Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “unreliability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28

Nearshore coastal mapping

Two test sites of different water quality and bottom topography were used to test for maximum water depth penetration using the Skylab S-192 MSS for measurement of nearshore coastal bathymetry. Sites under investigation lie along the Lake Michigan coastline where littoral transport acts to erode sand bluffs and endangers developments along 1,200 miles of shore, and on the west coast of Puerto Rico where unreliable shoal location and depth information constitutes a safety hazard to navigation. The S-192 and S-190A and B provide data on underwater features because of water transparency in the blue/green portion of the spectrum. Depth of 20 meters were measured with the S-192 in the Puerto Rico test site. The S-190B photography with its improved spatial resolution clearly delineates the triple sand bar topography in the Lake Michigan test site. Several processing techniques were employed to test for maximum depth measurement with least error. The results are useful for helping to determine an optimum spectral bandwidth for future space sensors that will increase depth measurements for different water attenuation conditions where a bottom reflection is detectable.

Polcyn, F. C.↗

System applications of the fault tolerant memory

Conventional memory technologies currently employed in aerospace applications contribute at least fifty percent to system unreliability (where the system includes CPU, I/O and memory). A fault tolerant memory performs both error correction and memory replacement at the bit plane level. To determine the effects of system design of using a fault tolerant memory in space applications, analysis was performed to determine tradeable hardware configurations that meet the reliability goals of each program. The candidate configurations, which included redundant elements of the computer system with both conventional and fault tolerant memories, were then traded in terms of selection criteria of cost, weight, volume, and power. These trade studies demonstrated that a fault tolerant memory provided significant advantages in terms of cost, weight, and volume. The memory selected for this analysis was a recently developed five fault tolerant memory.

Murphy, L. J.↗

Filamentation instability of a large amplitude whistler wave

Experiments performed in a pulsed afterglow plasma column with specified parameters revealed a filamentation instability of a large-amplitude whistler wave launched from antennas which produce a diverging energy flow in the linear regime. The difficult problem of diagnosing local density perturbations in a magnetized plasma in the presence of large-amplitude RF signals and nonuniform anisotropic electron distributions is discussed. Since Langmuir probes are too unreliable under these conditions, a microwave probe is developed based on the principle of the cavity shift method. The temporal and spatial evolution of the duct formation and wave propagation are shown. The role of the observed electron heating in the filamentation process is examined. The observed self-focusing process appears to be the result of the reinforcing interaction between the wave-induced density depression and the density-induced wave refraction. Interesting applications are noted.

Stenzel, R. L.↗

A study of Minnesota land and water resources using remote sensing

The author has identified the following significant results. Both LANDSAT imagery and digital data were studied for usefulness in surveying water conditions of Minnesota lakes. Initial consideration was given to analysis of LANDSAT image densities because of the low technologic and cost requirements. The techniques employed, however, yield inconsistent and unreliable results. A set of criteria are given for using LANDSAT data in identification of three categories of particulate contaminants in Lake Superior. A linear transformation giving the relationship between the residual LANDSAT intensities and concentrations of three contaminants was obtained from correlation of remote sensing data with insitu measurements. LANDSAT imagery was found useful in placing peat bogs and fens in their respective geologic settings. Artificial disturbances and drainageways in peatlands could be recognized and classified.

Shepherd, W. G.↗

Flow of liquid jets through closely woven screens

Previously developed analytical models relate pressure drop across a fine-mesh screen to throughflow velocity for duct systems. These models are shown to be unreliable for an unconfined flow, such as a free jet, impinging on a screen. A new model is developed for these kinds of systems, incorporating the important influence of liquid deflection by the screen. A new parameter, the boundary-layer blockage coefficient, is introduced. This coefficient, which depends on the screen weave geometry and the jet impingement angle, accounts for the increase in fluid path length through the screen resulting from the flow deflection. Comparisons are made with previous experimental studies to determine empirical values of the blockage coefficient. It is concluded that the new model reliably predicts the bulk flow and penetration characteristics of an impinging liquid jet interacting with a screen.

Dodge, F. T.↗

Flow of liquid jets through closely woven screens

Previously developed analytical models relate pressure drop across a fine-mesh screen to throughflow velocity for duct systems. These models are shown to be unreliable for an unconfined flow, such as a free jet, impinging on a screen. A new model is developed for these kinds of systems, incorporating the important influence of liquid deflection by the screen. A new parameter, the boundary layer blockage coefficient, is introduced. This coefficient, which depends on the screen weave geometry and the jet impingement angle, accounts for the increase in fluid path length through the screen resulting from the flow deflection. Comparisons are made with previous experimental studies to determine empirical values of the blockage coefficient. It is concluded that the new model reliably predicts the bulk flow and penetration characteristics of an impinging liquid jet interacting with a screen.

Dodge, F. T.↗

A reformulation of the Linear-Quadratic-Gaussian stochastic control problem for application to low thrust navigation analysis

The formulation of the classical Linear-Quadratic-Gaussian stochastic control problem as employed in low thrust navigation analysis is reviewed. A reformulation is then presented which eliminates a potentially unreliable matrix subtraction in the control calculations, improves the computational efficiency, and provides for a cleaner computational interface between the estimation and control processes. Lastly, the application of the U-D factorization method to the reformulated equations is examined with the objective of achieving a complete set of factored equations for the joint estimation and control problem.

Jacobson, R. A.↗

Large Area Crop Inventory Experiment (LACIE). Second-generation sampling strategy evaluation report

The author has identified the following significant results. The stratification procedure in the new sampling strategy for LACIE included: (1) correlation test results indicating that an agrophysical stratum may be homogeneous with respect to agricultural density, but not with respect to wheat density; and (2) agrophysical unit homogeneity test results indicating that with respect to agricultural density many agrophysical units are not homogeneous, but removal of one or more refined strata from any such current agrophysical unit can make the strata homogeneous. The apportioning procedure results indicated that the current procedure is not performing well and that the apportioned estimates of refined strata wheat area are often unreliable.

Basu, J. P.↗

ATS-6 satellite radio beacon measurements at Ootacamund, India

ATS-6 radio beacon measurements of modulation phase and Faraday rotation made at Ootacamund, India in 1975-1976 are discussed with emphasis on the measurement and analysis errors. The modulation-phase errors are insensitive to the geomagnetic field and provide an accurate determination of the total columnar electron content. Comparison of modulation-phase measurements at different frequencies shows a minor sensitivity to the ATS-6 pitch angle. For the low geomagnetic latitude and nearly transverse propagation conditions of Ootacamund, the use of a fixed conversion coefficient gives an unreliable Faraday content. However, the Faraday rotation measurements may be used to determine the shape factor F, which provides information about the electron density height profile.

Davies, K.↗

On reliable control system designs with and without feedback reconfigurations

This paper contains an overview of a theoretical framework for the design of reliable multivariable control systems, with special emphasis on actuator failures and necessary actuator redundancy levels. Using a linear model of the system, with Markovian failure probabilities and quadratic performance index, an optimal stochastic control problem is posed and solved. The solution requires the iteration of a set of highly coupled Riccati-like matrix difference equations; if these converge one has a reliable design; if they diverge, the design is unreliable, and the system design cannot be stabilized. In addition, it is shown that the existence of a stabilizing constant feedback gain and the reliability of its implementation is equivalent to the convergence properties of a set of coupled Riccati-like matrix difference equations. In summary, these results can be used for offline studies relating the open loop dynamics, required performance, actuator mean time to failure, and functional or identical actuator redundancy, with and without feedback gain reconfiguration strategies.

Birdwell, J. D.↗

Coatings for hybrid microcircuits

Silicone or parylene coatings protect circuits from damage by battery of military standard tests. PIND (Partical Impact Noise Detection) test proved unreliable in predicting failure for either coated or uncoated circuits.

Kinser, D. L.↗

The effects of thermal cycling on the thermal deformation of graphite-polyimide

The effects of repetitive thermal cycling on the thermal deformation of graphite-fiber-reinforced polyimide laminates are investigated. Unsymmetric and unidirectional laminate specimens were cycled in an oven between room temperature and 180 or 315 C five times, and temperature and deformation were recorded as a function of time in order to measure thermal deformation. The results of the lower temperature cycling reveal a hysteresis-like effect in the temperature-thermal deformation relation for a single cycle, while no differences are detected from one cycle to the next. The response of an eight-layer curved specimen is found to agree well with predictions based on a piecewise-linear lamination theory, however, four-layer laminate response could not be explained. The results of the high-temperature tests also indicate a dependence of the strain on whether the specimen was being heated or cooled, however quantitative results are considered unreliable, due to strain gage difficulties.

Hyer, M. W.↗

ATS6-satellite radio beacon measurements at Ootacamund, India

In August 1975 the ATS6 was repositioned at 35 deg E. Radio beacon measurements of time delay, Faraday rotation and signal amplitude, made at Ootacamund, India in October 1975, are discussed with emphasis on the problem of determining the Faraday content under essentially transverse propagation conditions. It is shown that at the low geomagnetic latitude of Ootacamund the use of a fixed conversion coefficient gives an unreliable Faraday content. It is shown also that corrections to the measured Faraday rotation are important because of pitch and yaw of the satellite, particularly at night when the rotation on 140 MHz can be of the order of 10 to 20 deg. The shape factor shows a low predawn minimum indicating the nearly complete erosion of the F2 layer peak. Amplitude scintillation usually decreases with increase of radio frequency but exceptions are discussed.

Davies, K.↗

Ceramic and coating applications in the hostile environment of a high temperature hypersonic wind tunnel

A Mach 7, blowdown wind tunnel was used to investigate aerothermal structural phenomena on large to full scale high speed vehicle components. The high energy test medium, which provided a true temperature simulation of hypersonic flow at 24 to 40 km altitude, was generated by the combustion of methane with air at high pressures. Since the wind tunnel, as well as the models, must be protected from thermally induced damage, ceramics and coatings were used extensively. Coatings were used both to protect various wind tunnel components and to improve the quality of the test stream. Planned modifications for the wind tunnel included more extensive use of ceramics in order to minimize the number of active cooling systems and thus minimize the inherent operational unreliability and cost that accompanies such systems. Use of nonintrusive data acquisition techniques, such as infrared radiometry, allowed more widespread use of ceramics for models to be tested in high energy wind tunnels.

Puster, R. L.↗

Helicopter propulsion system reliability and engine monitoring assessments

The major short life, unreliable, and high maintenance engine and power components and subsystems in current civil helicopters were identified. Categories included both reciprocating and turbine engines, single and multiple engine configurations, single and tandem trotor vehicles, and light, medium, and heavy helicopters. The major focus was on the following parameters: accident rate data; maintenance rate data; and direct operator input.

Murphy, J. A.↗

UDU/T/ covariance factorization for Kalman filtering

There has been strong motivation to produce numerically stable formulations of the Kalman filter algorithms because it has long been known that the original discrete-time Kalman formulas are numerically unreliable. Numerical instability can be avoided by propagating certain factors of the estimate error covariance matrix rather than the covariance matrix itself. This paper documents filter algorithms that correspond to the covariance factorization P = UDU(T), where U is a unit upper triangular matrix and D is diagonal. Emphasis is on computational efficiency and numerical stability, since these properties are of key importance in real-time filter applications. The history of square-root and U-D covariance filters is reviewed. Simple examples are given to illustrate the numerical inadequacy of the Kalman covariance filter algorithms; these examples show how factorization techniques can give improved computational reliability.

Thornton, C. L.↗

Reliability study of refractory gate gallium arsenide MESFETS

Refractory gate MESFET's were fabricated as an alternative to aluminum gate devices, which have been found to be unreliable as RF power amplifiers. In order to determine the reliability of the new structures, statistics of failure and information about mechanisms of failure in refractory gate MESFET's are given. Test transistors were stressed under conditions of high temperature and forward gate current to enhance failure. Results of work at 150 C and 275 C are reported.

Yin, J. C. W.↗

Process Research ON Semix Silicon Materials (PROSSM)

A cost effective process sequence was identified, equipment was designed to implement a 6.6 MW per year automated production line, and a cost analysis projected a $0.56 per watt cell add-on cost for this line. Four process steps were developed for this program: glass beads back clean-up, hot spray antireflective coating, wave soldering of fronts, and ion milling for edging. While spray dopants were advertised as an off the shelf developed product, they were unreliable with shorter than advertised shelf life.

Wohlgemuth, J. H.↗