SEARCH · Engineering Papers

Results for “tuning”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28

All sources NASA NTRS DOE OSTI

DOE OSTI2022

Tuning Intermediate Bands of Protective Coatings to Reach the Bulk-Recombination Limit of Stable Water-Oxidation GaP Photoanodes

Stable photoelectrochemical solar fuel production requires protective coatings to achieve effective charge separation, transport, and injection at the semiconductor–liquid interfaces, implying that the coating should energetically align its intermediate band (IB) with both the photoabsorber's band edge and co-catalyst's potentials. Yet approaches to adjust coating IB positions to accommodate various semiconductor light absorbers for constructing efficient and stable photoelectrodes have not been developed. In this report, three types of transition metal (M = Mn 2+ , Mn 3+ , and Cr 3+ ions) alloyed TiO2 coatings are discovered using atomic layer deposition (ALD). The IB energetics of these coatings are characterized by X-ray photoelectron spectroscopy and are found to be tunable inside the TiO 2 bandgap, through varying ALD growth conditions. By applying these coatings to n-type GaP and integrating with IrO x co-catalysts, the water-oxidation J–E performance is comparable to an uncoated corroding GaP photoanode. It reaches the bulk recombination limit of the GaP and achieves ≈28% absorbed photon to current efficiency under 475-nm light excitation (6.48 mW cm -2 ) and 100-h stable water oxidation. The outstanding performance and stability are attributed to the efficient charge separation and hole transport, as allowed by the energy alignment of the coating IB and the GaP valence band edge.

36 MATERIALS SCIENCE↗

DOE OSTI2023

Grain Boundary Phases in NbFeSb Half‐Heusler Alloys: A New Avenue to Tune Transport Properties of Thermoelectric Materials

Abstract Many thermoelectric materials benefit from complex microstructures. Grain boundaries (GBs) in nanocrystalline thermoelectrics cause desirable reduction in the thermal conductivity by scattering phonons, but often lead to unwanted loss in the electrical conductivity by scattering charge carriers. Therefore, modifying GBs to suppress their electrical resistivity plays a pivotal role in the enhancement of thermoelectric performance, zT . In this work, different characteristics of GB phases in Ti‐doped NbFeSb half‐Heusler compounds are revealed using a combination of scanning transmission electron microscopy and atom probe tomography. The GB phases adopt a hexagonal close‐packed lattice, which is structurally distinct from the half‐Heusler grains. Enrichment of Fe is found at GBs in Nb 0.95 Ti 0.05 FeSb, but accumulation of Ti dopants at GBs in Nb 0.80 Ti 0.20 FeSb, correlating to the bad and good electrical conductivity of the respective GBs. Such resistive to conductive GB phase transition opens up new design space to decouple the intertwined electronic and phononic transport in thermoelectric materials.

36 MATERIALS SCIENCE↗

DOE OSTI2023

Tuned Reactivity at the Lithium Metal–Argyrodite Solid State Electrolyte Interphase

Thin intermetallic Li 2 Te–LiTe 3 bilayer (0.75 µm) derived from 2D tellurene stabilizes the solid electrolyte interphase (SEI) of lithium metal and argyrodite (LPSCl, Li 6 PS 5 Cl) solid-state electrolyte (SSE). Tellurene is loaded onto a standard battery separator and reacted with lithium through single-pass mechanical rolling or transferred directly to SSE surface by pressing. State-of-the-art electrochemical performance is achieved, e.g., symmetric cell stable for 300 cycles (1800 h) at 1 mA cm -2 and 3 mAh cm -2 (25% DOD, 60 µm foil). Cryo-stage focused ion beam (Cryo-FIB) sectioning and Raman mapping demonstrate that the Li 2 Te–LiTe 3 bilayer impedes SSE decomposition. The unmodified Li–LPSCl interphase is electrochemically unstable with a geometrically heterogeneous reduction decomposition reaction front that extends deep into the SSE. Decomposition drives voiding in Li metal due to its high flux to the reaction front, as well as voiding in the SSE due to the associated volume changes. Analysis of cycled SSE found no evidence for pristine (unreacted) lithium metal filaments/dendrites, implying failure driven by decomposition phases with sufficient electrical conductivity that span electrolyte thickness. In conclusion, DFT calculations clarify thermodynamic stability, interfacial adhesion, and electronic transport properties of interphases, while mesoscale modeling examines interrelations between reaction front heterogeneity (SEI heterogeneity), current distribution, and localized chemo-mechanical stresses.

25 ENERGY STORAGE↗

DOE OSTI2023

Exciton Binding Energy in Organic Polymers: Experimental Considerations and Tuning Prospects

Discrepancies in reported values of exciton binding energy (E b ) for organic semiconductors (OSs) necessitate a comprehensive study. Traditionally, E b is defined as the difference between the transport gap (E t ) and the optical gap (E opt ). Here, the E b values of PBnDT‐TAZ polymer variants are determined using two commonly employed methods: a combination of ultraviolet photoemission spectroscopy and low‐energy inverse photoemission spectroscopy (UPS‐LEIPS) and solid‐state cyclic voltammetry (CV). E b values obtained by UPS‐LEIPS show low dispersion and no clear correlation with the polymer structure and thedielectric properties. In contrast, CV reveals a larger dispersion (200 meV‐1 eV) and an apparent qualitative E b ‐molecular structure correlation, as the lowest E b values are observed for oligo‐ethylene glycol side chains. This discrepancy is discussed by examining the implications of the traditional definition of E b . Additionally, the impact of both intrinsic and extrinsic factors contributing to the derived experimental values of E t is discussed. The differences in intrinsic and extrinsic factors highlight the context‐dependent nature of measurement when drawing global conclusions. Notably, the observed E b trend derived from CV is not intrinsic to the pure materials but likely linked to electrolyte swelling and associated changes in dielectric environment, suggesting that high‐efficiency single‐material organic photovoltaics with low E b may be possible via high dielectric materials.

36 MATERIALS SCIENCE↗

DOE OSTI2024

A Fluorinated Lewis Acidic Organoboron Tunes Polysulfide Complex Structure for High–Performance Lithium–Sulfur Batteries

Many challenges in lithium-sulfur (Li–S) batteries are associated with the radical change in lithium polysulfide (LPS) solubility during cycling, but chemical approaches to address such inconsistency are still lacking. Here, the use of a strong Lewis acidic fluorinated organoboron, tri(2,2,2-trifluoroethyl) borate (TFEB), is reported as a multi-functional mediator to simultaneously overcome multiple technical barriers in practical Li–S batteries. TFEB acts as an anion acceptor and forms strong molecular complexes with Lewis basic LPS. The TFEB-LPS complexes have consistent solubility across the full polysulfide spectrum and deliver several times improved better redox kinetics, unlocking a true redox catalytic mechanism that covers the majority of redox events in thick sulfur cathodes. As a result, Li–S batteries evaluated under practical conditions exhibit significantly improved discharge capacity, rate capability, and cycling stability with the addition of the TFEB additive. More importantly, TFEB also contributes to the stabilization of lithium anode in the presence of polysulfides by generating strong interfacial film. These attributes significantly improve the cycling stability of practical Li–S pouch cells, which are assembled with a unit energy density of 219 Wh kg –1 . Finally, the results provide new molecular insights on the design of unlocking solvation networks of practical Li–S systems.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

DOE OSTI2025

Structural Tuning of Self‐Conductive Polymer as Gas Diffusion Layer for Electrocatalytic Reactions at High Current

Electrocatalytic conversions offer a promising route for sustainable chemical production using renewable energy. Gas diffusion layers (GDLs) enable selective product formation at high current densities but suffer from electrolyte flooding, and polytetrafluoroethylene (PTFE)-based GDLs typically require metal conductive layers, which constrain catalyst development. A recently developed GDL configuration, electropolymerized poly(3,4-ethylenedioxythiophene) (PEDOT)-coated PTFE, demonstrates notable flooding resistance, but suffers from gas diffusion limitations at elevated currents due to limited gas diffusion through the PEDOT layer. Here, different dopants in PEDOT are exploited to modify the physical properties and enhance gas transport. ClO 4 − -doped PEDOT exhibits superior performance due to optimized physical structure, leading to increased gas permeance and faradaic efficiency (FE) for CO production during electrocatalytic CO 2 reduction. Further optimization of coverage and thickness achieved by adjusting charge density led to an optimal configuration at 33 mC cm −2 . This GDL supports various metal electrocatalysts and demonstrates FE CO of > 90% for over 150 h at −200 mA cm −2 using a commercial silver electrocatalyst. This work highlights the importance of GDL engineering in enhancing performance and durability for long-term electrocatalytic processes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2020

Supramolecular Tuning Enables Selective Oxygen Reduction Catalyzed by Cobalt Porphyrins for Direct Electrosynthesis of Hydrogen Peroxide

Abstract We report a supramolecular strategy for promoting the selective reduction of O 2 for direct electrosynthesis of H 2 O 2 . We utilized cobalt tetraphenylporphyrin (Co‐TPP), an oxygen reduction reaction (ORR) catalyst with highly variable product selectivity, as a building block to assemble the permanently porous supramolecular cage Co‐PB‐1(6) bearing six Co‐TPP subunits connected through twenty‐four imine bonds. Reduction of these imine linkers to amines yields the more flexible cage Co‐rPB‐1(6). Both Co‐PB‐1(6) and Co‐rPB‐1(6) cages produce 90–100 % H 2 O 2 from electrochemical ORR catalysis in neutral pH water, whereas the Co‐TPP monomer gives a 50 % mixture of H 2 O 2 and H 2 O. Bimolecular pathways have been implicated in facilitating H 2 O formation, therefore, we attribute this high H 2 O 2 selectivity to site isolation of the discrete molecular units in each supramolecule. The ability to control reaction selectivity in supramolecular structures beyond traditional host–guest interactions offers new opportunities for designing such architectures for a broader range of catalytic applications.

Smith, Peter T.↗

DOE OSTI2021

The Role of Metal Substitution in Tuning Anion Redox in Sodium Metal Layered Oxides Revealed by X‐Ray Spectroscopy and Theory

Abstract We investigate high‐valent oxygen redox in the positive Na‐ion electrode P2‐Na 0.67− x [Fe 0.5 Mn 0.5 ]O 2 (NMF) where Fe is partially substituted with Cu (P2‐Na 0.67− x [Mn 0.66 Fe 0.20 Cu 0.14 ]O 2 , NMFC) or Ni (P2‐Na 0.67− x [Mn 0.65 Fe 0.20 Ni 0.15 ]O 2 , NMFN). From combined analysis of resonant inelastic X‐ray scattering and X‐ray near‐edge structure with electrochemical voltage hysteresis and X‐ray pair distribution function profiles, we correlate structural disorder with high‐valent oxygen redox and its improvement by Ni or Cu substitution. Density of states calculations elaborate considerable anionic redox in NMF and NMFC without the widely accepted requirement of an A‐O‐A′ local configuration in the pristine materials (where A=Na and A′=Li, Mg, vacancy, etc.). We also show that the Jahn–Teller nature of Fe 4+ and the stabilization mechanism of anionic redox could determine the extent of structural disorder in the materials. These findings shed light on the design principles in TM and anion redox for positive electrodes to improve the performance of Na‐ion batteries.

Abate, Iwnetim↗

DOE OSTI2021

Heterometallic Actinide‐Containing Photoresponsive Metal‐Organic Frameworks: Dynamic and Static Tuning of Electronic Properties

Abstract Acquiring fundamental knowledge of properties of actinide‐based materials is a necessary step to create new possibilities for addressing the current challenges in the nuclear energy and nuclear waste sectors. In this report, we established a photophysics–electronics correlation for actinide‐containing metal‐organic frameworks (An‐MOFs) as a function of excitation wavelength, for the first time. A stepwise approach for dynamically modulating electronic properties was applied for the first time towards actinide‐based heterometallic MOFs through integration of photochromic linkers. Optical cycling, modeling of density of states near the Fermi edge, conductivity measurements, and photoisomerization kinetics were employed to shed light on the process of tailoring optoelectronic properties of An‐MOFs. Furthermore, the first photochromic MOF‐based field‐effect transistor, in which the field‐effect response could be changed through light exposure, was constructed. As a demonstration, the change in current upon light exposure was sufficient to operate a two‐LED fail‐safe indicator circuit.

Martin, Corey R.↗

DOE OSTI2022

Rational Design of Superconducting Metal Hydrides via Chemical Pressure Tuning**

Abstract The high critical superconducting temperatures ( T c s) of metal hydride phases with clathrate‐like hydrogen networks have generated great interest. Herein, we employ the Density Functional Theory‐Chemical Pressure (DFT‐CP) method to explain why certain electropositive elements adopt these structure types, whereas others distort the hydrogenic lattice, thereby decreasing the T c . The progressive opening of the H 24 polyhedra in MH 6 phases is shown to arise from internal pressures exerted by large metal atoms, some of which may favor an even higher hydrogen content that loosens the metal atom coordination environments. The stability of the LaH 10 and LaBH 8 phases is tied to stuffing of their shared hydrogen network with either additional hydrogen or boron atoms. The predictive capabilities of DFT‐CP are finally applied to the Y−X−H system to identify possible ternary additions yielding a superconducting phase stable to low pressures.

Hilleke, Katerina P.↗

DOE OSTI2022

Anode‐Free Lithium–Sulfur Cells Enabled by Rationally Tuning Lithium Polysulfide Molecules

Abstract The two major barriers of practical lithium–sulfur batteries are the poor reversibility of lithium‐metal anode and sluggish kinetics of sulfur cathode. Here, we report a simple yet cogent, molecular tailoring approach for lithium polysulfides, enabling a synergistic enhancement of anode reversibility and cathode kinetics. We show that SnI 4 coordinates with lithium polysulfides to form soluble complexes, resulting in a Li 2 SnS 3 ‐rich anode interphase layer. As Li 2 SnS 3 is stable against parasitic reactions and has a lower ionic resistance over cycling, the Li plating/stripping efficiency is greatly improved. In addition, the formation of soluble complexes between SnI 4 and lithium polysulfides play a non‐negligible role in suppressing the clustering behavior of lithium polysulfide molecules, resulting in a significant enhancement in sulfur conversion kinetics under lean electrolyte conditions. The synergistic improvement is validated in anode‐free, lean‐electrolyte pouch cells with a Li 2 S cathode that displays capacity retention of 78 % after 100 cycles.

Ren, Yuxun↗

DOE OSTI2022

Boosting the Activity of Pd Single Atoms by Tuning Their Local Environment on Ceria for Methane Combustion

Abstract Supported Pd single atom catalysts (SACs) have triggered great research interest in methane combustion yet with contradicting views on their activity and stability. Here, we show that the Pd SAs can take different electronic structure and atomic geometry on ceria support, resulting in different catalytic properties. By a simple thermal pretreatment to ceria prior to Pd deposition, a unique anchoring site is created. The Pd SA, taking this site, can be activated to Pd δ + (0< δ <2) that has greatly enhanced activity for methane oxidation: T 50 lowered by up to 130 °C and almost 10 times higher turnover frequency compared to the untreated catalyst. The enhanced activity of Pd δ + site is related to its oxygen‐deficient local structure and elongated interacting distance with ceria, leading to enhanced capability in delivering reactive oxygen species and decomposing reaction intermediates. This work provides insights into designing highly efficient Pd SACs for oxidation reactions.

Yang, Weiwei↗

DOE OSTI2020

Supramolecular Tuning Enables Selective Oxygen Reduction Catalyzed by Cobalt Porphyrins for Direct Electrosynthesis of Hydrogen Peroxide

Smith, Peter T.↗

DOE OSTI2020

Transition Metal Nitrides as Promising Catalyst Supports for Tuning CO/H 2 Syngas Production from Electrochemical CO 2 Reduction

The electrochemical carbon dioxide reduction reaction (CO 2 RR) to produce synthesis gas (syngas) with tunable CO/H 2 ratios has been studied by supporting Pd catalysts on transition metal nitride (TMN) substrates. Combining experimental measurements and density functional theory (DFT) calculations, Pd-modified niobium nitride (Pd/NbN) is found to generate much higher CO and H 2 partial current densities and greater CO Faradaic efficiency than Pd-modified vanadium nitride (Pd/VN) and commercial Pd/C catalysts. In-situ X-ray diffraction identifies the formation of PdH in Pd/NbN and Pd/C under CO 2 RR conditions, whereas the Pd in Pd/VN is not fully transformed into the active PdH phase. DFT calculations show that the stabilized *HOCO and weakened *CO intermediates on PdH/NbN are critical to achieving higher CO 2 RR activity. This work suggests that NbN is a promising substrate to modify Pd, resulting in an enhanced electrochemical conversion of CO 2 to syngas with a potential reduction in precious metal loading.

25 ENERGY STORAGE↗

DOE OSTI2021

The Role of Metal Substitution in Tuning Anion Redox in Sodium Metal Layered Oxides Revealed by X-Ray Spectroscopy and Theory

We investigate high-valent oxygen redox in the positive Na-ion electrode P2-Na 0.67-x [Fe 0.5 Mn 0.5 ]O 2 (NMF) where Fe is partially substituted with Cu (P2-Na 0.67-x [Mn 0.66 Fe 0.20 Cu 0.14 ]O 2 , NMFC) or Ni (P2-Na 0.67 -x[Mn 0.65 Fe 0.20 Ni 0.15 ]O 2 , NMFN). From combined analysis of resonant inelastic X-ray scattering and X-ray near-edge structure with electrochemical voltage hysteresis and X-ray pair distribution function profiles, we correlate structural disorder with high-valent oxygen redox and its improvement by Ni or Cu substitution. Density of states calculations elaborate considerable anionic redox in NMF and NMFC without the widely accepted requirement of an A-O-A' local configuration in the pristine materials (where A=Na and A'=Li, Mg, vacancy, etc.). We also show that the Jahn–Teller nature of Fe 4+ and the stabilization mechanism of anionic redox could determine the extent of structural disorder in the materials. These findings shed light on the design principles in TM and anion redox for positive electrodes to improve the performance of Na-ion batteries.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2021

Heterometallic Actinide-Containing Photoresponsive Metal-Organic Frameworks: Dynamic and Static Tuning of Electronic Properties

Acquiring fundamental knowledge of properties of actinide-based materials is a necessary step to create new possibilities for addressing the current challenges in the nuclear energy and nuclear waste sectors. Here in this report, we established a photophysics–electronics correlation for actinide-containing metal-organic frameworks (An-MOFs) as a function of excitation wavelength, for the first time. A stepwise approach for dynamically modulating electronic properties was applied for the first time towards actinide-based heterometallic MOFs through integration of photochromic linkers. Optical cycling, modeling of density of states near the Fermi edge, conductivity measurements, and photoisomerization kinetics were employed to shed light on the process of tailoring optoelectronic properties of An-MOFs. Furthermore, the first photochromic MOF-based field-effect transistor, in which the field-effect response could be changed through light exposure, was constructed. As a demonstration, the change in current upon light exposure was sufficient to operate a two-LED fail-safe indicator circuit.

36 MATERIALS SCIENCE↗

DOE OSTI2022

Rational Design of Superconducting Metal Hydrides via Chemical Pressure Tuning

The high critical superconducting temperatures (T c s) of metal hydride phases with clathrate-like hydrogen networks have generated great interest. Herein, we employ the Density Functional Theory-Chemical Pressure (DFT-CP) method to explain why certain electropositive elements adopt these structure types, whereas others distort the hydrogenic lattice, thereby decreasing the T c . The progressive opening of the H 24 polyhedra in MH 6 phases is shown to arise from internal pressures exerted by large metal atoms, some of which may favor an even higher hydrogen content that loosens the metal atom coordination environments. The stability of the LaH 10 and LaBH 8 phases is tied to stuffing of their shared hydrogen network with either additional hydrogen or boron atoms. Furthermore, the predictive capabilities of DFT-CP are finally applied to the Y-X-H system to identify possible ternary additions yielding a superconducting phase stable to low pressures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2022

Anode-Free Lithium–Sulfur Cells Enabled by Rationally Tuning Lithium Polysulfide Molecules

The two major barriers of practical lithium–sulfur batteries are the poor reversibility of lithium-metal anode and sluggish kinetics of sulfur cathode. Here, we report a simple yet cogent, molecular tailoring approach for lithium polysulfides, enabling a synergistic enhancement of anode reversibility and cathode kinetics. In this study, we show that SnI 4 coordinates with lithium polysulfides to form soluble complexes, resulting in a Li 2 SnS 3 -rich anode interphase layer. As Li 2 SnS 3 is stable against parasitic reactions and has a lower ionic resistance over cycling, the Li plating/stripping efficiency is greatly improved. In addition, the formation of soluble complexes between SnI 4 and lithium polysulfides play a non-negligible role in suppressing the clustering behavior of lithium polysulfide molecules, resulting in a significant enhancement in sulfur conversion kinetics under lean electrolyte conditions. The synergistic improvement is validated in anode-free, lean-electrolyte pouch cells with a Li 2 S cathode that displays capacity retention of 78 % after 100 cycles.

25 ENERGY STORAGE↗