Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “spatial discretization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28
All sourcesNASA NTRSDOE OSTI
NASA NTRS1988

A source map for dust jets observed in the coma of Comet P/Halley

In this paper, the large-scale enhancements of about 50 s duration in the flux of submicron dust particles from Comet P/Halley recorded by the Dust Counter and Mass Analyzer carried aboard the two Vega spaceprobes are traced back to their source departure points on the nucleus. Evidence is presented that such enhancements which correspond to regions of enhanced particle density in the coma with spatial widths of about 4000 km, are superimposed upon a background flux distribution which is well described by a simple fountain model. Thus, dust production on the sunlit hemisphere of the nucleus is characterized by discrete jet sources superimposed upon relatively low-level isotropic emission. The jet sources at the nucleus responsible for the major enhancements in recorded particle impact rates are narrow and discrete, with each jet accelerating about 10 to the -13th g particles to a narrow range of terminal velocities which decrease with increasing particle mass.

Rabinowitz, D. L.↗
NASA NTRS1991

Time-dependent aerodynamic analysis of ducted and unducted propfans at angle of attack

A three-dimensional unsteady aerodynamic analysis is described for predicting the time-dependent flow about ducted and unducted propfans operating at angle of attack. Although the freestream is assumed to be uniform, the flow relative to the rotating blades varies with circumferential position, resulting in an inherent unsteadiness due to the nonaxial inflow. The time-dependent Euler equations are solved utilizing a Runge-Kutta time-stepping scheme. The analysis is based on a finite-volume discretization employing a multiple-block grid network. To permit the use of large calculation time steps, an implicit residual smoothing scheme previously tested for unsteady flow calculations in two dimensions is extended to three spatial dimensions. For unducted propfans, a single H-type grid block is used for each blade passage to determine the time-periodic flowfield. For ducted propfans (ultra-high bypass fans) a body-centered C-type grid is wrapped about the cowl to improve the accuracy of the analysis in the high gradient flow region near the cowl leading edge. Numerical results are compared with available data for both ducted and unducted propfans operating at angle of attack.

Hall, Edward J.↗
NASA NTRS1993

The theoretical accuracy of Runge-Kutta time discretizations for the initial boundary value problem: A careful study of the boundary error

The conventional method of imposing time dependent boundary conditions for Runge-Kutta (RK) time advancement reduces the formal accuracy of the space-time method to first order locally, and second order globally, independently of the spatial operator. This counter intuitive result is analyzed in this paper. Two methods of eliminating this problem are proposed for the linear constant coefficient case: (1) impose the exact boundary condition only at the end of the complete RK cycle, (2) impose consistent intermediate boundary conditions derived from the physical boundary condition and its derivatives. The first method, while retaining the RK accuracy in all cases, results in a scheme with much reduced CFL condition, rendering the RK scheme less attractive. The second method retains the same allowable time step as the periodic problem. However it is a general remedy only for the linear case. For non-linear hyperbolic equations the second method is effective only for for RK schemes of third order accuracy or less. Numerical studies are presented to verify the efficacy of each approach.

Carpenter, Mark H.↗
NASA NTRS1982

Satellite observations of suprathermal electron bursts

Data from the ISIS 2 satellite are used to study the spatial distribution of the suprathermal electron bursts discovered by high-altitude sounding rockets. It is found that the bursts form an integral part of the boundary plasma sheet and are linked with the formation of discrete auroral arcs. The maximum energy of the bursts is always below the peak energy in neighboring discrete forms, and it appears that if the bursts fail to reach the minimum energy found to be necessary to sustain a discrete arc they collapse within a few seconds. It is suggested that in a pass across the auroral oval the overall envelope of the maximum energy in bursts and the peak energy in discrete auroral forms reflect the variation of the available acceleration (perhaps a parallel electric potential) across the auroral oval while the energy structure in individual forms is a function of the nonlinear processes which sustain them. This explanation appears to resolve the apparent discrepancy in scale thickness between rocket and satellite inverted V's.

Johnstone, A. D.↗
NASA NTRS1987

Evolution of a localized thermal explosion in a reactive gas

Experimental observations of ignition in premixed gaseous reactants indicate that perfectly homogeneous initiation is practically unrealizable. Instead, combustion first sets in, as a rule, at small, discrete sites where inherent inhomogeneities cause chemical activity to proceed preferentially and lead to localized explosions. Combustion waves propagating away from these hot spots or reaction centers eventually envelop the remaining bulk. This study examines the spatial structure and temporal evolution of a hot spot for a model involving Arrhenius kinetics. The hot spot, characterized by peaks in pressure and temperature with little diminution in local density, is shown to have one of two possible self-similar structures. The analysis employs a combination of asymptotics and numerics, and terminates when pressure and temperature in the explosion have peaked.

Jackson, T. L.↗
NASA NTRS2019

Assessment of Buffet Forcing Function Development Process Using Unsteady Pressure Sensitive Paint

A wind tunnel test was conducted at the Ames Unitary Plan Wind Tunnel to characterize the transonic buffet environment of a generic launch vehicle forebody. The test examined a highly instrumented version of the Coe and Nute Model 11 test article first tested in the 1960s. One of the measurement techniques used during this test was unsteady pressure sensitive paint (uPSP) developed at the Arnold Engineering Development Complex. This optical measurement technique measured fluctuating pressures at over 300,000 locations on the surface of the model. The high spatial density of these measurements provided an opportunity to examine in depth the assumptions underpinning the development of buffet forcing functions (BFFs) used in the development of the Space Launch System vehicle. The comparison of discrete-measurement-based BFFs to BFFs developed by continuous surface pressure integration indicates that the current BFF development approach under predicts low frequency content of the BFFs while over predicting high frequency content. Coherence-based adjustments employed to reduce over prediction in the surface integration of discrete pressure measurements contribute to the inaccuracy of the BFFs and their implementation should be reevaluated.

Sekula, Martin K.↗
NASA NTRS1991

On the wall-normal velocity of the compressible boundary-layer equations

Numerical methods for the compressible boundary-layer equations are facilitated by transformation from the physical (x,y) plane to a computational (xi,eta) plane in which the evolution of the flow is 'slow' in the time-like xi direction. The commonly used Levy-Lees transformation results in a computationally well-behaved problem for a wide class of non-similar boundary-layer flows, but it complicates interpretation of the solution in physical space. Specifically, the transformation is inherently nonlinear, and the physical wall-normal velocity is transformed out of the problem and is not readily recovered. In light of recent research which shows mean-flow non-parallelism to significantly influence the stability of high-speed compressible flows, the contribution of the wall-normal velocity in the analysis of stability should not be routinely neglected. Conventional methods extract the wall-normal velocity in physical space from the continuity equation, using finite-difference techniques and interpolation procedures. The present spectrally-accurate method extracts the wall-normal velocity directly from the transformation itself, without interpolation, leaving the continuity equation free as a check on the quality of the solution. The present method for recovering wall-normal velocity, when used in conjunction with a highly-accurate spectral collocation method for solving the compressible boundary-layer equations, results in a discrete solution which is extraordinarily smooth and accurate, and which satisfies the continuity equation nearly to machine precision. These qualities make the method well suited to the computation of the non-parallel mean flows needed by spatial direct numerical simulations (DNS) and parabolized stability equation (PSE) approaches to the analysis of stability.

Pruett, C. David↗
NASA NTRS1993

Compression of spectral meteorological imagery

Data compression is essential to current low-earth-orbit spectral sensors with global coverage, e.g., meteorological sensors. Such sensors routinely produce in excess of 30 Gb of data per orbit (over 4 Mb/s for about 110 min) while typically limited to less than 10 Gb of downlink capacity per orbit (15 minutes at 10 Mb/s). Astro-Space Division develops spaceborne compression systems for compression ratios from as little as three to as much as twenty-to-one for high-fidelity reconstructions. Current hardware production and development at Astro-Space Division focuses on discrete cosine transform (DCT) systems implemented with the GE PFFT chip, a 32x32 2D-DCT engine. Spectral relations in the data are exploited through block mean extraction followed by orthonormal transformation. The transformation produces blocks with spatial correlation that are suitable for further compression with any block-oriented spatial compression system, e.g., Astro-Space Division's Laplacian modeler and analytic encoder of DCT coefficients.

Miettinen, Kristo↗
NASA NTRS2008

Derivation of Aero-Induced Fluctuating Pressure Environments for Ares I-X

A description is given of the external aero-inducted fluctuating pressure model which was fit and anchored to wind tunnel data from the past 40 years. This model is based upon the assumption that the flow around a vehicle can be divided into discrete flow zones with independent fluctuating pressure properties. The model is then used to derive fluctuating pressure environments during ascent for the Ares I-X test vehicle. A sensitivity study of the structural response to the spatial correlation of the fluctuating pressures is also performed.

Yang, Michael Y.↗
NASA NTRS1995

Sensitivity analysis of the non-linear dynamic viscoplastic response of 2-d structures with respect to material parameters

A computational procedure is presented for evaluating the sensitivity coefficients of the viscoplastic response of structures subjected to dynamic loading. A state of plane stress is assumed to exist in the structure, a velocity strain-Cauchy stress formulation is used, and the geometric non-linearities arising from large strains are incorporated. The Jaumann rate is used as a frame indifferent stress rate. The material model is chosen to be isothermal viscoplasticity, and an associated flow rule is used with a von Mises effective stress. The equations of motion emanating from a finite element semi-discretization are integrated using an explicit central difference scheme with an implicit stress update. The sensitivity coefficients are evaluated using a direct differentiation approach. Since the domain of integration is the current configuration, the sensitivity coefficients of the spatial derivatives of the shape functions must be included. Numerical results are presented for a thin plate with a central cutout subjected to an in-plane compressive loading. The sensitivity coefficients are generated by evaluating the derivatives of the response quantities with respect to Young's modulus, and two of the material parameters characterizing the viscoplastic response. Time histories of the response and sensitivity coefficients, and spatial distributions at selected times are presented.

Kulkarni, Makarand↗
NASA NTRS1999

Some Characteristics of the Martian Aphelion Global Cloud Belt

The presence of discrete condensate clouds on Mars is certainly not a new discovery, having been observed through most of the documented history of telescopic monitoring. Furthermore, spacecraft data have been used to study discrete cloud features in the Martian atmosphere in greater detail, e.g., morphology, seasonal occurrence. Condensate clouds, specifically discrete water ice clouds, appeared to be regarded as fairly common but, with the possible exception of the polar regions, generally uninteresting from a climatological point of view. However, recent observations indicate that in addition to their large spatial scale, the water ice clouds may in fact play a more prominent role in the Martian climate. In this paper, we wish to examine the spatial and temporal variations of the cloud belt optical depth, as well as the microphysical characteristics of the water ice particles themselves.

Wolff, M. J.↗
NASA NTRSDate not supplied

Noise Reduction and Calibration for Aeroacoustic Loads from Unsteady Pressure-Sensitive Paint

Unsteady pressure-sensitive paint (uPSP) is a significant new technology for high spatial resolution measurement of complex dynamic surface pressure loading on a wind tunnel model, to better define flight vehicle buffet and aeroacoustic loads. Compared with the very sparse surface pressure measurements of traditional sensors, the pressure sensitivity of uPSP light reflectivity provides a visual measure of surface pressure fluctuations over a wide area illuminated by high intensity light, captured by a high-speed digital camera. Panda et al (AIAA Journal, May 2019) have shown good data is recoverable up to 10 kHz. In cases where available uPSP luminescence is low for a painted wind tunnel test model, significant noise levels have been observed primarily due to the discrete photon arrival variability of low intensity light (termed “shot noise”). In this case, uPSP measurements can exhibit unusually low signal to noise ratio (SNR of 0.1 or less). This paper will report on latest work to recover calibrated uPSP measurements which are noise free over a useful dynamic range of 10-15 dB. It will be shown how the distinct spatial correlations of both the shot noise and the underlying aeroacoustic surface pressure play an important role in obtaining a reliable measurement.

pressure-sensitive paint↗
NASA NTRS1977

Finite element analysis of aeroacoustic jet-flap flows

A computational analysis was performed on the steady, turbulent aerodynamic flowfields associated with a jet-blown flap. For regions devoid of flow separation, a parabolic approximation to the governing time-averaged Navier-Stokes equations was applied. Numerical results are presented for the symmetry plane flow of a slot-nozzle planar jet flap geometry, including prediction of flowfield evolution within the secondary mixing region immediately downstream of the trailing edge. Using a two equation turbulence kinetic energy closure model, rapid generation and decay of large spatial gradients in mean and correlated fluctuating velocity components within the immediate wake region were predicted. Modifications to the turbulent flow structure, as induced by porous surface treatment of the flap, were evaluated. The recirculating flow within a representative discrete slot in the surface was evaluated, using the two dimensional, time-averaged Navier-Stokes equations.

Baker, A. J.↗
NASA NTRS1989

Interactive displays in medical art

Medical illustration is a field of visual communication with a long history. Traditional medical illustrations are static, 2-D, printed images; highly realistic depictions of the gross morphology of anatomical structures. Today medicine requires the visualization of structures and processes that have never before been seen. Complex 3-D spatial relationships require interpretation from 2-D diagnostic imagery. Pictures that move in real time have become clinical and research tools for physicians. Medical illustrators are involved with the development of interactive visual displays for three different, but not discrete, functions: as educational materials, as clinical and research tools, and as data bases of standard imagery used to produce visuals. The production of interactive displays in the medical arts is examined.

Mcconathy, Deirdre Alla↗
NASA NTRS1993

Radiative transfer in three-dimensional atmosphere-vegetation media

The problem of radiation transfer in three-dimensional atmosphere-vegetation media is formulated in this paper. The atmosphere is treated as a horizontally homogeneous medium but with spatially varying anisotropic lower boundary. The boundary condition is defined in terms of vegetation canopy bidirectional reflectance factors to be evaluated from a numerical solution of the three-dimensional canopy radiative transfer equation. Numerical results obtained with the discrete ordinates method are in good agreement with the Monte Carlo results of Pearce and field soybean reflectance data of Ranson et al.

Myneni, Ranga B.↗
NASA NTRS2003

Diffraction Efficiency of Thin Film Holographic Beam Steering Devices

Dynamic holography has been demonstrated as a method for correcting aberrations in space deployable optics, and can also be used to achieve high-resolution beam steering in the same environment. In this paper, we consider some of the factors affecting the efficiency of these devices. Specifically, the effect on the efficiency of a highly collimated beam from the number of discrete phase steps per period is considered for a blazed thin film beam steering grating. The effect of the number of discrete phase steps per period on steering resolution is also considered. We also present some result of Finite-Difference Time-Domain (FDTD) calculations of light propagating through liquid crystal "blazed" gratings. Liquid crystal gratings are shown to spatially modulate both the phase and amplitude of the propagating light.

Titus, Charles M.↗
NASA NTRS1987

Rotational modulation and flares on RS CVn and BY Dra stars. IV - The spatially resolved chromosphere of AR Lacertae

The authors observed the RS Canum Venaticorum system AR Lacertae systematically over an orbital period with the International Ultraviolet Explorer in October 1983. Contemporaneous radio observations were obtained at the VLA. The spectra of the Mg II k emission line were analyzed using a Doppler imaging technique. In this way, three discrete regions of emission were identified in the outer atmosphere of the K star-two 'plages' and a chromospheric brightening that was related to a radio flare. The widths of the plage profiles indicate that the two plages together cover about 2 percent of the visible stellar hemisphere, and their v sin i values indicate that they lie close to the equator of the K star. The Mg II k surface flux in the plages is about five times the mean Mg II k surface flux of the K star.

Walter, F. M.↗
NASA NTRSDate not supplied

In Situ Water Quality Data for the Chesapeake Bay

This paper examines in situ water quality datameasured during2020-2021in the Chesapeake Bay for comparison with optical satellite data. Thiscollection was performed as part of a NASA project aiming to develop new methods for water quality monitoring from satellite remote sensingusing artificial intelligence. Our objective is to use insitu data as ground-truth to provide water quality classifications, or labels,to their overlapping (in time and location)satellite imagery. Having such labeled data, can help us achieve our project’s longer-termgoal:to train artificial intelligencemodelsto recognize features in spectral informationfor monitoringwater qualityfrom satellites. Because routine monitoring by state agencies is conducted at discrete locations, we obtained a flow-through system operated from small boats to measure waterquality parameters along transects for comparison with two-dimensional maps collected from space, with an initial focus on low oxygenevents, due to their large spatial extent and regular occurrence each summer.We also evaluated similar in situ data collected during 1984-2021by the Chesapeake Program.

Nargess Memarsadeghi↗