Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “tectonics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28

Tectonics of the Galileo Regio on Ganymede

The surface of Ganymede consists of dark cratered terrain, and groved terrain. The dark cratered terrains form polygonal units, the largest of which is Galileo Regio, the surface of which is transected by furrows, smooth floored valleys bounded by relatively sharp parallel ridges. The most apparent of them are grouped together and form an apparently arcuate system of subparallel furrows which was mapped using Voyager pictures and plotted on a map using a stereographic projection. With this kind of projection, the main furrow system is not arcuate, but rectilinear. Observations strongly suggest that the Galileo Regio furrow systems are not of impact origin and appear to be irrelevant to discussions about the basins' morphology or evolution of planetary lithosphere determined from multiring structures.

Thomas, P. G.↗

Tectonics of the Valhalla Structure on Callisto

The surficial morphology of Callisto is dominated by large concentric patterns of ridges, scarps, and furrows. The largest one, Valhalla, shows a smooth central area 350 km in radius, surrounded by concentric sinuous ridges which extend as far as 600km from the center. Beyond the ridged area, scarps and furrows are observed as far as 2000 km. The global azimuthal distribution of the scarps and furrows of the outer ring (beyond 700 km from the center) was analyzed. It is proposed that the local geometry and the global distribution of scarps and furrows around Valhalla are the results of the reactivation of an old pattern by the Valhalla event. The coincidence of these local directions of a preexisting pattern (NW-SE and NE-SW) with the directions of the grids observed on most bodies observed so far in the solar system would indicate that this local pattern is a part of a global calistean grid.

Thomas, P. G.↗

A geometric analysis of surface deformation - Implications for the tectonic evolution of Ganymede

The identification of various types of surface deformation of Ganymede by a geometric study of the furrow system and an analysis of circularity of impact craters is addressed. The hypothesis that the furrow system was initially concentric and that the present configuration of the furrows provides a measure of lateral motion of dark terrain is tested by determining the present centers of the furrow system in several dark terrain blocks and observing the amount of deformation in bright terrain regions which separate these blocks. An upper scale limit is placed on the amount of extension associated with bright terrain formation by using the deviation from circularity of impact craters to calculate the strain field around wedge-shaped regions of bright terrain. Penetrative deformation in Ganymede's lithosphere is identified by examining the circularity of impact craters in dark terrain.

Zuber, M. T.↗

Tectonic rotations within the Rio Grande rift - Evidence from paleomagnetic studies

Paleomagnetic studies on Miocene Pliocene volcanic rocks from the Espanola basin of the Rio Grande rift, New Mexico, reveal directions discordant form the expected mean direction for North America. The Paliza Canyon Formation, Tschicoma Formation, and Lobato Basalt, all sampled in the Jemez Mountains west of the Pajarito fault zone, have mean declinations east of the expected mean. The Cerros del Rio volcanics, lying east of the Pajarito fault zone, have a westerly declination. Combined with published data on the Santa Fe Group sediments east of the fault zone, and the Valles Rhyolite, west of the fault zone, distinct rotations of the two areas are evident. The western block has rotated clockwise 12 deg, while the eastern block shows 16 deg of conter-clockwise motion. Differential rotations of 25-30 deg are calculated between the two blocks; 4 deg/m.y. is the minimum differential rotation for the past 5 m.y. Geologic explanations for these rotations include the opening of the Rio Grande rift in response to clockwise rotation of the Colorado Plateau and significant left slip along the Rio Grande rift.

Brown, L. L.↗

A diffuse plate boundary model for Indian Ocean tectonics

It is suggested that motion along the virtually aseismic Owen fracture zone is negligible, so that Arabia and India are contained within a single Indo-Arabian plate divided from the Australian plate by a diffuse boundary. The boundary is a zone of concentrated seismicity and deformation commonly characterized as 'intraplate'. The rotation vector of Australia relative to Indo-Arabia is consistent with the seismologically observed 2 cm/yr of left-lateral strike-slip along the Ninetyeast Ridge, north-south compression in the Central Indian Ocean, and the north-south extension near Chagos.

Wiens, D. A.↗

Mars - Thickness of the lithosphere from the tectonic response to volcanic loads

The response to loading of the elastic lithosphere of Mars by seven large volcanic features is estimated based on the hypothesis of a flexural origin for a definable set of load-concentric graben. From the locations of such graben, or from their absence, the lithospheric thickness and flexural rigidity are inferred. For the Tharsis montes, Alba Patera, and Elysium Mons, elastic lithospheric thicknesses at the time of loading range from 20 to 50 km, assuming a Young's modulus of a trillion dyn/sq cm. The thickness exceeded 120 km beneath Olympus Mons and Isidis Planitia. The corresponding ranges in flexural rigidity are approximately 10 to the 30th to 31st dyn cm and greater than 10 to the 32nd dyn cm, respectively. These results indicate a local thinning of the lithosphere beneath portions of the central regions of the Tharsis and Elysium volcanic provinces at the time of loading-induced fracturing.

Comer, R. P.↗

A study of tectonic activity in the Basin-Range Province and on the San Andreas Fault. No. 1: Kinematics of Basin-Range intraplate extension

Strain rates assessed from brittle fracture and total brittle-ductile deformation measured from geodetic data were compared to estimates of paleo-strain from Quaternary geology for the intraplate Great Basin part of the Basin-Range, western United States. These data provide an assessment of the kinematics and mode of lithospheric extension that the western U.S. Cordillera has experienced from the past few million years to the present. Strain and deformation rates were determined by the seismic moment tensor method using historic seismicity and fault plane solutions for sub-regions of homogeneous strain. Contemporary deformation in the Great Basin occurs principally along the active seismic zones. The integrated opening rate across the entire Great Basin is accommodated by E-E extension at 8 to 10 mm/a in the north that diminishes to NW-SE extension of 3.5 mm/a in the south. Zones of maximum lithospheric extension correspond to belts of thin crust, high heat flow, and Quaternary basaltic volcanism, suggesting that these parameters are related through mechanism of extension such as a stress relaxation, allowing bouyant uplift and ascension of magmas.

Eddington, P. K.↗

A study of tectonic activity in the Basin-Range Province and on the San Andreas Fault. No. 3: Kinematics of Great Basin intraplate extension from earthquake, geodetic and geologic information

Strain rates assessed from brittle fracture, associated with earthquakes, and total brittle-ductile deformation measured from geodetic data were compared to paleostrain from Quaternary geology for the intraplate Great Basin of the western United States. These data provide an assessment of the kinematics and mode of lithospheric extension that the western U.S. Cordillera has experienced in the last 5 to 10 million years. Strain and deformation rates were determined by the seismic moment tensor method using historic seismicity and fault plane solutions. Contemporary deformation of the Great Basin occurs principally along the active seismic zones. The earthquake related strain shows that the Great Basin is characterized by regional E-W extension at 8.4 mm/a in the north that diminishes to NW-SE extension of 3.5 mm/a in the south. Zones of maximum extension correspond to belts of shallow crust, high heat flow, and Quaternary basaltic volcanism, suggesting that these parameters are related through an effect such as a stress relaxation allowing bouyant uplift and ascension of magmas.

Eddington, P. K.↗

Archean foreland basin tectonics in the Witwatersrand, South Africa

The Witwatersrand Basin of South Africa is the best-known of Archean sedimentary basins and contains some of the largest gold reserves in the world. Sediments in the basin include a lower flysch-type sequence and an upper molassic facies, both of which contain abundant silicic volcanic detritus. The strata are thicker and more proximal on the northwestern side of the basin which is, at least locally, bound by thrust faults. These features indicate that the Witwatersrand strata may have been deposited in a foreland basin and a regional geologic synthesis suggests that this basin developed initially on the cratonward side of an Andean-type arc. Remarkably similar Phanerozoic basins may be found in the southern Andes above zones of shallow subduction. It is suggested that the continental collision between the Kaapvaal and Zimbabwe Cratons at about 2.7 Ga caused further subsidence and deposition in the Witwatersrand Basin. Regional uplift during this later phase of development placed the basin on the cratonward edge of a collision-related plateau, now represented by the Limpopo Province. Similarities are seen between this phase of Witwatersrand Basin evolution and that of active basins north of the Tibetan Plateau. The geologic evidence does not agree with earlier suggestions that the Witwatersrand strata were deposited in a rift or half-graben.

Burke, K.↗

Tectonic evolution of greenstone-Gneiss association in Dharwar Craton, South India: Problems and perspectives for future research

The two fold stratigraphic subdivision of the Archean-Proterozoic greenstone-gneiss association of Dharwar craton into an older Sargur group (older than 2.9 Ga.) and a younger Dharwar Supergroup serves as an a priori stratigraphic model. The concordant greenstone (schist)-gneiss (Peninsular gneiss) relationships, ambiguities in stratigraphic correlations of the schist belts assigned to Sargur group and difficulties in deciphering the older gneiss units can be best appreciated if the Sargur group be regarded as a trimodal association of: (1) ultrabasic-mafic metavolcanics (including komatiites), (2) clastic and nonclastic metasediments and paragneisses and (3) mainly tonalite/trondhemite gneisses and migmatites of diverse ages which could be as old as c. 3.4 ga. or even older. The extensive occurrence of this greenstone-gneiss complex is evident from recent mapping in many areas of central and southern Karnataka State.

Rao, Y. J. B.↗

Tectonic setting and evolution of late Archaean greenstone belts of Superior Province, Canada

Late Archean (3.0-2.5 Ga) greenstone belts are a major component of the Superior Province of the Canadian Shield where alternating, metavolcanic - rich and metasedimentary - rich subprovinces form a prominent central striped region bordered in part by high-grade gneiss subprovinces, the Pikiwitonei and Minto in the north, and the Minnesota River Valley in the south. The high-grade gneiss subprovinces are characterized by granulite facies gneiss of plutonic and supracrustal origin, and by abundant plutonic rocks. Minnesota River Valley has rocks older than 3.5 Ga; absolute ages of Pikiwitonei and Minto rocks are unknown but Minto does have north-south structural trends distinctive from the dominant east-west structures of Superior Province. A discussion follows.

Card, K. D.↗

Tectonics of some Amazonian greenstone belts

Greenstone belts exposed amid gneisses, granitoid rocks, and less abundant granulites along the northern and eastern margins of the Amazonian Craton yield Trans-Amazonican metamorphic ages of 2.0-2.1 Ga. Early proterozoic belts in the northern region probably originated as ensimatic island arc complexes. The Archean Carajas belt in the southeastern craton probably formed in an extensional basin on older continental basement. That basement contains older Archean belts with pillow basalts and komatiites. Belts of ultramafic rocks warrant investigatijon as possible ophiolites. A discussion follows.

Gibbs, A. K.↗

A continuous record of tectonic evolution from 3.5 Ga to 2.6 Ga in Swaziland and northern Natal

The approx. 3.5 Ga-old bimodal suite underlying an extensive area in southwestern Swaziland comprises the oldest-dated sialic rocks in the Kaapvaal structural province. The suite consists of leucocratic, layered tonalitic-trondhjemitic gneisses and amphibolites characterized by the effects of repeated high strains. This suite is considered to represent a sialic basement on which metavolcanic and metasedimentary rocks, now preserved as scattered greenstone remnants, accumulated. Direct evidence to confirm this temporal relationship is lacking, but structural data from the Dwalile, Assegaai and Commondale areas indicate that (1) the bimodal gneisses experienced a complex structural history prior to the first recognizable deformation in the supracrustal rocks (i.e., D1 in the supracrustals is equivalent to Dn + 1 in the gneisses) and (2) scattered remnants of the Dwalile rocks infolded with the bimodal suite structurally overlie the gneisses and are preserved in synformal keels. Significant proportions of metaquartzites and metapelites are present in the Assegaai greenstone sequence, the presence of which implies the existence of felsic crust in the source area from which these sediments were derived, a conclusion that is consistent with the structural data.

Hunter, D. R.↗

The Wisconsin magmatic terrane: An Early Proterozoic greenstone-granite terrane formed by plate tectonic processes

The Wisconsin magmatic terrane (WMT) is an east trending belt of dominantly volcanic-plutonic complexes of Early Proterozoic age (approx. 1850 m.y.) that lies to the south of the Archean rocks and Early Proterozoic epicratonic sequence (Marquette Range Supergroup) in Michigan. It is separated from the epicratonic Marquette Range Supergroup by the high-angle Niagara fault, is bounded on the south, in central Wisconsin, by Archean gneisses, is truncated on the west by rocks of the Midcontinent rift system, and is intruded on the east by the post-orogenic Wolf river batholith. The overall lithologic, geochemical, metallogenic, metamorphic, and deformational characteristics of the WMT are similar to those observed in recent volcanic arc terranes formed at sites of plate convergence. It is concluded that the WMT represents an evolved oceanic island-arc terrane accreated to the Superior craton in the Early Proterozoic. This conclusion is strengthened by the apparent absence of Archean basement from most of the WMT, and the recent recognition of the passive margin character of the epicratonic Marquette Range Supergroup.

Schulz, K. J.↗

A simple tectonic model for crustal accretion in the Slave Province: A 2.7-2.5 Ga granite greenstone terrane

A prograding (direction unspecified) trench-arc system is favored as a simple yet comprehensive model for crustal generation in a 250,000 sq km granite-greenstone terrain. The model accounts for the evolutionary sequence of volcanism, sedimentation, deformation, metamorphism and plutonism, observed througout the Slave province. Both unconformable (trench inner slope) and subconformable (trench outer slope) relations between the volcanics and overlying turbidities; and the existence of relatively minor amounts of pre-greenstone basement (microcontinents) and syn-greenstone plutons (accreted arc roots) are explained. Predictions include: a varaiable gap between greenstone volcanism and trench turbidite sedimentation (accompanied by minor volcanism) and systematic regional variations in age span of volcanism and plutonism. Implications of the model will be illustrated with reference to a 1:1 million scale geological map of the Slave Province (and its bounding 1.0 Ga orogens).

Hoffman, P. F.↗

Extensional tectonics and collapse structures in the Suez Rift (Egypt)

The Suez Rift is a 300 km long and 50 to 80 km wide basin which cuts a granitic and metamorphic shield of Precambrian age, covered by sediments of Paleozoic to Paleogene age. The rift structure is dominated by tilted blocks bounded by NW-SE normal faults. The reconstruction of the paleostresses indicates a N 050 extension during the whole stage of rifting. Rifting began 24 My ago with dikes intrusions; main faulting and subsidence occurred during Early Miocene producing a 80 km wide basin (Clysmic Gulf). During Pliocene and Quaternary times, faulting is still active but subsidence is restricted to a narrower area (Present Gulf). On the Eastern margin of the gulf, two sets of fault trends are predominant: (1) N 140 to 150 E faults parallel to the gulf trend with pure dip-slip displacement; and (2) cross faults, oriented NOO to N 30 E that have a strike-slip component consistent with the N 050 E distensive stress regime. The mean dip cross fault is steeper (70 to 80 deg) than the dip of the faults parallel to the Gulf (30 to 70 deg). These two sets of fault define diamond shaped tilted block. The difference of mechanical behavior between the basement rocks and the overlying sedimentary cover caused structural disharmony and distinct fault geometries.

Chenet, P. Y.↗

Lithospheric strength of Ganymede: Clues to early thermal profiles from extensional tectonic features

While it is generally agreed that the strength of a planet's lithosphere is controlled by a combination of brittle sliding and ductile flow laws, predicting the geometry and initial characteristics of faults due to failure from stresses imposed on the lithospheric strength envelope has not been thoroughly explored. Researchers used lithospheric strength envelopes to analyze the extensional features found on Ganymede. This application provides a quantitative means of estimating early thermal profiles on Ganymede, thereby constraining its early thermal evolution.

Golombek, M. P.↗

The evolution of rifting process in the tectonic history of the Earth

The continental rifting is the response of the lithosphere to the oriented tension. The distribution of viscosity in the lithosphere plays an essential role during all stages of the rifting. The viscosity is a function of the temperature, the lithostatic pressure, the rock composition, the deformation rate and other factors. The temperature is the most important factor. The vertical section of continental lithosphere of the rift zone may be divided into the following layers: the upper crust, in which brittle deformation prevails; the medialcrust, in which the role of plastic deformation increases; the lower crust, in which plastic deformation prevails; and the uppermost plastic part of the mantle overlapping asthenosphere. The depth of the boundaries in the crust layers are mainly controlled by the temperature.

Milanovsky, E. E.↗