Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “spatial analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28
All sourcesNASA NTRSDOE OSTI
NASA NTRS2009

Multiple-Point Mass Flux Measurement System Using Rayleigh Scattering

A multiple-point Rayleigh scattering diagnostic is being developed to provide mass flux measurements in gas flows. Spectroscopic Rayleigh scattering is an established flow diagnostic that has the ability to provide simultaneous density, temperature, and velocity measurements. Rayleigh scattered light from a focused 18 Watt continuous-wave laser beam is directly imaged through a solid Fabry-Perot etalon onto a CCD detector which permits spectral analysis of the light. The spatial resolution of the measurements is governed by the locations of interference fringes, which can be changed by altering the etalon characteristics. A prototype system has been used to acquire data in a Mach 0.56 flow to demonstrate feasibility of using this system to provide mass flux measurements. Estimates of measurement uncertainty and recommendations for system improvements are presented

Mielke, Amy F.↗
NASA NTRS2012

Spatially Refined Aerosol Direct Radiative Forcing Efficiencies

Global aerosol direct radiative forcing (DRF) is an important metric for assessing potential climate impacts of future emissions changes. However, the radiative consequences of emissions perturbations are not readily quantified nor well understood at the level of detail necessary to assess realistic policy options. To address this challenge, here we show how adjoint model sensitivities can be used to provide highly spatially resolved estimates of the DRF from emissions of black carbon (BC), primary organic carbon (OC), sulfur dioxide (SO2), and ammonia (NH3), using the example of emissions from each sector and country following multiple Representative Concentration Pathway (RCPs). The radiative forcing efficiencies of many individual emissions are found to differ considerably from regional or sectoral averages for NH3, SO2 from the power sector, and BC from domestic, industrial, transportation and biomass burning sources. Consequently, the amount of emissions controls required to attain a specific DRF varies at intracontinental scales by up to a factor of 4. These results thus demonstrate both a need and means for incorporating spatially refined aerosol DRF into analysis of future emissions scenario and design of air quality and climate change mitigation policies.

Climate↗
NASA NTRSDate not supplied

TPSAS-NF1676L-21193-DND

Researchers at NASA Langley Research Center have been developing an automated pattern recognition algorithm to identify overshooting convective cloud tops (OTs) in support of the GOES-R satellite program. This algorithm identify regions of overshooting at the individual 1-4 km geostationary satellite pixel scale using visible (during daytime only) and infrared channel imagery and numerical weather analysis data. The algorithm has been developed based upon analysis of 0.25-1 km spatial resolution Aqua MODIS imagery, using a database of over 2000 manually identified OT features throughout the world in storms with varying intensity and morphology. The OT database includes storms ranging from small, warm topped cells in Alaska and Mongolia, tornadic supercells over the U.S. Central Plains and Europe, large tropical mesoscale convective systems, and overshooting in the eyewalls and spiral bands of category 5 tropical cyclones. This database is available for use by the research community. The algorithm is designed to operate on data from any current and historical satellite imager, allowing for development of a highly accurate global OT detection climatology that extends back into the 1990's at up to a 15-30 min temporal resolution throughout the diurnal cycle. As members of the McIDAS Users Group, NASA LaRC has immediate access to the full global archive of geostationary imager data which would allows rapid development of OT climatologies and short-term databases. This type of capability has never been available within the weather and climate research community. Regional geostationary OT databases have been already developed over CONUS during SEAC4RS, for 18-years over the Eastern U.S., and for 5-10 years over Australia, Europe, Southeast Asia, and East Africa among many other regions. Some of these datasets are being used by climate researchers and private industry to examine UTLS-penetrating storm spatial distributions and their temporal variability, in addition to weather hazards associated with these storms at unprecedented spatial detail. This presentation will describe the OT pattern recognition algorithm and highlight recent product applications.

Kristopher Bedka↗
NASA NTRS2022

Changes in Land Use Enhance the Sensitivity of Tropical Ecosystems to Fire-Climate Extremes

The Pantanal, the largest contiguous wetland in the world with a high diversity of ecosystems and habitat for several endangered species, was impacted by record-breaking wildfires in 2020. In this study, we integrate satellite and modeling data that enable exploration of natural and human contributing factors to the unprecedented 2020 fires. We demonstrate that the fires were fueled by an exceptional multi-year drought, but dry conditions solely could not explain the spatial patterns of burning. Our analysis reveals how human-caused fires exacerbated drought effects on natural ecosystem within the Pantanal, with large burned fractions primarily over natural (52%), and low cattle density areas (44%) in 2020. The post-fire ecosystem and hydrology changes also had strong ecological effects, with vegetation productivity less than − 1.5 σ over more than 30% of the natural and conservation areas. In contrast to more managed areas, there was a clear decrease in evaporation (by ~ 9%) and an increase in runoff (by ~ 5%) over the natural areas, with long-term impacts on ecosystem recovery and fire risk. This study provides the first tropical evidence outside rainforests of the synergy between climate, land management and fires, and the associated impacts on the ecosystem and hydrology over the largest contiguous wetlands in the world.

Sujay Kumar↗
NASA NTRSDate not supplied

The effects of preconditioning on the summer sea ice thickness evolution during MOSAiC

The central role of sea ice within the Arctic climate system is clear, as is the importance of sea ice properties in the Arctic Ocean’s evolution and response to climate change. Less clear is how the history of the sea ice floe (in winter and spring) precondition the summer thickness evolution. Accurate accounting for the collective influences of processes that affect the summer sea ice thickness evolution is necessary for determining sea ice survivability and the rate of future sea ice loss. In this study, we use a satellite-derived sea ice parcel database co-located with the MOSAiC floe to explore the factors that precondition the summer sea ice thickness evolution. First. we compare the >500 collocated satellite-tracked sea ice parcels that intersected the MOSAiC drift track with observations to evaluate the satellite-derived surface energy budget and surface properties, finding agreement with correlations >0.9. Approximately 60% of the satellite tracked parcels survived the summer melt season. Secondly, we explore the spread in sea ice thickness and survivability across the satellite-tracked parcels, finding contributions from spring/summer surface albedo evolution, surface temperature, clouds, and parcel sea ice concentration. The satellite tracked sea ice parcel analysis provides insights into the spatial coherence of the factors that influence sea ice thickness evolution.

Arctic↗
NASA NTRSDate not supplied

Monitoring Vegetation Impacts of Night Penning in Idaho and Oregon Grazing Allotments Using Remote Sensing

The practice of night penning, which involves corralling livestock into a fenced, secure area overnight, aims to safeguard animals from predators. Although this method has proven successful in minimizing interactions between livestock and wildlife, the extent of its impact on vegetation communities is still being explored. In this study, we used the Rangeland Analysis Platform (RAP), which aggregates spatially distributed values of vegetation composition, cover, and productivity from the Landsat missions, to quantify the effects of night penning on rangeland vegetation communities. We identified control sites that had similar topographic characteristics to night pen sites used by ranchers in Idaho and Oregon. We then quantified and compared changes in annual net primary productivity (NPP) between night pen and control sites. Our study found that RAP NPP data did not show a noticeable difference between control sites and night penning sites. When analyzed quantitatively, night pen sites showed variability in NPP before and after night penning; however, there were few discernible differences between night pen sites and control sites, suggesting that climate conditions can have more of an effect on NPP measurements compared to land management decisions. In the summer of 2024, field crews from the Natural Resource Ecology Laboratory collected biomass data from these rangeland sites, and this will be used to compare and validate RAP products while continuing to investigate the effects of night penning.

Truman Anarella↗
NASA NTRS2005

Geospatial Analysis and Remote Sensing from Airplanes and Satellites for Cultural Resources Management

Cultural resource management consists of research to identify, evaluate, document and assess cultural resources, planning to assist in decision-making, and stewardship to implement the preservation, protection and interpretation of these decisions and plans. One technique that may be useful in cultural resource management archaeology is remote sensing. It is the acquisition of data and derivative information about objects or materials (targets) located on the Earth's surface or in its atmosphere by using sensor mounted on platforms located at a distance from the targets to make measurements on interactions between the targets and electromagnetic radiation. Included in this definition are systems that acquire imagery by photographic methods and digital multispectral sensors. Data collected by digital multispectral sensors on aircraft and satellite platforms play a prominent role in many earth science applications, including land cover mapping, geology, soil science, agriculture, forestry, water resource management, urban and regional planning, and environmental assessments. Inherent in the analysis of remotely sensed data is the use of computer-based image processing techniques. Geographical information systems (GIS), designed for collecting, managing, and analyzing spatial information, are also useful in the analysis of remotely sensed data. A GIS can be used to integrate diverse types of spatially referenced digital data, including remotely sensed and map data. In archaeology, these tools have been used in various ways to aid in cultural resource projects. For example, they have been used to predict the presence of archaeological resources using modern environmental indicators. Remote sensing techniques have also been used to directly detect the presence of unknown sites based on the impact of past occupation on the Earth's surface. Additionally, remote sensing has been used as a mapping tool aimed at delineating the boundaries of a site or mapping previously unknown features. All of these applications are pertinent to the goals of site discovery and assessment in cultural resource management.

Giardino, Marco J.↗
NASA NTRS2000

The Urban Fabric of the City as Its Affects Thermal Energy Responses Derived from Remote Sensing Data

The physical geography of the city affects numerous aspects of its interlinked biophysical, social, and land-atmosphere characteristics - those attributes that come together to form the total urban environment. One approach to studying the multitude of interactions that occur as a result of urbanization is to view the city from a systems ecology perspective, where energy and material cycle into and out of the urban milieu. Thus, the urban ecosystem is synergistic in linking land, air, water, and living organisms in a vast network of interrelated physical, human, and biological process. Given the number and the shear complexity of the exchanges and, ultimately, their effects, that occur within the urban environment, we are focusing our research on looking at how the morphology or urban fabric of the city, drives thermal energy exchanges across the urban landscape. The study of thermal energy attributes for different cities provides insight into how thermal fluxes and characteristics are partitioned across the city landscape in response to each city's morphology. We are using thermal infrared remote sensing data obtained at a high spatial resolution from aircraft, along with satellite data, to identify and quantify thermal energy characteristics for 4 U.S. cities: Atlanta, GA, Baton Rouge, LA, Salt Lake City, UT, and Sacramento, CA. Analysis of how thermal energy is spatially distributed across the urban landscapes for these cities provides a unique perspective for understanding how the differing morphology of cities forces land-atmosphere exchanges, such as the urban heat island effect, as well as related meteorological and air quality interactions. Keyword: urban ecosystems, remote sensing, urban heat island

Quattrochi, Dale A.↗
NASA NTRS1999

Synthetic Scene Generation of Stennis Target Range for the Calibration of Remote Sensing Systems

The validation and verification (V&V) target range developed at Stennis Space Center is a useful tool for the calibration of remote sensing systems. In this paper, we present an algorithm for generating synthetic scenes or digital models of this target range. The atmospheric radiative transfer code Modtran 4 is used in simulating at-sensor radiance for a given sensor. Software is developed to generate the scene with different spatial and spectral resolutions using the at-sensor radiance values. Synthetic scenes provide a cost-effective way for in-flight validation for the spatial and radiometric accuracy of the data. Other applications include mission planning, sensor simulation, and trade-off analysis in sensor design. The radiometric and spatial accuracy of the simulation is evaluated by comparing simulated scenes with AVIRIS acquired values.

Cao, Chang-Yong↗
NASA NTRS1991

Representation of vegetation by continental data sets derived from NOAA-AVHRR data

Images of the normalized difference vegetation index (NDVI) are examined with specific attention given to the effect of spatial scales on the understanding of surface phenomena. A scale variance analysis is conducted on NDVI annual and seasonal images of Africa taken from 1987 NOAA-AVHRR data at spatial scales ranging from 8-512 km. The scales at which spatial variation takes place are determined and the relative magnitude of the variations are considered. Substantial differences are demonstrated, notably an increase in spatial variation with coarsening spatial resolution. Different responses in scale variance as a function of spatial resolution are noted in an analysis of maximum value composites for February and September; the difference is most marked in areas with very seasonal vegetation. The spatial variation at different scales is attributed to different factors, and methods involving the averaging of areas of transition and surface heterogeneity can oversimplify surface conditions. The spatial characteristics and the temporal variability of areas should be considered to accurately apply satellite data to global models.

Justice, C. O.↗
NASA NTRS1999

SERTS-95 Measurements of Wavelength Shifts in Coronal Emission Lines Across a Solar Active Region

We used slit spectra from the 1995 flight of Goddard Space Flight Center's Solar EUV Rocket Telescope and Spectrograph (SERTS-95) to measure wavelength shifts of coronal emission lines in the core of NOAA active region 7870 relative to its immediate surroundings (its "edge"). This method circumvents the unavailability of reliable laboratory rest wavelengths for the observed lines by using wavelengths from the edge spectrum as references. We derived the, SERTS-95 wavelength calibration from measurements of a post-flight laboratory spectrum containing 28 He II and Ne II EUV standard wavelengths known to high accuracy. Wavelength measurements for lines of He I, Ne III, and additional lines of Ne II in the laboratory calibration spectrum provide more accurate values than were previously available, enabling these lines also to serve as future calibration standards. Six solar lines were chosen for this study, namely, He II at 303.78 A, Fe XII at 193.51 A, Fe XIII at 202.05 A, Fe XIV at 211.33 A, Fe XV at 284.15 A, and Fe XVI at 335.41 A. Because these lines are free from known blends in the SERTS-95 spectra and are either intrinsically strong or near the SERTS-95 peak sensitivity, they are our most reliable lines for measuring relative wavelength shifts in the spatially resolved active region core spectra. The iron ions are the hottest ions ever used for this type of analysis. All six lines reveal statistically significant spatial variations in their measured relative wavelength shifts in the active region core, including mixtures of blueshifts and redshifts (each with maximum values corresponding to relative Doppler velocities approximately 15 km/s), indicating a dynamic, turbulent corona. For each of these lines we calculated weighted-average relative Doppler velocities from the wavelength shifts in the spatially resolved core spectra by weighting the shifts in the individual spatial pixels with their respective measurement uncertainties.

Brosius, Jeffery W.↗
NASA NTRS2021

Investigating Wintertime GPM-IMERG Precipitation in the North Atlantic

Precipitation is expected to increase in a warming climate, which can have profound impacts on local and global hydrologic budgets. However, the precipitation in high latitudes remains highly uncertain. We compare wintertime precipitation in the North Atlantic using GPM-IMERG, GPCP, MERRA-2 and ERA5 between 2000–2019 and show that while interannual variations between products are similar, large differences in magnitudes exist, specifically in areas of higher precipitation where Integrated Multi-satellitE Retrievals for GPM (IMERG) produces an excess of 2 mm day−1. EOF analysis demonstrates observations and reanalyses show similar spatial variability in the most dominant precipitation patterns and are highly correlated (r = −0.6) with the North Atlantic Oscillation. Analysis of IMERG extreme precipitation further shows that it is most densely populated in this same area where large discrepancies in magnitudes between products exist. IMERG extreme precipitation was found to drive the monthly anomalies. Future work needs to be focused on extreme precipitation characteristics, patterns and the driving atmospheric factors.

Linette Boisvert↗
NASA NTRS2002

Probing the Masses of the PSR JO621+1002 Binary System Through Relativistic Apsidal Motion

Orbital, spin and astrometric parameters of the millisecond pulsar PSR J0621+1002 have been determined through six years of timing observations at three radio telescopes. The chief result is a measurement of the rate of periastron advance, omega=0 deg.0116 +/-0 deg.0008/yr. Interpreted as a general relativistic effect, this implies the sum of the pulsar mass, m(1), and the companion mass, m(2), to be M=m(1)+m(2)= 2.81 +/-0.30 solar mass. The Keplerian parameters rule out certain combinations of m(1) and m(2), as does the non-detection of Shapiro delay in the pulse arrival times. These constraints, together with the assumption that the companion is a white dwarf, lead to the maximum likelihood values m(1)=1.69((sup +0.30)(sub -0.30)) solar mass and m(2)=0.98((sup +0.32)(sub -0.12) solar mass (68% confidence). The other major finding is that the pulsar experiences dramatic variability in its dispersion measure (DM), with gradients as steep as 0.013 pc/cu cm/yr. A structure function analysis of the DM variations uncovers spatial fluctuations in the interstellar electron density that cannot be fit to a single power law, unlike the Kolmogorov turbulent spectrum that has been seen in the direction of other pulsars. Other results from the timing analysis include the first measurements of the pulsar's proper motion, mu=3.5+/-0.3 mas/yr, and of its spin-down rate, dP/dt=4.7 x 10(exp -20), which, when corrected for kinematic biases and combined with the pulse period, P=28.8 ms, gives a characteristic age of 1.1 x 10(exp 10) yr and a surface magnetic field strength of 1.2 x 10 (exp 9) G.

Spaver, Eric M.↗
NASA NTRSDate not supplied

Newly Available Single Field-of-view Sounder Atmospheric Product (SiFSAP) and Its Derivative Product

The Single Field-of-view Sounder Atmospheric product (SiFSAP) has been developed and delivered to NASA GES DISC. The SiFSAP Algorithm Theoretical Basis Documents (ATBD) and users manuals are ready to be released to public. This novel data product supplements other operational products such as AIRS version 7 and the Community Long-term Infrared Microwave Combined Atmospheric Product System (CLIMCAPS) from two main perspectives: 1) improving the spatial resolution of sounder Level-2 data to extend its usage in weather and dynamics focus area; 2) establishing radiance closure between Level-2 data and directly measured Level-1 radiances to facilitate the climate trend analysis. SiFSAP has 3-times higher spatial resolution and 9-times denser data products comparing to current NASA and NOAA operational IR sounder products. SiFSAP is derived using the optimal estimation method based physical retrieval algorithm. The Principal Component-based Radiative Transfer Model (PCRTM) which includes the cloud scattering simulation is used for the forward model so that the solution can fit the spectral radiances under all-sky conditions for individual single field-of-view (SFOV) measurements. A general introduction of the SiFSAP algorithm and corresponding validation work will be presented. Also introduced here is the Climate Fingerprinting Sounder product (ClimFiSP) that is the derivative product of SiFSAP and will be released in the near future. The ClimFiSP algorithm uses pre-constructed fingerprinting relationship to achieve a low-latency Level-3 data production and facilitate the fusion of data of different sounders.

Wan Wu↗
NASA NTRS1969

Laser radar measurements of the aerosol content of the atmosphere

A summary of the results of laser radar observations of atmospheric aerosols is presented along with a description of the laser radar system devised during the study and of the data handling techniques utilized for the analysis of the data of the temporal and spatial distribution of atmospheric aerosols. Current research conducted by the group is directed toward the analysis of the frequency spectrum of laser radar echoes to obtain absolute measurements of the dust content of the atmosphere by resolving the molecular and aerosol contributions to the laser radar echoes.

Grams, G. W.↗
NASA NTRS2011

Characterization of Deficiencies in the Frequency Domain Forced Response Analysis Technique for Supersonic Turbine Bladed Disks

Turbine blades in rocket and jet engine turbomachinery experience enormous harmonic loading conditions. These loads result from the integer number of upstream and downstream stator vanes as well as the other turbine stages. Assessing the blade structural integrity is a complex task requiring an initial characterization of whether resonance is possible and then performing a forced response analysis if that condition is met. The standard technique for forced response analysis in rocket engines is to decompose a CFD-generated flow field into its harmonic components, and to then perform a frequency response analysis at the problematic natural frequencies. Recent CFD analysis and water-flow testing at NASA/MSFC, though, indicates that this technique may miss substantial harmonic and non-harmonic excitation sources that become present in complex flows. A substantial effort has been made to account for this denser spatial Fourier content in frequency response analysis (described in another paper by the author), but the question still remains whether the frequency response analysis itself is capable of capturing the excitation content sufficiently. Two studies comparing frequency response analysis with transient response analysis, therefore, of bladed-disks undergoing this complex flow environment have been performed. The first is of a bladed disk with each blade modeled by simple beam elements. Six loading cases were generated by varying a baseline harmonic excitation in different ways based upon cold-flow testing from Heritage Fuel Air Turbine Test. It was hypothesized that the randomness and other variation from the standard harmonic excitation would reduce the blade structural response, but the results showed little reduction. The second study was of a realistic model of a bladed-disk excited by the same CFD used in the J2X engine program. It was hypothesized that enforcing periodicity in the CFD (inherent in the frequency response technique) would overestimate the response. The results instead showed that the transient analysis results were up to 10% higher for "clean" nodal diameter excitations and six times larger for "messy" excitations, where substantial Fourier content around the main harmonic exists. Because the bulk of resonance problems are due to the "clean" excitations, a 10% underprediction is not necessarily a problem, especially since the average response in the transient is similar to the frequency response result, and so in a realistic finite life calculation, the life would be same. However, in the rare cases when the "messy" excitations harmonics are identified as the source of potential resonance concerns, this research does indicate that frequency response analysis is inadequate for accurate characterization of blade structural capability.

Brown, Andrew M.↗
NASA NTRS1984

Impact of Thematic Mapper Sensor Characteristics on Classification Accuracy

A three factor (spectral, spatial, and radiometric resolution), two level (TM and MSS) analysis of variance (ANOVA) approach allowed evaluation of the effects of each factor individually and in all possible combinations. Digital classification accuracy was used as the figure of merit. Nine study sites in Washington, D.C. each of approximately 256 x 256 TM pixels, were randomly selected from the full scene for analysis. These results strongly suggest that the quantization level improvements and the addition of new spectral bands in the visible and middle IR regions (both afforded by the TM sensor design) can result in improved capabilities to accurately delineate land cover categories using a per point Gaussian maximum likelihood classifier. On the other hand, results indicate that the increase in spatial resolution to 30m does not significantly enhance classification accuracy. The spatial result points to an inherent limitation of a per point classifier and to the need to improve data analysis techniques to handle high spatial resolution data.

Williams, D. L.↗
NASA NTRS1983

Impact of thematic mapper sensor characteristics on classification accuracy

A three factor (spectral, spatial, and radiometric resolution), two level (TM and MSS) analysis of variance (ANOVA) approach allowed evaluation of the effects of each factor individually and in all possible combinations. Digital classification accuracy was used as the figure of merit. Nine study sites in Washington, DC, each of approximately 256 x 256 TM pixels, were randomly selected from the full scene for analysis. These results strongly suggest that the quantization level improvements and the addition of new spectral bands in the visible and middle IR regions (both afforded by the TM sensor design) can result in improved capabilities to accurately delineate land cover categories using a per point Gaussian maximum likelihood classifier. On the other hand, results indicate that the increase in spatial resolution to 30 m does not significantly enhance classification accuracy. The spatial result points to an inherent limitation of a per point classifier and to the need to improve data analysis techniques to handle high spatial resolution data.

Williams, D. L.↗