Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “surface conditioning”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28
All sourcesNASA NTRSDOE OSTI
NASA NTRS1973

Radar measurement of soil moisture content

The effect of soil moisture on the radar backscattering coefficient was investigated by measuring the 4-8 GHz spectral response from two types of bare-soil fields: slightly rough and very rough, in terms of the wavelength. An FM-CW radar system was used to measure the return at 10 frequency points across the 4-8 GHz band, at different look angles, and for all polarization combinations. The results indicate that the radar response to soil moisture content is highly dependent on the surface roughness, microwave frequency, and look angle. The response seems to be linear over the range 15%-30% moisture content for all angles, frequencies, polarizations and surface conditions.

Ulaby, F. T.↗
NASA NTRS1975

Investigation of use of space data in watershed hydrology

The author has identified the following significant results. Digital data from the ERTS multispectral scanner were used to investigate the feasibility of identifying differences in watershed runoff capability with spaceborne sensors. Linear combinations of the two visible light bands and a combination of the four visible and near infrared bands were related to a coefficient used in the Soil Conservation Service storm runoff equation. Good relationships were found in two scenes, both with dry surface conditions, over the same watersheds. The relationships defined by both combinations of digital data were tested on a independent set of 10 watersheds and on an additional 22 subwatersheds. Coefficients predicted with the ERTS data proved better than coefficients developed with conventional methods.

Blanchard, B. J.↗
NASA NTRS1975

A radio picture of the earth

A technique called passive microwave remote sensing can be used to obtain a new view of the planet earth by means of radio telescopes carried aboard artificial satellites. An important relationship between the observed radio brightness temperature and the surface conditions provides the basis for the new technique. A radio image is presented of the entire earth on the basis of Nimbus microwave-image data taken January 12-16, 1973.

Webster, W. J., Jr.↗
NASA NTRS1975

Design considerations in the creation and maintenance of electrostatic cleanliness for solar electrically propelled spacecraft

Charge build-up on spacecraft surfaces and resulting zones of electrostatic contamination have been examined for electrically active and electrically passive spacecraft with both conducting and dielectric surface materials, illuminated and nonilluminated surface conditions, and for both inclusion and neglect of free charge effects from photocurrents and ambient space plasma particles. Techniques for measurement and reduction of electrostatic contamination zone extent have been developed for spacecraft with charge release capability. Indicated limitations for contamination cleanup are about 1 volt potential variation from spacecraft to ambient plasma. Bandwidths of electrostatic monitoring and clamping devices extend to several hundred kilohertz for both DC and 'broadband' AC electrostatic cleanliness.

Sellen, J. M., Jr.↗
NASA NTRS1975

Experimental system for drilling simulated lunar rock in ultrahigh vacuum

An experimental apparatus designed for studying drillability of hard volcanic rock in a simulated lunar vacuum of 5 x 10 to the minus 10th power torr is described. The engineering techniques used to provide suitable drilling torque inside the ultrahigh vacuum chamber while excluding all hydrocarbon are detailed. Totally unlubricated bearings and gears were used to better approximate the true lunar surface conditions within the ultrahigh vacuum system. The drilling system has a starting torque of 30 in-lb with an unloaded running torque of 4 in-lb. Nominal torque increase during drilling is 4.5 in-lb or a total drilling torque of 8.5 in-lb with a 100-lb load on the drill bit at 210 rpm. The research shows conclusively that it is possible to design operational equipment for moderate loads operating under UHV conditions without the use of sealed bearings or any need of lubricants whatsoever.

Roepke, W. W.↗
NASA NTRS1976

Prediction of rotating-blade vortex noise from noise of nonrotating blades

Measurements were conducted in an acoustic wind tunnel to determine vortex noise of nonrotating circular cylinders and NACA 0012 airfoils. Both constant-width and spanwise tapered models were tested at a low turbulence level. The constant-diameter cylinder and constant-chord airfoil also were tested in the turbulent wake generated by an upstream cylinder or airfoil. Vortex noise radiation from nonrotating circular cylinders at Reynolds numbers matching those of the rotating-blade tests were found to be strongly dependent on surface conditions and Reynolds number. Vortex noise of rotating circular cylinder blades, operating with and without the shed wake blown downstream, could be predicted using data for nonrotating circular cylinders as functions of Reynolds number. Vortex noise of nonrotating airfoils was found to be trailing-edge noise at a time frequence equal to that predicted for maximum-amplitude Tollmein-Schlichting instability waves at the trailing edge.

Fink, M. R.↗
NASA NTRS1975

Spherical means of solutions of partial differential equations in a conical region

The spherical means of the solutions of a linear partial differential equation Lu = f in a conical region are studied. The conical region is bounded by a surface generated by curvilinear xi lines and by two truncating xi surfaces. The spherical mean is the average of u over a constant xi surface. Conditions on the linear differential operator, L, and on the orthogonal coordinates xi, eta, and zeta are established so that the problem for the determination of the spherical mean of the solution subjected to the appropriate boundary and initial conditions can be reduced to a problem with only one space variable. Conditions are then established so that the spherical mean of the solution in one conical region will be proportional to that of a known solution in another conical region. Applications to various problems of mathematical physics and their physical interpretations are presented.

Ting, L.↗
NASA NTRS1975

Remote profiling of lake ice using an S-band short-pulse radar aboard an all-terrain vehicle

The airborne short-pulse radar system described was developed to measure ice thickness in an attempt to extend the winter navigation system as a means of reducing coal and ore shipping costs. Experimental studies of the accuracy and limitations of the system are discussed, and measurements made at 25 sites are compared. The radar system was found to provide accurate lake ice thickness measurements that were not affected by snow cover or adverse weather conditions. Surface melting and rain, however, preclude measurements.

Cooper, D. W.↗
NASA NTRS1976

Formation, structure, and orientation of gold silicide on gold surfaces

The formation of gold silicide on Au films evaporated onto Si(111) surfaces is studied by Auger electron spectroscopy (AES) and low-energy electron diffraction (LEED). Surface condition, film thickness, deposition temperature, annealing temperature, and heating rate during annealing are varied. Several oriented crystalline silicide layers are observed.

Green, A. K.↗
NASA NTRS1976

Atomic oxygen-metal surface studies as applied to mass spectrometer measurements of upper planetary atmospheres

The problem of atomic oxygen loss in mass spectrometer ion sources can be reduced to an understanding of the possible surface interactions between oxygen atoms and the metal surface of the ion source. Results are presented for an experimental study in which an atomic oxygen beam apparatus and a mass spectrometer were used to measure the oxygen atom reflection, recombination, general surface reaction, and occlusion probabilities on six different engineering surfaces as a function of atomic oxygen exposure. The materials studied are gold, Nichrome V, aluminum, titanium, silver, and platinum. The variation in measured reflection probability seems to occur with metals that form oxides, Nichrome V being stable in terms of reflection stability. Recombination is observed an all surfaces except aluminum and platinum. Variation in the complete set of measurements in a single experiment is the result of varying surface conditions.

Sjolander, G. W.↗
NASA NTRS1976

Surficial geology of Mars: A study in support of a penetrator mission to Mars

Physiographic and surficial cover information were combined into unified surficial geology maps (30 quadrangles and 1 synoptic map). The surface of Mars is heterogeneous and is modified by wind, water, volcanism, tectonism, mass wasting and other processes. Surficial mapping identifies areas modified by these processes on a regional basis. Viking I mission results indicate that, at least in the landing site area, the surficial mapping based on Mariner data is fairly accurate. This area was mapped as a lightly cratered plain with thin or discontinuous eolian sediment. Analysis of lander images indicates that this interpretation is very close to actual surface conditions. These initial results do not imply that all surficial units are mapped correctly, but they do increase confidence in estimates based on photogeologic interpretations of orbital pictures.

Spudis, P.↗
NASA NTRS1977

Two-dimensional hygrothermal diffusions into a finite width composite laminate

Two dimensional hygroscopic diffusion into composite laminates with free edges was obtained through the use of a second order finite difference scheme. A computer program was developed for the transient nonlinear coupled hygrothermal diffusion into finite width laminates with varying surface conditions along two edges. The formulation permits the diffusion coefficient to be a function of temperature, moisture concentration, and fiber orientation. The moisture distributions thus obtained are necessary for analysis of the moisture induced interlaminar stresses in the vicinity of free edges. It is shown that large diffusion times tend to eliminate the significance of stacking sequence, but gradients within and between layers are significant for all diffusion times.

Farley, G. L.↗
NASA NTRS1977

Effects of tropospheric and ionospheric refraction errors in the utilization of GEOS-C altimeter data

The effects of tropospheric and ionospheric refraction errors are analyzed for the GEOS-C altimeter project in terms of their resultant effects on C-band orbits and the altimeter measurement itself. Operational procedures using surface meteorological measurements at ground stations and monthly means for ocean surface conditions are assumed, with no corrections made for ionospheric effects. Effects on the orbit height due to tropospheric errors are approximately 15 cm for single pass short arcs (such as for calibration) and 10 cm for global orbits of one revolution. Orbit height errors due to neglect of the ionosphere have an amplitude of approximately 40 cm when the orbits are determined from C-band range data with predominantly daylight tracking. Altimeter measurement errors are approximately 10 cm due to residual tropospheric refraction correction errors. Ionospheric effects on the altimeter range measurement are also on the order of 10 cm during the GEOS-C launch and early operation period.

Goad, C. C.↗
NASA NTRS1977

The N.A.S.A. earth and ocean dynamics programme

Practical applications of NASA space systems, science, and technology to the study of oceans and solid earth are discussed. Goals involving earth dynamics include earthquake hazard assessment and alleviation, and global surveying and mapping, while goals involving ocean dynamics include the determination of ocean currents and circulation, and the monitoring of ocean surface conditions. Satellites used to obtain data are described, and projects such as the study of open ocean tides and earth motion determination are reviewed, with consideration given to the techniques (e.g., laser ranging, satellite-to-satellite track) used in these studies. Several physical phenomena, the extent to which they presently can be measured, and possible future requirements for more accurate measurements are examined.

Vonbun, F. O.↗
NASA NTRS1977

The vector classifier

A linear classifier is developed. The classifier algorithm derives, from the picture element (pixel) response values, the response values for a point (called footpoint) consisting of determined proportions of distinct and operator defined land surfaces. The algorithm decides whether the pixel contains the content of the defined surfaces by testing the footpoint to pixelpoint distance against an operator specified threshold value. The test can be either of statistical or geometric form. Those pixels which give a positive result to the test are subclassified according to the proportions of the distinct land surfaces. The practical characteristics of the classifier are discussed and the classification results achieved, in a number of test areas, are described. The artificial nature of the classifier assumptions relate to certain land surface conditions. Testing the suitability of the classifier for other conditions is discussed.

Mccloy, K. R.↗
NASA NTRS1978

Preliminary comparison of model and prototype wakes

Velocity and turbulence profiles previously measured in the wake of a long building 3.2 m high, located in the field, transverse to the wind and in an atmospheric boundary layer several hundred meters thick are compared with wake profiles at corresponding longitudinal stations for a scale model of the building located in a large meteorological wind tunnel having a boundary layer thickness of 0.61 m to assess the accuracy of full scale wake profile predictions based on model tests. Results are presented which show that disparities in nondimensional profiles result from differences in relative depth of logarithmic layers and in surface conditions.

Logan, E., Jr.↗
NASA NTRS1978

Alteration of glass as a possible source of clay minerals on Mars

Thermodynamic calculations show that, under present Martian surface conditions, favorable gas-solid weathering products of feldspar glasses should include beidellites (clays of the montmorillonite series) + carbonates + quartz. The gas-solid weathering of mafic silicate glass ( of volcanic or impact origin) may similarly favor the production of metastable Fe-rich montmorillonite clays. Simple mass-balance calculations suggest that gas-solid weathering of Martian proto-regolith containing 10% glass could conceivably produce a global blanket of clays at a rate of at least 0.4 cm/b.y. The production rate should be expected to increase significantly with the glass content and rate of reworking of the proto-regolith and with the availability of water. Complete extraction of altered glass from a lunar-like proto-regolith might yield a global Martian clay blanket about 10-100 cm in thickness.

Gooding, J. L.↗
NASA NTRS1979

Passive microwave applications to snowpack monitoring using satellite data

Nimbus-5 Electrically Scanned Microwave Radiometer data were analyzed for the fall of 1975 and winter and summer of 1976 over the Arctic Coastal Plain of Alaska to determine the applicability of those data to snowpack monitoring. It was found that when the snow depth remained constant at 12.7 cm, the brightness temperatures T sub B varied with air temperature. During April and May the production of ice lenses and layers within the snow, and possibly wet ground beneath the snow contribute to the T sub B variations also. Comparison of March T sub B values of three areas with the same (12.7 cm) snow depth showed that air temperature is the predominant factor controlling the T sub B differences among the three areas, but underlying surface conditions and individual snowpack characteristics are also significant factors.

Hall, D. K.↗