Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “surface morphologies”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

High-performance organic photodetectors enabled by a refined fibrillar multiphase morphology

Film morphology of donor:acceptor blend layers plays a critical role in photon-to-current efficiency and dark/noise current of organic photodetectors (OPDs). One effective approach to manipulate crystallization and mesoscale phase separation of such blend layers is sequential casting (SC). However, the guiding strategies to control the morphology and the impacts on OPD performance of the SC films remain elusive, as the film structural evolution during SC is different from conventional blend casting (BC). In this report a refined fibrillar multiphase morphology is demonstrated by SC in an NT812:IEICO-4F blend film, where the high-quality IEICO-4F crystallites infiltrate the robust NT812 fibril network from the surface to the bulk. Such a morphology leads to improved charge generation and collection, reduced trap states, and enhanced charge block capability of resultant device, enabling simultaneous achievement of high external quantum efficiency and low dark/noise current. A maximum special detectivity of 5 × 10 13 Jones is achieved at 860 nm under –0.1 V, which is among the highest detectivities for vis-to-NIR OPDs. The linear dynamic range and response speed are also improved. Such enhancements are parallelly observed from OPD devices based on other blend systems with similar fibrillar refinement, which provides guidelines for film structure manipulation towards high OPD performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Street-level temperature estimation using graph neural networks: Performance, feature embedding and interpretability

Estimating street-level air temperature is a challenging task due to the highly heterogeneous urban surfaces, canyon-like street morphology, and the diverse physical processes in the built environment. Though pioneering studies have embarked on investigations via data-driven approaches, many questions remain to be answered. Here, in this study, we leveraged an innovative framework and redefined the street-level temperature estimation problem using Graph Neural Networks (GNN) with spatial embedding techniques. The results showed that GNN models are more capable and consistent of estimating street-level temperature among tested locations, benefiting from its unique strength in handling extensive data over unstructured graph topology. In addition, we conducted in-depth analysis of feature importance to enhance the model interpretability. Among the urban features analyzed in this study, the time-variant canopy density and meter-level land use data emerge as crucial factors. Our findings highlight GNN 's high potential in capturing the complex dynamics between urban elements and their impacts on microclimate, thus offering valuable insights for comprehensive urban data collection and urban climate modeling in general. Collectively, this study also contributes to urban planning and policy by providing avenues to enhance city resilience against climate change, thereby advancing the agenda for environmental stewardship and urban sustainability.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Tunable Growth of Layered Double Hydroxide Nanosheets through Hydrothermal Conversion of Atomic Layer Deposition Seed Layers

To enable the design and manufacturing of hierarchical nanomaterial architectures, there is a need for synthesis and processing methods that can enable tunable geometric control at the nanoscale while maintaining conformality on complex 3-D templates. Here, in this study, we explore the programmable control of vertically oriented Zn-Al layered double hydroxide (LDH) nanosheet arrays using atomic layer deposition (ALD) to deposit a seed layer of Al 2 O 3 , which is subsequently consumed and converted into the LDH phase under hydrothermal growth conditions. We demonstrate tunable control over the spacing and length of the nanosheets by varying the thickness of the initial ALD seed layer with subnanometer precision. This can be viewed as a nanoscale titration reaction, where Al acts as the limiting reagent during the hydrothermal synthesis of the nanosheets. Elemental mapping demonstrates the dynamic evolution of the resulting morphology, which is driven by surface diffusion and nucleation processes. The conformal nature of ALD allows for hierarchical growth of nanosheets on the surface of a variety of nonplanar substrate geometries, including microposts, paper fibers, and porous ceramic supports. This illustrates the power of ALD to enable bottom-up growth of 3-D nanoarchitectures with tunable geometries by controlling nucleation and growth in subsequent solution reactions.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Investigation of local distortion effects on X-ray absorption of ferroelectric perovskites from first principles simulations

Understanding the role of ferroelectric polarization in modulating the electronic and structural properties of crystals is critical for advancing these materials for overcoming various technological and scientific challenges. However, due to difficulties in performing experimental methods with the required resolution, or in interpreting the results of methods therein, the nanoscale morphology and response of these surfaces to external electric fields has not been properly elaborated. Here, in this work, we investigate the effect of ferroelectric polarization and local distortions in a BaTiO 3 perovskite, using two widely used computational approaches which treat the many-body nature of X-ray excitations using different philosophies, namely the many-body, delta-self-consistent-field determinant (mb-ΔSCF) and the Bethe–Salpeter equation (BSE) approaches. We show that in agreement with our experiments, both approaches consistently predict higher excitations of the main peak in the O–K edge for the surface with upward polarization. However, the mb-ΔSCF approach mostly fails to capture the L 2,3 separations at the Ti–L edge, due to the absence of spin–orbit coupling in Kohn–Sham density functional theory (KS-DFT) at the generalized gradient approximation level. On the other hand, and most promising, we show that application of the GW/BSE approach successfully reproduces the experimental XAS, both the relative peak intensities as well as the L 2,3 separations at the Ti–L edges upon ferroelectric switching. Thus simulated XAS is shown to be a powerful method for capturing the nanoscale structure of complex materials, and we underscore the need for many-body perturbation approaches, with explicit consideration of core-hole and multiplet effects, for capturing the essential physics in these systems.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2020

Morphology and chemical behavior of model CsO x /Cu 2 O/Cu(111) nanocatalysts for methanol synthesis: Reaction with CO 2 and H 2

Cs is a promoter of Cu-based catalysts for the synthesis of alcohols from CO 2 hydrogenation. Scanning tunneling microscopy and ambient-pressure x-ray photoelectron spectroscopy were used to study the morphology and chemical properties of surfaces generated by the deposition of cesium on Cu 2 O/Cu(111) and Cu(111) substrates. CsO x nanostructures were formed after Cs metal was deposited on Cu 2 O/Cu(111) at 300 K. The formed CsO x protrude over the surface of copper oxide by 2–4 Å, with the dimension at the base of the nanostructures being in the range of 1–3 nm. Heating to elevated temperature induced significant changes in the size and dispersion of the CsO x nanostructures, and there was a clear reconstruction of the copper oxide substrate, which then exhibited long range order with a hexagonally packed structure. The as-deposited and annealed surfaces of CsO x /Cu 2 O/Cu(111) were more reactive toward CO 2 than plain Cu 2 O/Cu(111) or clean Cu(111). Yet, none of them were stable in the presence of H 2 , which fully reduced the copper oxide at 400–450 K. In CsO x /Cu(111), the CsO x nanoclusters were dispersed all over the metallic copper in no particular order. The CsO x species had an average width of 2 nm and ~1 Å height. The CsO x /Cu(111) systems exhibited the highest activity for the binding and dissociation of CO 2 , indicating that the CsO x -copper interface plays a key role in alcohol synthesis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Structured illumination for surface-resolved grazing-incidence X-ray scattering

Grazing-incidence (GI) scattering techniques are widely used to characterize thin films, offering high surface sensitivity and insight into morphology and structure. However, these approaches typically provide statistical averaged information due to elongated footprint or limited spatial resolution due to beam size. Here we introduce a method that combines structured illumination with GI X-ray scattering and leverages our computational imaging approach to resolve local structural details. We demonstrate that our method captures local features of an organic semiconductor thin film without the need for sample rotation as in tomography. The method expands GI techniques from statistical averaging to high-resolution imaging, thereby providing the capability for detailed analysis of local material properties, such as domain shape, orientation and polymorphism, which are critical for advancing material design towards more efficient and tailored materials.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2023

Understanding the Effect of Electrochemical Properties and Microstructure on the Microgalvanic Corrosion of Mg Alloys via Phase-Field Simulations

In this work, we apply a phase-field model to gain insights into the corrosion behavior of Mg alloys. Specifically, we study the effect of electrochemical properties of the materials and their environment and the spatial distribution of second phases in a magnesium alloy. To this end, we perform sensitivity analyses in which we separately vary the exchange current density and corrosion potential of the second phase, as well as the electrolyte conductivity. We describe the effects of these parameters on the corrosion current and the resulting corrosion-front morphology. We also confirm that the ratio between the Wagner length, calculated for the anodic phase, and the initial width of the anodic domain is a good predictor of the morphological characteristic of the corroding surface. In addition, we examine the effect of the microstructure on the corrosion behavior in both 2D and 3D systems by varying the shape, size, and distribution of the second-phase regions. Our findings provide insights into the influence of the two-phase microstructure on the corrosion behavior in a magnesium alloy.

Electrochemistry↗
DOE OSTI2022

On the Nature of Surface Defects Found in 2/0 N-Doped 9-Cell Cavities

In this contribution, we present a systematic study on the microstructure of 1.3 GHz 9-cell TESLA type SRF cavity, processed with 2/0 Nitrogen-doping surface treatment, to explain the premature quench phenomena commonly observed in N-doping treated cavities. The microstructure characterization was carried out using Secondary electron images, advanced metallurgical techniques such as EBSD in parallel with chemical information obtained from spectroscopic techniques. The most remarkable difference is observed in the ends-cavities (1 and 9), which showed roughening of the surface, revealing a series of morphologies associated with Nb cubic phase. The cell-to-cell analysis also showed standard features such as pits with different geometry and distribution, located in grains and grain boundaries. The defects found in this system suggest that the standard electropolishing chemical etching was insufficient to eliminate history defects produced during the manufacture of the cavity, without discarding the role of the impurities, N and O, that could have induced the growth of these morphologies.

43 PARTICLE ACCELERATORS↗
DOE OSTI2023

Use of Nucleating Agent NA11 in the Preparation of Polyvinylidene Fluoride Dual-Layer Hollow Fiber Membranes

Polyvinylidene fluoride (PVDF) dual-layer hollow fiber membranes were simultaneously fabricated by thermally induced phase separation (TIPS) and non-solvent induced phase separation (NIPS) methods using a triple orifice spinneret (TOS) for water treatment application. The support layer was prepared from a TIPS dope solution, which was composed of PVDF, gamma-butyrolactone (GBL), and N-methyl-2-pyrrolidone (NMP). The coating layer was prepared from a NIPS dope solution, which was composed of PVDF, N,N-dimethylacetamide (DMAc), and polyvinylpyrrolidone (PVP). In order to improve the mechanical strength of the dual-layer hollow fiber, a nucleating agent, sodium 2,2'-methylene bis-(4,6-di-tert-butylphenyl) phosphate (NA11), was added to the TIPS dope solution. The performance of the membrane was evaluated by surface and cross-sectional morphology, water flux, mechanical strength, and thermal property. Our results demonstrate that NA11 improved the mechanical strength of the PVDF dual-layer hollow fiber membranes by up to 42%. In addition, the thickness of the coating layer affected the porosity of the membrane and mechanical performance to have high durability in enduring harsh processing conditions.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Materials for controlling the epitaxial growth of photoactive layers in photovoltaic devices

There is disclosed ultrathin film material templating layers that force the morphology of subsequently grown electrically active thin films have been found to increase the performance of small molecule organic photovoltaic (OPV) cells. There is disclosed electron-transporting material, such as hexaazatriphenylene-hexacarbonitrile (HAT-CN) can be used as a templating material that forces donor materials, such as copper phthalocyanine (CuPc) to assume a vertical-standing morphology when deposited onto its surface on an electrode, such as an indium tin oxide (ITO) electrode. It has been shown that for a device with HAT-CN as the templating buffer layer, the fill factor and short circuit current of CuPc:C60 OPVs were both improved compared with cells lacking the HAT-CN template. This is explained by the reduction of the series resistance due to the improved crystallinity of CuPc grown onto the ITO surface.

Forrest, Stephen R.↗
DOE OSTI2025

Subdiffraction Imaging of Carrier Dynamics in Halide Perovskite Semiconductors: Effects of Passivation, Morphology, and Ion Motion

In this article, we spatially resolve photocarrier dynamics in halide perovskites using time-resolved electrostatic force microscopy (trEFM) to map surface potential equilibration during photoexcitation. We present a unified interpretation of trEFM, which measures the evolution of the surface potential in response to photoexcitation. We show that trEFM measurements correlate with surface recombination velocity and carrier lifetimes, validated with time-resolved photoluminescence imaging. We further validate the interpretation of trEFM through wavelength- and intensity-dependent measurements and with drift-diffusion simulations. We compare several passivation agents, including (3-aminopropyl)trimethoxysilane (APTMS), [3-(2-aminoethylamino)propyl]trimethoxysilane (AEAPTMS), and phenethylammonium iodide (PEAI). The results reveal heterogeneity in surface potential equilibration times that correlates with perovskite film morphology and nanoscale variations in recombination dynamics following surface passivation. Not only do our results highlight the potential for further improvement of passivation strategies, but also the necessity of high spatial and temporal resolution methods, like trEFM, to evaluate next-generation semiconductors.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Inferring Structural Parameters of Low-Surface-Brightness-Galaxies with Uncertainty Quantification using Bayesian Neural Networks

Measuring the structural parameters (size, total brightness, light concentration, etc.) of galaxies is a significant first step towards a quantitative description of different galaxy populations. In this work, we demonstrate that a Bayesian Neural Network (BNN) can be used for the inference, with uncertainty quantification, of such morphological parameters from simulated low-surface-brightness galaxy images. Compared to traditional profile-fitting methods, we show that the uncertainties obtained using BNNs are comparable in magnitude, well-calibrated, and the point estimates of the parameters are closer to the true values. Our method is also significantly faster, which is very important with the advent of the era of large galaxy surveys and big data in astrophysics.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2025

Carboxylic acid induced restructuring of the Fe 3 O 4 (001) surface

The redox properties of Fe 3 O 4 surfaces are central to many catalytic processes and enable dynamic, reduction-induced morphological restructuring during reactions. Here, we investigate the structural changes of the Fe 3 O 4 (001) surface during the decomposition of formic and acetic acids using scanning tunneling microscopy, X-ray photoelectron spectroscopy, and density functional theory (DFT) calculations. Both acids readily deprotonate, forming ordered carboxylate overlayers on the surface. Product formation pathways involve the removal of lattice oxygen, resulting in extensive surface restructuring. For formic acid, only a modest level of surface oxygen removal (∼3%) is observed, resulting in elongated pits along the octahedral Fe rows and exhibiting an aspect ratio of ∼3. In contrast, acetic acid induces more extensive reduction, with the removal of ∼20% of surface oxygen, yielding significantly larger pits while maintaining a similar aspect ratio. Repeated exposure to acetic acid further enlarges the pits, indicating preferential etching at step edges. DFT calculations reveal a mechanistic sequence in which lattice oxygen removal destabilizes adjacent Fe atoms, promoting their migration into the bulk and subsequent pit propagation and step edge formation. Together, these findings provide atomistic insights into the coupling between carboxylic acid conversion and oxide surface restructuring, underscoring the strong interplay between redox chemistry and morphological changes on catalytically active Fe 3 O 4 surfaces.

Ortiz-Garcia, José J. [Pacific Northwest National ↗
DOE OSTI2026

Reducing Non-Radiative Recombination in Perovskite Solar Cells with a SiO2-Graphene Oxide Buried Interface Layer

Perovskite solar cells (PSCs) have emerged as a transformative photovoltaic technology. However, the device performance of inverted PSCs is dramatically limited by surface defects and the underlying film morphology of metal halide perovskite (MHP) thin film. Herein, we report a novel buried interface layer consisting of SiO2 nanoparticles (NPs) chemically bonded to graphene oxide (GO), deposited atop a hydrophobic hole extraction layer (HEL) to address this limitation. The SiO2 NPs serve as insoluble scaffolds that immobilize GO sheets on the hydrophobic HEL surface, enabling the formation of homogeneous MHP thin films. Meanwhile, the GO functional groups interact with surface-uncoordinated Pb2+, suppressing interfacial defects and guiding crystal grain growth of the resultant MHP thin films. This synergistic effect suppresses non-radiative charge recombination and enhances charge extraction efficiency. As a result, a 26.07% efficiency with significantly suppressed photocurrent hysteresis is observed from PSCs incorporating the SiO2-GO buried interface layer. Moreover, the above PSCs maintain 92% of their initial PCE after 1800 h of continuous operation at the maximum power point under AM 1.5 G (100 mW/cm2) illumination at 25 degrees C in air with 50-60% relative humidity. These results demonstrate that we have developed a facile and effective way to realize high-performance inverted PSCs.

14 SOLAR ENERGY↗
DOE OSTI2020

Bulk vs Intrinsic Activity of NiFeO x Electrocatalysts in the Oxygen Evolution Reaction: The Influence of Catalyst Loading, Morphology, and Support Material

We used a combination of ultrahigh vacuum surface science techniques, X-ray spectroscopy, electrochemistry, and density functional theory (DFT), to characterize the influence of catalyst morphology, loading/coverage, and substrate material on the bulk (all atoms) and intrinsic (electrochemically accessible atoms) activity of NiFeO x electrocatalysts in the oxygen evolution reaction (OER). NiFeO x catalysts were grown on both Au(111) and highly oriented pyrolytic graphite (HOPG) electrodes. DFT predicted Fe edge-site atoms at the NiFeO x /Au(111) interface to be the most thermodynamically favorable reaction center, and X-ray absorption spectroscopy data indicated small NiFeO x catalyst particles on Au(111) contained a high population of OER active Fe edge-site atoms. However, restructuring of the Au(111) surface due to repeated oxidation and reduction cycles of the OER CV measurements encapsulated small NiFeO x nanoparticles at catalyst loadings below ~1.5 nmol metal /cm 2 , passivated catalyst edges and reduced bulk OER activity of Au-supported NiFeO x compared with HOPG-supported ones. Analysis of intrinsic activity revealed that the Au(111) support strongly benefited electrochemically accessible NiFeO x atoms, and we observed a 2–3 fold activity enhancement compared with HOPG-supported catalysts for loadings above ~1 nmol metal /cm 2 . Overall, evaluating bulk vs intrinsic activity and identifying loading/coverage-dependent support effects is important for accurately probing fundamental interfacial chemistry, choosing suitable catalyst loadings and supports, and optimizing system parameters to maximize the performance of electrocatalyst systems.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Sapphire advanced mitigation process: wet etch to expose sub-surface damage and increase laser damage resistance and mechanical strength

In this study, a novel, to the best of our knowledge, method of wet chemical etching of sapphire workpieces (such as optics, wafers, windows, and cones), called the sapphire advanced mitigation process (or sapphire AMP), has been developed that exposes sub-surface mechanical damage created during the optical fabrication process and significantly enhances the surface laser damage resistance (> 2×) and mechanical strength (up to ~ 2.6×). Sapphire AMP involves first treating the workpiece with a mixture of sulfuric and phosphoric acid ([H 2 SO 4 ]:[H 3 PO 4 ]= 1 : 3) at 220°C, followed with phosphoric acid at 160°C, then with sodium hydroxide base (NaOH) and surfactant at 40°C, and finally with a high-pressure deionized water spray rinse. Sapphire AMP has been demonstrated on both A- and C-plane sapphire workpieces. The mechanism of this etch process involves the reaction of the sapphire (Al 2 O 3 ) surface with sulfuric acid (H 2 SO 4 ) forming aluminum sulfate [Al2(SO4)3], which has low solubility. The high phosphoric acid content in the first and second steps of sapphire AMP results in the efficient conversion of Al 2 (SO 4 ) 3 to aluminum phosphate (AlPO 4 ), which is very soluble, greatly reducing reaction product redeposition on the workpiece surface. Sapphire AMP is shown to expose sub-surface mechanical damage on the sapphire surface created during the grinding and polishing processes, whose etched morphology has either isotropic or anisotropic evolution depending on the nature of the initial surface damage. Sapphire AMP was also designed to remove the key known surface, laser absorbing precursors (namely, foreign chemical impurities, the fracture surface layer of preexisting sub-surface damage, and reaction product or foreign species redeposition or precipitation). Static and sliding indention induced surface microfractures on sapphire are shown after sapphire AMP to have a significant decrease in the fast photoluminescence intensity (a known metric for measuring the degree of laser damaging absorbing precursors). In addition, the onset of laser damage (at 351 nm 3 ns) on sapphire AMP treated workpieces was shown to increase in fluence from ~ 4 to >9.5J/cm 2 . Finally, biaxial ball-on-ring mechanical tests on sapphire disks showed an increase in the failure stress from 340 MPa (with pre-existing 28 µm flaws) to ~ 900MPa after sapphire AMP, which is attributed to the blunting of the surface microfractures.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Aerosol Optical Tweezers Elucidate the Chemistry, Acidity, Phase Separations, and Morphology of Atmospheric Microdroplets

Aerosol particles represent unique chemical environments because of their high surface area-to-volume ratio that promotes the effects of interfacial chemistry in confined environments. Properties such as viscosity, diffusivity, water content, pH, and morphology—following liquid–liquid phase separation—can strongly alter how a particle interacts with condensable vapors and reactive trace gases, thus modifying its continual evolution and environmental effects. Our understanding of this chemical evolution of atmospheric particulate matter and its environmental impacts is largely limited by our ability to directly observe how these critical particle properties respond to the addition or reactive uptake of new chemical components. Aerosol optical tweezers (AOT) stably trap particles in focused laser beams, providing positional control and the retrieval of many of these critical properties required to understand and predict the chemistry of aerosolized microdroplets. The analytical power of the AOT stems from the retrieval of the cavity-enhanced Raman spectrum induced by the trapping laser. Analysis of the whispering gallery modes (WGMs) that resonate as a standing wave around the droplet’s interface, provide high accuracy measurements of the droplet’s size, refractive index (and thus a measurement of composition), and can distinguish between core–shell, partially engulfed, and homogeneous morphologies. In this study, we have advanced the ability to determine the properties of the core and shell phases in biphasic droplets, including obtaining high-accuracy pH measurements. These capabilities were applied to perform AOT physical chemistry experiments on authentic secondary organic aerosol (SOA) produced directly in the AOT chamber by ozonolysis of terpene vapors. The propensity of the SOA to phase separate as a shell from a wide range of nonpolar to polar core phases was observed, along with the discovery of a stable emulsified state of SOA particles in an aqueous salt droplet. Micron-thick SOA shells did not impede the gain or loss of water or squalane from the core to the surrounding air, indicating no significant diffusional limitations to condensational growth or partitioning even under dry conditions. These experiments formed the foundation of a new framework that predicts how the phase-separated morphology of complex aerosols containing organic carbon evolves during continual atmospheric oxidation processes. Increases in oxidation state will quickly drive conversion from a partially engulfed to core–shell morphology that has dramatically different chemical reactivity since the core phase is completely concealed by the shell. The recent advances in the experimental capabilities of the AOT technique such as presented here enable novel experimental methodologies that provide insights into the chemistry and multidimensional properties of aerosol microdroplets, and how these coevolve and respond to continual chemical reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

In Situ Surface Reconstruction via Lithium Residue Regulation for Direct Recycling of Ni-Rich Cathodes

Surface stability is crucial for the long cycling performance of Ni-rich cathodes, as it dictates and governs side reactions, preserves crystal integrity, and mitigates capacity degradation during cycling. For spent Ni-rich cathodes targeted for one-step direct recycling, constructing a robust and stable surface is particularly challenging because prior cycling induces severe structural and morphological degradation. Here, in this study, we introduce an in situ surface reconstruction strategy that converts surface lithium residues into a protective layer via a direct liquid-phase coating with ammonium dihydrogen phosphate (ADP). During the process, residual lithium remaining after the hydrothermal relithiation is removed, while a conformal lithium phosphate (Li 3 PO 4 , LPO) layer is formed to act as both a chemical barrier and a structural stabilizer. This dual function enhances cycling stability and rate capability in regenerated cathodes, and the approach is applicable to various Ni-rich compositions including spent LiNi 0.6 Co 0.2 Mn 0.2 O 2 (NCM622) and scrap LiNi 0.866 Mn 0.066 Co 0.05 Al 0.018 O 2 (NCMA). Its scalability and compositional versatility make it a promising route for sustainable regeneration of high-performance cathode materials.

36 MATERIALS SCIENCE↗