Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “tectonics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28

Late Cenozoic alkaline volcanism in the northwestern Caribbean - Tectonic setting and Sr isotopic characteristics

The northwestern corner of the Caribbean plate has at least sixteen centers of alkalic volcanism, most of which is Quaternary in age. Sr-87/Sr-86 ratios of the rocks in these centers are used to distinguish three geographical groups: a low-ratio group (0.7026-0.7031) at the Nicaraguan Rise, an intermediate-ratio group (0.7036-0.7038) in northeastern Costa Rica, and a high-ratio group (0.7047-0.7063) in Hispaniola. It is suggested that the increased radiogenic strontium in both Costa Rica and Hispaniola may have come from volatile-rich fluids escaping from adjacent subducting slabs of oceanic crust. The isotopic differences between the two areas is explained by the relative longevity and high rate of subduction in Costa Rica compared to that in Hispaniola. The Costa Rican alkaline rocks cover a segment of the Cocos plate which is being subducted at a smaller angle (about 35 deg) than at the rest of the Central American arc.

Wadge, G.↗

Schiaparelli Basin, Mars - Morphology, Tectonics and infilling history

Schiaparelli Basin (an elliptical basin 460 x 400 km in diameter) is the best preserved large impact structure on Mars. Multiple periods of basin infilling by lava and eolian material can be recognized. Numerous ridges within the basin show a strong northwest-southeast orientation, consistent with a regional stress field induced by the loading of the lithosphere by Tharsis. Ridge location is, however, apparently dominated by a buried peak ring. Earth-based radar measurements of Schiaparelli indicate that the ejecta deposits are best preserved on topographic highs southeast of the basin, while eolian materials have preferentially accumulated in the lower (western) side of the basin. Lyot (215 km diameter) is believed to be a good analogue to the pre-infilled Schiaparelli, and indicates that Schiaparelli probably had an initially hummocky floor topography and both ballistic and ground-flow ejecta deposits.

Mouginis-Mark, P. J.↗

Seismicity and active tectonics of the Andes and the origin of the Altiplano

Large earthquakes and active deformation on the Andes were studied. Earthquakes on the east side of the Andes were generally found to reflect east-west crustal shortening. These earthquakes seem to occur throughout the crust and do not reflect a detachment and low angle thrusting of the sedimentary cover onto the Brazilian shield. Instead they imply deformation of the basement. The rate of shortening is compatible with construction of the Andes by crustal shortening since the late Cretaceous, and the surface geology, at least qualitatively, is considered to reflect this process. Andean margins are considered to be a result of crustal shortening. The crustal shortening in the sub-Andes occurs concurrently with normal faulting at high elevations in parts of the Andes. The normal faulting is associated with the buoyancy of the thick crust. Crustal shortening thickens the crust and work is done against gravity. When the crustal thickness and elevation reach limiting values, the range grows laterally by further thrusting on the margins.

Molnar, P.↗

Investigating tectonic and bathymetric features of the Indian Ocean using MAGSAT magnetic anomaly data

An equivalent source anomaly map and a map of the relative magnetization for the investigation region were produced. Gravimetry, bathymetry, and MAGSAT anomaly maps were contoured in pseudocolor displays. Finally, an autoregressive spectrum estimation technique was verified with synthetic data and shown to be capable of resolving exponential power spectra using small samples of data. Interpretations were made regarding the relationship between MAGSAT data spectra and crustal anomaly spectra.

Sailor, R. V.↗

Mechanisms for lithospheric heat transport on Venus Implications for tectonic style and volcanism

The mechanisms of plate recycling, lithospheric conduction, and hot spot volcanism are each evaluated to determine which is the dominant mode of lithospheric heat transfer on Venus, with attention given to the implications of each mechanism for the interpretation of Venus surface features. It is thought that plate recycling on Venus cannot be excluded on the basis of either theoretical arguments or present observations on topography and radar backscatter. Landforms caused by plate convergence and divergence on Venus, it is noted, would differ substantially from those on the earth owing to the high surface temperature and the absence of oceans on Venus, the lack of free or hydrated water in subducted material, the possibility that subduction would more commonly be accompanied by lithospheric delamination, and the rapid spreading rates that would be required if plate recycling removed a significant fraction of the internal heat. The possibility that the dominant mechanism early in the history of the planet was different from the one at work now is thought to merit consideration.

Solomon, S. C.↗

Thick shell tectonics on one-plate planets - Applications to Mars

Using the zero frequency equations of a self-gravitating elastic spherical shell overlying a strengthless fluid, a theory for stress distribution in thick lithospheric shells on one-plate planets is developed. For both the compensated and flexural modes, stress distributions in lithospheres are reviewed. For compensated modes, surface stresses depend only on surface topography, whereas for flexural modes it is shown that, for long wavelengths, stress trajectories are mainly dependent on the lithospheric lateral density distribution and not on elastic properties. Computational analyses are performed for Mars, and it is found that isostatically compensated models correctly predict the graben structure in the immediate Tharsis region and a flexural loading model is satisfactory in explaining the graben in the regions surrounding Tharsis. A three-stage model for the evolution of Tharsis is hypothesized: isostasy with north-south graben formation on Tharsis, followed by flexural loading and radial graben formation on the perimeter of Tharsis, followed by a last stage of loading with little or no regional deformation.

Banerdt, W. B.↗

The evolution of tectonic features on Ganymede

The bands of bright resurfaced terrain on Ganymede are probably broad grabens formed by global expansion and filled with deposits of ice. Grooves within the bands are thought to be extensional features formed during the same episode of expansion. The crust of Ganymede is modeled as a viscoelastic material subjected to extensional strain. With sufficiently high strain rates and stresses, deep normal faulting will occur, creating broad grabens that may then be filled. Continuing deformation at high strain rates and stresses will cause propagation of deep faults up into the flood deposits and normal faulting at the surface, while lower strain rates and stresses will cause formation of open extension fractures or, if the crustal strength is very low, grabens at the surface. The spacing between adjacent fractures may reflect the geothermal gradient at the time of deformation. Surface topography resulting from fracturing and normal faulting will decay with time as a result of viscous relaxation and mass-wasting.

Squyres, S. W.↗

Tectonic deformation of the Andes and the configuration of the subducted slab in central Peru: Results from a micro-seismic experiment

The vast majority of the microearthquakes recorded occurred to the east: on the Huaytapallana fault in the Eastern Cordillera or in the western margin of the sub-Andes. The sub-Andes appear to be the physiographic province subjected to the most intense seismic deformation. Focal depths for the crustal events here are as deep as 50 km, and the fault plane solutions, show thrust faulting on steep planes oriented roughly north-south. The Huaytapallana fault in the Cordillera Oriental also shows relatively high seismicity along a northeast-southwest trend that agrees with the fault scarp and the east dipping nodal plane of two large earthquakes that occurred on this fault in 1969. The recorded microearthquakes of intermediate depth show a flat seismic zone about 25 km thick at a depth of about 100 km. This agrees with the suggestion that beneath Peru the slab first dips at an angle of 30 deg to a depth of 100 km and then flattens following a quasi-horizontal trajectory. Fault plane solutions of intermediate depth microearthquakes have horizontal T axes oriented east-west.

Suarez, G.↗

Relationships and tectonics of the Jg-7 quadrangle of Ganymede

Craters within the Ganymede Jg-7 quadrangle were divided into seven mappable units. The units represent: (1) irregular or elongate craters, (2) craters with dark ejecta, (3) palimpsests, (4) secondary craters, (5) and craters of young, mature, and old age. Symbols used for crater floors include: (1) flat floors, (2) floors with pits, (3) floora with a central dome or peak, (4) and floors with a central dome and pit. Grooved terrains were divided into five mappable units. Three units of light grooved material represent small, medium, and large grooves, which are arbitrarily divided. The other two units of grooved terrain represent dark grooved materials, and reticulate grooves. Two units of ungrooved dark terrain and two units of ungrooved light terrain were defined. In Galileo Regio, two units were defined repesenting large furrowed grooves, and smaller grooves which are orthogonal to the furrowed grooves.

Glotfelty, M. F.↗

The crustal tectonics and history of Europa: A structural, morphological, and comparative analysis

An evaluation of surface features and structures on the Galilean moon Europa is made using the available high resolution Voyager imagery, low resolution support imaging, and what understanding of ice structure and mechanical behavior science has that is applicable to the problem. A general discussion of the history of Europa studies and the fundamental global morphology is undertaken. The visible lineament and terrain patterns are described, and possible origins discussed. Observations of faulting and block rotation previously described are amplified. A comparison of Europa's structures to terrestrial sea ice and lava lake crust features is also included. Finally, an attempt is made at synthesizing a unified model for the evolution of Europa's crust is presented which is compared with models developed by others.

Schenk, P. M.↗

Seismicity, fault plane solutions, depth of faulting, and active tectonics of the Andes of Peru, Ecuador, and southern Colombia

The long-period P waveforms observed for 17 earthquakes in the Peruvian Andes during 1963-1976 are compared with synthetic waveforms to obtain fault-plane solutions and focal depths. The morphological units of the Peruvian Andes are characterized: coastal plains, Cordillera Occidental, altiplano and central high plateau, Cordillera Oriental, and sub-Andes. The data base and analysis methodology are discussed, and the results are presented in tables, diagrams, graphs, maps, and photographs illustrating typical formations. Most of the earthquakes are shown to occur in the transition zone from the sub-Andes to the Cordillera Oriental under formations of about 1 km elevation at focal depths of 10-38 km. It is suggested that the sub-Andean earthquakes reflect hinterland deformation of a detached fold and thrust belt, perhaps like that which occurred in parts of the Canadian Rockies. From the total crustal shortening evident in Andean morphology and the shortening rate of the recent earthquakes it is estimated that the topography and crustal root of the Andes have been formed during the last 90-135 Myr.

Suarez, G.↗

Neogene Caribbean plate rotation and associated Central American tectonic evolution

A theoretical model of the opening of the Cayman Trough is developed on the basis of geological evidence from a wide area. It is proposed that strike slip motion began about 30 Myr ago and proceeded at a rate of 37 + or - 6 mm/yr for a total of 1100 km of relative plate displacement, and that Central America Underwent an anticlockwise rotation with internal plate deformation. Maps of the reconstructed motion are provided.

Wadge, G.↗

Tectonic implications of the microearthquake seismicity and fault plane solutions in southern Peru

Because the contortion in the seismic zone in southern Peru is aligned approximately parallel to the direction of relative plate motion, rather than perpendicular to the coast of Peru, the position of the contortion need not migrate with respect to the overriding South American plate as the Nazca plate subducts beneath it, and the flow in the surrounding asthenosphere could be in a steady state. In addition, the position of the contortion defines the northern boundary of the volcanic arc in southern Peru. The inference that a wedge of asthenospheric material must overlie the downgoing slab for subduction-related volcanism to occur is thereby strengthened.

Grange, F.↗