Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “total variation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28
All sourcesNASA NTRSDOE OSTI
NASA NTRS1990

Thermal buckling and post-buckling of symmetric composite plates

The thermally induced buckling and postbuckling behavior of square and rectangular simply supported composite plates is examined using the Rayleigh-Ritz method in conjunction with the second variations of the total potential energy. Spatially uniform and nonuniform temperatures and laminates with material axes that are not aligned with the plate edges (skewed material axes) are considered. Results of the analysis are presented in graphic form.

Meyers, C. A.↗
NASA NTRS1991

Relativistic electron enhancements - Simultaneous measurements from synchronous and low altitude satellites

This paper presents, for the first time, simultaneous measurements of trapped relativistic electron enhancements at synchronous altitude and precipitating electrons in the bounce loss cone at low altitudes. The measurements show that the daily variations in the precipitation flux for L greater than 5 correlated well with the daily variations in the total flux at high altitude, both with respect to sudden enhancements as well as flux depletions. The daily averaged precipitating flux (E greater than 1 MeV) at L = 6.1 to 7.1 was about 0.3 percent of the daily averaged directional flux (E not less than 1.5 MeV) observed at synchronous altitude, whereas within narrow spikes the precipitating directional fluxes were often within a factor of 10 of the daily averaged trapped fluxes. Strong depletions in the synchronous altitude not less than 1.5 MeV electron intensities are shown to be associated with low-altitude measurements of the equatorward movement of precipitating spikes to lower L shells.

Imhof, W. L.↗
NASA NTRS1992

Buckling of imperfect, anisotropic, ring-stiffened cylinders under combined loads

The objectives of this study is to develop an analysis to predict loads of ring-stiffened anisotropic cylinders subject to axial compression, torsion and internal pressure. This structure is modeled as a branched shell. A nonlinear axisymmetric prebuckling equilibrium state is assumed which is amenable to exact solution within each branch. Axisymmetric geometric imperfections are included. Buckling displacements are represented by a Fourier series in the circumferential coordinate and the finite element method in the axial coordinate. Application of Trefftz criterion to the second variation of the total potential energy leads to a nonlinear eigenvalue problem for the buckling load and mode. Results are presented for both unstiffened and ring-stiffened cylinders in the form of buckling interaction diagrams. Imperfections can cause an unexpected buckling mode in the ring web which would not occur for the perfect structure, and pressurization diminishes the benefit of adding rings to the unstiffened shell to increase the buckling load. The implementation of the analysis methodology into a structural sizing algorithm is discussed.

Ley, Robert P.↗
NASA NTRS1992

Modeling of asteroidal dust production rates

The production rate of dust associated with the prominent Hirayama asteroid families and the background asteroidal population are modeled with the intent of using the families as a calibrator of mainbelt dust production. However, the dust production rates of asteroid families may be highly stochastic; there is probably more than an order of magnitude variation in the total area of dust associated with a family. Over 4.5 x 10(exp 9) years of collisional evolution, the volume (mass) of a family is ground down by an order of magnitude, suggesting a similar loss from the entire mainbelt population. Our collisional models show that the number of meteoroids deliverable to Earth also varies stochastically, but only by a factor of 2 to 3.

Durda, Daniel D.↗
NASA NTRS1993

Newly found evidence of Sun-climate relationships

Solar radiation cycles drive climatic changes intercyclically. These interdecadal changes were detected as variations in solar total irradiances over the time period of recorded global surface-air-temperature (SAT) and have been restored utilizing Earth Radiation Budget Channel 10C measurements (1978-1990), Greenwich Observatory faculae data (1874-1975), and Taipei Observatory Active Region data (1964-1991). Analysis of the two separate events was carried out by treating each as a discrete time series determined by the length of each solar cycle. The results show that the global SAT responded closely to the input of solar cyclical activities, S, with a quantitative relation of T = 1.62 * S with a correlation coefficient of 0.61. This correlation peaks at 0.71 with a built-in time lag of 32 months in temperature response. Solar forcing in interannual time scale was also detected and the derived relationship of T = 0.17 * S with a correlation coefficient of 0.66 was observed. Our analysis shows derived climate sensitivities approximately fit the theoretical feedback slope, 4T(sup 3).

Kim, Hongsuk H.↗
NASA NTRS1946

Experimental and Theoretical Studies of Surging in Continuous-Flow Compressors

Experiments have been conducted to determine the conditions that cause surging in compressors and to determine the effect of various installations and operating conditions on the character of the velocity and pressure variations occurring during surging. These investigations were made on three compressor units and the variation of static, total, and velocity pressure with time was recorded. In addition to the experimental studies, a simplified analysis was made to determine how instability of flow may occur in a compressor. Based on this analysis, an examination was made of several possible methods of inhibiting the occurrence of surging.

Bullock, Robert O↗
NASA NTRS1994

Buckling of imperfect, anisotropic, ring-stiffened cylinders under combined loads

The objective of this study is to develop an anlysis to predict buckling loads of ring-stiffened anisotropic cylinders subject to axial compression, torsion, and internal pressure. This structure is modeled as a branched shell. A nonlinear axisymmetric prebuckling equilibrium state is assumed which is amenable to an exact solution within each branch. Axisymmetric geometric imperfections are included. Buckling displacements are represented by a Fourier series in the circumferential coordination and the finite-element method in the axial coordinate. Application of the Trefftz criterion to the second variation of the total potential energy leads to a nonlinear eigenvalue problem for the buckling load and mode. Results are presented for both unstiffened and ring-stiffened cylinders in the form of buckling interaction diagrams. Imperfections can cause an unexpected buckling mode in the ring web which would not occur for the perfect structure, and pressurization diminishes the benefit of adding rings to the unstiffened shell to increase the buckling load. The implementation of the analysis methodology into a structural sizing algorithm is discussed.

Ley, Robert P.↗
NASA NTRS1993

Heliographic latitude dependence of the Sun's irradiance

It has recently been reported that the total radiative emission variations from solar type stars exceeds the currently solar constant variations (from spacecraft over the last decade) by a factor near 4. Aside from other remote alternatives, this suggests three clear possibilities: (1) the Sun may undergo irradiance variations several times larger than any we have seen; (2) our Sun is highly unusual with regard to its radiative output; or (3) our terrestrial position in the heliosphere provides a special vantage point which reduces the observed solar irradiance variations. We investigate the last possibility by considering the influence of observer latitude upon calculated irradiance variations using a simple model for emission from solar contrast features. We consider modeled sunspots, faculae, and network structures. As the latitude angle of the observer rises relative to the heliographic equator, sunspot deficit contributions diminish and facular plus network contributions escalate. We find that the observing latitude can influence the irradiance variations by a factor near 6. When we integrate the irradiance variations, over the celestial sphere, they average to 3 times the terrestrial effect, suggesting that the solar cycle luminosity variations are proportionally, 3 times larger than the solar constant variations. Thus we suggest the Sun's luminosity output varies even more strongly with the solar cycle than is apparent in the solar constant variations. The influence of the observer viewing angle relative to stellar spin axis, studied here, may be possible to investigate with a thorough statistical examination of other type stars. Additionally, the rotational modulation due to active regions (as a function of observer viewing angle) may also be a valuable are for future investigation.

Schatten, Kenneth H.↗
NASA NTRS1995

CME masses measured by the HELIOS spacecraft photometers

We have cataloged 160 CMEs detected in the HELIOS 1 and 2 90 deg zodiacal light photometers observed from 1975-1985. The HELIOS 1 and 2 spacecraft orbited from 0.3 to 1.0 AU on 6-month orbits. From the photometer observations of Thomson-scattered light in the inner heliosphere, we have determined CME masses for these events using two methods: (1) by integration over the contours drawn between the three photometers at a given time; and (2) by integration of the mass flow over time past a given photometer. The second method, not readily available using coronagraph observations, is derived from CME speeds measured by using the timing of the peak CME brightness from the 16 deg to 31 deg sets of photometers. The two different HELIOS methods of determining CME mass are consistent with one another for individual CMEs. We find that the CME mass values range from 10(exp 15)g to nearly 10(exp 17)g. We compare the mass distributions of HELIOS-measured CMEs with those from coronagraphs and find that CMEs measured by HELIOS over the same time interval are generally more massive. The solar cycle variation of the total CME mass present in the heliosphere varies by over a factor of approximately 15 from solar minimum to solar maximum. Slightly more massive CMEs carry the bulk of the CME mass during maximum. The total CME mass at solar maximum is found to be near 15% of the total solar wind mass.

Jackson, B. V.↗
NASA NTRS1997

Development of a Model Based Technique for Gear Diagnostics using the Wigner-Ville method

Imperfections in gear tooth geometry often result from errors in the manufacturing process or excessive material wear during operation. Such faults in the gear tooth geometry can result in large vibrations in the transmission system, and, in some cases, may lead to early failure of the gear transmission system. This report presents the study of the effects of imperfection in gear tooth geometry on the dynamic characteristics of a gear transmission system. The faults in the gear tooth geometry are modeled numerically as the deviation of the tooth profile from its original involute geometry. The changes in gear mesh stiffness due to various profile and pattern variations are evaluated numerically. The resulting changes in the mesh stiffness are incorporated into a computer code to simulate the dynamics of the gear transmission system. A parametric study is performed to examine the sensitivity of gear tooth geometry imperfections on the vibration of a gear transmission system. The parameters variations in this study consist of the magnitude of the imperfection, the pattern of the profile variation, and the total number of teeth affected. Numerical results from the dynamic simulations are examined in both the time and the frequency domains. A joint time-frequency analysis procedure using the Wigner-Ville Distribution is also introduced to identify the location of the damaged tooth from the vibration signature. Numerical simulations of the system dynamics with gear faults were compared to experimental results. An optimal tracker was introduced to quantify the level of damage in the gear mesh system. Conclusions are drawn from the results of this numerical study.

Choy, F.↗
NASA NTRS2001

Urban and Rural Ozone Pollution Over Lusaka (Zambia, 15.5S, 25E) During SAFARI-2000 (September 2000)

In early September, throughout south central Africa, seasonal clearing of dry vegetation and the production of charcoal for cooking leads to intense smoke haze and ozone formation. Ozone soundings made over Lusaka during a six-day period in early September 2000 recorded layers of high ozone (greater than 125 ppbv at 5 km) during two stagnant periods, interspersed by a frontal passage that reduced boundary layer ozone by 30 percent. Smoke aerosol column variations aloft and total ozone were monitored by a sun photometer. During the 6-day measurement period, surface ozone concentrations ranged from 50-95 ppbv and integrated tropospheric ozone from the soundings was 39- 54 Dobson Units (note 1.3 km elevation at the launch site). High ozone concentrations above the mixed and inversion layers were advected from rural burning regions in western Zambia where SAFARI aircraft and ground-based instruments observed intense biomass fires and elevated aerosol and trace gas amounts. TOMS tropospheric ozone and smoke aerosols products show the distribution of biomass burning and associated pollution throughout southern Africa in September 2000. Animations of satellite images and trajectories confirm pollutant recirculation over south central African fires, exit of ozone from Mozambique and Tanzania to the Indian Ocean and the characteristic buildup of tropospheric ozone over the Atlantic from western African outflow.

Thompson, Anne M.↗
NASA NTRS2001

Evidence for the Widespread Presence of Liquid-Phase Particles During the 1999-2000 Arctic Winter

In-situ Multi-Angle Spectrometer Probe (MASP) particle measurements have been analyzed to determine the typical behaviour of sulphate particles during the SOLVE campaign. The analysis has focussed on variations in the total particle concentration measured by MASP, which is a diagnostic that is primarily sensitive to the growth of small particles (those which are initially smaller than 0.2 micrometers in radius). At all levels of the stratosphere, the total MASP concentration varies continuously with temperature. This behaviour is well-reproduced by assuming that the sulphate aerosols are liquid ternary solutions, but cannot be reproduced if the aerosol is assumed to be frozen. This liquid-like behaviour is apparent for all measurements made during SOLVE, both inside and outside the vortex, and even at the coldest temperatures sampled during the campaign. The only anomalous measurements were made during the flight of January 14th, 2001; however, this midlatitude flight is very unlikely to contain SAT particles based on the recent warm temperatures experienced by the air. At the levels with the coldest measured temperatures, at least 90% of the particles grow as liquids. Therefore, the freezing that occurred during the 1999-2000 Arctic winter was selective, causing most of the particles to remain liquid even in the presence of a small number of frozen particles.

Drdla, K↗
NASA NTRS2002

Satellite Observations of Solar Irradiance and Sun-Climate Impacts

Solar activity is now near its maximum, with events such as the 2001 "Bastille Day Event", a Coronal Mass Ejection which merited a full session at AGUs annual meeting - and two major sunspot groupings earlier this year, with associated variations in TSI (Total Solar Irradiance). We discuss recent satellite measurements of TSI by ACRIM 2 and 3 and Virgo, and new precision observations of TSI and SSI (Solar Spectral Irradiance) expected from the SORCE mission, planned to launch in fall 2002. SSI has been added to TSI as a required EOS and NPOESS measurement because different spectral components provide energy inputs to different components of the climate system - UV into upper atmosphere and ozone, IR into lower atmosphere and clouds, and Visible into the biosphere. Succeeding satellite missions being planned for 2006 and 2010 will continue to monitor both TSI and SSI. We summarize current ideas about the potential impact of solar variability on Earth's climate on time scales from days to decades to centuries.

Cahalan, Robert↗
NASA NTRS2002

Satellite Observations of Solar Irradiance and Sun-Climate Impacts

Solar activity is now near its maximum, with events such as the 2001 "Bastille Day Event", a Coronal Mass Ejection which merited a full session at AGO'S annual meeting - and two major sunspot groupings earlier this year, with associated variations in TSI (Total Solar Irradiance). We discuss recent satellite measurements of TSI by ACRIM 2 and 3 And Virgo, and new precision observations of TSI and SSI (Solar Spectral Irradiance) expected from the SORCE mission, planned to launch in fall 2002. SSG has been added to TSI as a required EOS and NPOESS measurement because different spectral components provide energy inputs to different components of the climate system - UV into upper atmosphere and ozone, IR into lower atmosphere and clouds, and Visible into the biosphere. Succeeding satellite missions being planned for 2006 and 2010 will continue to monitor both TSI and SSI. We summarize current ideas about the potential impact of solar variability on Earth's climate on time scales from days to decades to centuries.

Cahalan, R.↗
NASA NTRS2010

Optimizing a Laser Process for Making Carbon Nanotubes

A systematic experimental study has been performed to determine the effects of each of the operating conditions in a double-pulse laser ablation process that is used to produce single-wall carbon nanotubes (SWCNTs). The comprehensive data compiled in this study have been analyzed to recommend conditions for optimizing the process and scaling up the process for mass production. The double-pulse laser ablation process for making SWCNTs was developed by Rice University researchers. Of all currently known nanotube-synthesizing processes (arc and chemical vapor deposition), this process yields the greatest proportion of SWCNTs in the product material. The aforementioned process conditions are important for optimizing the production of SWCNTs and scaling up production. Reports of previous research (mostly at Rice University) toward optimization of process conditions mention effects of oven temperature and briefly mention effects of flow conditions, but no systematic, comprehensive study of the effects of process conditions was done prior to the study described here. This was a parametric study, in which several production runs were carried out, changing one operating condition for each run. The study involved variation of a total of nine parameters: the sequence of the laser pulses, pulse-separation time, laser pulse energy density, buffer gas (helium or nitrogen instead of argon), oven temperature, pressure, flow speed, inner diameter of the flow tube, and flow-tube material.

Arepalli, Sivaram↗
NASA NTRS2011

All-Sky Monitoring of Variable Sources with Fermi GBM

Using the Gamma ray Burst Monitor (GBM) on Fermi, we monitor the transient hard X-ray/soft gamma ray sky. The twelve GBM NaI detectors span 8 keV to 1 MeV, while the two BGO detectors span 150 keV to 40 MeV. We use the Earth occultation technique to monitor a number of sources, including X-ray binaries, AGN, and solar flaring activity. Our monitoring reveals predictable and unpredictable phenomena such as transient outbursts and state changes. With GBM we also track the pulsed flux and spin frequency of accretion powered pulsars using epoch-folding techniques. Searches for quasi-periodic oscillations and X-ray bursts are also possible with GBM all-sky monitoring. Highlights from the Earth Occultation and Pulsar projects will be presented including our recent surprising discovery of variations in the total flux from the Crab. Inclusion of an all-sky monitor is crucial for a successful future X-ray timing mission.

Wilson-Hodge, Colleen A.↗
NASA NTRS2005

Elastic-Tether Suits for Artificial Gravity and Exercise

Body suits harnessed to systems of elastic tethers have been proposed as means of approximating the effects of normal Earth gravitation on crewmembers of spacecraft in flight to help preserve the crewmembers physical fitness. The suits could also be used on Earth to increase effective gravitational loads for purposes of athletic training. The suit according to the proposal would include numerous small tether-attachment fixtures distributed over its outer surface so as to distribute the artificial gravitational force as nearly evenly as possible over the wearer s body. Elastic tethers would be connected between these fixtures and a single attachment fixture on a main elastic tether that would be anchored to a fixture on or under a floor. This fixture might include multiple pulleys to make the effective length of the main tether great enough that normal motions of the wearer cause no more than acceptably small variations in the total artificial gravitational force. Among the problems in designing the suit would be equalizing the load in the shoulder area and keeping tethers out of the way below the knees to prevent tripping. The solution would likely include running tethers through rings on the sides. Body suits with a weight or water ballast system are also proposed for very slight spinning space-station scenarios, in which cases the proposed body suits will easily be able to provide the equivalency of a 1-G or even greater load.

Torrance, Paul↗
NASA NTRS2018

Ice Crystal Icing Physics Study using a NACA 0012 Airfoil at the National Research Council of Canada's Research Altitude Test Facility

This paper presents results from a study of the fundamental physics of ice-crystal ice accretion using a NACA 0012 airfoil at the National Research Council of Canada (NRC) Research Altitude Test Facility in August 2017. These tests were a continuation of work which began in 2010 as part of a joint collaboration between NASA and NRC. The research seeks to generate icing conditions representative of those that occur inside a jet engine when ingesting ice crystals. In this test, an airfoil was exposed to mixed-phase icing conditions and the resulting ice accretions were recorded and analyzed. This paper details the specific objectives, procedures, and measurements which included the aero-thermal and cloud measurements. The objectives were built upon observations and hypothesis generated from several previous test campaigns regarding mixed-phase ice-crystal icing. The specific objectives included (A) ice accretions under different wet-bulb temperatures, (B) investigations of steady-state ice shapes previously reported in the literature, (C) total water content variations in search of a threshold for accretion, and (D) probe characterization related to measuring melt fraction which is important to characterize the mixed-phase condition. The resulting ice accretions and conditions leading to such accretions are intended to help extend NASA’s predictive ice-accretion codes to include conditions occurring in engine ice-crystal icing.

Icing↗