-Gaussianity (PNG) and general relativistic (GR) effects on large scales. In this work we develop a formalism for the bispectrum in the spherical Fourier-Bessel (SFB) basis—a natural basis for computing correlation functions on the curved sky, as it diagonalizes the Laplacian operator in spherical coordinates. Working in the SFB basis allows for line-of-sight effects such as redshift space distortions and GR to be accounted for exactly, i.e., without having to resort to perturbative expansions to go beyond the plane-parallel approximation. Only analytic results for the SFB bispectrum exist in the literature given the intensive computations needed. We numerically calculate the SFB bispectrum for the first time, enabled by a few techniques: We implement a template decomposition of the redshift-space kernel Z 2 into Legendre polynomials, and separately treat the PNG and velocity-divergence terms. We derive an identity to integrate a product of three spherical harmonics connected by a Dirac delta function as a simple sum and use it to investigate the limit of a homogeneous and isotropic Universe. Furthermore, we present a formalism for convolving the signal with separable window functions and use a toy spherically symmetric window to demonstrate the computation and give insights into the properties of the observed bispectrum signal. While our implementation remains computationally challenging, it is a step toward a feasible full extraction of information on large scales via a SFB bispectrum analysis.

79 ASTRONOMY AND ASTROPHYSICS↗

NASA NTRS1984

A study of dynamic measurements made in the settling chamber of the Langley 0.3-meter transonic cryogenic tunnel

Tests have been conducted in a cryogenic wind tunnel settling chamber using a fast response instrumentation to measure the possible existence of temperature fronts due to a sudden or step change in the rate of liquid nitrogen injection into the circuit. No indications of such fronts were obtained using three different techniques to change the rate of nitrogen injection. The normalized pressure and velocity fluctuations at two total temperatures and over a large range of Mach numbers and Reynolds numbers were about 2 x 10 to the -7th to 2 x 10 to the -6th and about 1.8 to 3 percent, respectively. There was no evidence of liquid nitrogen droplets in the flow down to a total temperature of 140 K. The pressure fluctuation power spectra from a pressure transducer correlated with the fan blade passage through the eighth harmonic of the fundamental frequency.

Johnson, C. B.↗

NASA NTRS1992

Numerical simulation of shock-induced combustion/detonation

A numerical study is conducted to simulate the shock-induced combustion in premixed H2-air mixtures. Two types of bodies, blunt (spherical projectile) and sharp (wedge), are considered in the study. A nine-species, 18-step finite-rate H2-air chemical reaction mechanism coupled with the Navier-Stokes equations is solved. The flow field over the blunt body is found to be unsteady, when the projectile velocity is same as the Chapman-Jouget velocity of the mixture. The unsteadiness is caused by the periodic instabilities originating in the stagnation zone. Numerical results show good qualitative agreement with the ballistic range shadowgraph. In addition, the frequency of oscillations, determined by using the Fourier power spectrum, is found to be in good agreement with the experiment. The flow field over the wedge is found to be stable for the conditions considered in this study. The oblique detonation wave structure is investigated and the important flow features are discussed.

Singh, D. J.↗

NASA NTRS1995

Orbiter rarefied-flow reentry measurements from the OARE on STS-62

Acceleration data taken from the Orbital Acceleration Research Experiment (OARE) during reentry on STS-62 has been analyzed using calibration factors taken on-orbit. The data includes the flight regime from orbital altitudes down to about 100 km which covers the free-molecule-flow regime and some of the flow-transition into the hypersonic continuum. Ancillary data on orbiter position, orientation, velocity, and rotation rates have been used in models to transform the measured accelerations to the orbiter center-of-gravity, from which aerodynamic accelerations along the orbiter body axes have been calculated. Additional steps are discussed which remove residual offsets introduced in the measurements by unmodeled orbiter forces. The resulting aerodynamic accelerations and their ratios, A(sub z)/A(sub x), are discussed and compared with free-molecule-flow predictions of the aerodynamic coefficient ratios C(sub N)/C(sub A).

Blanchard, R. C.↗

NASA NTRS1996

Two-Dimensional Dynamic Simulation of a Continuous Foil Bearing

In this paper, the two dimensional(radial and circumferential) transient Navier-Stokes equations are used to solve the hydrodynamic problem in conjunction with the time dependent motion of the journal, and the deformable, spring supported foil. The elastic deformation of the foil and its supports are simulated by a finite element model. The time-dependent Navier-Stokes formulation is used to solve for the interaction between the fluid lubricant, the motion of the journal and the deformable foil boundary. The steady state, the quasi-transient and the full transient dynamic simulation of the foil-fluid journal interaction are examined on a comparative basis. For the steady state simulation, the fluid lubricant pressures are evaluated for a particular journal position, by means of an iterative scheme until convergence is achieved in both the fluid pressures and the corresponding foil deformation. For the quasi-transient case, the transient motion of the journal is calculated using a numerical integration scheme for the velocity and displacement of the journal. The deformation of the foil is evaluated through numerical iteration in feedback mode with the fluid film pressure generated by the journal motion until convergence at every time step is achieved. For the full transient simulation, a parallel real-time integration scheme is used to evaluate simultaneously the new journal position and the new deformed shape of the foil at each time step. The pressure of the fluid lubricant is iterated jointly with the corresponding journal position and the deformed foil geometry until convergence is achieved. A variable time-stepping Newmark-Beta integration procedure is used to evaluate the transient dynamics at each time step of the bearing.

Braun, M. Jack↗